optixDynLdpPWErrCode

OPTIX-PW-MIB · .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.15
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
This object describes the error code of a dynamic pw. 57385:MTU negotiation failure between local end and remote end, 57386:Control word mode negotiation failure between local end and remote end, 57387:RTP enable/disable negotiation failure between local end and remote end, 57388:Payload size negotiation failure between local end and remote end, 57389:Bit rate negotiation failure between local end and remote end, 57390:PW GR restoration failure, 57391:PW cancellation message received from remote end, 58347:The PW status is down because the session status is down, 58348:The PW status is down because the AC status is down, 58349:The PW status is down because the tunnel status is down, 58350:The PW status is down because the remote status is down

Context

MIB
OPTIX-PW-MIB
OID
.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.15
Type
column
Access
readonly
Status
current
Parent
optixDynLdpPWEntry
Table
optixDynLdpPWTable
Siblings
15

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optixDynLdpPWIndex
This object describes the index of a dynamic PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.1
optixDynLdpPWCWEn
This object describes whether to enable the control word of the VCCV.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.10
optixDynLdpPWCCType
This object describes the control channel type of the VCCV.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.11
optixDynLdpPWCVType
This object describes the check mode of the VCCV.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.12
optixDynLdpPWATMCellNum
This object describes the actual number of cascaded ATM cells of a dynamic PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.13
optixDynLdpPWCESRTP
This object describes whether the RTP header encapsulation is enabled on a dynamic PW.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.14
optixDynLdpPWtype
This object describes the type of a dynamic PW.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.2
optixDynLdpPWRowStatus
This object describes the row status. 1: active 4: createAndGo 6: destroy.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.255
optixDynLdpPWId
This object describes the ID of a dynamic PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.3
optixDynLdpPWDirection
This object describes the direction of a dynamic PW.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.4
optixDynLdpPWPosition
This object describes the node location of a dynamic PW. 0: null 1: ingress 2: egress
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.5
optixDynLdpPWInLabel
This object describes the ingress label of a dynamic PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.6
optixDynLdpPWOutLabel
This object describes the egress label of a dynamic PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.7
optixDynLdpPWPeerIp
This object describes the peer IP address of a dynamic PW.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.8
optixDynLdpPWTunnelIndex
This object describes the index to the tunnel carried over the PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.9