agentPethPoeMainPseUsageThreshold
NETGEAR-POWER-ETHERNET-MIB ·
.1.3.6.1.4.1.4526.10.15.1.4.1.1.7
Object
column
deprecated
r/w
% Integer32
The usage threshold expressed in percents for comparing the measured power and initiating an alarm if the threshold is exceeded. This object is deprecated as per slot Usage Threshold is no longer supported.
Context
- MIB
- NETGEAR-POWER-ETHERNET-MIB
- OID
.1.3.6.1.4.1.4526.10.15.1.4.1.1.7- Type
- column
- Access
- readwrite
- Status
- deprecated
- Units
- %
- Parent
- agentPethPoeMainPseEntry
- Table
- agentPethPoeMainPseTable
- Siblings
- 11
Syntax
% Integer32
Values & Constraints
Object Constraints
range: 1-99
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentPethPoeMainPseGroupIndex This variable uniquely identifies the group to which
power Ethernet PSE is connected. Group means (box in
the stack, module in a rack) and the value 1 MUST be
used for non-modula… | column | Integer32 | .1.3.6.1.4.1.4526.10.15.1.4.1.1.1 |
| agentPethPoePseCardModel Displays the PoE daughther card model at PSE side. | column | OctetString | .1.3.6.1.4.1.4526.10.15.1.4.1.1.10 |
| agentPethPoePseCardHost Displays the board which hosts the PoE daughther card at PSE side. | column | OctetString | .1.3.6.1.4.1.4526.10.15.1.4.1.1.11 |
| agentPethPoePseCardStatus Displays running status of the PoE daughther card at PSE side. The value
absent-or-failed(0) means that the card is either not present or some error
has occurred. The value runn… | column | Enumeration | .1.3.6.1.4.1.4526.10.15.1.4.1.1.12 |
| agentPethPoeMainPseSlotIndex This variable uniquely identifies the slot in an unit. | column | Integer32 | .1.3.6.1.4.1.4526.10.15.1.4.1.1.2 |
| agentPethPoeMainPsePower The nominal power of the PSE expressed in Watts. | column | Watts Unsigned32 | .1.3.6.1.4.1.4526.10.15.1.4.1.1.3 |
| agentPethPoeMainPseOperStatus The operational status of the main PSE. | column | Enumeration | .1.3.6.1.4.1.4526.10.15.1.4.1.1.4 |
| agentPethPoeMainPseThresholdPower deprecated Measured usage power expressed in Watts. This object is deprecated as
per slot Threshold is no longer supported | column | Watts SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4526.10.15.1.4.1.1.5 |
| agentPethPoeMainPseConsumptionPower Measured usage power expressed in Watts. | column | Milliwatts SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4526.10.15.1.4.1.1.6 |
| agentPethPoeMainPseFWImageVersion Version of the PoE controller's FW image. | column | OctetString | .1.3.6.1.4.1.4526.10.15.1.4.1.1.8 |
| agentPethPoePsePowerManagementMode Describes or controls the power management algorithm used by the pse
to deliver power to the requesting PDs. A value of dynamic(1)
means that power consumption of each port is m… | column | Enumeration | .1.3.6.1.4.1.4526.10.15.1.4.1.1.9 |