OPTIX-PW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

185

optixStaticUcEthPWTable

table

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2 · 1 row entry · 27 columns

Open in standard view

This table implements the configurations of static unicast ETH PWs, including the PW type, label, tunnels carried on the PW, CW, VCCV, and applied VLAN.

optixStaticUcEthPWEntry entry .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1

This entry indicates the parameter table of the static unicast ETH PWs.

Indexes

optixEthPWIndex

Column Syntax OID

optixEthPWIndex

This object indicates the PW index, ranging from 1 to 0x00ffffff,0 means auto.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.1

optixEthPWtype

This object indcates the PW type. 0x0004: eth-tag 0x0005: eth-raw

Enumerationr/w

Enumerated Values:

4	ethtag
5	ethraw

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.2

optixEthPWId

This object indicates the PW ID.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.3

optixEthPWDirection

This object indicates the PW direction. 1: bi 2: uni

Enumerationr/w

Enumerated Values:

1	bi
2	uni

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.4

optixEthPWPosition

This object indicates the node location. 0: null 1: ingress 2: egress

Enumerationr/w

Enumerated Values:

0	null
1	ingress
2	egress

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.5

optixEthPWInLabel

This object indicates the ingress label.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.6

optixEthPWOutLabel

This object indicates the egress label.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.7

optixEthPWPeerIp

This object indicates the peer IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.8

optixEthPWTunnelIndex

This object indicates the index to the tunnel carried through the PW.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.9

optixEthPWVccvctrlChnlType

This object indicates the control channel type. 0: none 1: cw 2: alertlabel 3: cwaltlb 4: ttl

Enumerationr/w

Enumerated Values:

0	none
1	cw
2	alertlabel
4	cwaltlb

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.10

optixEthPWVccvCheckType

This object indicates the verification mode. 0: none 1: ping 2: bfd 3 :pingbfd

Enumerationr/w

Enumerated Values:

0	none
1	ping
2	bfd
3	pingbfd

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.11

optixEthPWCtrlWord

This object indicates the usage policy of the control word. 1: not-use 2: frt-use 3: mst-use

Enumerationr/w

Enumerated Values:

1	notuse
2	fstuse
3	mstuse

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.12

optixEthPWExp

This object indicates the EXP value. (Only upstream EXPs are supported.) Valid values:0-7. 0xff: The EXP value is invalid.

Unsigned32r/w

Constraints:
range: 255-255
range: 0-7

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.13

optixEthPWLspMode

This object indicates the LSP mode.(Only the downstreamLSP is supported.) 1: uniform 2: pipe 255: none (The LSP mode is invalid upstream.)

Enumerationr/w

Enumerated Values:

1	uniform
2	pipe
255	none

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.14

optixEthPWEnable

This object indicates the enable status of the PW. 0: disable 1: enable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.15

optixEthPWIngressIdBoundEgrTnl

This object indicates the source node ID of the bound egress tunnel.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.16

optixEthPWEgressIdBoundEgrTnl

This object indicates the sink node ID of the bound egress tunnel.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.17

optixEthPWTunnelIdBoundEgrTnl

This object idnicates the bound egress tunnel ID.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.18

optixEthPWEncapsulateVlanId

When ETH services are carried through Ethernet tagged PWs, service VLAN must be added before the service payloads. This object is used to specify the VLAN ID.Valid values: 1-4095. 0xffff: The VLAN ID is not specified.

Unsigned32r/w

Constraints:
range: 65535-65535
range: 1-4094

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.19

optixEthPWCheckRet

This object indicates the PW check result.

Enumeration

Enumerated Values:

0	normal
1	abnormal

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.20

optixEthPWSrvType

This object indicates the type of the service carried by the PW.

Enumeration

Enumerated Values:

1	ces
2	atmPwe3
3	eLine
4	eLan
5	eAggr
6	eTree
7	mirror
8	msPw
9	ptp1588
10	top

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.21

optixEthPWSrvIndex

This object indicates the index to the service carried by the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.22

optixEthPWSrvID

This object indicates the ID of the service carried by the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.23

optixEthPWLocalState

This object indicates the local state of the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.24

optixEthPWRemoteState

This object indicates the remote state of the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.25

optixEthPWState

This object indicates the PW state.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.26

optixEthPWRowStatus

This object indicates the row status. 1: active 4: createAndGo 6: destroy

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.255

optixStaticUcAtmPWTable

table

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3 · 1 row entry · 28 columns

Open in standard view

This table implements the configurations of static unicastATM PWs, including PW type, label, tunnels carried on the PW, CW, VCCV, and ATM concatenation.

optixStaticUcAtmPWEntry entry .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1

This entry indicates the parameter table of the static unicastATM PWs.

