osERPCfgRplMode
OS-ERP-MIB ·
.1.3.6.1.4.1.6926.2.20.2.1.4
Object
column
r/w
Enumeration
RPL -(ring protection link is a ring link that under normal conditions,
i.e, without any failure or request, is blocked (at one or both ends)
for traffic channel, to prevent the information of loops).
rplNone (1) - not RPL owner / neighbor
rplOwner (2) - RPL owner is an ethernet ring node adjacent to the RPL that is responsible
for blocking its end of the RPL under normal conditions
(i.e the ring is established and no requests are present in the ring)
rplNeighbor (3) - RPL neighbor is an ethernet ring node adjacent to the RPL that is responsible
for blocking its end of the RPL under normal conditions
in addition to the block by the RPL owner node. However, it is not responsible for
activating the reversion behavior.
Context
- MIB
- OS-ERP-MIB
- OID
.1.3.6.1.4.1.6926.2.20.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- osERPCfgEntry
- Table
- osERPCfgTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | rplNone |
2 | rplOwner |
3 | rplNeighbor |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osERPCfgGroupId Ethernet Ring Protection group ID. | column | Integer32 | .1.3.6.1.4.1.6926.2.20.2.1.1 |
| osERPCfgGuardTimer Guard timer causes the nodes whose port has recovered to ignore
R-APS messages for a preset time period. | column | milli-seconds Integer32 | .1.3.6.1.4.1.6926.2.20.2.1.10 |
| osERPCfgLastError Display last configuration error. | column | OctetString | .1.3.6.1.4.1.6926.2.20.2.1.100 |
| osERPCfgAdminStatus Allows creating new ERP group, deleting ERP group, enable/disable ERP group. | column | ErpEntryValidator | .1.3.6.1.4.1.6926.2.20.2.1.101 |
| osERPCfgHoldOffTimer Hold-Off Timer - disables the ERPS mechanism for a time period in order to allow
intermittent link transients to die out or to allow some other agent, operating at
a lower layer … | column | seconds Integer32 | .1.3.6.1.4.1.6926.2.20.2.1.11 |
| osERPCfgEPortVirtualChannel Defines east-port as virtual-channel. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.20.2.1.12 |
| osERPCfgWPortVirtualChannel Defines west-port as virtual-channel. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.20.2.1.13 |
| osERPCfgCcmMd It is a reflection of Dot1agCfmMDLevel.
Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains,
those with the greate… | column | Integer32 | .1.3.6.1.4.1.6926.2.20.2.1.14 |
| osERPCfgCcmMa The Maintenance Association index.
Case Ma is not configured default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.6926.2.20.2.1.15 |
| osERPCfgCcmERMep Source RMEP for EAST port. | column | OsEthOamMepIdOrNone | .1.3.6.1.4.1.6926.2.20.2.1.16 |
| osERPCfgCcmWRMep Source RMEP for WEST port. | column | OsEthOamMepIdOrNone | .1.3.6.1.4.1.6926.2.20.2.1.17 |
| osERPCfgCcmEEnable Enable ccm monitoring on east-port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.20.2.1.18 |
| osERPCfgCcmWEnable Enable ccm monitoring on west-port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.20.2.1.19 |
| osERPCfgEastPort ERP contains two ports belong to the ring, east and west
Defines the east port of the ring. | column | OS-COMMON-TC-MIBPortIndexOrNone | .1.3.6.1.4.1.6926.2.20.2.1.2 |
| osERPCfgVersion Setting ERPs. (G.8032) version.
version 1 including amendment 1 based on G.8032 06/2008 + amendment 1 04/2009.
version 2 based on G.8032 03/2010. | column | Enumeration | .1.3.6.1.4.1.6926.2.20.2.1.20 |
| osERPCfgCommand Execute command:
ms - Manual-Switch, fs - Force-switch, clear - clear state fs,ms or clear non-revertive mode. | column | Enumeration | .1.3.6.1.4.1.6926.2.20.2.1.21 |
| osERPCfgRevertive Enable revertive mode
true- means revertive mode
false - means non-revertive mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.20.2.1.22 |
| osERPCfgDomain The ring MEL (Maintenance Entity Group Level) is a maintenance entity group (MEG) level
providing a communication channel for ring automatic protection switching (R-APS) informati… | column | Integer32 | .1.3.6.1.4.1.6926.2.20.2.1.24 |
| osERPCfgSendSnmpTrap Turn on/off the option of sending traps. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.20.2.1.25 |
| osERPCfgRingId A ring ID in the range 1..239 can be configured for each
ERP instance. This ring ID is used in the R-APS message transmission
to determine the last octet of the MAC destination ad… | column | Integer32 | .1.3.6.1.4.1.6926.2.20.2.1.26 |
| osERPCfgWestPort ERP instance contains two ports belong to the ring, east and west
Defines the west port of the ring. | column | OS-COMMON-TC-MIBPortIndexOrNone | .1.3.6.1.4.1.6926.2.20.2.1.3 |
| osERPCfgRplPort One of the RPL owner node ring port, which is under normal conditions,
i.e., without any failure or request, is blocked for traffic channel, to
prevent the formation of loops. | column | Enumeration | .1.3.6.1.4.1.6926.2.20.2.1.5 |
| osERPCfgPrimaryVlan Defines the Primary vlan of the ring used for R-APS. | column | - | .1.3.6.1.4.1.6926.2.20.2.1.6 |
| osERPCfgVlans Defines vlan list to be protected. | column | OS-COMMON-TC-MIBTagList | .1.3.6.1.4.1.6926.2.20.2.1.7 |
| osERPCfgChannelBlocking A mode of operation in which traffic blocking is VLAN-tag based. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.20.2.1.8 |
| osERPCfgWTRTimer WTR (Wait to Restore) Timer - used by the RPL Owner to verify that the ring
has stabilized before blocking the RPL after SF recovery. | column | seconds Integer32 | .1.3.6.1.4.1.6926.2.20.2.1.9 |