MPOA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

175

deviceTypeTable

table

.1.3.6.1.4.1.353.5.8.1.1.1.1 · 1 row entry · 6 columns

Open in standard view

The device type table
represents the mapping of the Lane Data ATM address
to the MAC device capability.
The unique key is the Lane data ATM address and Lec Index
of the LEC associated with the MAC addresses.
This table contains information which was
gathered from its environment about neighboring
machines.
This Device type table represents the information of
other/remote MPOA devices, discovered/gathered by each MPOA
device. This MIB is not the device type of MPS/MPC
itself; it is DISCOVERED information.

deviceTypeEntry entry .1.3.6.1.4.1.353.5.8.1.1.1.1.1

An entry in this table and corresponding entries in the
deviceTypeMpsMacAddressTable represent a mapping of a MAC device
capability (i.e. the set of MAC addresses from a device) to the
LEC ATM Address.

Indexes

deviceTypeIndex

Column Syntax OID

deviceTypeIndex

Index into this table and also used as one of the indices for
the deviceTypeMpsMacAddressTable. This index has local
significance within the mpoaDeviceGroup.
Entries in the `deviceTypeMpsMacAddressTable' which correspo…

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.353.5.8.1.1.1.1.1.1

deviceTypeLecIndex

LecIndex of LEC that supports this
data ATM address

LecIndex

Textual Convention: LecIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.353.5.8.1.1.1.1.1.2

deviceTypeRemoteLecAtmAddress

The ATM address learned by LE ARP.

AtmAddr

Textual Convention: AtmAddr OctetString

Type Constraints:
range: 0
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.1.1.1.3

deviceTypeType

same as the TLV

Enumeration

Enumerated Values:

1	nonMpoa
2	mps
3	mpc
4	mpsAndMpc

.1.3.6.1.4.1.353.5.8.1.1.1.1.1.4

deviceTypeMpsAtmAddress

Associated MPS address, zeros for non-MPOA and mpc

AtmAddr

Textual Convention: AtmAddr OctetString

Type Constraints:
range: 0
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.1.1.1.5

deviceTypeMpcAtmAddress

Associated MPC address, zeros for non-MPOA & mps

AtmAddr

Textual Convention: AtmAddr OctetString

Type Constraints:
range: 0
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.1.1.1.6

deviceTypeMpsMacAddressTable

table

.1.3.6.1.4.1.353.5.8.1.1.1.2 · 1 row entry · 1 columns

Open in standard view

This table contains MPS MAC Address information gathered from
the MPOA DeviceTypeTLV.

deviceTypeMpsMacAddressEntry entry .1.3.6.1.4.1.353.5.8.1.1.1.2.1

Each entry represents an MPS MAC Address. Each entry
corresponds to a deviceTypeIndex value for which the
deviceTypeType attribute is `mps' or `mpsAndMpc'.

Indexes

deviceTypeIndex deviceTypeMpsMacAddress

Column	Syntax	OID
deviceTypeMpsMacAddress MPS MAC address contained in the Device Type TLV which is identified by the deviceTypeIndex in the deviceTypeTable.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.353.5.8.1.1.1.2.1.1`

mpcConfigTable

table

.1.3.6.1.4.1.353.5.8.1.1.2.2 · 1 row entry · 9 columns

Open in standard view

The MPOA Client Configuration Table.
This table contains configuration information
for all MPOA Clients which this agent manages.

mpcConfigEntry entry .1.3.6.1.4.1.353.5.8.1.1.2.2.1

MPOA Client Configuration Entry.
Each entry contains configuration information
for one MPOA Client. The configuration information, including
the mpcIndex, must be restored after a re-initialization of an
MPC or a re-in…

Indexes

mpcIndex

Column Syntax OID

mpcIndex

A value which uniquely identifies this conceptual
row in the mpcConfigTable. The `mpcNextIndex' object
needs to be used to determine the value of this object.
A row cannot be added, unless the mpcCtrlAtmAddress is uniq…

MpcIndex

Textual Convention: MpcIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.2.1.1

mpcRowStatus

This object allows creation and deletion of
MPOA Clients.

