NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
61

ifCfgPortTable

table
.1.3.6.1.4.1.8059.1.2.1.1.1.2.1 · 1 row entry · 13 columns
Open in standard view 
A list of IPD12000, IPD4000 Access/Inverse module and Mini/Micro
DSLAM entries.
ifCfgPortEntry entry .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1
An entry containing management information applicable to the IPD12000, IPD4000
Access/Inverse module as well as the Mini/Micro DSLAM.
Indexes
ifCfgSlotIndex ifCfgPortIndex
Column Syntax OID
ifCfgSlotIndex
The physical slot number of the IPD chassis to which the interface module resides.
The Mini/Micro DSLAM will have a slot index value of 1.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.1
ifCfgPortIndex
The physical port number of the interface.
Integer32
Constraints:
range: 1-48
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.2
ifCfgPortCircuitID
The circuit identification number assigned to a port on an interface.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.3
ifCfgPortFltrIp1Start
The value assigned to a port which designates the start of the first
Ip filter range.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.4
ifCfgPortFltrIp1End
The value assigned to a port which designates the end of the first
Ip filter range.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.5
ifCfgPortFltrIp2Start
The value assigned to a port which designates the start of the second
Ip filter range.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.6
ifCfgPortFltrIp2End
The value assigned to a port which designates the end of the second
Ip filter range.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.7
ifCfgPortBackboneVlan
The Backbone VLAN tag will become the primary identifier that can be
used by routers with backbone capabilities to direct traffic to the
appropriate network cloud.
Integer32r/w
Constraints:
range: 0-4085
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.8
ifCfgPortVlanPriority
The value assigned to a port which designates the VLAN priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.9
ifCfgPortFloodMde
The value assigned to a port which designates the flood mode.
Enumerationr/w
Enumerated Values:
1uplFlood
2vlnFlood
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.10
ifCfgPortIpFltProtocol
The value assigned to a port which designates the IP filter protocol.
Enumerationr/w
Enumerated Values:
1protocolALL
2protocolIP
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.11
ifCfgPortReset
This value is always read as integer value 2.

Reset all associated port statistics to zero upon initiation of the
reset(1).
Enumerationr/w
Enumerated Values:
1reset
2noReset
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.12
ifCfgPortBkBoneEthType
The value assigned to a port which designates the ethernet packet type.
Enumerationr/w
Enumerated Values:
1ethtype8100
2ethtype9100
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.13

ifCfgPortVLANTable

table
.1.3.6.1.4.1.8059.1.2.1.1.1.2.2 · 1 row entry · 5 columns
Open in standard view 
A list of IPD12000, IPD4000 Access/Inverse module and Mini/Micro DSLAM
port 802.1Q VLAN entries.
ifCfgPortVLANEntry entry .1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1
An entry containing management information applicable to an IPD12000, IPD4000
Access/Inverse module and Mini/Micro DSLAM port.
Indexes
ifCfgIfSlotIndex ifCfgIfPortIndex ifCfgVLANIndex
Column Syntax OID
ifCfgIfSlotIndex
The physical slot number of the IPD chassis to which the interface module
resides. The Mini/Micro slot index will be 1.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.1
ifCfgIfPortIndex
The physical port number of the interface.
Integer32
Constraints:
range: 1-48
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.2
ifCfgVLANIndex
A pointer to one of ten possible VLAN tags that can be assigned to a port.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.3
ifCfgVLANIdStart
The value assigned to a port which designates the start of a VLAN ID range.
Integer32r/w
Constraints:
range: 0-4085
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.4
ifCfgVLANIdEnd
The value assigned to a port which designates the end of a VLAN ID range.
Integer32r/w
Constraints:
range: 0-4085
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.2.1.5

ifCfgPortAdslTable

table
.1.3.6.1.4.1.8059.1.2.1.1.1.2.3 · 1 row entry · 23 columns
Open in standard view 
A list of ADSL interface entries.
ifCfgPortAdslEntry entry .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1
An entry containing management information applicable to ADSL module.
Indexes
ifCfgAdslSlotIndex ifCfgAdslPortIndex
Column Syntax OID
ifCfgAdslSlotIndex
The physical slot number of the IPD chassis to which the interface module
resides. The Mini/Micro slot index will be 1.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.1
ifCfgAdslPortIndex
The physical port number of the ADSL interface.
Integer32
Constraints:
range: 1-48
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.2
ifCfgPortAdslPortMode
The port mode of operation, ON, OFF, or Adaptive.