Indexes

optixAtmPWIndex

Column Syntax OID

optixAtmPWIndex

This object indicates the PW index, ranging from 1 to 0x00ffffff.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.1

optixAtmPWtype

This object indcates the PW type. 0x0003: atm-trans 0x0009: atm-nto1-vcc 0x000A: atm-nto1-vpc 0x000C: atm-1to1-vcc 0x000D: atm-1to1-vpc

Enumerationr/w

Enumerated Values:

3	atmtrans
9	atmnto1vcc
10	atmnto1vpc
12	atm1to1vcc
13	atm1to1vpc

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.2

optixAtmPWId

This object indicates the PW ID.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.3

optixAtmPWDirection

This object indicates the PW direction. 1: bi 2: uni

Enumerationr/w

Enumerated Values:

1	bi
2	uni

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.4

optixAtmPWPosition

This object indicates the node location. 0: null 1: ingress 2: egress

Enumerationr/w

Enumerated Values:

0	null
1	ingress
2	egress

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.5

optixAtmPWInLabel

This object indicates the ingress label.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.6

optixAtmPWOutLabel

This object indicates the egress label.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.7

optixAtmPWPeerIp

This object indicates the peer IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.8

optixAtmPWTunnelIndex

This object indicates the index to the tunnel carried through the PW.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.9

optixAtmPWVccvctrlChnlType

This object indicates the control channel type. 0: none 1: cw 2: alertlabel 4: ttl

Enumerationr/w

Enumerated Values:

0	none
1	cw
2	alertlabel
3	ttl

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.10

optixAtmPWVccvCheckType

This object indicates the verification mode. 0: none 1: ping 2: bfd

Enumerationr/w

Enumerated Values:

0	none
1	ping
2	bfd

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.11

optixAtmPWCtrlWord

This object indicates the usage policy of the control word. 1: not-use 2: frt-use 3: mst-use

Enumerationr/w

Enumerated Values:

1	notuse
2	fstuse
3	mstuse

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.12

optixAtmPWExp

This object indicates the EXP value. (Only upstream EXPs are supported.) Valid values:0-7. 0xff: none

Unsigned32r/w

Constraints:
range: 255-255
range: 0-7

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.13

optixAtmPWLspMode

This object indicates the LSP mode.(Only the downstream LSPis supported.) 1: uniform 2: pipe 255: none (The LSP mode is invalid upstream.)

Enumerationr/w

Enumerated Values:

1	uniform
2	pipe
255	none

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.14

optixAtmPWEnable

This object indicates the enable status of the PW. 0: disable 1: enable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.15

optixAtmPWIngressIdBoundEgrTnl

This object indicates the source node ID of the bound egress tunnel.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.16

optixAtmPWEgressIdBoundEgrTnl

This object indicates the sink node ID of the bound egress tunnel.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.17

optixAtmPWTunnelIdBoundEgrTnl

Thisobject indicates the bound egress tunnel ID.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.18

optixAtmPWMaxCellNum

This object indicates the maximum number of concatenate ATM cells. Valid values range from 1 to 31. 1: The ATM concatenation is disabled.

Unsigned32r/w

Constraints:
range: 1-31

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.19

optixAtmPWMaxLoadTime

This object indicates the longest waiting time for ATM concatenation. Valid values:100-50000. 0: The ATM concatenation is disabled. Unit:us; step: 100.

Unsigned32r/w

Constraints:
range: 10-50000
range: 0-0

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.20

optixAtmPWCheckRet

This object indicates the PW check result.

Enumeration

Enumerated Values:

0	normal
1	abnormal

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.21

optixAtmPWSrvType

This object indicates the type of the service carried by the PW.