Within each conceptual mpcConfigTable row, writable objects
may be modified, regardless of the value of mpcRowStatus.
It is not necessary to set a…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.353.5.8.1.1.2.2.1.2

mpcConfigMode

Indicates whether this MPC should auto-configure
the next time it is (re-)initialized.
During the (re-)initialization of this MPC, if
the mode is automatic(1), the LECS is contacted and
requests are made for all MPC-p* …

Enumerationr/w

Enumerated Values:

1	automatic
2	manual

.1.3.6.1.4.1.353.5.8.1.1.2.2.1.3

mpcCtrlAtmAddr

The MPC's Control ATM Address. There exists one
Control ATM Address per MPC, therefore, the value
of this entry is unique within the table. The control ATM
Address is the address which is used by the MPC in its reques…

AtmConfigAddrr/w

Textual Convention: AtmConfigAddr OctetString

Type Constraints:
range: 1
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.2.2.1.4

mpcSCSetupFrameCount

This represents the MPC-p1 Short-cut setup frame count
parameter.

The MPC-p1 value is frames measured over mpcSCFrameTime seconds.
Flow detection is protocol independent. i.e. all network layers
mpcProtoc…

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.353.5.8.1.1.2.2.1.5

mpcSCSetupFrameTime

MPC-p2 Short-cut setup frame time, in seconds.

Integer32r/w

Constraints:
range: 1-60

.1.3.6.1.4.1.353.5.8.1.1.2.2.1.6

mpcInitialRetryTime

MPC-p4 is the initial value for the retry time out
period used for timing out MPOA Resolution Requests
in seconds. Retry time consists of this initial
time-out (MPC-p4) and a retry multiplier (MPC-c1).
If a response is…

Integer32r/w

Constraints:
range: 1-300

.1.3.6.1.4.1.353.5.8.1.1.2.2.1.7

mpcRetryTimeMaximum

MPC-p5 cumulative max value for Retry Time (MPC-p4).
Retries are attempted at intervals determined by the
algorithm described in the definition of mpcIntialRetryTime.

Integer32r/w

Constraints:
range: 10-300

.1.3.6.1.4.1.353.5.8.1.1.2.2.1.8

mpcHoldDownTime

MPC-p6 Hold Down Time
Minimum time to wait before reinitiating
a failed resolution attempt. Default is
mpcRetryTimeMaximum * 4.

Integer32r/w

Constraints:
range: 30-1200

.1.3.6.1.4.1.353.5.8.1.1.2.2.1.9

mpcActualTable

table

.1.3.6.1.4.1.353.5.8.1.1.2.3 · 1 row entry · 8 columns

Open in standard view

MPOA Client Actual Table.
A read-only table which contains state
information and reflects the actual values which
these MPOA Clients are using.  The actual
values may differ from the configured values.
For example, the mpcConfigMode takes affect
only during (re-)initialization of the MPC.
The MPC-p1 to MPC-p6 parameters may differ
from the configured values because, if the
MPC was (re-)initialized and the mpcConfigMode
was set to automatic (1) then some, perhaps all,
of the MPC-p1 to MPC-p6 parameters were retrieved
from the LECS and the values from the LECS may
differ from the configured/default values of the
mpcConfigTable.  NOTE:  after re-initialization
a set to an object in the mpcConfigTable which
changes the value of the object will be reflect
in this Table, except for a set to the
mpcConfigMode which takes effect only during
re-initialization.

mpcActualEntry entry .1.3.6.1.4.1.353.5.8.1.1.2.3.1

An entry in the MPC Actual Table.
An entry represents a specific MPOA Client's
state information and the actual values
which are being used by the MPOA Client.
For example, the corresponding mpcConfigEntry contains
defa…

Indexes

No indexes recorded

Column Syntax OID

mpcActualState

This object indicates the actual state
of the MPOA Client.