When a port is set to Adaptive mode, the best possible value for the
Rx/Tx data rates will be achieved. A successful data rate connection
will be indicat…
Enumerationr/w
Enumerated Values:
1on
2off
3adaptive
4fixedadaptive
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.3
ifCfgPortAdslVpiVciDetect
ADSL Virtual Path Identifier (VPI) and Virtual Channel Identifier
(VCI) detect mode. If this mode is set to ON, auto-detect the line
VPI and VCI values.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.4
ifCfgPortAdslRxRate
ADSL upstream (Rx) data rate.

The available upstream data rates range from 32Kbps to 1024Kbps.
The upstream data rate can be set by the user via the set value x
where x = 1 to 32. The actual data r…
KbpsInteger32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.5
ifCfgPortAdslTxRate
ADSL downstream (Tx) data rates.

The available downstream data rates range from 32Kbps to 8064Kbps.
The downstream data rate can be set by the user via the set value x
where x = 1 to 252. The actual da…
KbpsInteger32r/w
Constraints:
range: 1-252
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.6
ifCfgPortAdslFrameType
ADSL frame type.
Enumerationr/w
Enumerated Values:
1frameType1483LLC
2frameType1483VCM
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.7
ifCfgPortAdslVpi
ADSL Virtual Path Identifier (VPI) value.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.8
ifCfgPortAdslVci
ADSL Virtual Channel Identifier (VCI).
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.9
ifCfgPortAdslStandardMde
ADSL standard modes of operation.

Note: if receive a standard mode of integer value 255 (0xFF), this would
indicate that the standard mode is unknown due to a port 'linkdown'
condition.
Enumerationr/w
Enumerated Values:
1t1413
2gLite
3gDMT
4multiMode
5aLCATEL
6gDMT-BIS
7gDMT-BISplus
8gDMT-BIS-Annex-L
9gDMT-BIS-Annex-M
255stdMdeNoLink
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.10
ifCfgPortAdslCorrectionUp
ADSL Impulse protection duration in the Upstream duration.
Enumerationr/w
Enumerated Values:
1corr125us
2corr250us
3corr500us
4corr1ms
5corr2ms
6corr4ms
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.11
ifCfgPortAdslCorrectionDn
ADSL Impulse protection duration in the Upstream duration.
Enumerationr/w
Enumerated Values:
1corr125us
2corr250us
3corr500us
4corr1ms
5corr2ms
6corr4ms
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.12
ifCfgPortAdslDelayUp
ADSL Impulse protection duration in the Upstream direction.
Enumerationr/w
Enumerated Values:
1delay1ms
2delay2ms
3delay4ms
4delay8ms
5delay16ms
6delay32ms
7delay64ms
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.13
ifCfgPortAdslDelayDn
ADSL Impulse protection duration in the Upstream direction.
Enumerationr/w
Enumerated Values:
1delay1ms
2delay2ms
3delay4ms
4delay8ms
5delay16ms
6delay32ms
7delay64ms
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.14
ifCfgPortAdslEcFdm
ADSL Echo Cancellation uses Upstream Tones for Upstream and Dnstream data.
Enumerationr/w
Enumerated Values:
1ec
2fdm
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.15
ifCfgPortAdslFastBuffer
Selects fast buffer/low latency. Same is interleave delay of 1ms
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.16
ifCfgPortAdslSnrUp
Selects Target Upstream SNR
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.17
ifCfgPortAdslSnrDn
Selects Target Dnstream SNR
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.18
ifCfgPortAdslActualRxRate
ADSL upstream (Rx) data rate.