Enumeration

Enumerated Values:

1	ces
2	atmPwe3
3	eLine
4	eLan
5	eAggr
6	eTree
7	mirror
8	msPw
9	ptp1588
10	top

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.22

optixAtmPWSrvIndex

This object indicates the index to the service carried by the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.23

optixAtmPWSrvID

This object indicates the ID of the service carried by the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.24

optixAtmPWLocalState

This object indicates the local state of the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.25

optixAtmPWRemoteState

This object indicates the remote state of the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.26

optixAtmPWState

This object indicates the PW state.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.27

optixAtmPWRowStatus

This object indicates the row status. 1: active 4: createAndGo 6: destroy

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.255

optixStaticUcCesPWTable

table

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4 · 1 row entry · 35 columns

Open in standard view

This table implements the PW configurations of the static unicast CES service. These configurations include thePW type, label, tunnels carried by the PW, CW, VCCV, SDH emulation level, enable status of the RTP header, packet loading time, and jitter buffer time.

optixStaticUcCesPWEntry entry .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1

This entry indicates the parameter table of the static unicast CES PWs.

Indexes

optixCesPWIndex

Column Syntax OID

optixCesPWIndex

This object indicates the PW index, ranging from 1 to 0x00ffffff.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.1

optixPCesPWtype

This object indcates the PW type. 0x0011: satop-e1 0x0015: cesopsn 0x0010: cep

Enumerationr/w

Enumerated Values:

16	cep
17	satop
21	cesopsn

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.2

optixCesPWId

This object indicates the PW ID.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.3

optixCesPWDirection

This object indicates the PW direction. 1: bi 2: uni}

Enumerationr/w

Enumerated Values:

1	bi
2	uni

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.4

optixCesPWPosition

This object indicates the node location. 0: null 1: ingress 2: egress

Enumerationr/w

Enumerated Values:

0	null
1	ingress
2	egress

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.5

optixCesPWInLabel

This object indicates the ingress label.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.6

optixCesPWOutLabel

This object indicates the egress label.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.7

optixCesPWPeerIp

This object indicates the peer IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.8

optixCesPWTunnelIndex

This object indicates the index to the tunnel carried through the PW.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.9

optixCesPWVccvctrlChnlType

This object indicates the control channel type. 0: none 1: cw 2: alertlabel 3: cwaltlb 4: ttl

Enumerationr/w

Enumerated Values:

0	none
1	cw
2	alertlabel
3	ttl
4	cwaltlb

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.10

optixCesPWVccvCheckType

This object indicates the verification mode. 0: none 1: ping 2: bfd 3 :pingbfd

Enumerationr/w

Enumerated Values:

0	none
1	ping
2	bfd
3	pingbfd

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.11

optixCesPWCtrlWord

This object indicates the usage policy of the control word. 1: not-use 2: frt-use 3: mst-use

Enumerationr/w

Enumerated Values:

1	notuse
2	fstuse
3	mstuse

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.12

optixCesPWExp

This object indicates the EXP value. (Only upstream EXPs are supported.) Valid values:0-7. 0xff: none

Unsigned32r/w

Constraints:
range: 0-7
range: 255-255

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.13

optixCesPWLspMode

This object indicates the LSP mode.(Only the downstream LSP is supported.) 1: uniform 2: pipe 255: none (the LSP mode is invalid upstream.)

Enumerationr/w

Enumerated Values:

1	uniform
2	pipe
255	none

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.14

optixCesPWEnable

This object indicates the enable status of the PW. 0: disable 1: enable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.15

optixCesPWIngressIdBoundEgrTnl

This object indicates the source node ID of the bound egress tunnel.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.16

optixCesPWEgressIdBoundEgrTnl

This object indicates the sink node ID of the bound egress tunnel.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.17

optixCesPWTunnelIdBoundEgrTnl

This object indicates the bound egress tunnel ID.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.18

optixCesPWRtpHead

This object indicates the enable status of the RTP header encapsulation. 0: disable 1: enablehwrtp 2: enablestdrtp

Enumerationr/w

Enumerated Values:

0	disable
1	ablehwrtp
2	enablestdrtp

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.19

optixCesPWLoadTime

This object indicates the packet loading time. Valid values: 125-5000 us; step: 125

Unsigned32r/w

Constraints:
range: 125-5000

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.20

optixCesPWJitterTime

This object indicates the jitter buffer time. Valid values: 125-64000 us; step: 125

Unsigned32r/w

Constraints:
range: 125-64000

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.21

optixCesPWEmulLevel

This object indicates the CES emulation level. 1: vc12 2: vc11 3: vc4 4: vc4 (3 x vc3)

Enumerationr/w

Enumerated Values:

1	vc12
2	vc11
3	vc4
4	triplicatevc3

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.22

optixCesPWPathNum

This object indicates the number of valid timeslots/channels. E1: 1-32; T1: 1-24; VC4: 1; VC4 (3 x VC3):3

Unsigned32r/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.23

optixCesPWSNMode

This object indicates the serial-number mode. 0: stdmode; valid values range from 0 to 65535 and restart from 0. 1: hwmode; valid values range form 0 to 65535 and restart from 1.

