MX-DHCP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

subnetsTable

table

.0.1900.1.100 · 1 row entry · 7 columns

Open in standard view

Subnets
          
This table configures the subnets of the DHCP server. The
NetworkInterfaceName parameter must match a network interface
that is Up and the EnableSubnet parameter must be set to
'Enable' to properly activate the DHCP server on that interface.
          
The Dhcp.AddSubnet command may be used to add a new subnet to
the SubnetsTable and to all subnet-specific configuration
tables.

subnetsEntry entry .0.1900.1.100.1

A row in table Subnets.

Indexes

subnetsNetworkInterfaceName

Column Syntax OID

subnetsNetworkInterfaceName

Network Interface

Network interface on which the DHCP server is active. That
interface must be up for the DHCP server to become active.

OctetString

.0.1900.1.100.1.100

subnetsEnableSubnet

Enable

Enables the subnet configuration. Activates the DHCP server on
the subnet when enabled.

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.100.1.200

subnetsStartAddress

Start Address

Start address of the subnet range. It MUST be within the
network interface's subnet.

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.100.1.300

subnetsEndAddress

End Address

End address of the subnet range. It MUST be within the network
interface's subnet and higher than or equal to the StartAddress
value.

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.100.1.400

subnetsAutomaticConfigurationInterface

Configuration Interface

The network interface that provides the automatic configuration
(E.g.: DNS servers, NTP server, etc.) to this subnet.

OctetStringr/w

Constraints:
range: 0-50

.0.1900.1.100.1.450

subnetsConfigStatus

Status

Subnet configuration status.

* Disabled: The EnableSubnet parameter is disabled or the
NetworkInterfaceName parameter does not match a network
interface that is Up.
* Inv…

Enumeration

Enumerated Values:

100	disabled
200	invalidConfig
300	ok

.0.1900.1.100.1.500

subnetsDelete

Delete

Deletes a row from the table.

Enumerationr/w

Enumerated Values:

0	noOp
10	delete

.0.1900.1.100.1.600

specificDomainNamesTable

table

.0.1900.1.200.300 · 1 row entry · 5 columns

Open in standard view

Subnet Domain Names
          
This table specifies subnet-specific domain names
configurations. All subnets use the default configuration
unless the SpecificDomainNames.EnableConfig parameter is set
to 'Enable'.
          
The Dhcp.AddSubnet command may be used to add a new subnet to
the SubnetsTable and to all subnet-specific configuration
tables.

specificDomainNamesEntry entry .0.1900.1.200.300.1

A row in table Subnet Domain Names.

Indexes

specificDomainNamesSubnetName

Column Syntax OID

specificDomainNamesSubnetName

Subnet Name

Name of the subnet.

OctetString

.0.1900.1.200.300.1.100

specificDomainNamesEnableConfig

Enable

Defines the domain name configuration to use for this
specific subnet.

* Disable: The subnet uses the default configuration as
defined in the DefaultDomainNameConfigSource and
…

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.200.300.1.200

specificDomainNamesEnableOption

Enable Option

Enables the domain name (option 15).

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.200.300.1.300

specificDomainNamesConfigSource

Configuration Source

Subnet's domain name specific configuration source.

* HostConfiguration: The domain name is obtained from the
host configuration.
* Static: The domain name is s…

Enumerationr/w

Enumerated Values:

200	hostConfiguration
400	static

.0.1900.1.200.300.1.400

specificDomainNamesStaticName

Static Domain Name

Static Domain Name Configuration. The
SpecificDomainNames.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration overrides the de…

MX-TCMxIpHostNamer/w

Textual Convention: MX-TCMxIpHostName OctetString

Type Constraints:
range: 0..255

.0.1900.1.200.300.1.500

domainNamesInfoTable

table

.0.1900.1.200.400 · 1 row entry · 2 columns

Open in standard view

Domain Names Information
          
This table contains the active subnets' domain names.

domainNamesInfoEntry entry .0.1900.1.200.400.1

A row in table Domain Names Information.