Enumeration

Enumerated Values:

1	unknown
2	initialState
3	up
4	down

.1.3.6.1.4.1.353.5.8.1.1.2.3.1.1

mpcDiscontinuityTime

The value of sysUpTime on the most recent occasion at
which any one or more of this MPC's counters
experienced a discontinuity. The relevant counters
are the specific instances associated with this
MPC. If discontinui…

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.353.5.8.1.1.2.3.1.2

mpcActualConfigMode

Indicates whether this MPC auto-configured
when it was last (re-)initialized.

Enumeration

Enumerated Values:

1	automatic
2	manual

.1.3.6.1.4.1.353.5.8.1.1.2.3.1.3

mpcActualSCSetupFrameCount

MPC-p1 Short-cut setup frame count.
In frames measured over mpcShortcutFrameTime seconds.
Flow detection is protocol independent. i.e. all
network layers mpcProtocolEntry share the flow rate
specification.
A value of 1 …

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.353.5.8.1.1.2.3.1.4

mpcActualSCSetupFrameTime

Actual MPC-p2 Short-cut setup frame time, in seconds.

Integer32

Constraints:
range: 1-60

.1.3.6.1.4.1.353.5.8.1.1.2.3.1.5

mpcActualInitialRetryTime

Actual MPC-p4 is initial value for the
retry time out.

Integer32

Constraints:
range: 1-300

.1.3.6.1.4.1.353.5.8.1.1.2.3.1.6

mpcActualRetryTimeMaximum

MPC-p5 cumulative maximum value for Retry Time (MPC-p4).
Retries are attempted at intervals determined by the
algorithm described in the definition of
mpcActualInitialRetryTime.

Integer32

Constraints:
range: 30-300

.1.3.6.1.4.1.353.5.8.1.1.2.3.1.7

mpcActualHoldDownTime

MPC-p6 Hold Down Time
Minimum time to wait before reinitiating a failed
resolution attempt. The default value is
mpcRetryTimeMaximum * 4.

Integer32

Constraints:
range: 30-1200

.1.3.6.1.4.1.353.5.8.1.1.2.3.1.8

mpcDataAtmAddressTable

table

.1.3.6.1.4.1.353.5.8.1.1.2.4 · 1 row entry · 2 columns

Open in standard view

A table which shows all the data ATM addresses
associated with  all MPOA Clients.

mpcDataAtmAddressEntry entry .1.3.6.1.4.1.353.5.8.1.1.2.4.1

Each row defines one data ATM address associated with
an MPC. NOTE: if an MPC has more than one data ATM
address then there will be another entry which contains
the same mpcIndex subIdentifier, with a different
mpcDat…

Indexes

mpcIndex mpcDataAtmAddress

Column Syntax OID

mpcDataAtmAddress

A data ATM Address which is associated with
an MPOA Client specified by the mpcIndex.

AtmAddr

Textual Convention: AtmAddr OctetString

Type Constraints:
range: 0
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.2.4.1.1

mpcDataAtmAddressRowStatus

This object allows creation and deletion of
an MPOA Client's Data ATM Addresses. The
row can be created/deleted by either an NMS
or by the SNMP agent.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.353.5.8.1.1.2.4.1.2

mpcStatisticsTable

table

.1.3.6.1.4.1.353.5.8.1.1.2.5 · 1 row entry · 33 columns

Open in standard view

A read-only table which contains statistical
information for all MPOA Clients that
this agent manages.

mpcStatisticsEntry entry .1.3.6.1.4.1.353.5.8.1.1.2.5.1

Each row in this table contains statistics
for one MPOA Client.