Enumerationr/w

Enumerated Values:

0	stdmode
1	hwmode

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.24

optixCesPWLMREnable

This object indicates the processing status of the L, M, and R bits. 0: disable 1: enable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.25

optixCesPWInRbit

This object indicates the threshold for entering the R bit insertion status. Valid values: 1-65535.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.26

optixCesPWOutRbit

Thisobject indicates the threshold forexiting the R bit insertion status. Valid values: 1-65535.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.27

optixCesPWCheckRet

This object indicates the PW check result.

Enumeration

Enumerated Values:

0	normal
1	abnormal

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.28

optixCesPWSrvType

This object indicates the type of the service carried by the PW.

Enumeration

Enumerated Values:

1	ces
2	atmPwe3
3	eLine
4	eLan
5	eAggr
6	eTree
7	mirror
8	msPw
9	ptp1588
10	top

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.29

optixCesPWSrvIndex

This object indicates the index to the service carried by the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.30

optixCesPWSrvID

This object indicates the ID of the service carried by the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.31

optixCesPWLocalState

This object indicates the local state of the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.32

optixCesPWRemoteState

This object indicates the remote state of the PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.33

optixCesPWState

This object indicates the PW state.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.34

optixCesPWRowStatus

This object indicates the row status. 1: active 4: createAndGo 6: destroy

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.255

optixPWCrossTable

table

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5 · 1 row entry · 18 columns

Open in standard view

This table is used to query the actual PW cross-connect and forwarding paths. One PW has two cross-connections, forward and backward.

optixPWCrossEntry entry .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1

This entry is used to query the parameter table for actual PW cross-connections.

Indexes

optixPWIndex optixPWCrossdirection

Column Syntax OID

optixPWIndex

This object indicates the PW index, ranging from 1 to 0x00ffffff.

Unsigned32

Constraints:
range: 1-16777215

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.1

optixPWCrossdirection

This object indicates the cross-connect direction. 1: forward 2: backward

Enumeration

Enumerated Values:

1	posit
2	minus

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.2

optixPWCrossType

This object indcates the PW type. 0x0003: atm-trans 0x0004: eth-tag 0x0005: eth-raw 0x0009: atm-nto1-vcc 0x000A: atm-nto1-vpc 0x000C: atm-1to1-vcc 0x000D: atm-1to1-vpc 0x0011: satop-e1 0x0015: cesopsn 0x0010: cep 0x1001…

Enumeration

Enumerated Values:

3	atmtrans
4	ethtag
5	ethraw
9	atmnto1vcc
10	atmnto1vpc
12	atm1to1vcc
13	atm1to1vpc
16	cep
17	satop
21	cesopsn
4097	ip

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.4

optixPWCrossPWId

This object indicates the PW ID.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.5

optixPWCrossPWGroupId

This object indicates the group ID.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.6

optixPWCrossPeerIp

This object indicates the peer IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.7

optixPWCrossSingalType

This object indicates the signaling type. 1: static; 2: dynamic LDP

Enumeration

Enumerated Values:

1	static
2	ldp

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.8

optixPWCrossPosition

This object indicates the node location. 0: null, 1: ingress, 2: egress

Enumeration

Enumerated Values:

0	null
1	ingress
2	egress

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.9

optixPWCrossCtrlWord

This object indicates the control word type. 1: notuse, 2: fstuse, 3: mstuse

Enumeration

Enumerated Values:

1	notuse
2	fstuse
3	mstuse

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.10

optixPWCrossVccvctrlChnlType

This object indicates the VCCV control channel type. 0: none, 1: cw, 2: alertlabel, 3: ttl

Enumeration

Enumerated Values:

0	none
1	cw
2	alertlabel
3	ttl

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.11

optixPWCrossVccvCheckType

This object indicates the VCCV verification mode. 0: none, 1: ping, 2: bfd

Enumeration

Enumerated Values:

0	none
1	ping
2	bfd

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.12

optixPWCrossInLabel

This object indicates the ingress label. The forward cross-connection value is 0xffffffff.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.13

optixPWCrossOutLabel

This object indicates the ingress label. The backward cross-connection value is 0xffffffff.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.14

optixPWCrossTunnelIngressId

This object indicates the ingress tunnel ID to which the PW belongs.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.15

optixPWCrossTunnelEgressId

This object indicates the egress tunnel ID to which the PW belongs.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.16

optixPWCrossTunnelId

This object indicates the tunnel ID to which the PW belongs.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.17

optixPWCrossTunnelType

This object indicates the type of the tunnel to which the PW belongs. 0: mpls 1: pbt 2: ip 3: gre

Enumeration

Enumerated Values:

0	mpls
1	pbt
2	ip
3	gre

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.18

optixPWCrossActiveStaus

This object indicates the activation status of the PW cross-connection. 0: deactive 1: active

Enumeration

Enumerated Values:

0	noactive
1	active

.1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.19

optixDynLdpPWTable

table

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6 · 1 row entry · 16 columns

Open in standard view

This table implements the configurations of a dynamic PW.

optixDynLdpPWEntry entry .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1

This node describes an entity of the dynamic PW parameter table.

Indexes

optixDynLdpPWIndex

Column Syntax OID

optixDynLdpPWIndex

This object describes the index of a dynamic PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.1

optixDynLdpPWtype

This object describes the type of a dynamic PW.

Enumerationr/w

Enumerated Values:

3	atmtrans
4	ethtag
5	ethraw
9	atmnto1vcc
10	atmnto1vpc
12	atm1to1vcc
13	atm1to1vpc
17	satope1
21	cesopsnbas

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.2

optixDynLdpPWId

This object describes the ID of a dynamic PW.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.3

optixDynLdpPWDirection

This object describes the direction of a dynamic PW.

Enumerationr/w

Enumerated Values:

1	bi
2	uni

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.4

optixDynLdpPWPosition

This object describes the node location of a dynamic PW. 0: null 1: ingress 2: egress

Enumerationr/w

Enumerated Values:

0	null
1	ingress
2	egress

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.5

optixDynLdpPWInLabel

This object describes the ingress label of a dynamic PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.6

optixDynLdpPWOutLabel

This object describes the egress label of a dynamic PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.7

optixDynLdpPWPeerIp

This object describes the peer IP address of a dynamic PW.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.8

optixDynLdpPWTunnelIndex

This object describes the index to the tunnel carried over the PW.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.9

optixDynLdpPWCWEn

This object describes whether to enable the control word of the VCCV.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.10

optixDynLdpPWCCType

This object describes the control channel type of the VCCV.

Enumeration

Enumerated Values:

0	none
1	cw
2	altlb
3	ttl
4	cwaltlb

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.11

optixDynLdpPWCVType

This object describes the check mode of the VCCV.

Enumeration

Enumerated Values:

0	none
1	ping
2	bfd
3	pingbfd

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.12

optixDynLdpPWATMCellNum

This object describes the actual number of cascaded ATM cells of a dynamic PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.13

optixDynLdpPWCESRTP

This object describes whether the RTP header encapsulation is enabled on a dynamic PW.

Enumeration

Enumerated Values:

0	disable
1	enablehwrtp
2	enablestdrtp

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.14

optixDynLdpPWErrCode

This object describes the error code of a dynamic pw. 57385:MTU negotiation failure between local end and remote end, 57386:Control word mode negotiation failure between local end and remote end, 57387:RTP enable/disabl…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.15

optixDynLdpPWRowStatus

This object describes the row status. 1: active 4: createAndGo 6: destroy.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.255

optixDynPWBFDTable

table

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7 · 1 row entry · 15 columns

Open in standard view

This table implements the configurations of a BFD session for dynamic PWs.

optixDynPWBFDEntry entry .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1

This entry describes an entity of the BFD session parameter table.

Indexes

optixDynLdpPWIndex

Column Syntax OID

optixDynPWBFDSessionName

This object describes the name of a BFD session.