Indexes

domainNamesInfoSubnetName

Column	Syntax	OID
domainNamesInfoSubnetName Subnet Name Name of the subnet.	OctetString	`.0.1900.1.200.400.1.100`
domainNamesInfoDomainName Domain Name Indicates the subnet's current domain name.	OctetString	`.0.1900.1.200.400.1.200`

specificLeaseTimesTable

table

.0.1900.1.300.200 · 1 row entry · 3 columns

Open in standard view

Subnet Lease Times
          
This table specifies subnet-specific lease times
configurations. All subnets use the default configuration
unless the SpecificLeaseTimes.EnableConfig parameter is set to
'Enable'.
          
The Dhcp.AddSubnet command may be used to add a new subnet to
the SubnetsTable and to all subnet-specific configuration
tables.

specificLeaseTimesEntry entry .0.1900.1.300.200.1

A row in table Subnet Lease Times.

Indexes

specificLeaseTimesSubnetName

Column Syntax OID

specificLeaseTimesSubnetName

Subnet Name

Name of the subnet.

OctetString

.0.1900.1.300.200.1.100

specificLeaseTimesEnableConfig

Enable

Defines the lease time configuration to use for this specific
subnet.

* Disable: The subnet uses the default configuration as
defined in the DefaultLeaseTime parameter.
* Ena…

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.300.200.1.200

specificLeaseTimesLeaseTime

Lease Time

Specifies the subnet's specific lease time in seconds.

This configuration overrides the default configuration set in
the DefaultLeaseTime parameter when the
SpecificLeaseTimes.En…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.0.1900.1.300.200.1.300

leaseTimesInfoTable

table

.0.1900.1.300.300 · 1 row entry · 2 columns

Open in standard view

Lease Times
          
This table contains the active subnets' lease times.

leaseTimesInfoEntry entry .0.1900.1.300.300.1

A row in table Lease Times.

Indexes

leaseTimesInfoSubnetName

Column	Syntax	OID
leaseTimesInfoSubnetName Subnet Name Name of the subnet.	OctetString	`.0.1900.1.300.300.1.100`
leaseTimesInfoDefault Lease Time Indicates the subnet's current default lease time in seconds.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.0.1900.1.300.300.1.200`

specificDefaultRoutersTable

table

.0.1900.1.400.100 · 1 row entry · 4 columns

Open in standard view

Subnet Default Routers
          
This table specifies subnet-specific default routers
configurations.
          
The Dhcp.AddSubnet command may be used to add a new subnet to
the SubnetsTable and to all subnet-specific configuration
tables.

specificDefaultRoutersEntry entry .0.1900.1.400.100.1

A row in table Subnet Default Routers.

Indexes

specificDefaultRoutersSubnetName

Column Syntax OID

specificDefaultRoutersSubnetName

Subnet Name

Name of the subnet.

OctetString

.0.1900.1.400.100.1.100

specificDefaultRoutersEnableOption

Enable Option

Enables the default router (option 3).

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.400.100.1.200

specificDefaultRoutersConfigSource

Configuration Source

The subnet's specific router configuration source.

* HostInterface: The default router is the host address
within the client's subnet.
* Static: The default rou…

Enumerationr/w

Enumerated Values:

100	hostInterface
400	static

.0.1900.1.400.100.1.300

specificDefaultRoutersStaticRouter

Static Default Router

Specifies the subnet's default router. The
SpecificDefaultRouters.ConfigSource parameter must be set to
'Static' for this value to be applied.

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.400.100.1.400

defaultRoutersInfoTable

table

.0.1900.1.400.200 · 1 row entry · 2 columns

Open in standard view

Default Routers
          
This table contains the active subnets' default routers.

defaultRoutersInfoEntry entry .0.1900.1.400.200.1

A row in table Default Routers.

Indexes

defaultRoutersInfoSubnetName

Column	Syntax	OID
defaultRoutersInfoSubnetName Subnet Name Name of the subnet.	OctetString	`.0.1900.1.400.200.1.100`
defaultRoutersInfoDefaultRouter Default Router Indicates the subnet's current default router.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.400.200.1.200`

defaultStaticDnsServersTable

table

.0.1900.1.500.200 · 1 row entry · 2 columns

Open in standard view

Static DNS Servers
          
This table contains the list of default static DNS servers for
all subnets. The DNS servers are sorted by priority. These DNS
servers are used as the current DNS servers when the Default
DnsServersConfigSource parameter is set to 'Static'.

defaultStaticDnsServersEntry entry .0.1900.1.500.200.1

A row in table Static DNS Servers.

