NETGEAR-POWER-ETHERNET-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
27
agentPethPsePortTable
table.1.3.6.1.4.1.4526.10.15.1.1
·
1 row entry
·
12 columns
A table of per-port information and configuration objects relating to the power status of each port.
A collection of objects providing additional power information
and control parameters for the specified port.
and control parameters for the specified port.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agentPethPowerLimit
The configured maximum power this port can provide to an
attached device measured in Milliwatts. |
MilliwattsSNMPv2-SMIGauge32r/w Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4526.10.15.1.1.1.1 |
||||||||||||||
|
agentPethOutputPower
The power this port is supplying to an attached device measured
in Milliwatts. |
MilliwattsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4526.10.15.1.1.1.2 |
||||||||||||||
|
agentPethOutputCurrent
The current this port is supplying to an attached device measured
in Milliamps. |
MilliampsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4526.10.15.1.1.1.3 |
||||||||||||||
|
agentPethOutputVolts
The voltage this port is supplying to an attached device measured
in Volts. |
VoltsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4526.10.15.1.1.1.4 |
||||||||||||||
|
agentPethTemperature
obsolete
The temperature measured at this port of the PoE Controller. It is
measured in degree celcius. |
DEGREESSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4526.10.15.1.1.1.5 |
||||||||||||||
|
agentPethPowerLimitType
Describes or controls the maximum power that a port can deliver.
A value of dot3af(1) means that the port power limit is as per the dot3af class of the PD attached. A value of user(2) means that the port power limit is … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.4526.10.15.1.1.1.6 |
||||||||||||||
|
agentPethHighPowerEnable
true (1) The PSE port can deliver power up to 32Watts.
false(2) The PSE port can deliver power up to 18Watts |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.4526.10.15.1.1.1.7 |
||||||||||||||
|
agentPethPowerDetectionType
Describes PD detection mechanism performed by the PSE port.
A value of none(0) means no detection is done. A value of legacy(1) means only legacy capacitive detection scheme is used. A value of 4ptdot3afonly(2) means th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.4526.10.15.1.1.1.8 |
||||||||||||||
|
agentPethFaultStatus
Describes the error description when the pse port is in fault status.
A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absenc… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.4526.10.15.1.1.1.9 |
||||||||||||||
|
agentPethPortReset
A value of reset(1) is used to move the pse port dot3af state to idle. A
read on this object will always return the value none(0). The value none(0) can not be forcibly set by the administrtor. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.4526.10.15.1.1.1.10 |
||||||||||||||
|
agentPethPowerLimitMin
The minimum power this port can be configured to provide, measured in Milliwatts.
|
MilliwattsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4526.10.15.1.1.1.11 |
||||||||||||||
|
agentPethPowerLimitMax
The maximum power this port can be configured to provide, measured in Milliwatts.
|
MilliwattsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4526.10.15.1.1.1.12 |
agentPethMainPseTable
table.1.3.6.1.4.1.4526.10.15.1.2.1
·
1 row entry
·
1 columns
A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support these objects. Values of all read-write objects in this table are persistent at restart/reboot.
A set of objects that display and control the Main
power of a PSE.
power of a PSE.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
agentPethMainPseLegacy
Enable/Disable Legacy device detection. The
value true(1) means legacy devices are detected; the value false(2) means legacy devices are not detected. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.4526.10.15.1.2.1.1.1 |
agentPethPseTable
table.1.3.6.1.4.1.4526.10.15.1.3
·
1 row entry
·
2 columns
A table of per-unit information and configuration objects relating to the power configurtion for the entire pse unit.
A collection of objects providing additional power information
and control parameters for the specified pse unit.
and control parameters for the specified pse unit.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
agentPethPsePowerManagementMode
Describes or controls the power management algorithm used by the pse
to deliver power to the requesting PDsthat a pds. A value of dynamic(1) means that power consumption of each port is measured and calculated in real… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.4526.10.15.1.3.1.1 |
||||||
|
agentPethPseThresholdPower
Measured usage power expressed in Watts.
|
WattsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4526.10.15.1.3.1.6 |
agentPethPoeMainPseTable
table.1.3.6.1.4.1.4526.10.15.1.4.1
·
1 row entry
·
12 columns
A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support these objects. Values of all read-write objects in this table are persistent at restart/reboot.
A set of objects that display and control the Main
power of a PSE.
power of a PSE.
Indexes
agentPethPoeMainPseGroupIndex agentPethPoeMainPseSlotIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
agentPethPoeMainPseGroupIndex
This variable uniquely identifies the group to which
power Ethernet PSE is connected. Group means (box in the stack, module in a rack) and the value 1 MUST be used for non-modular devices. Furthermore, the same value … |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.4526.10.15.1.4.1.1.1 |
||||||
|
agentPethPoeMainPseSlotIndex
This variable uniquely identifies the slot in an unit.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.4526.10.15.1.4.1.1.2 |
||||||
|
agentPethPoeMainPsePower
The nominal power of the PSE expressed in Watts.
|
WattsUnsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.4526.10.15.1.4.1.1.3 |
||||||
|
agentPethPoeMainPseOperStatus
The operational status of the main PSE.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.4526.10.15.1.4.1.1.4 |
||||||
|
agentPethPoeMainPseThresholdPower
deprecated
Measured usage power expressed in Watts. This object is deprecated as
per slot Threshold is no longer supported |
WattsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4526.10.15.1.4.1.1.5 |
||||||
|
agentPethPoeMainPseConsumptionPower
Measured usage power expressed in Watts.
|
MilliwattsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4526.10.15.1.4.1.1.6 |
||||||
|
agentPethPoeMainPseUsageThreshold
deprecated
The usage threshold expressed in percents for
comparing the measured power and initiating an alarm if the threshold is exceeded. This object is deprecated as per slot Usage Threshold is no longer supported. |
%Integer32r/w Constraints: range: 1-99 |
.1.3.6.1.4.1.4526.10.15.1.4.1.1.7 |
||||||
|
agentPethPoeMainPseFWImageVersion
Version of the PoE controller's FW image.
|
OctetString Constraints: range: 256-256 |
.1.3.6.1.4.1.4526.10.15.1.4.1.1.8 |
||||||
|
agentPethPoePsePowerManagementMode
Describes or controls the power management algorithm used by the pse
to deliver power to the requesting PDs. A value of dynamic(1) means that power consumption of each port is measured and calculated in real-time. A … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.4526.10.15.1.4.1.1.9 |
||||||
|
agentPethPoePseCardModel
Displays the PoE daughther card model at PSE side.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.4526.10.15.1.4.1.1.10 |
||||||
|
agentPethPoePseCardHost
Displays the board which hosts the PoE daughther card at PSE side.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.4526.10.15.1.4.1.1.11 |
||||||
|
agentPethPoePseCardStatus
Displays running status of the PoE daughther card at PSE side. The value
absent-or-failed(0) means that the card is either not present or some error has occurred. The value running(1) means that card is present and wo… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.4526.10.15.1.4.1.1.12 |