Indexes

No indexes recorded

Column	Syntax	OID
mpcStatTxMpoaResolveRequests The number of MPOA Resolve Requests transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.1`
mpcStatRxMpoaResolveReplyAcks The number of positively acknowledged MPC Resolved Replies received by this MPC with an MPOA CIE Code of 0x00 (Success). Discontinuities in the value of this counter can occur at re-initialization of the management syst…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.2`
mpcStatRxMpoaResolveReplyInsufECResources The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x81, `Insufficient resources to accept egress cache entry'. Discontinuities in the value of this counter can occur at re-initialization of the man…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.3`
mpcStatRxMpoaResolveReplyInsufSCResources The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x82, `Insufficient resources to accept the shortcut'. Discontinuities in the value of this counter can occur at re-initialization of the managemen…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.4`
mpcStatRxMpoaResolveReplyInsufEitherResources The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x83, `Insufficient resources to accept either shortcut or egress cache entry'. Discontinuities in the value of this counter can occur at re-initia…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.5`
mpcStatRxMpoaResolveReplyUnsupportedInetProt The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x84, `Unsupported Internework Layer protocol'. Discontinuities in the value of this counter can occur at re-initialization of the management syste…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.6`
mpcStatRxMpoaResolveReplyUnsupportedMacEncaps The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x85, `Unsupported MAC layer encapsulation'. Discontinuities in the value of this counter can occur at re-initialization of the management system, …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.7`
mpcStatRxMpoaResolveReplyUnspecifiedOther The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x88, `Unspecified/Other'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initiali…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.8`
mpcStatRxMpoaImpRequests The number of MPOA Cache Imposition Requests received by this MPC. Discontinuities in the value of this counter can occur at re- initialization of the management system, and/or re-initialization of the MPC, and at other…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.9`
mpcStatTxMpoaImpReplyAcks The number of successful MPOA Cache Imposition replies transmitted by this MPC with an MPOA CIE Code of 0x00 `Success'. Discontinuities in the value of this counter can occur at re- initialization of the management syst…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.10`
mpcStatTxMpoaImpReplyInsufECResources The number of MPOA Cache Imposition Replies transmitted with an MPOA CIE Code of 0x81, `Insufficient resources to accept egress cache entry'. Discontinuities in the value of this counter can occur at re-initialization o…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.11`
mpcStatTxMpoaImpReplyInsufSCResources The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x82, `Insufficient resources to accept shortcut'. Discontinuities in the value of this counter can occur at re-initialization of the management…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.12`
mpcStatTxMpoaImpReplyInsufEitherResources The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x83, `Insufficient resources to accept either shortcut or egress cache entry'. Discontinuities in the value of this counter can occur at re-ini…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.13`
mpcStatTxMpoaImpReplyUnsupportedInetProt The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x84, `Unsupported Internetwork Layer protocol'. Discontinuities in the value of this counter can occur at re-initialization of the management s…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.14`
mpcStatTxMpoaImpReplyUnsupportedMacEncaps The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x85, `Unsupported MAC Layer encapsulation'. Discontinuities in the value of this counter can occur at re-initialization of the management syste…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.15`
mpcStatTxMpoaImpReplyUnspecifiedOther The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x88, `Unspecified/Other'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initi…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.16`
mpcStatTxMpoaEgressCachePurgeRequests The number of MPOA Egress Cache Purge Requests transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at o…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.17`
mpcStatRxMpoaEgressCachePurgeReplies The number of MPOA Egress Cache Purge Replies received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.18`
mpcStatRxMpoaKeepAlives The number of MPOA Keep Alive messages received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times,…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.19`
mpcStatRxMpoaTriggers The number of MPOA Trigger messages received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.20`
mpcStatRxMpoaDataPlanePurges The number of MPOA Data Plane Purge messages received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.21`
mpcStatTxMpoaDataPlanePurges The number of MPOA Data Plane Purge messages transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at oth…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.22`
mpcStatRxNhrpPurgeRequests The number of Purge Requests received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indica…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.23`
mpcStatTxNhrpPurgeReplies The number of Purge Replies transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indi…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.24`
mpcStatRxErrUnrecognizedExtensions The number of Error Indication packets received by this MPC with the error code `Unrecognized Extension'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-i…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.25`
mpcStatRxErrLoopDetecteds The number of Error Indication packets received by this MPC with the error code `Loop Detected'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initializa…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.26`
mpcStatRxErrProtoAddrUnreachables The number of Error Indication packets received by this MPC with the error code `Protocol Address Unreachable'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/o…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.27`
mpcStatRxErrProtoErrors The number of Error Indication packets received by this MPC with the error code `Protocol Errors'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initiali…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.28`
mpcStatRxErrSduSizeExceededs The number of Error Indication packets received by this MPC with the error code `SDU Size Exceeded'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initia…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.29`
mpcStatRxErrInvalidExtensions The number of Error Indication packets received by this MPC with the error code `Invalid Extensions'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initi…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.30`
mpcStatRxErrInvalidReplies The number of Error Indication packets received by this MPC with the error code `Invalid Reply'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initializa…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.31`
mpcStatRxErrAuthenticationFailures The number of Error Indication packets received by this MPC with the error code `Authentication Failure'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-i…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.32`
mpcStatRxErrHopCountExceededs The number of Error Indication packets received by this MPC with the error code `Hop Count Exceeded'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initi…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.2.5.1.33`