Indexes

defaultStaticDnsServersPriority

Column	Syntax	OID
defaultStaticDnsServersPriority Priority Priority number of this static DNS server. The lower the number is, the higher the priority is.	Unsigned32 Constraints: `range: 1-4`	`.0.1900.1.500.200.1.100`
defaultStaticDnsServersIpAddress IP Address Static DNS server's IP address.	MX-TC2MxIpAddrr/w Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.500.200.1.200`

specificDnsServersTable

table

.0.1900.1.500.300 · 1 row entry · 8 columns

Open in standard view

Subnet DNS Servers
          
This table specifies subnet-specific DNS servers
configurations. All subnets use the default configuration
unless the SpecificDnsServers.EnableConfig parameter is set to
'Enable'.
          
The Dhcp.AddSubnet command may be used to add a new subnet to
the SubnetsTable and to all subnet-specific configuration
tables.

specificDnsServersEntry entry .0.1900.1.500.300.1

A row in table Subnet DNS Servers.

Indexes

specificDnsServersSubnetName

Column Syntax OID

specificDnsServersSubnetName

Subnet Name

Name of the subnet.

OctetString

.0.1900.1.500.300.1.100

specificDnsServersEnableConfig

Enable

Defines the DNS servers configuration to use for this
specific subnet.

* Disable: The subnet uses the default configuration as
defined in the DefaultDnsServersConfigSource and
…

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.500.300.1.200

specificDnsServersEnableOption

Enable Option

Enables the DNS servers (option 6).

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.500.300.1.300

specificDnsServersConfigSource

Configuration Source

DNS servers specific configuration source for the subnet.

* HostConfiguration: The DNS servers are obtained from the
host configuration.
* Automatic: The DNS se…

Enumerationr/w

Enumerated Values:

200	hostConfiguration
300	automatic
400	static

.0.1900.1.500.300.1.400

specificDnsServersStaticDns1

Static DNS 1

IP address of the first DNS server of the subnet. The
SpecificDnsServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration overrid…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.500.300.1.500

specificDnsServersStaticDns2

Static DNS 2

IP address of the second DNS server of the subnet. The
SpecificDnsServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration overri…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.500.300.1.600

specificDnsServersStaticDns3

Static DNS 3

IP address of the third DNS server of the subnet. The
SpecificDnsServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration overrid…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.500.300.1.700

specificDnsServersStaticDns4

Static DNS 4

IP address of the fourth DNS server of the subnet. The
SpecificDnsServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration overri…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.500.300.1.800

dnsServersInfoTable

table

.0.1900.1.500.400 · 1 row entry · 5 columns

Open in standard view

DNS Servers
          
This table contains the active subnets' DNS servers.

dnsServersInfoEntry entry .0.1900.1.500.400.1

A row in table DNS Servers.

Indexes

dnsServersInfoSubnetName

Column	Syntax	OID
dnsServersInfoSubnetName Subnet Name Name of the subnet.	OctetString	`.0.1900.1.500.400.1.100`
dnsServersInfoDns1 DNS 1 Indicates the subnets' first DNS server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.500.400.1.200`
dnsServersInfoDns2 DNS 2 Indicates the subnets' second DNS server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.500.400.1.300`
dnsServersInfoDns3 DNS 3 Indicates the subnets' third DNS server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.500.400.1.400`
dnsServersInfoDns4 DNS 4 Indicates the subnets' fourth DNS server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.500.400.1.500`

defaultStaticNtpServersTable

table

.0.1900.1.600.200 · 1 row entry · 2 columns

Open in standard view

Static NTP Servers
          
This table contains the list of default static NTP servers for
all subnets. The NTP servers are sorted by priority. These NTP
servers are used as the current NTP servers when the
DefaultNtpServersConfigSource parameter is set to 'Static'.

defaultStaticNtpServersEntry entry .0.1900.1.600.200.1

A row in table Static NTP Servers.

