OS-ERP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
31
.1.3.6.1.4.1.6926.2.20.2 · 1 row entry · 27 columns
This table is a private realization of dot1agCfmMdTable from do1ag MIB.
A Maintenance Domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed.
osERPCfgEntry entry .1.3.6.1.4.1.6926.2.20.2.1
Contains an entry of the table.
Indexes
osERPCfgGroupId
Column Syntax OID
osERPCfgGroupId
Ethernet Ring Protection group ID.
Integer32
Constraints:
range: 0-59
.1.3.6.1.4.1.6926.2.20.2.1.1
osERPCfgEastPort
ERP contains two ports belong to the ring, east and west
Defines the east port of the ring.
OS-COMMON-TC-MIBPortIndexOrNoner/w
Textual Convention: OS-COMMON-TC-MIBPortIndexOrNone Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.6926.2.20.2.1.2
osERPCfgWestPort
ERP instance contains two ports belong to the ring, east and west
Defines the west port of the ring.
OS-COMMON-TC-MIBPortIndexOrNoner/w
Textual Convention: OS-COMMON-TC-MIBPortIndexOrNone Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.6926.2.20.2.1.3
osERPCfgRplMode
RPL -(ring protection link is a ring link that under normal conditions,
i.e, without any failure or request, is blocked (at one or both ends)
for traffic channel, to prevent the information of loops).

rp…
Enumerationr/w
Enumerated Values:
1rplNone
2rplOwner
3rplNeighbor
.1.3.6.1.4.1.6926.2.20.2.1.4
osERPCfgRplPort
One of the RPL owner node ring port, which is under normal conditions,
i.e., without any failure or request, is blocked for traffic channel, to
prevent the formation of loops.
Enumerationr/w
Enumerated Values:
1none
2eastPort
3westPort
.1.3.6.1.4.1.6926.2.20.2.1.5
osERPCfgPrimaryVlan
Defines the Primary vlan of the ring used for R-APS.
r/w .1.3.6.1.4.1.6926.2.20.2.1.6
osERPCfgVlans
Defines vlan list to be protected.
OS-COMMON-TC-MIBTagListr/w
Textual Convention: OS-COMMON-TC-MIBTagList OctetString
Type Constraints:
range: 0..512
.1.3.6.1.4.1.6926.2.20.2.1.7
osERPCfgChannelBlocking
A mode of operation in which traffic blocking is VLAN-tag based.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.6926.2.20.2.1.8
osERPCfgWTRTimer
WTR (Wait to Restore) Timer - used by the RPL Owner to verify that the ring
has stabilized before blocking the RPL after SF recovery.
secondsInteger32r/w
Constraints:
range: 60-720
.1.3.6.1.4.1.6926.2.20.2.1.9
osERPCfgGuardTimer
Guard timer causes the nodes whose port has recovered to ignore
R-APS messages for a preset time period.
milli-secondsInteger32r/w
Constraints:
range: 10-2000
.1.3.6.1.4.1.6926.2.20.2.1.10
osERPCfgHoldOffTimer
Hold-Off Timer - disables the ERPS mechanism for a time period in order to allow
intermittent link transients to die out or to allow some other agent, operating at
a lower layer than ERPS mechanism, to stabilize the ri…
secondsInteger32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.6926.2.20.2.1.11
osERPCfgEPortVirtualChannel
Defines east-port as virtual-channel.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.6926.2.20.2.1.12
osERPCfgWPortVirtualChannel
Defines west-port as virtual-channel.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.6926.2.20.2.1.13
osERPCfgCcmMd
It is a reflection of Dot1agCfmMDLevel.
Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains,
those with the greatest physical reach, with the highest
valu…
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6926.2.20.2.1.14
osERPCfgCcmMa
The Maintenance Association index.
Case Ma is not configured default value is 0.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6926.2.20.2.1.15
osERPCfgCcmERMep
Source RMEP for EAST port.
