osPwe3IccpMlacpAggCommand
OS-PWE3-ICCP-MIB ·
.1.3.6.1.4.1.6926.2.29.1.4.1.8
Object
column
r/w
Enumeration
This object manual controls the behavior of the aggergator,
The command will be accepted only when mlacp-aggr is configured as osPwe3IccpMlacpAggRole active(1)
none - normal operation of the mlacp-aggr
forceSwitch - Force traffic to move away from the active node
as if there is a failure, traffic will not revert to the active
node as long as this command is set
revertSwitch - Revert back to Active node
Post failure-recovery the expected behavior is to revert back to the active node
The revert will happen after the timer has expired
To manualy switch back to the active node (in case of non-revert or before
revert time has expired) issue this command.
The value will be automatically set back to none(1) by
the device upon execution of the revert command.
Context
- MIB
- OS-PWE3-ICCP-MIB
- OID
.1.3.6.1.4.1.6926.2.29.1.4.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- osPwe3IccpMlacpAggEntry
- Table
- osPwe3IccpMlacpAggTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | forceSwitch |
3 | revertSwitch |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osPwe3IccpMlacpAggIndex mlacp Aggregator ID - must be the same index as the trunk index (osPortTrunkId) defined in osPortTrunkTable | column | Unsigned32 | .1.3.6.1.4.1.6926.2.29.1.4.1.1 |
| osPwe3IccpMlacpAggIccpIndex ICCP RG index - osPwe3IccpRGIndex | column | Unsigned32 | .1.3.6.1.4.1.6926.2.29.1.4.1.2 |
| osPwe3IccpMlacpAggMode mlacp mode as either active-standby or active-active
first release does not support active-active | column | Enumeration | .1.3.6.1.4.1.6926.2.29.1.4.1.3 |
| osPwe3IccpMlacpAggRole Define the node default mode as either active or standby | column | Enumeration | .1.3.6.1.4.1.6926.2.29.1.4.1.4 |
| osPwe3IccpMlacpAggActiveRole Retrieve the node current mode as either active or standby | column | Enumeration | .1.3.6.1.4.1.6926.2.29.1.4.1.5 |
| osPwe3IccpMlacpAggRevertive Enables revertive switchover and configures the holdoff timer
-1 - Non Revertive
0-3600 - Revertive, time in seconds | column | Integer32 | .1.3.6.1.4.1.6926.2.29.1.4.1.6 |
| osPwe3IccpMlacpAggThreshold Define the prectage of links in the trunk to initiate a failover:
i.e. if the trunk has 4 links and the value is set to 50,
only when more than 2 links will fail it will trigger … | column | Precentage Integer32 | .1.3.6.1.4.1.6926.2.29.1.4.1.7 |
| osPwe3IccpMlacpAggLastError Last configuration error description. | column | OctetString | .1.3.6.1.4.1.6926.2.29.1.4.1.89 |
| osPwe3IccpMlacpAggSwCause The cause of the last switchower. | column | Enumeration | .1.3.6.1.4.1.6926.2.29.1.4.1.9 |
| osPwe3IccpMlacpAggRowStatus Description. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6926.2.29.1.4.1.90 |