Indexes

defaultStaticNtpServersPriority

Column	Syntax	OID
defaultStaticNtpServersPriority Priority Priority number of this static NTP server. The lower the number is, the higher the priority is.	Unsigned32 Constraints: `range: 1-4`	`.0.1900.1.600.200.1.100`
defaultStaticNtpServersIpAddress IP Address NTP server's static IP address.	MX-TC2MxIpAddrr/w Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.600.200.1.200`

specificNtpServersTable

table

.0.1900.1.600.300 · 1 row entry · 8 columns

Open in standard view

Subnet NTP Servers
          
This table specifies subnet-specific NTP servers
configurations. All subnets use the default configuration
unless the SpecificNtpServers.EnableConfig parameter is set to
'Enable'.
          
The Dhcp.AddSubnet command may be used to add a new subnet to
the SubnetsTable and to all subnet-specific configuration
tables.

specificNtpServersEntry entry .0.1900.1.600.300.1

A row in table Subnet NTP Servers.

Indexes

specificNtpServersSubnetName

Column Syntax OID

specificNtpServersSubnetName

Subnet Name

Name of the subnet.

OctetString

.0.1900.1.600.300.1.100

specificNtpServersEnableConfig

Enable

Defines the NTP servers configuration to use for this
specific subnet.

* Disable: The subnet uses the default configuration as
defined in the DefaultNtpServersConfigSource and
…

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.600.300.1.200

specificNtpServersEnableOption

Enable Option

Enables the NTP servers (option 42).

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.600.300.1.300

specificNtpServersConfigSource

Configuration Source

NTP servers specific configuration source for the subnet.

* HostConfiguration: The NTP servers are obtained from the
host configuration.
* Automatic: The NTP se…

Enumerationr/w

Enumerated Values:

200	hostConfiguration
300	automatic
400	static

.0.1900.1.600.300.1.400

specificNtpServersStaticNtp1

Static NTP 1

IP address of the first NTP server of the subnet. The
SpecificNtpServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration overrid…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.600.300.1.500

specificNtpServersStaticNtp2

Static NTP 2

IP address of the second NTP server of the subnet. The
SpecificNtpServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration overri…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.600.300.1.600

specificNtpServersStaticNtp3

Static NTP 3

IP address of the third NTP server of the subnet. The
SpecificNtpServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration overrid…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.600.300.1.700

specificNtpServersStaticNtp4

Static NTP 4

IP address of the fourth NTP server of the subnet. The
SpecificNtpServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration overri…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.600.300.1.800

ntpServersInfoTable

table

.0.1900.1.600.400 · 1 row entry · 5 columns

Open in standard view

NTP Servers
          
This table contains the active subnets's NTP servers.

ntpServersInfoEntry entry .0.1900.1.600.400.1

A row in table NTP Servers.

Indexes

ntpServersInfoSubnetName

Column	Syntax	OID
ntpServersInfoSubnetName Subnet Name Name of the subnet.	OctetString	`.0.1900.1.600.400.1.100`
ntpServersInfoNtp1 NTP 1 Indicates the subnets' first NTP server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.600.400.1.200`
ntpServersInfoNtp2 NTP 2 Indicates the subnets' second NTP server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.600.400.1.300`
ntpServersInfoNtp3 NTP 3 Indicates the subnets' third NTP server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.600.400.1.400`
ntpServersInfoNtp4 NTP 4 Indicates the subnets' fourth NTP server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.600.400.1.500`

defaultStaticNbnsServersTable

table

.0.1900.1.700.100 · 1 row entry · 2 columns

Open in standard view

Static NBNS Servers
          
This table contains the list of default static NBNS servers
for all subnets. The NBNS servers are sorted by priority.

defaultStaticNbnsServersEntry entry .0.1900.1.700.100.1

A row in table Static NBNS Servers.