mpcProtocolTable

table

.1.3.6.1.4.1.353.5.8.1.1.2.6 · 1 row entry · 3 columns

Open in standard view

List of protocols, per MPC, for which flow
detection is enabled

mpcProtocolEntry entry .1.3.6.1.4.1.353.5.8.1.1.2.6.1

Each row indicates one protocol for which an MPC will
do flow detection. If the LECS was contacted for
configuration information, and the Control Octet of
the MPC-p3 has the value of 0x01, `Enable', then protocol
value…

Indexes

mpcIndex mpcFlowDetectProtocol

Column Syntax OID

mpcFlowDetectProtocol

The protocol on which flow detection is performed.
If this value was obtained from the LECS then this
value is one of the collection of values returned
in the MPC-p3 parameter.

InternetworkAddrType

Textual Convention: InternetworkAddrType Enumeration

Type Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	ieee802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164WithNsap

.1.3.6.1.4.1.353.5.8.1.1.2.6.1.1

mpcLECSValue

This object reflects if the current entry is due to
a retrieval from the LECS or not. If this entry is
due to the LECS, then true(1) is the value for this
object, otherwise, false (2).

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.353.5.8.1.1.2.6.1.2

mpcProtocolRowStatus

This object is used by an agent or manager to
create, delete or modify a row in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.353.5.8.1.1.2.6.1.3

mpcMappingTable

table

.1.3.6.1.4.1.353.5.8.1.1.2.7 · 1 row entry · 2 columns

Open in standard view

A table mapping the `lecIndex' values of
LANE Clients to the `mpcIndex' values of
corresponding MPOA Clients.

mpcMappingEntry entry .1.3.6.1.4.1.353.5.8.1.1.2.7.1

Each row defines one lecIndex --> mpcIndex mapping.
The mpcIndex that a lecIndex maps to is not
necessarily unique (an MPC can serve many LECs, however,
a LEC cannot be served by more than one MPC).

Indexes

LAN-EMULATION-CLIENT-MIBlecIndex

Column Syntax OID

mpcMappingRowStatus

This object is used by an agent or manager to create, delete
or modify a row in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.353.5.8.1.1.2.7.1.1

mpcMappingIndex

The mpcIndex of the MPOA Client that is performing
flow detection for the LANE Client represented by
the lecIndex.

MpcIndexr/w

Textual Convention: MpcIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.7.1.2

mpcMpsTable

table

.1.3.6.1.4.1.353.5.8.1.1.2.8 · 1 row entry · 2 columns

Open in standard view

This is a read-only table which contains
information about the MPSs that these MPCs
know about.

mpcMpsEntry entry .1.3.6.1.4.1.353.5.8.1.1.2.8.1

A row created by an MPC. The MPC learns about
an MPS and creates a row.