OctetStringr/w

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.1

optixDynPWBFDLocalMark

This object describes the local label of a BFD session.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.2

optixDynPWBFDRemoteMark

This object describes the remote label of a BFD session.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.3

optixDynPWBFDPeerIP

This object describes the sink IP address of a BFD session.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.4

optixDynPWBFDAutoCalc

This object describes whether the auto calculation of the number of PW hops is enabled.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.5

optixDynPWBFDTTL

This object describes the number of PW hops detected in a BFD session.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.6

optixDynPWBFDSessionType

This object describes the type of a BFD session.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.7

optixDynPWBFDMinRxInterval

This object describes the minimum interval expected by the NE to receive BFD packets.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.8

optixDynPWBFDMinTxInterval

This object describes the minimum interval expected by the NE to transmit BFD packets.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.9

optixDynPWBFDMultiplier

This object describes the local detection multiplier for the BFD session.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.10

optixDynPWBFDTosExp

This object describes the priority of a BFD packet.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.11

optixDynPWBFDWtr

This object describes the wait-to-recovery time for the BFD session.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.12

optixDynPWBFDShutdown

This object describes the BFD session testing status.

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.13

optixDynPWBFDState

This object describes the status of a BFD session.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.14

optixDynPWBFDRowStatus

This object describes the row status. 1: active 4: createAndGo 6: destroy

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.255

optixDynPWREDDYTable

table

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8 · 1 row entry · 11 columns

Open in standard view

This table implements the configurations of a redundancy group for dynamic PWs.

optixDynPWREDDYEntry entry .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1

This entry describes the parameter table of a redundancy group.

Indexes

optixDynPWREDDYIndex

Column Syntax OID

optixDynPWREDDYIndex

This object describes the index of a PW redundancy group.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.1

optixDynPWREDDYProtectType

This object describes the protection type of a PW redundancy group.

Enumerationr/w

Enumerated Values:

1	oneplusone
2	onetoone
3	bfdfrr1to1

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.2

optixDynPWREDDYMem1PW

This object describes the PW1, a member of the PW redundancy group.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.3

optixDynPWREDDYPW1State

This node describes the forwarding status of PW1, a member of the PW redundancy group.

Enumeration

Enumerated Values:

0	forwarding
1	unforwarding

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.4

optixDynPWREDDYMem2PW

This object describes PW2, another member of the PW redundancy group.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.5

optixDynPWREDDYPW2State

This node describes the forwarding status of PW2, another member of the PW redundancy protection group.

Enumeration

Enumerated Values:

0	forwarding
1	unforwarding

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.6

optixDynPWREDDYMode

This object describes the mode of a PW redundancy group.

Enumerationr/w

Enumerated Values:

0	master
1	independent

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.7

optixDynPWREDDYDualRecv

This object describes the dual receiving mode of a PW redundancy group.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.8

optixDynPWREDDYReroute

This object describes the PW switchback policy mode.

Enumerationr/w

Enumerated Values:

1	delay
2	never
3	immediately

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.9

optixDynPWREDDYDelayTime

This object describes switchback delay time of a PW redundancy group.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.10

optixDynPWREDDYRowStatus

This object describes the row status. 1: active 4: createAndGo 6: destroy

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.255

optixMsPWTable

table

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1 · 1 row entry · 14 columns

Open in standard view

This table implements the configurations of MS-PWs, including the last/next segment PW index, name, MTU, types of services carried on the PW.

optixMsPWEntry entry .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1

This entry indicates the MS PW parameter table.

Indexes

optixMsPWIndex

Column Syntax OID

optixMsPWIndex

This object indicates the MS-PW index.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.1

optixMsPWid

This object indicates the MS-PW ID.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.2

optixMsPWForePwIndex

This object indicates the last segment PW index.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.3

optixMsPWBackPwIndex

This object indicates thenext segment PW index.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.4

optixMsPWMtu

This object indicates the MTU. If the last and next segment PWs are of ETH service type, the value ranges from 46-9000. Default value: 1500. If the last and next segment PWs are of ATM or CES service type. The value is …

Unsigned32r/w

Constraints:
range: 46-9000

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.5

optixMsPWName

This object indicates the MS-PW name, which is a character string, supporting a maximum of 64 bytes. No default value is configured. The name could be null, space, and chinese characters.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.6

optixMsPWServiceType

This object indicates the service type. 1: ces 2: atm 3: eth 4: ptp 5: top 6: ip 7: soh-cep 8: nosoh-cep

Enumerationr/w

Enumerated Values:

1	ces
2	atm
3	eth
4	ptp
5	top
6	ip
7	sohcep
8	nosohcep

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.7

optixMsPWForePwLocalState

This object indicates the local state of fore pw.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.8

optixMsPWForePwRemoteState

This object indicates the remote state of fore pw.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.9

optixMsPWForePwState

This object indicates the state of fore PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.10

optixMsPWBackPwLocalState

This object indicates the local state of back PW

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.11

optixMsPWBackPwRemoteState

This object indicates the remote state of back pw.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.12

optixMsPWBackPwState

This object indicates the state of back pw.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.13

optixMsPWRowStatus

This object indicates the row status. 1: active 4: createAndGo 6: destroy

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.255

optixMsPWCrossTable

table

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2 · 1 row entry · 21 columns

Open in standard view

This table is used to query the actual MS-PW cross-connect and forwarding paths and the cross-connection information of the last and next segment PWs are returned.

optixMsPWCrossEntry entry .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1

This entry is used to query the parameter table for actual MS-PW cross-connections.