Indexes

defaultStaticNbnsServersPriority

Column	Syntax	OID
defaultStaticNbnsServersPriority Priority Priority number of this static NBNS server. The lower the number is, the higher the priority is.	Unsigned32 Constraints: `range: 1-4`	`.0.1900.1.700.100.1.100`
defaultStaticNbnsServersIpAddress IP Address NBNS server's static IP address.	MX-TC2MxIpAddrr/w Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.700.100.1.200`

specificNbnsServersTable

table

.0.1900.1.700.200 · 1 row entry · 7 columns

Open in standard view

Subnet NBNS Servers
          
This table specifies subnet-specific NBNS servers
configurations. All subnets use the default configuration
unless the SpecificNbnsServers.EnableConfig parameter is set
to 'Enable'.
          
The Dhcp.AddSubnet command may be used to add a new subnet to
the SubnetsTable and to all subnet-specific configuration
tables.

specificNbnsServersEntry entry .0.1900.1.700.200.1

A row in table Subnet NBNS Servers.

Indexes

specificNbnsServersSubnetName

Column Syntax OID

specificNbnsServersSubnetName

Subnet Name

Name of the subnet.

OctetString

.0.1900.1.700.200.1.100

specificNbnsServersEnableConfig

Enable

Defines the NBNS servers configuration to use for this
specific subnet.

* Disable: The subnet uses the default configuration as
defined in the DefaultStaticNbnsServers.IpAddres…

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.700.200.1.200

specificNbnsServersEnableOption

Enable Option

Enables the NBNS servers (option 44).

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.700.200.1.300

specificNbnsServersStaticNbns1

Static NBNS 1

IP address of the first NBNS server of the subnet. The
SpecificNbnsServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration over…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.700.200.1.400

specificNbnsServersStaticNbns2

Static NBNS 2

IP address of the second NBNS server of the subnet. The
SpecificNbnsServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration ove…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.700.200.1.500

specificNbnsServersStaticNbns3

Static NBNS 3

IP address of the third NBNS server of the subnet. The
SpecificNbnsServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration over…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.700.200.1.600

specificNbnsServersStaticNbns4

Static NBNS 4

IP address of the fourth NBNS server of the subnet. The
SpecificNbnsServers.ConfigSource parameter must be set to
'Static' for this value to be applied.

This configuration ove…

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.700.200.1.700

nbnsServersInfoTable

table

.0.1900.1.700.300 · 1 row entry · 5 columns

Open in standard view

NBNS Servers
          
This table contains the active subnets' NBNS servers.

nbnsServersInfoEntry entry .0.1900.1.700.300.1

A row in table NBNS Servers.

Indexes

nbnsServersInfoSubnetName

Column	Syntax	OID
nbnsServersInfoSubnetName Subnet Name Name of the subnet.	OctetString	`.0.1900.1.700.300.1.100`
nbnsServersInfoNbns1 NBNS 1 Indicates the subnets' first NBNS server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.700.300.1.200`
nbnsServersInfoNbns2 NBNS 2 Indicates the subnets' second NBNS server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.700.300.1.300`
nbnsServersInfoNbns3 NBNS 3 Indicates the subnets' third NBNS server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.700.300.1.400`
nbnsServersInfoNbns4 NBNS 4 Indicates the subnets' fourth NBNS server.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.700.300.1.500`

staticLeasesTable

table

.0.1900.1.800 · 1 row entry · 3 columns

Open in standard view

Static Leases
          
This table specifies IP addresses that are reserved for specific
hosts.

staticLeasesEntry entry .0.1900.1.800.1

A row in table Static Leases.

Indexes

staticLeasesMacAddress

Column Syntax OID

staticLeasesMacAddress

MAC Address

MAC address of the host.

OctetString

.0.1900.1.800.1.100

staticLeasesIpAddress

IP Address

The reserved IP address of the host.

MX-TC2MxIpAddrr/w

Textual Convention: MX-TC2MxIpAddr OctetString

Type Constraints:
range: 0..15

.0.1900.1.800.1.200

staticLeasesDelete

Delete

Deletes a static lease from the table.