Indexes

mpcMpsIndex

Column	Syntax	OID
mpcMpsIndex The MPS's index which is used to identify a row in this table.	MpsIndex Textual Convention: MpsIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.353.5.8.1.1.2.8.1.1`
mpcMpsAtmAddr The Control ATM Address of the MPS	AtmAddr Textual Convention: AtmAddr `OctetString` Type Constraints: `range: 0` `range: 8` `range: 20`	`.1.3.6.1.4.1.353.5.8.1.1.2.8.1.2`

mpcMpsMacAddressTable

table obsolete

.1.3.6.1.4.1.353.5.8.1.1.2.9 · 1 row entry · 2 columns

Open in standard view

This is a read-only table which contains
information about all the MPSs' MAC Addresses
that these MPCs know about.

mpcMpsMacAddressEntry entry .1.3.6.1.4.1.353.5.8.1.1.2.9.1

A row is created by an MPC. The MPC learns about an
MPS's MAC Address and creates a row.

Indexes

mpcMpsIndex mpcLecIndex

Column	Syntax	OID
mpcLecIndex obsolete The lecIndex which represents the associated LEC.	LecIndex Textual Convention: LecIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.353.5.8.1.1.2.9.1.1`
mpcMpsMacAddress obsolete The MAC Address of the MPS.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.353.5.8.1.1.2.9.1.2`

mpcIngressCacheTable

table

.1.3.6.1.4.1.353.5.8.1.1.2.12 · 1 row entry · 14 columns

Open in standard view

This table contains information for MPC Caches for
the ingress MPC.

mpcIngressCacheEntry entry .1.3.6.1.4.1.353.5.8.1.1.2.12.1

An entry contains control information
for a row in a MPC's Ingress Cache.

Indexes

mpcIngressCacheDestInetworkAddrType mpcIngressCacheDestAddr mpcIndex mpcMpsIndex

Column Syntax OID

mpcIngressCacheDestInetworkAddrType

The type of the destination internetwork layer address.

InternetworkAddrType

Textual Convention: InternetworkAddrType Enumeration

Type Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	ieee802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164WithNsap

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.1

mpcIngressCacheDestAddr

The destination internetwork layer address for which
this entry is defined.

InternetworkAddr

Textual Convention: InternetworkAddr OctetString

Type Constraints:
range: 0..60

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.2

mpcIngressCachePrefixLen

Defines an equivalence class of addresses that match
Prefix Length bit positions of the destination
internetwork layer address.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.3

mpcIngressCacheDestAtmAddr

The Destination ATM Address received in the MPOA
Resolution Reply.

AtmAddr

Textual Convention: AtmAddr OctetString

Type Constraints:
range: 0
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.4

mpcIngressCacheSrcAtmAddr

The Source ATM Address for the MPOA Resolution Request.

AtmAddr

Textual Convention: AtmAddr OctetString

Type Constraints:
range: 0
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.5

mpcIngressCacheEntryState

The present state of this MPC ingress cache.
The states are:
doesNotExist (1) -- the state is not yet available
inactive (2) -- state exists, entry is not yet
active. For an example, if
…

Enumeration

Enumerated Values:

1	doesNotExist
2	inactive
3	active
4	negative

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.6

mpcIngressCacheEgressCacheTagValid

If the value of this object is true(1), then a valid
Egress Cache Tag is present and the value of the Egress
Cache Tag is in mpcIngressCacheEgressCacheTag. Otherwise,
if this value is false(2), then there was no Egress…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.7

mpcIngressCacheEgressCacheTag

If a valid Egress Cache Tag is present, then this
object contains the value of that tag. To determine
if this object contains a valid value,
mpcIngressCacheEgressTagValid should be used.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.8

mpcIngressCacheLastNhrpCieCode

The last NHRP CIE code received for this entry. This
value is valid only during the Hold Down period of the
cache entry. This value is undefined otherwise.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.9

mpcIngressCacheSigErrCode

Error code or Success of the last sinalling request
for this cache entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.10

mpcIngressCacheRetries

The current number of times this MPC has issued a
resolution request since it received a valid reply.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.11

mpcIngressCacheTimeUntilNextResolutionRequest

The amount of time the MPC
must wait before issuing the next resolution request.

