NTNTECH-MTM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

diffServTable

table

.0.3.1.2 · 1 row entry · 15 columns

Open in standard view

This table describes objects applicable to managing a Differentiated Services
Code Point (DSCP) Rule. DSCP provides OSI Layer 3 identification information within
a packet's IP header for the purpose of determining packet type. Up to four (4) seperate
DiffServ Rules may be configured per port.

diffServEntry entry .0.3.1.2.1

Indexes

NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIBifCfgSlotIndex NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIBifCfgPortIndex diffServIndex

Column Syntax OID

diffServIndex

A pointer to one of four possible DSCP Rules that can be assigned to a port.

Integer32

Constraints:
range: 1-4

.0.3.1.2.1.1

diffServActivateRule

Activate or deactivate the rule that is represented by the remaining attributes of this
table.

Enumerationr/w

Enumerated Values:

1	active
2	inactive

.0.3.1.2.1.2

diffServDSValue

The value assigned to a port which designates the Differentiated Services Code Point. This
is a hexidecimal value calculated from the upper six (6) bits of an eight (8) bit field in
the packet's IP header (the remaini…

Integer32r/w

Constraints:
range: 1-252

.0.3.1.2.1.3

diffServDSMask

The value assigned indicates which six (6) bits of the DSCP will be utilized in considering the
packets DSCP type. Default is 252, indicating that all of the DSCP's upper six bits will be used in
calculating the packe…

Integer32r/w

Constraints:
range: 1-252

.0.3.1.2.1.4

diffServAllowTagOnIngress

The value assigned will determine a path for ingress packets. Tag (1) indicates that
only ingress packets with a vlan tag to be considered; all ingress packets without
a VLAN tag will be dropped. Untag (2) indicates t…

Enumerationr/w

Enumerated Values:

1	tag
2	untag

.0.3.1.2.1.5

diffServVlanIDStart

If diffServAllowTagOnIngress is set to tag(1), then this value dictates the beginning of a VLAN range
that ingress packets will be allowed to have. If diffServAllowTagOnIngress is set to untag(2), and
diffServTagAction…

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.2.1.6

diffServVlanIDEnd

If diffServAllowTagOnIngress is set to tag(1), then this value dictates the end of a VLAN range
that ingress packets will be allowed to have.

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.2.1.7

diffServTagActionOnIngress

The value assigned will alter the VLAN information of the Ingress Packet.

1 -- Add VLAN information to the Ingress Packet
2 -- Keep VLAN information on the Ingress Packet
3 -- Replace VLAN information …

Enumerationr/w

Enumerated Values:

1	add
2	keep
3	replace
4	drop
5	inaction

.0.3.1.2.1.8

diffServReplaceVlanID

The value assigned dictates to which VLAN ID we will change the ingress packets VLAN ID. This attribute
is valid only if tag(1) is chosen for diffServAllowTagOnIngress and replace(3) is chosen for
diffServTagActionOnIng…

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.2.1.9

diffServPriority

The value assigned to a port which indicates VLAN priority. This priority is relevant
both within the DSLAM and at egress.

Integer32r/w

Constraints:
range: 0-7

.0.3.1.2.1.10

diffServFixedMaxValue

The value assigned dictates the action to be taken with the configured diffServPriority
for tagged ingress packets. The default value is fixed(1). If set to fixed(1), the packet's ingress
priority will automatically b…

Enumerationr/w

Enumerated Values:

1	fixed
2	max

.0.3.1.2.1.11

diffServIngressRateLimit

The value assigned allows traffic-specific, rule-specific, bandwidth limits for each port.
The unit of measure is kbps. The default value is 0 (no limit).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.0.3.1.2.1.12

diffServEgressRateLimit

The value assigned allows traffic-specific, rule-specific, bandwidth limits for each port.
The unit of measure is kbps. The default value is 0 (no limit).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.0.3.1.2.1.13

diffServBackboneVlanID

The value assigned will dictate what VLAN ID we add as the Q-in-Q VLAN ID to all ingress traffic
passing this diffserv rule set.

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.2.1.14

diffServPVCIndex

The value assigned describes a PVC index that the ingress traffic defined by this diffServ rule
is expected to be received on.

Integer32r/w

Constraints:
range: 1-4

.0.3.1.2.1.15

ipRangeTable

table

.0.3.1.4 · 1 row entry · 14 columns

Open in standard view

This table defines MTM rules associated with an IP Address or an IP Address Range.  Up to 
four (4) seperate IP Range Rules may be configured per port.

ipRangeEntry entry .0.3.1.4.1

An entry containing management information applicable to an IPD12000, IPD4000
Access/Inverse module and Mini/Micro DSLAM port.

Indexes

NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIBifCfgSlotIndex NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIBifCfgPortIndex ipRangeIndex

Column Syntax OID

ipRangeIndex

A pointer to one of four possible IP Range Rules that can be assigned to a port.

Integer32

Constraints:
range: 1-4

.0.3.1.4.1.1

ipRangeActivateRule

Setting this value, activates the rule that is represented by the remaining attributes of this
table.