Indexes

optixMsPWCrossIndex

Column Syntax OID

optixMsPWCrossIndex

This object indicates the MS-PW index, ranging from 1 to 0x00ffffff.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.1

optixMsPWCrossForePWXCId

This object indicates the ID of the cross-connection between the last segment and the next segment PWs.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.2

optixMsPWCrossForePWType

This object indicates the last segment PW type. 4: ethtag, 5: ethraw, 3: atmtrans, 9: atmnto1vcc, 10: atmnto1vpc, 12: atm1to1vcc, 13: atm1to1vpc, 17: satop, 21: cesopsn, 16: cep, 4097: ip

Enumeration

Enumerated Values:

3	atmtrans
4	ethtag
5	ethraw
9	atmnto1vcc
10	atmnto1vpc
12	atm1to1vcc
13	atm1to1vpc
16	cep
17	satop
21	cesopsn
4097	ip

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.3

optixMsPWCrossForePWId

This object indicates the last segment PW ID.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.4

optixMsPWCrossForePWInlabel

This object indicates the ingress label of the last segment PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.5

optixMsPWCrossBackPWOutlabel

This object indicates the egress label of the last segment PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.6

optixMsPWCrossBackPWTnlIngressId

This object indicates the ingress tunnel ID of the last segment PW.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.7

optixMsPWCrossBackPWTnlEgressId

This object indicates the egress tunnel ID of the last segment PW.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.8

optixMsPWCrossBackPWTnlId

This object indicates the tunnel ID of the last segment PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.9

optixMsPWCrossBackPWTunnelType

This object indicates the tunnel type of the last segment PW. 0: mpls, 1: pbt, 2: ip, 3: gre

Enumeration

Enumerated Values:

0	mpls
1	pbt
2	ip
3	gre

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.10

optixMsPWCrossForePWActiveStaus

This object indicates the activation status of the cross-connection between the last segment and the next segment PWs. 0: noactive, 1: active

Enumeration

Enumerated Values:

0	noactive
1	active

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.11

optixMsPWCrossBackPWXCId

This object indicates the ID of the cross-connection between the next segment and thelast segment PWs.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.12

optixMsPWCrossBackPWType

This object indicates thenext segment PW type. 4: ethtag, 5: ethraw, 3: atmtrans, 9: atmnto1vcc, 10: atmnto1vpc, 12: atm1to1vcc, 13: atm1to1vpc, 17: satop, 21: cesopsn, 16: cep, 4097: ip

Enumeration

Enumerated Values:

3	atmtrans
4	ethtag
5	ethraw
9	atmnto1vcc
10	atmnto1vpc
12	atm1to1vcc
13	atm1to1vpc
16	cep
17	satop
21	cesopsn
4097	ip

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.13

optixMsPWCrossBackPWId

This object indicates the next segment PW ID.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.14

optixMsPWCrossBackPWInlabel

This object indicates the ingress label of thenext segment PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.15

optixMsPWCrossForePWOutlabel

This object indicates the egress label of the last segment PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.16

optixMsPWCrossForePWTnlIngressId

This object indicates the ingress tunnel ID of the last segment PW.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.17

optixMsPWCrossForePWTnlEgressId

This object indicates the egress tunnel ID of the last segment PW.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.18

optixMsPWCrossForePWTnlId

This object indicates the tunnel ID of the last segment PW.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.19

optixMsPWCrossForePWTunnelType

This object indicates the tunnel type of the last segment PW. 0: mpls, 1: pbt, 2: ip, 3: gre

Enumeration

Enumerated Values:

0	mpls
1	pbt
2	ip
3	gre

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.20

optixMsPWCrossBackPWActiveStaus

This object indicates the activation status of the cross-connection between thenext segment and the last segment PWs. 0: noactive, 1: active

Enumeration

Enumerated Values:

0	noactive
1	active

.1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.21