OS-PWE3-ICCP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
26

osPwe3IccpRGTable

table
.1.3.6.1.4.1.6926.2.29.1.2 · 1 row entry · 8 columns
Open in standard view 
Table of ICCP Redundancy Groups
osPwe3IccpRGEntry entry .1.3.6.1.4.1.6926.2.29.1.2.1
ICCP Redundancy Group Entry
Indexes
osPwe3IccpRGIndex
Column Syntax OID
osPwe3IccpRGIndex
ICCP Redundancy Group Index (must be the same as define in the peer node)
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6926.2.29.1.2.1.1
osPwe3IccpRGSenderName
The name of the node to be advertise by the ICCP protocol
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.6926.2.29.1.2.1.2
osPwe3IccpRGPeerAddrType
Peer node IP address type for establishment of RG
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6926.2.29.1.2.1.3
osPwe3IccpRGPeerAddr
Peer node IP address for establishment of RG
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6926.2.29.1.2.1.4
osPwe3IccpRGStatus
-NON EXISTENT: This state is the starting point for the state
machine.It indicates that no ICCP connection exists and that
there's no LDP session established between the PEs.

-INITIALIZED: This state indi…
IccpStatus
Textual Convention: IccpStatus Enumeration
Type Values:
0nonExistent
1initialized
2capSent
3capRecv
4connecting
5operational
 .1.3.6.1.4.1.6926.2.29.1.2.1.5
osPwe3IccpRGBfdRef
Reference index to BFD session monitoring the connectivity with the peer node.
CLI command : liveliness bfd
BfdStatusr/w
Textual Convention: BfdStatus Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.6926.2.29.1.2.1.6
osPwe3IccpRGLastError
Last configuration error description.
OctetString
Constraints:
range: 0-160
 .1.3.6.1.4.1.6926.2.29.1.2.1.89
osPwe3IccpRGRowStatus
Description.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6926.2.29.1.2.1.90

osPwe3IccpMlacpAppTable

table
.1.3.6.1.4.1.6926.2.29.1.3 · 1 row entry · 7 columns
Open in standard view 
Description.
osPwe3IccpMlacpAppEntry entry .1.3.6.1.4.1.6926.2.29.1.3.1
Description.
Indexes
osPwe3IccpMlacpIndex
Column Syntax OID
osPwe3IccpMlacpIndex
Index of the mlacp application instance, must be equal to the ICCP RG index (osPwe3IccpRGIndex) to be used.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6926.2.29.1.3.1.1
osPwe3IccpMlacpChassisId
Chassis ID to be published by LACP of the trunk conencted to the mlacp
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6926.2.29.1.3.1.2
osPwe3IccpMlacpSystemMac
Assigns the common System MAC to be used for MC-LAG
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6926.2.29.1.3.1.3
osPwe3IccpMlacpSystemPriority
Assigns the system Priority as defined by LACP
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6926.2.29.1.3.1.4
osPwe3IccpMlacpLastError
Last configuration error description.
OctetString
Constraints:
range: 0-160
 .1.3.6.1.4.1.6926.2.29.1.3.1.5
osPwe3IccpMlacpStatus
mlacp session status
MlacpStatus
Textual Convention: MlacpStatus Enumeration
Type Values:
0nonExistent
1reset
2connSent
3connRecv
4connecting
5operational
 .1.3.6.1.4.1.6926.2.29.1.3.1.6
osPwe3IccpMlacpRowStatus
Description.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6926.2.29.1.3.1.7

osPwe3IccpMlacpAggTable

table
.1.3.6.1.4.1.6926.2.29.1.4 · 1 row entry · 11 columns
Open in standard view 
Table of mlacp aggregators
osPwe3IccpMlacpAggEntry entry .1.3.6.1.4.1.6926.2.29.1.4.1
Description.
Indexes
osPwe3IccpMlacpAggIndex
Column Syntax OID
osPwe3IccpMlacpAggIndex
mlacp Aggregator ID - must be the same index as the trunk index (osPortTrunkId) defined in osPortTrunkTable
Unsigned32
Constraints:
range: 1-128
 .1.3.6.1.4.1.6926.2.29.1.4.1.1
osPwe3IccpMlacpAggIccpIndex
ICCP RG index - osPwe3IccpRGIndex
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6926.2.29.1.4.1.2
osPwe3IccpMlacpAggMode
mlacp mode as either active-standby or active-active
first release does not support active-active
Enumerationr/w
Enumerated Values:
0undefined
1activeStandby
2activeActive
 .1.3.6.1.4.1.6926.2.29.1.4.1.3
osPwe3IccpMlacpAggRole
Define the node default mode as either active or standby
Enumerationr/w
Enumerated Values:
0undefined
1active
2standby
 .1.3.6.1.4.1.6926.2.29.1.4.1.4
osPwe3IccpMlacpAggActiveRole
Retrieve the node current mode as either active or standby
Enumeration
Enumerated Values:
0undefined
1active
2standby
 .1.3.6.1.4.1.6926.2.29.1.4.1.5
osPwe3IccpMlacpAggRevertive
Enables revertive switchover and configures the holdoff timer
-1 - Non Revertive
0-3600 - Revertive, time in seconds
Integer32r/w
Constraints:
range: -1-3600
 .1.3.6.1.4.1.6926.2.29.1.4.1.6
osPwe3IccpMlacpAggThreshold
Define the prectage of links in the trunk to initiate a failover:
i.e. if the trunk has 4 links and the value is set to 50,
only when more than 2 links will fail it will trigger the switching to the other RG PE to beco…
PrecentageInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.6926.2.29.1.4.1.7
osPwe3IccpMlacpAggCommand
This object manual controls the behavior of the aggergator,
The command will be accepted only when mlacp-aggr is configured as osPwe3IccpMlacpAggRole active(1)

none - normal operation of the mlac…
Enumerationr/w
Enumerated Values:
1none
2forceSwitch
3revertSwitch
 .1.3.6.1.4.1.6926.2.29.1.4.1.8
osPwe3IccpMlacpAggSwCause
The cause of the last switchower.
Enumeration
Enumerated Values:
0undefined
1local
2remote
3acFail
4force
5reverting
 .1.3.6.1.4.1.6926.2.29.1.4.1.9
osPwe3IccpMlacpAggLastError
Last configuration error description.
OctetString
Constraints:
range: 0-160
 .1.3.6.1.4.1.6926.2.29.1.4.1.89
osPwe3IccpMlacpAggRowStatus
Description.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6926.2.29.1.4.1.90