Enumerationr/w

Enumerated Values:

0	noOp
10	delete

.0.1900.1.800.1.300

assignedLeasesInfoTable

table

.0.1900.1.900 · 1 row entry · 4 columns

Open in standard view

Assigned Leases
          
This table lists the IP addresses that are currently assigned.

assignedLeasesInfoEntry entry .0.1900.1.900.1

A row in table Assigned Leases.

Indexes

assignedLeasesInfoIpAddress

Column	Syntax	OID
assignedLeasesInfoIpAddress IP Address IP Address of the host.	MX-TC2MxIpAddr Textual Convention: MX-TC2MxIpAddr `OctetString` Type Constraints: `range: 0..15`	`.0.1900.1.900.1.100`
assignedLeasesInfoMacAddress MAC Address MAC address of the host.	OctetString	`.0.1900.1.900.1.200`
assignedLeasesInfoSubnetName Subnet Name Indicates on which subnet the host is located.	OctetString	`.0.1900.1.900.1.300`
assignedLeasesInfoLeaseTimeLeft Lease Time Left Indicates the lease time left in seconds.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.0.1900.1.900.1.400`

specificOption66Table

table

.0.1900.1.1000.1000 · 1 row entry · 4 columns

Open in standard view

Specific Option 66
          
This table contains the Option 66 for each subnet.

specificOption66Entry entry .0.1900.1.1000.1000.1

A row in table Specific Option 66.

Indexes

specificOption66SubnetName

Column Syntax OID

specificOption66SubnetName

Subnet Name

Name of the subnet.

OctetString

.0.1900.1.1000.1000.1.100

specificOption66EnableConfig

Enable

Defines the Option 66 configuration to use for this specific
subnet.

* Disable: The subnet uses the default configuration as
defined in the DefaultStaticOption66 parameter.
*…

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.1000.1000.1.200

specificOption66EnableOption

Enable Option

Enables the option 66 on this subnet.

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.1000.1000.1.300

specificOption66Value

Value

Subnet's Option 66 specific value.

This configuration overrides the default configuration set in
the DefaultStaticOption66 parameter when the
SpecificOption66.EnableConfig parameter i…

OctetStringr/w

Constraints:
range: 0-120

.0.1900.1.1000.1000.1.400

specificOption67Table

table

.0.1900.1.1000.1100 · 1 row entry · 4 columns

Open in standard view

Specific Option 67
          
This table contains the Option 67 for each subnet. When empty,
option 67 is not sent.

specificOption67Entry entry .0.1900.1.1000.1100.1

A row in table Specific Option 67.

Indexes

specificOption67SubnetName

Column Syntax OID

specificOption67SubnetName

Subnet Name

Name of the subnet.

OctetString

.0.1900.1.1000.1100.1.100

specificOption67EnableConfig

Enable

Defines the Option 67 configuration to use for this specific
subnet.

* Disable: The subnet uses the default configuration as
defined in the DefaultStaticOption67 parameter.
*…

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.1000.1100.1.200

specificOption67EnableOption

Enable Option

Enables the option 67 on this subnet.

MX-TCMxEnableStater/w

Textual Convention: MX-TCMxEnableState Enumeration

Type Values:

0	disable
1	enable

.0.1900.1.1000.1100.1.300

specificOption67Value

Value

Subnet's Option 67 specific value.

This configuration overrides the default configuration set in
the DefaultStaticOption67 parameter when the
SpecificOption67.EnableConfig parameter i…

OctetStringr/w

Constraints:
range: 0-120

.0.1900.1.1000.1100.1.400

subnetsStatsTable

table

.0.1900.1.10000.100 · 1 row entry · 2 columns

Open in standard view

Statistics
          
This table contains the statistics for each
subnet.

subnetsStatsEntry entry .0.1900.1.10000.100.1

A row in table Statistics.

Indexes

subnetsStatsSubnetName

Column	Syntax	OID
subnetsStatsSubnetName Subnet Name Name of the subnet.	OctetString	`.0.1900.1.10000.100.1.100`
subnetsStatsNumberOfLeases Number of Leases Number of currently assigned leases.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.0.1900.1.10000.100.1.200`