Enumerationr/w

Enumerated Values:

1	active
2	inactive

.0.3.1.4.1.2

ipRangeStart

The value assigned to a port which designates the start of an IP range. Packets
containing a source and/or desitination IP address that falls within the configured
range will match the IP portion of the IP Range Rule. …

NTNTECH-ROOT-MIBNtnIpAddressr/w

Textual Convention: NTNTECH-ROOT-MIBNtnIpAddress OctetString

Type Constraints:
range: 4

.0.3.1.4.1.3

ipRangeEnd

The value assigned to a port which designates the end of an IP range. Packets containing a
source and/or destination IP address that falls within the configured range will match the IP
portion of the IP Range Rule. D…

NTNTECH-ROOT-MIBNtnIpAddressr/w

Textual Convention: NTNTECH-ROOT-MIBNtnIpAddress OctetString

Type Constraints:
range: 4

.0.3.1.4.1.4

ipRangeAllowTagOnIngress

The value assigned will determine a path for ingress packets. Tag indicates that
only ingress packets with a vlan tag to be considered; all ingress packets without
a VLAN tag will be dropped. Untag indicates that only…

Enumerationr/w

Enumerated Values:

1	tag
2	untag

.0.3.1.4.1.5

ipRangeVlanIDStart

The value assigned to a port which designates the start of a VLAN ID range. This
should only be defined if vlanRulesAllowTagOnIngress is set to tag (1).

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.4.1.6

ipRangeVlanIDEnd

The value assigned to a port which designates the end of a VLAN ID range. This
should only be defined if vlanRulesAllowTagOnIngress is set to tag (1).

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.4.1.7

ipRangeTagActionOnIngress

Enumerationr/w

Enumerated Values:

1	add
2	keep
3	replace
4	drop
5	inaction

.0.3.1.4.1.8

ipRangePriority

The value assigned to a port which indicates priority. This priority is relevant
both within the DSLAM and at egress.

Integer32r/w

Constraints:
range: 0-7

.0.3.1.4.1.9

ipRangeFixedMaxValue

The value assigned dictates the action to be taken with the configured ipRangePriority
for tagged ingress packets. The default value is fixed.If set to Fixed, the packet's ingress
priority will automatically be replac…

Enumerationr/w

Enumerated Values:

1	fixed
2	max

.0.3.1.4.1.10

ipRangeIngressRateLimit

The value assigned allows traffic-specific, rule-specific, bandwidth limits for each port.
The unit of measure is kbps. The default value is 0 (no limit).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.0.3.1.4.1.11

ipRangeEgressRateLimit

The value assigned allows traffic-specific, rule-specific, bandwidth limits for each port.
The unit of measure is kbps. The default value is 0 (no limit).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.0.3.1.4.1.12

ipRangeBackboneVlanID

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.4.1.13

ipRangePVCIndex

The value assigned describes a PVC that is assigned to this port for MTM purposes.

Integer32r/w

Constraints:
range: 1-4

.0.3.1.4.1.14

macAddrRangeTable

table

.0.3.1.6 · 1 row entry · 14 columns

Open in standard view

This table defines MTM rules associated with a Mac Address or Mac Address Range.  These rules can be 
established on a per port basis. Up to four (4) seperate Mac Address Rules may be configured per port.

macAddrRangeEntry entry .0.3.1.6.1

An entry containing management information applicable to an IPD12000, IPD4000
Access/Inverse module and Mini/Micro DSLAM port.

Indexes

NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIBifCfgSlotIndex NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIBifCfgPortIndex macAddrIndex

Column Syntax OID

macAddrRangeIndex

A pointer to one of four possible Mac Address Rules that can be assigned to a port.

Integer32

Constraints:
range: 1-4

.0.3.1.6.1.1

macAddrRangeActivateRule

Setting this value, activates the rule that is represented by the remaining attributes of this
table.

Enumerationr/w

Enumerated Values:

1	active
2	inactive

.0.3.1.6.1.2

macAddrRangeStart

The value assigned to a port which designates the start of a MAC Address range. This
should only be defined if macaddrAllowTagOnIngress is set to tag.

NTNTECH-ROOT-MIBNtnMacAddressr/w

Textual Convention: NTNTECH-ROOT-MIBNtnMacAddress OctetString

Type Constraints:
range: 6

.0.3.1.6.1.3

macAddrRangeEnd

The value assigned to a port which designates the end of a MAC Address range. This should
only be defined if macaddrAllowTagOnIngress is set to tag.

NTNTECH-ROOT-MIBNtnMacAddressr/w

Textual Convention: NTNTECH-ROOT-MIBNtnMacAddress OctetString

Type Constraints:
range: 6

.0.3.1.6.1.4

macAddrRangeAllowTagOnIngress

The value assigned will determine a path for ingress packets. Tag(1) indicates that
only ingress packets with a vlan tag to be considered; all ingress packets without
a VLAN tag will be dropped. Untag(2) indicates tha…

Enumerationr/w

Enumerated Values:

1	tag
2	untag

.0.3.1.6.1.5

macAddrRangeVlanIDStart

The value assigned to a port which designates the start of a VLAN ID range. This
should only be defined if vlanRulesAllowTagOnIngress is set to tag (1).