The available upstream data rates range from 32Kbps to 1024Kbps.
The upstream data rate can be set by the user via the set value x
where x = 1 to 64. The actual data r…
KbpsInteger32
Constraints:
range: 0-64
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.19
ifCfgPortAdslActualTxRate
ADSL downstream (Tx) data rates.

The available downstream data rates range from 32Kbps to 8064Kbps.
The downstream data rate can be set by the user via the set value x
where x = 1 to 1024. The actual d…
KbpsInteger32
Constraints:
range: 0-1024
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.20
ifCfgPortAdslActualStandardMde
ADSL current operating mode, should match ifCfgPortAdslStandardMde UNLESS operating in MULTIMODE
Enumeration
Enumerated Values:
1t1413
2gLite
3gDMT
4multiMode
5aLCATEL
6gDMT-BIS
7gDMT-BISplus
8gDMT-BIS-Annex-L
9gDMT-BIS-Annex-M
255stdMdeNoLink
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.21
ifCfgPortAdslActualDepthUp
ADSL upstream interleving depth.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.22
ifCfgPortAdslActualDepthDn
ADSL dnstream interleaving depth.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.3.1.23

ifCfgPortIdslTable

table
.1.3.6.1.4.1.8059.1.2.1.1.1.2.4 · 1 row entry · 3 columns
Open in standard view 
A list of IDSL interface entries.
ifCfgPortIdslEntry entry .1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1
An entry containing management information applicable to the IDSL interface.
Indexes
ifCfgIdslSlotIndex ifCfgIdslPortIndex
Column Syntax OID
ifCfgIdslSlotIndex
The physical slot number of the IPD chassis to which the interface module
resides. The Mini/Micro slot index will be 1.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1.1
ifCfgIdslPortIndex
The physical port number of the IDSL interface.
Integer32
Constraints:
range: 1-48
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1.2
ifCfgPortIdslRxTxRate
IDSL symetrical (Rx/Tx) data rates.

IDSL module types and the associated Rx/Tx data rates-

IAM144-12:
Data Rates (Kbps): 128,144
…
KbpsEnumerationr/w
Enumerated Values:
0idslRxTxRateDefect
1idslRxTxRate128
2idslRxTxRate144
255idslRxTxRateOff
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.4.1.3

ifCfgPortSdslTable

table
.1.3.6.1.4.1.8059.1.2.1.1.1.2.5 · 1 row entry · 4 columns
Open in standard view 
A list of SDSL interface entries.
ifCfgPortSdslEntry entry .1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1
An entry containing management information applicable to the SDSL interface.
Indexes
ifCfgSdslSlotIndex ifCfgSdslPortIndex
Column Syntax OID
ifCfgSdslSlotIndex
The physical slot number of the IPD chassis to which the interface module
resides. The Mini/Micro slot index will be 1.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.1
ifCfgSdslPortIndex
The physical port number of the SDSL interface.
Integer32
Constraints:
range: 1-48
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.2
ifCfgPortSdslRxTxRate
SDSL symetrical (Rx/Tx) data rates.


SDSL module types and the associated Rx/Tx data rates-

SAM1000-12:
Data Rates (Kbps): 272,528,784,1168
…
KbpsEnumerationr/w
Enumerated Values:
0sdslRxTxRateDefect
1sdslRxTxRate144
2sdslRxTxRate272
3sdslRxTxRate400
4sdslRxTxRate528
5sdslRxTxRate784
6sdslRxTxRate1040
7sdslRxTxRate1168
8sdslRxTxRate1552
9sdslRxTxRate2064
10sdslRxTxRate2320
255sdslRxTxRateOff
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.3
ifCfgPortSdslLineCode
Line code for the SDSL modules.

Note, the line code may be set on the following modules,
SIM2000-12,SIM2000-24,SIM2000V-24,SIM2000V-12, or the
SDSL micro DSLAM.

