diffServDSMask
NTNTECH-MTM-MIB ·
.0.3.1.2.1.4
Object
column
r/w
Integer32
The value assigned indicates which six (6) bits of the DSCP will be utilized in considering the packets DSCP type. Default is 252, indicating that all of the DSCP's upper six bits will be used in calculating the packet's DS value.
Context
- MIB
- NTNTECH-MTM-MIB
- OID
.0.3.1.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- diffServEntry
- Table
- diffServTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-252
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| diffServIndex A pointer to one of four possible DSCP Rules that can be assigned to a port. | column | Integer32 | .0.3.1.2.1.1 |
| diffServPriority The value assigned to a port which indicates VLAN priority. This priority is relevant
both within the DSLAM and at egress. | column | Integer32 | .0.3.1.2.1.10 |
| diffServFixedMaxValue The value assigned dictates the action to be taken with the configured diffServPriority
for tagged ingress packets. The default value is fixed(1). If set to fixed(1), the packet'… | column | Enumeration | .0.3.1.2.1.11 |
| diffServIngressRateLimit The value assigned allows traffic-specific, rule-specific, bandwidth limits for each port.
The unit of measure is kbps. The default value is 0 (no limit). | column | Integer32 | .0.3.1.2.1.12 |
| diffServEgressRateLimit The value assigned allows traffic-specific, rule-specific, bandwidth limits for each port.
The unit of measure is kbps. The default value is 0 (no limit). | column | Integer32 | .0.3.1.2.1.13 |
| diffServBackboneVlanID The value assigned will dictate what VLAN ID we add as the Q-in-Q VLAN ID to all ingress traffic
passing this diffserv rule set. | column | Integer32 | .0.3.1.2.1.14 |
| diffServPVCIndex The value assigned describes a PVC index that the ingress traffic defined by this diffServ rule
is expected to be received on. | column | Integer32 | .0.3.1.2.1.15 |
| diffServActivateRule Activate or deactivate the rule that is represented by the remaining attributes of this
table. | column | Enumeration | .0.3.1.2.1.2 |
| diffServDSValue The value assigned to a port which designates the Differentiated Services Code Point. This
is a hexidecimal value calculated from the upper six (6) bits of an eight (8) bit field… | column | Integer32 | .0.3.1.2.1.3 |
| diffServAllowTagOnIngress The value assigned will determine a path for ingress packets. Tag (1) indicates that
only ingress packets with a vlan tag to be considered; all ingress packets without
a VLAN ta… | column | Enumeration | .0.3.1.2.1.5 |
| diffServVlanIDStart If diffServAllowTagOnIngress is set to tag(1), then this value dictates the beginning of a VLAN range
that ingress packets will be allowed to have. If diffServAllowTagOnIngress is… | column | Integer32 | .0.3.1.2.1.6 |
| diffServVlanIDEnd If diffServAllowTagOnIngress is set to tag(1), then this value dictates the end of a VLAN range
that ingress packets will be allowed to have. | column | Integer32 | .0.3.1.2.1.7 |
| diffServTagActionOnIngress The value assigned will alter the VLAN information of the Ingress Packet.
1 -- Add VLAN information to the Ingress Packet
2 -- Keep VLAN information on the Ingres… | column | Enumeration | .0.3.1.2.1.8 |
| diffServReplaceVlanID The value assigned dictates to which VLAN ID we will change the ingress packets VLAN ID. This attribute
is valid only if tag(1) is chosen for diffServAllowTagOnIngress and replace… | column | Integer32 | .0.3.1.2.1.9 |