ppCfgPortLocUserIndication

PACKETPORT-MIB · .1.3.6.1.4.1.4115.10.1.1.1.21
MIB view Table view

Object

column r/w Enumeration 
Treatement/Tone applied in loss of communication (LOC) scenarios.

Context

MIB
PACKETPORT-MIB
OID
.1.3.6.1.4.1.4115.10.1.1.1.21
Type
column
Access
readwrite
Status
current
Parent
ppCfgPortEntry
Table
ppCfgPortTable
Siblings
24

Syntax

Enumeration

Values & Constraints

Enumerated Values
0silence
1reorderTone

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ppCfgPortPortNumber
The unique value which identifies the port.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4115.10.1.1.1.1
ppCfgPortDialToneTimeOut obsolete
Dial tone time out value.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.10
ppCfgPortMsgWaitTimeOut obsolete
Message waiting time out value.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.11
ppCfgPortOffHookWarnTimeOut obsolete
Off hook warning time out value.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.12
ppCfgPortRingingTimeOut obsolete
Ringing time out value.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.13
ppCfgPortRingBackTimeOut obsolete
RingBack time out value.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.14
ppCfgPortReorderTimeOut obsolete
Reorder time out value.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.15
ppCfgPortStutterDialToneTimeOut obsolete
Stutter dial tone time out value
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.16
ppCfgPortMaxWaitDelay obsolete
This object contains the maximum number of seconds a MTA waits after a restart.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.17
ppCfgPortCallAgentUdpPort
This object contains the call agent udp port that is being used for this instance of call signaling.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.18
ppCfgPortTxGainControl
The gain control setting (dB) in the upstream, or A-to-D, direction. Setting this value for either line will take affect on ALL telephony lines.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.19
ppCfgPortAdminState
The administrative state of the line.
columnEnumeration.1.3.6.1.4.1.4115.10.1.1.1.2
ppCfgPortRxGainControl
The gain control setting (dB) in the downstream, or D-to-A, direction. Setting this value for either line will take affect on ALL telephony lines.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.20
ppCfgPortPacketizationPeriod obsolete
The per line packetization period for codec type.
columnmilliseconds PacketizationPeriodType.1.3.6.1.4.1.4115.10.1.1.1.22
ppCfgPortCodec obsolete
The per line codec type gxxxx.
columnCodecType.1.3.6.1.4.1.4115.10.1.1.1.23
ppCfgPortDialingMethod deprecated
Indicates the method used to dial the digits for this telephony endpoint. If tone(1), tone dialing (DTMF) is used. If pulse(2), dial-pulse signaling is used to dial the digits, T…
columnEnumeration.1.3.6.1.4.1.4115.10.1.1.1.24
ppCfgPortT38MaxDatagram
Specifies the T38 Max Datagram size for incoming T38 packets. If this is used to allow larger incoming T38 packets then the Call Agent must allocate more bandwidth accordingly
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.25
ppCfgPortCallAgentName
Call agent domain name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4115.10.1.1.1.3
ppCfgPortCallAgentIpAddress obsolete
Call Agent IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4115.10.1.1.1.4
ppCfgPortProvSignalingProt obsolete
The provisioned signaling protocol on the port.
columnSignalingProtocol.1.3.6.1.4.1.4115.10.1.1.1.5
ppCfgPortLoopCurrent
This object provides the ability to set the loop current high or low.
columnEnumeration.1.3.6.1.4.1.4115.10.1.1.1.6
ppCfgPortTpar obsolete
This object contains the maximum value of partial dial timeout in seconds.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.7
ppCfgPortTcrit obsolete
This object contains the maximum value of critical dial timeout in seconds.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.8
ppCfgPortBusyToneTimeOut obsolete
Busy tone time out value.
columnInteger32.1.3.6.1.4.1.4115.10.1.1.1.9