OsEthOamMepIdOrNoner/w
Textual Convention: OsEthOamMepIdOrNone Unsigned32
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.6926.2.20.2.1.16
osERPCfgCcmWRMep
Source RMEP for WEST port.
OsEthOamMepIdOrNoner/w
Textual Convention: OsEthOamMepIdOrNone Unsigned32
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.6926.2.20.2.1.17
osERPCfgCcmEEnable
Enable ccm monitoring on east-port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.6926.2.20.2.1.18
osERPCfgCcmWEnable
Enable ccm monitoring on west-port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.6926.2.20.2.1.19
osERPCfgVersion
Setting ERPs. (G.8032) version.
version 1 including amendment 1 based on G.8032 06/2008 + amendment 1 04/2009.
version 2 based on G.8032 03/2010.
Enumerationr/w
Enumerated Values:
1versionOnePlusAmendOne
2versionTwo
.1.3.6.1.4.1.6926.2.20.2.1.20
osERPCfgCommand
Execute command:
ms - Manual-Switch, fs - Force-switch, clear - clear state fs,ms or clear non-revertive mode.
Enumerationr/w
Enumerated Values:
1none
2msEastPort
3msWestPort
4fsEastPort
5fsWestPort
6clear
.1.3.6.1.4.1.6926.2.20.2.1.21
osERPCfgRevertive
Enable revertive mode
true- means revertive mode
false - means non-revertive mode.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.6926.2.20.2.1.22
osERPCfgDomain
The ring MEL (Maintenance Entity Group Level) is a maintenance entity group (MEG) level
providing a communication channel for ring automatic protection switching (R-APS) information.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6926.2.20.2.1.24
osERPCfgSendSnmpTrap
Turn on/off the option of sending traps.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.6926.2.20.2.1.25
osERPCfgRingId
A ring ID in the range 1..239 can be configured for each
ERP instance. This ring ID is used in the R-APS message transmission
to determine the last octet of the MAC destination address.
It is also used in the validity…
Integer32r/w
Constraints:
range: 1-239
.1.3.6.1.4.1.6926.2.20.2.1.26
osERPCfgLastError
Display last configuration error.
OctetString
Constraints:
range: 2-160
.1.3.6.1.4.1.6926.2.20.2.1.100
osERPCfgAdminStatus
Allows creating new ERP group, deleting ERP group, enable/disable ERP group.
ErpEntryValidatorr/w
Textual Convention: ErpEntryValidator Enumeration
Type Values:
1disable
2enable
3delete
4create
.1.3.6.1.4.1.6926.2.20.2.1.101
.1.3.6.1.4.1.6926.2.20.3 · 1 row entry · 4 columns
Ethernet Ring Protection operation description table.
osERPOperEntry entry .1.3.6.1.4.1.6926.2.20.3.1
Contains an entry of the table.
Indexes
No indexes recorded
Column Syntax OID
osERPOperEastPortState
Indicates east-port state.
ErpPortState
Textual Convention: ErpPortState Enumeration
Type Values:
1unblocked
2blocked
3sf
4ms
5fs
.1.3.6.1.4.1.6926.2.20.3.1.1
osERPOperWestPortState
Indicates west-port state.
ErpPortState
Textual Convention: ErpPortState Enumeration
Type Values:
1unblocked
2blocked
3sf
4ms
5fs
.1.3.6.1.4.1.6926.2.20.3.1.2
osERPOperLastEvent
Indicates the last event that was received by rings ports.
Enumeration
Enumerated Values:
1none
2clear
3fs
4rapsFs
5localSf
6localClearSf
7rapsSf
8rapsMs
9ms
10wtrExpires
11wtrRunning
12wtbExpires
13wtbRunning
14rapsNrRb
15rapsNr
.1.3.6.1.4.1.6926.2.20.3.1.3
osERPOperState
Indicates the state of the node (and the ring).
Enumeration
Enumerated Values:
1init
2idle
3protection
4forceSwitch
5manualSwitch
6pending
.1.3.6.1.4.1.6926.2.20.3.1.4