pmDchUatAlarmsEnabled
NETI-PM-MIB ·
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.7
Object
If set to `true(1)' then UAT alarms will be sent.
Unavailable time (UAT) defines a state where a service is
unable to perform its normal task due to severe errors for a
longer period. It begins at detection of ten consecutive SES
events and ends at detection of ten consecutive non-SES
events. In both cases, the 10s are considered part of
unavailable respective available time and effects the
visibility of G.826 PM events (they are delayed 10s)
Entry and exit of UAT is declared by raising and clearing an
UAT alarm (if enabled)
Context
- MIB
- NETI-PM-MIB
- OID
.1.3.6.1.4.1.2928.6.2.17.1.3.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pmDchEntry
- Table
- pmDchTable
- Siblings
- 16
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pmDchIndex The index uniquely identifying this DTM channel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.1 |
| pmDchZeroSuppressionEnabled If set to `true(1)' then Zero Suppression mode is enabled
Zero Suppression mode tells whether intervals with all
current counters equal to zero shall be stored in t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.10 |
| pmDchHistorySize The size of the history log | column | Enumeration | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.11 |
| pmDch15mTresholdES 15 minute threshold value for ES.
Current ES value equal to or above this threshold will raise
a threshold alarm if enabled. A value of zero will disable
threshold … | column | Counter15m | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.12 |
| pmDch15mTresholdSES 15 minute threshold value for SES.
Current SES value equal to or above this threshold will raise
a threshold alarm if enabled. A value of zero will disable
threshol… | column | Counter15m | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.13 |
| pmDch15mTresholdBBE 15 minute threshold value for BBE.
Current BBE value equal to or above this threshold will raise
a threshold alarm if enabled. A value of zero will disable
threshol… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.14 |
| pmDch24hTresholdES 24 hour threshold value for ES.
Current ES value equal to or above this threshold will raise
a threshold alarm if enabled. A value of zero will disable
threshold ch… | column | Counter24h | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.15 |
| pmDch24hTresholdSES 24 hour threshold value for SES.
Current SES value equal to or above this threshold will raise
a threshold alarm if enabled. A value of zero will disable
threshold … | column | Counter24h | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.16 |
| pmDch24hTresholdBBE 24 hour threshold value for BBE.
Current BBE value equal to or above this threshold will raise
a threshold alarm if enabled. A value of zero will disable
threshold … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.17 |
| pmDchAdminStatus The desired state of the PM function. Affects the operative
state of the PM object | column | Enumeration | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.2 |
| pmDchOperStatus PM operative state. | column | Enumeration | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.3 |
| pmDchFailure Shows current failure state. An empty string indicates no
failure | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.4 |
| pmDchDataSource The PM Data Source object | column | ObjectIdentifier | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.5 |
| pmDchDataSourceName The name of the PM Data Source | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.6 |
| pmDchTresholdAlarmsEnabled If set to `true(1)' then threshold alarms will be sent.
Each 15m and 24h current register counter can be assigned a
threshold value. When crossed, a threshold cross… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.8 |
| pmDchPeriodicEventsEnabled If set to `true(1)' then History Periodic Events will be
sent. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.9 |