The line code options …
Enumerationr/w
Enumerated Values:
1lineCodeCap
2lineCode2B1Q
3lineCodeGSHDSL
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.4

ifCfgPortT1Table

table
.1.3.6.1.4.1.8059.1.2.1.1.1.2.6 · 1 row entry · 7 columns
Open in standard view 
A list of T1 interface entries.
ifCfgPortT1Entry entry .1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1
An entry containing management information applicable to the T1 interface.
Indexes
ifCfgT1SlotIndex ifCfgT1PortIndex
Column Syntax OID
ifCfgT1SlotIndex
The physical slot number of the IPD chassis to which the interface module
resides. The Mini/Micro slot index will be 1.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.1
ifCfgT1PortIndex
The physical port number of the T1 interface.
Integer32
Constraints:
range: 1-48
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.2
ifCfgPortT1RxTxRate
T1 symetrical (Rx/Tx) data rates.

T1 module types and the associated Rx/Tx data rates-

TAM1500-12,TIM1500-12,TIM1500-24:
Data Rates (Kbps): 192,384,576,768,960,115…
KbpsEnumerationr/w
Enumerated Values:
0t1RxTxRateDefect
1t1RxTxRate192
2t1RxTxRate384
3t1RxTxRate576
4t1RxTxRate768
5t1RxTxRate960
6t1RxTxRate1152
7t1RxTxRate1344
8t1RxTxRate1536
255t1RxTxRateOff
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.3
ifCfgPortT1FrameType
T1 frame type.
Enumerationr/w
Enumerated Values:
1t1frameTypeESF
2t1frameTypeSFD4
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.4
ifCfgPortT1LineCode
T1 line code.
Enumerationr/w
Enumerated Values:
1t1lineCodeB8ZS
2t1lineCodeAMI
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.5
ifCfgPortT1TxBuildOut
T1 tx buildout.
Enumerationr/w
Enumerated Values:
1t1TxBuildOut0db
2t1TxBuildOutN7p5db
3t1TxBuildOutN15db
4t1TxBuildOutN22db
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.6
ifCfgPortT1ClockSrc
T1 clock source.
Enumerationr/w
Enumerated Values:
1t1ClockSrcLocal
2t1ClockSrcLoop
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.6.1.7

ifCfgPortE1Table

table
.1.3.6.1.4.1.8059.1.2.1.1.1.2.7 · 1 row entry · 6 columns
Open in standard view 
A list of E1 interface entries.
ifCfgPortE1Entry entry .1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1
An entry containing management information applicable to the E1 interface.
Indexes
ifCfgE1SlotIndex ifCfgE1PortIndex
Column Syntax OID
ifCfgE1SlotIndex
The physical slot number of the IPD chassis to which the interface module
resides. The Mini/Micro slot index will be 1.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.1
ifCfgE1PortIndex
The physical port number of the E1 interface.
Integer32
Constraints:
range: 1-48
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.2
ifCfgPortE1RxTxRate
E1 symetrical (Rx/Tx) data rates.

E1 module types and the associated Rx/Tx data rates-

EAM2000-12,EIM2000-12,EIM2000-24:
Data Rates (Kbps): 256,512,768,1024,1280,1…
KbpsEnumerationr/w
Enumerated Values:
0e1RxTxRateDefect
1e1RxTxRate256
2e1RxTxRate512
3e1RxTxRate768
4e1RxTxRate1024
5e1RxTxRate1280
6e1RxTxRate1536
7e1RxTxRate1792
8e1RxTxRate1984
255e1RxTxRateOff
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.3
ifCfgPortE1FrameType
E1 frame type.
Enumerationr/w
Enumerated Values:
1e1frameTypeCRC
2e1frameTypeNoCRC
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.4
ifCfgPortE1LineCode
E1 line code.
Enumerationr/w
Enumerated Values:
1e1lineCodeHDB3
2e1lineCodeAMI
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.5
ifCfgPortE1ClockSrc
E1 clock source.
Enumerationr/w
Enumerated Values:
1e1ClockSrcLocal
2e1ClockSrcLoop
 .1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.6