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.6.1.6

macAddrRangeVlanIDEnd

The value assigned to a port which designates the end of a VLAN ID range. This
should only be defined if vlanRulesAllowTagOnIngress is set to tag (1).

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.6.1.7

macAddrRangeTagActionOnIngress

The value assigned will alter the VLAN information of the Ingress Packet.
1 -- Add VLAN information to the Ingress Packet
2 -- Keep VLAN information on the Ingress Packet
3 -- Replace VLAN information on …

Enumerationr/w

Enumerated Values:

1	add
2	keep
3	replace
4	drop
5	inaction

.0.3.1.6.1.8

macAddrRangePriority

The value assigned to a port which indicates VLAN priority. This priority is relevant
both within the DSLAM and at egress.

Integer32r/w

Constraints:
range: 0-7

.0.3.1.6.1.9

macAddrRangeFixedMaxValue

The value assigned dictates the action to be taken with the configured macaddrPriority
for tagged ingress packets. The default value is fixed. If set to Fixed, the packet's ingress
priority will automatically be repla…

Enumerationr/w

Enumerated Values:

1	fixed
2	max

.0.3.1.6.1.10

macAddrRangeIngressRateLimit

The value assigned allows traffic-specific, rule-specific, bandwidth limits for each port.
The unit of measure is kbps. The default value is 0 (no limit).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.0.3.1.6.1.11

macAddrRangeEgressRateLimit

The value assigned allows traffic-specific, rule-specific, bandwidth limits for each port.
The unit of measure is kbps. The default value is 0 (no limit).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.0.3.1.6.1.12

macAddrRangeBackboneVlanID

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.6.1.13

macAddrRangePVCIndex

The value assigned describes a PVC that is assigned to this port for MTM purposes.

Integer32r/w

Constraints:
range: 1-4

.0.3.1.6.1.14

vlanRulesTable

table

.0.3.1.8 · 1 row entry · 12 columns

Open in standard view

This table defines MTM rules associated with a VLAN or a VLAN Range.  These rules can be 
established on a per port basis. Up to ten (10) seperate VLAN Rules may be configured per port.

vlanRulesEntry entry .0.3.1.8.1

An entry containing management information applicable to an IPD12000, IPD4000
Access/Inverse module and Mini/Micro DSLAM port.

Indexes

NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIBifCfgSlotIndex NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIBifCfgPortIndex vlanRulesVLANIndex

Column Syntax OID

vlanRulesVLANIndex

A pointer to one of ten possible VLAN Rules that can be assigned to a port.

Integer32

Constraints:
range: 1-10

.0.3.1.8.1.1

vlanRulesActivateRule

Setting this value, activates the rule that is represented by the remaining attributes of this
table.

Enumerationr/w

Enumerated Values:

1	active
2	inactive

.0.3.1.8.1.2

vlanRulesAllowTagOnIngress

Enumerationr/w

Enumerated Values:

1	tag
2	untag

.0.3.1.8.1.3

vlanRulesVLANIdStart

The value assigned to a port which designates the start of a VLAN ID range. This
should only be defined if vlanRulesAllowTagOnIngress is set to tag.

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.8.1.4

vlanRulesVLANIdEnd

The value assigned to a port which designates the end of a VLAN ID range. This should
only be defined if vlanRulesAllowTagOnIngress is set to tag.

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.8.1.5

vlanRulesTagActionOnIngress

The value assigned will allow VLAN information to be added to the Ingress Packet.

1 -- Add VLAN information to the Ingress Packet
2 -- Keep VLAN information on the Ingress Packet
3 -- Replace VLAN i…

Enumerationr/w

Enumerated Values:

1	add
2	keep
3	replace
4	drop
5	noAction

.0.3.1.8.1.6

vlanRulesPriority

The value assigned to a port which indicates VLAN priority. This priority is relevant
both within the DSLAM and at egress.

Integer32r/w

Constraints:
range: 0-7

.0.3.1.8.1.7

vlanRulesFixedMaxValue

The value assigned dictates the action to be taken with the configured vlanRulesPriority
for tagged ingress packets. The default value is fixed. If set to Fixed, the packet's ingress
priority will automatically be rep…

Enumerationr/w

Enumerated Values:

1	fixed
2	max

.0.3.1.8.1.8

vlanRulesIngressRateLimit

The value assigned allows traffic-specific, rule-specific, bandwidth limits for each port.
The unit of measure is kbps. The default value is 0 (no limit).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.0.3.1.8.1.9

vlanRulesEgressRateLimit

The value assigned allows traffic-specific, rule-specific, bandwidth limits for each port.
The unit of measure is kbps. The default value is 0 (no limit).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.0.3.1.8.1.10

vlanRulesBackboneVlanID

Integer32r/w

Constraints:
range: 0-4085

.0.3.1.8.1.11

vlanRulesPVCIndex

The value assigned describes a PVC that is assigned to this port for MTM purposes.

Integer32r/w

Constraints:
range: 1-4

.0.3.1.8.1.12