NETI-PM-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
15
Rows
15
Columns
147
pmTifTable
table.1.3.6.1.4.1.2928.6.2.17.1.1.1
·
1 row entry
·
19 columns
Table of Performance Monitored trunk interfaces
One entry for each trunk interface
Indexes
pmTifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
pmTifIndex
The index uniquely identifying this trunk interface.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.1 |
||||||
|
pmTifAdminStatus
The desired state of the PM function. Affects the operative
state of the PM object |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.2 |
||||||
|
pmTifOperStatus
PM operative state.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.3 |
||||||
|
pmTifFailure
Shows current failure state. An empty string indicates no
failure |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.4 |
||||||
|
pmTifDataSource
The PM Data Source object
|
ObjectIdentifier | .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.5 |
||||||
|
pmTifDataSourceName
The name of the PM Data Source
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.6 |
||||||
|
pmTifUatAlarmsEnabled
If set to `true(1)' then UAT alarms will be sent.
Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe errors for a longer period. It begins at detecti… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.7 |
||||||
|
pmTifTresholdAlarmsEnabled
If set to `true(1)' then threshold alarms will be sent.
Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold crossing alarm will be sent for the interval … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.8 |
||||||
|
pmTifPeriodicEventsEnabled
If set to `true(1)' then History Periodic Events will be sent.
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.9 |
||||||
|
pmTifZeroSuppressionEnabled
If set to `true(1)' then Zero Suppression mode is enabled
Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored in the history log or not. If enabled, once … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.10 |
||||||
|
pmTifHistorySize
The size of the history log
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.11 |
||||||
|
pmTif15mTresholdES
15 minute threshold value for ES.
Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter15mr/w Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.12 |
||||||
|
pmTif15mTresholdSES
15 minute threshold value for SES.
Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter15mr/w Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.13 |
||||||
|
pmTif15mTresholdBBE
15 minute threshold value for BBE.
Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
SNMPv2-SMIGauge32r/w Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.14 |
||||||
|
pmTif15mTresholdSS
15 minute threshold value for SS.
Current SS value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter15mr/w Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.15 |
||||||
|
pmTif24hTresholdES
24 hour threshold value for ES.
Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter24hr/w Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.16 |
||||||
|
pmTif24hTresholdSES
24 hour threshold value for SES.
Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter24hr/w Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.17 |
||||||
|
pmTif24hTresholdBBE
24 hour threshold value for BBE.
Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
SNMPv2-SMIGauge32r/w Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.18 |
||||||
|
pmTif24hTresholdSS
24 hour threshold value for SS.
Current SS value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter24hr/w Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.1.1.1.19 |
pmTifCurrentTable
table.1.3.6.1.4.1.2928.6.2.17.1.1.2
·
1 row entry
·
8 columns
Table of PM data for the current 15 minute period
One entry for each monitored object
Indexes
pmTifIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmTifCurrentTime
Elapsed time in seconds for the current 15 minute period.
|
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.2.1.2 |
||||
|
pmTifCurrentSuspect
Is Suspect flag, if set to `true(1)' the current 15 minute
measurement period has unreliable measurement data. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.1.2.1.3 |
||||
|
pmTifCurrentZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.2.1.4 |
||||
|
pmTifCurrentESs
Number of Errored Seconds (ES) for the current 15 minute
period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.2.1.5 |
||||
|
pmTifCurrentSESs
Number of Severe Errored Seconds (SES) for the current 15
minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.2.1.6 |
||||
|
pmTifCurrentBBEs
Number of Background Block Error (BBE) for the current 15 minute period.
BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.2.1.7 |
||||
|
pmTifCurrentUASs
Number of Unavailable Second (UAS) for the current 15 minute
period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection… |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.2.1.8 |
||||
|
pmTifCurrentSSs
Number of SLIP Second (SS) for the current 15 minute period.
SS is defined as one second containing one or more SLIPs |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.2.1.9 |
pmTif15mTable
table.1.3.6.1.4.1.2928.6.2.17.1.1.3
·
1 row entry
·
9 columns
Table of 15 minute PM log history
One entry for each 15 minute PM interval
Indexes
pmTifIndex pmTif15mIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmTif15mIndex
The index that identifies the interval for which the set of
statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.3.1.1 |
||||
|
pmTif15mTime
Time stamp for this 15 minute interval
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2928.6.2.17.1.1.3.1.2 |
||||
|
pmTif15mSuspect
Suspect flag for this 15 minute interval
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.1.3.1.3 |
||||
|
pmTif15mZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.3.1.4 |
||||
|
pmTif15mESs
Number of Errored Seconds (ES) for this 15 minute period.
ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.3.1.5 |
||||
|
pmTif15mSESs
Number of Severe Errored Seconds (SES) for this 15 minute
period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.3.1.6 |
||||
|
pmTif15mBBEs
Number of Background Block Error (BBE) for this 15 minute
period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.3.1.7 |
||||
|
pmTif15mUASs
Number of Unavailable Second (UAS) for this 15 minute period.
UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of the… |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.3.1.8 |
||||
|
pmTif15mSSs
Number of SLIP Second (SS) for this 15 minute period.
SS is defined as one second containing one or more SLIPs |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.3.1.9 |
pmTif24hTable
table.1.3.6.1.4.1.2928.6.2.17.1.1.4
·
1 row entry
·
9 columns
Table of 24 hour PM log history
One entry for each 24 hour PM interval
Indexes
pmTifIndex pmTif24hIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmTif24hIndex
The index that identifies the interval for which the set of
statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.4.1.1 |
||||
|
pmTif24hTime
Time stamp for this 24 hour interval
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2928.6.2.17.1.1.4.1.2 |
||||
|
pmTif24hSuspect
Suspect flag for this 24 hour interval
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.1.4.1.3 |
||||
|
pmTif24hZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.4.1.4 |
||||
|
pmTif24hESs
Number of Errored Seconds (ES) for this 24 hour period.
ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter24h Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.1.4.1.5 |
||||
|
pmTif24hSESs
Number of Severe Errored Seconds (SES) for this 24 hour
period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter24h Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.1.4.1.6 |
||||
|
pmTif24hBBEs
Number of Background Block Error (BBE) for this 24 hour
period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.4.1.7 |
||||
|
pmTif24hUASs
Number of Unavailable Second (UAS) for this 24 hour period.
UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them … |
Counter24h Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.1.4.1.8 |
||||
|
pmTif24hSSs
Number of SLIP Second (SS) for this 24 hour period.
SS is defined as one second containing one or more SLIPs |
Counter24h Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.1.4.1.9 |
pmTif24hCurrentTable
table.1.3.6.1.4.1.2928.6.2.17.1.1.5
·
1 row entry
·
8 columns
Table of PM data for the current 24 hour period
One entry for each monitored object
Indexes
pmTifIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmTif24hCurrentTime
Elapsed time in seconds for the current 24 hour period.
|
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.5.1.2 |
||||
|
pmTif24hCurrentSuspect
Is Suspect flag, if set to `true(1)' the current 24 hour
measurement period has unreliable measurement data. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.1.5.1.3 |
||||
|
pmTif24hCurrentZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.5.1.4 |
||||
|
pmTif24hCurrentESs
Number of Errored Seconds (ES) for the current 24 hour
period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.5.1.5 |
||||
|
pmTif24hCurrentSESs
Number of Severe Errored Seconds (SES) for the current 24
hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.5.1.6 |
||||
|
pmTif24hCurrentBBEs
Number of Background Block Error (BBE) for the current 24
hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.1.5.1.7 |
||||
|
pmTif24hCurrentUASs
Number of Unavailable Second (UAS) for the current 24 hour
period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection o… |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.5.1.8 |
||||
|
pmTif24hCurrentSSs
Number of SLIP Second (SS) for the current 24 hour period.
SS is defined as one second containing one or more SLIPs |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.1.5.1.9 |
pmAifTable
table.1.3.6.1.4.1.2928.6.2.17.1.2.1
·
1 row entry
·
17 columns
Table of Performance Monitored access interfaces
One entry for each access interface
Indexes
pmAifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
pmAifIndex
The index uniquely identifying this access interface.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.1 |
||||||
|
pmAifAdminStatus
The desired state of the PM function. Affects the operative
state of the PM object |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.2 |
||||||
|
pmAifOperStatus
PM operative state.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.3 |
||||||
|
pmAifFailure
Shows current failure state. An empty string indicates no
failure |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.4 |
||||||
|
pmAifDataSource
The PM Data Source object
|
ObjectIdentifier | .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.5 |
||||||
|
pmAifDataSourceName
The name of the PM Data Source
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.6 |
||||||
|
pmAifUatAlarmsEnabled
If set to `true(1)' then UAT alarms will be sent.
Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe errors for a longer period. It begins at detecti… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.7 |
||||||
|
pmAifTresholdAlarmsEnabled
If set to `true(1)' then threshold alarms will be sent.
Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold crossing alarm will be sent for the interval … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.8 |
||||||
|
pmAifPeriodicEventsEnabled
If set to `true(1)' then History Periodic Events will be
sent. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.9 |
||||||
|
pmAifZeroSuppressionEnabled
If set to `true(1)' then Zero Suppression mode is enabled
Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored in the history log or not. If enabled, once … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.10 |
||||||
|
pmAifHistorySize
The size of the history log
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.11 |
||||||
|
pmAif15mTresholdES
15 minute threshold value for ES.
Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter15mr/w Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.12 |
||||||
|
pmAif15mTresholdSES
15 minute threshold value for SES.
Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter15mr/w Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.13 |
||||||
|
pmAif15mTresholdBBE
15 minute threshold value for BBE.
Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
SNMPv2-SMIGauge32r/w Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.14 |
||||||
|
pmAif24hTresholdES
24 hour threshold value for ES.
Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter24hr/w Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.15 |
||||||
|
pmAif24hTresholdSES
24 hour threshold value for SES.
Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter24hr/w Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.16 |
||||||
|
pmAif24hTresholdBBE
24 hour threshold value for BBE.
Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
SNMPv2-SMIGauge32r/w Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.1.1.17 |
pmAifCurrentTable
table.1.3.6.1.4.1.2928.6.2.17.1.2.2
·
1 row entry
·
7 columns
Table of PM data for the current 15 minute period
One entry for each monitored object
Indexes
pmAifIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmAifCurrentTime
Elapsed time in seconds for the current 15 minute period.
|
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.2.1.2 |
||||
|
pmAifCurrentSuspect
Is Suspect flag, if set to `true(1)' the current 15 minute
measurement period has unreliable measurement data. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.2.2.1.3 |
||||
|
pmAifCurrentZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.2.1.4 |
||||
|
pmAifCurrentESs
Number of Errored Seconds (ES) for the current 15 minute
period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.2.1.5 |
||||
|
pmAifCurrentSESs
Number of Severe Errored Seconds (SES) for the current 15
minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.2.1.6 |
||||
|
pmAifCurrentBBEs
Number of Background Block Error (BBE) for the current 15
minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.2.1.7 |
||||
|
pmAifCurrentUASs
Number of Unavailable Second (UAS) for the current 15 minute
period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection… |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.2.1.8 |
pmAif15mTable
table.1.3.6.1.4.1.2928.6.2.17.1.2.3
·
1 row entry
·
8 columns
Table of 15 minute PM interval history
One entry for each 15 minute PM interval
Indexes
pmAifIndex pmAif15mIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmAif15mIndex
The index that identifies the interval for which the set of
statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.3.1.1 |
||||
|
pmAif15mTime
Time stamp for this 15 minute interval
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2928.6.2.17.1.2.3.1.2 |
||||
|
pmAif15mSuspect
Suspect flag for this 15 minute interval
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.2.3.1.3 |
||||
|
pmAif15mZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.3.1.4 |
||||
|
pmAif15mESs
Number of Errored Seconds (ES) for this 15 minute period.
ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.3.1.5 |
||||
|
pmAif15mSESs
Number of Severe Errored Seconds (SES) for this 15 minute
period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.3.1.6 |
||||
|
pmAif15mBBEs
Number of Background Block Error (BBE) for this 15 minute
period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.3.1.7 |
||||
|
pmAif15mUASs
Number of Unavailable Second (UAS) for this 15 minute period.
UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of the… |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.3.1.8 |
pmAif24hTable
table.1.3.6.1.4.1.2928.6.2.17.1.2.4
·
1 row entry
·
8 columns
Table of 24 hour PM log history
One entry for each 24 hour PM interval
Indexes
pmAifIndex pmAif24hIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmAif24hIndex
The index that identifies the interval for which the set of
statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.4.1.1 |
||||
|
pmAif24hTime
Time stamp for this 24 hour interval
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2928.6.2.17.1.2.4.1.2 |
||||
|
pmAif24hSuspect
Suspect flag for this 24 hour interval
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.2.4.1.3 |
||||
|
pmAif24hZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.4.1.4 |
||||
|
pmAif24hESs
Number of Errored Seconds (ES) for this 24 hour period.
ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter24h Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.2.4.1.5 |
||||
|
pmAif24hSESs
Number of Severe Errored Seconds (SES) for this 24 hour
period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter24h Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.2.4.1.6 |
||||
|
pmAif24hBBEs
Number of Background Block Error (BBE) for this 24 hour
period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.4.1.7 |
||||
|
pmAif24hUASs
Number of Unavailable Second (UAS) for this 24 hour period.
UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them … |
Counter24h Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.2.4.1.8 |
pmAif24hCurrentTable
table.1.3.6.1.4.1.2928.6.2.17.1.2.5
·
1 row entry
·
7 columns
Table of PM data for the current 24 hour period
One entry for each monitored object
Indexes
pmAifIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmAif24hCurrentTime
Elapsed time in seconds for the current 24 hour period.
|
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.5.1.2 |
||||
|
pmAif24hCurrentSuspect
Is Suspect flag, if set to `true(1)' the current 24 hour
measurement period has unreliable measurement data. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.2.5.1.3 |
||||
|
pmAif24hCurrentZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.5.1.4 |
||||
|
pmAif24hCurrentESs
Number of Errored Seconds (ES) for the current 24 hour
period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.5.1.5 |
||||
|
pmAif24hCurrentSESs
Number of Severe Errored Seconds (SES) for the current 24
hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.5.1.6 |
||||
|
pmAif24hCurrentBBEs
Number of Background Block Error (BBE) for the current 24
hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.2.5.1.7 |
||||
|
pmAif24hCurrentUASs
Number of Unavailable Second (UAS) for the current 24 hour
period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection o… |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.2.5.1.8 |
pmDchTable
table.1.3.6.1.4.1.2928.6.2.17.1.3.1
·
1 row entry
·
17 columns
Table of Performance Monitored DTM channel
One entry for each DTM channel
Indexes
pmDchIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
pmDchIndex
The index uniquely identifying this DTM channel.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.1 |
||||||
|
pmDchAdminStatus
The desired state of the PM function. Affects the operative
state of the PM object |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.2 |
||||||
|
pmDchOperStatus
PM operative state.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.3 |
||||||
|
pmDchFailure
Shows current failure state. An empty string indicates no
failure |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.4 |
||||||
|
pmDchDataSource
The PM Data Source object
|
ObjectIdentifier | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.5 |
||||||
|
pmDchDataSourceName
The name of the PM Data Source
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.6 |
||||||
|
pmDchUatAlarmsEnabled
If set to `true(1)' then UAT alarms will be sent.
Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe errors for a longer period. It begins at detecti… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.7 |
||||||
|
pmDchTresholdAlarmsEnabled
If set to `true(1)' then threshold alarms will be sent.
Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold crossing alarm will be sent for the interval … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.8 |
||||||
|
pmDchPeriodicEventsEnabled
If set to `true(1)' then History Periodic Events will be
sent. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.9 |
||||||
|
pmDchZeroSuppressionEnabled
If set to `true(1)' then Zero Suppression mode is enabled
Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored in the history log or not. If enabled, once … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.10 |
||||||
|
pmDchHistorySize
The size of the history log
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.11 |
||||||
|
pmDch15mTresholdES
15 minute threshold value for ES.
Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter15mr/w Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.12 |
||||||
|
pmDch15mTresholdSES
15 minute threshold value for SES.
Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter15mr/w Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.13 |
||||||
|
pmDch15mTresholdBBE
15 minute threshold value for BBE.
Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
SNMPv2-SMIGauge32r/w Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.14 |
||||||
|
pmDch24hTresholdES
24 hour threshold value for ES.
Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter24hr/w Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.15 |
||||||
|
pmDch24hTresholdSES
24 hour threshold value for SES.
Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
Counter24hr/w Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.16 |
||||||
|
pmDch24hTresholdBBE
24 hour threshold value for BBE.
Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. |
SNMPv2-SMIGauge32r/w Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.17 |
pmDchCurrentTable
table.1.3.6.1.4.1.2928.6.2.17.1.3.2
·
1 row entry
·
7 columns
Table of PM data for the current 15 minute period
One entry for each monitored object
Indexes
pmDchIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmDchCurrentTime
Elapsed time in seconds for the current 15 minute period.
|
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.2.1.2 |
||||
|
pmDchCurrentSuspect
Is Suspect flag, if set to `true(1)' the current 15 minute
measurement period has unreliable measurement data. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.3.2.1.3 |
||||
|
pmDchCurrentZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.2.1.4 |
||||
|
pmDchCurrentESs
Number of Errored Seconds (ES) for the current 15 minute
period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.2.1.5 |
||||
|
pmDchCurrentSESs
Number of Severe Errored Seconds (SES) for the current 15
minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.2.1.6 |
||||
|
pmDchCurrentBBEs
Number of Background Block Error (BBE) for the current 15
minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.2.1.7 |
||||
|
pmDchCurrentUASs
Number of Unavailable Second (UAS) for the current 15 minute
period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection… |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.2.1.8 |
pmDch15mTable
table.1.3.6.1.4.1.2928.6.2.17.1.3.3
·
1 row entry
·
8 columns
Table of 15 minute PM interval history
One entry for each 15 minute PM interval
Indexes
pmDchIndex pmDch15mIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmDch15mIndex
The index that identifies the interval for which the set of
statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.3.1.1 |
||||
|
pmDch15mTime
Time stamp for this 15 minute interval
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2928.6.2.17.1.3.3.1.2 |
||||
|
pmDch15mSuspect
Suspect flag for this 15 minute interval
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.3.3.1.3 |
||||
|
pmDch15mZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.3.1.4 |
||||
|
pmDch15mESs
Number of Errored Seconds (ES) for this 15 minute period.
ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.3.1.5 |
||||
|
pmDch15mSESs
Number of Severe Errored Seconds (SES) for this 15 minute
period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.3.1.6 |
||||
|
pmDch15mBBEs
Number of Background Block Error (BBE) for this 15 minute
period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.3.1.7 |
||||
|
pmDch15mUASs
Number of Unavailable Second (UAS) for this 15 minute period.
UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of the… |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.3.1.8 |
pmDch24hTable
table.1.3.6.1.4.1.2928.6.2.17.1.3.4
·
1 row entry
·
8 columns
Table of 24 hour PM interval history
One entry for each 24 hour PM interval
Indexes
pmDchIndex pmDch24hIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmDch24hIndex
The index that identifies the interval for which the set of
statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.4.1.1 |
||||
|
pmDch24hTime
Time stamp for this 24 hour interval
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2928.6.2.17.1.3.4.1.2 |
||||
|
pmDch24hSuspect
Suspect flag for this 24 hour interval
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.3.4.1.3 |
||||
|
pmDch24hZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.4.1.4 |
||||
|
pmDch24hESs
Number of Errored Seconds (ES) for this 24 hour period.
ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter24h Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.3.4.1.5 |
||||
|
pmDch24hSESs
Number of Severe Errored Seconds (SES) for this 24 hour
period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter24h Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.3.4.1.6 |
||||
|
pmDch24hBBEs
Number of Background Block Error (BBE) for this 24 hour
period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.4.1.7 |
||||
|
pmDch24hUASs
Number of Unavailable Second (UAS) for this 24 hour period.
UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them … |
Counter24h Textual Convention: Counter24h Unsigned32Type Constraints: range: 0..86410 |
.1.3.6.1.4.1.2928.6.2.17.1.3.4.1.8 |
pmDch24hCurrentTable
table.1.3.6.1.4.1.2928.6.2.17.1.3.5
·
1 row entry
·
7 columns
Table of PM data for the current 24 hour period
One entry for each monitored object
Indexes
pmDchIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
pmDch24hCurrentTime
Elapsed time in seconds for the current 24 hour period.
|
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.5.1.2 |
||||
|
pmDch24hCurrentSuspect
Is Suspect flag, if set to `true(1)' the current 24 hour
measurement period has unreliable measurement data. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2928.6.2.17.1.3.5.1.3 |
||||
|
pmDch24hCurrentZS
Zero Suppression Counter.
If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.5.1.4 |
||||
|
pmDch24hCurrentESs
Number of Errored Seconds (ES) for the current 24 hour
period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.5.1.5 |
||||
|
pmDch24hCurrentSESs
Number of Severe Errored Seconds (SES) for the current 24
hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.5.1.6 |
||||
|
pmDch24hCurrentBBEs
Number of Background Block Error (BBE) for the current 24
hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2928.6.2.17.1.3.5.1.7 |
||||
|
pmDch24hCurrentUASs
Number of Unavailable Second (UAS) for the current 24 hour
period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection o… |
Counter15m Textual Convention: Counter15m Unsigned32Type Constraints: range: 0..910 |
.1.3.6.1.4.1.2928.6.2.17.1.3.5.1.8 |