SNMPv2-TCTimeInterval

Textual Convention: SNMPv2-TCTimeInterval Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.12

mpcIngressCacheHoldingTime

The time that this MPC's Ingress Cache Entry will remain
valid. If the mpcIngressCacheEntryState is not active
this value will be zero.

SNMPv2-TCTimeInterval

Textual Convention: SNMPv2-TCTimeInterval Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.13

mpcIngressCacheServiceCategory

The service categories supported for this shortcut.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.353.5.8.1.1.2.12.1.14

mpcEgressCacheTable

table

.1.3.6.1.4.1.353.5.8.1.1.2.15 · 1 row entry · 12 columns

Open in standard view

This table contains Egress Cache information for
all the MPCs which this agent manages.

mpcEgressCacheEntry entry .1.3.6.1.4.1.353.5.8.1.1.2.15.1

An entry in the MPOA Client's Egress Cache table.

Indexes

mpcEgressCacheId mpcIndex mpcMpsIndex

Column Syntax OID

mpcEgressCacheId

Cache ID Provided by the MPS in the Cache
Imposition Request.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.1

mpcEgressCacheInetworkAddrType

Type of Internetwork Address in this cache entry.

InternetworkAddrType

Textual Convention: InternetworkAddrType Enumeration

Type Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	ieee802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164WithNsap

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.2

mpcEgressCacheIDestAddr

The destination internetwork layer address
for which this entry is defined.

InternetworkAddr

Textual Convention: InternetworkAddr OctetString

Type Constraints:
range: 0..60

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.3

mpcEgressCachePrefixLen

Defines an equivalence class of addresses that match
Prefix Length bit positions of the destination
internetwork layer address.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.4

mpcEgressCacheEntryState

The present state of this MPC egress cache entry.
The states are:
doesNotExist (1) -- the state is not yet available,
inactive (2) -- state exists, entry is not yet active,
active (3) -- state exists, e…

Enumeration

Enumerated Values:

1	doesNotExist
2	inactive
3	active
4	negative

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.5

mpcEgressCacheEgressCacheTagValid

If the value of this object is true(1), then a valid
Egress Cache Tag is present and the value of the Egress
Cache Tag is in mpcEgressCacheEgressCacheTag. Otherwise,
if this value is false(2), then there was no Egress
…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.6

mpcEgressCacheEgressCacheTag

If a valid Egress Cache Tag is present, then this
object contains the value of that tag. To determine
if this object contains a valid value,
mpcEgressCacheEgressCacheTagValid should be used.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.7

mpcEgressCacheHoldTime

The remaining time for which this entry is valid.

SNMPv2-TCTimeInterval

Textual Convention: SNMPv2-TCTimeInterval Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.8

mpcEgressCacheDataLinkHeader

The DataLink header that the egress client rebuilds
the original DataLink packet with.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.9

mpcEgressCacheIngressMpcDataAtmAddr

The Data ATM Address of the ingress MPC that issued
the MPOA Resolution request

AtmAddr

Textual Convention: AtmAddr OctetString

Type Constraints:
range: 0
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.10

mpcEgressCacheLecIndex

This is the lecIndex of the LANE Client that this flow
is associated with. This can be used to get the ELAN
name as well as other LANE parameters.

LecIndex

Textual Convention: LecIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.11

mpcEgressCacheServiceCategory

This is a bitmap describing the service categories
supported for this shortcut. This value represents
an inclusive OR of the bits:

bit 1 - if rt-VBR is supported,
bit 2 - if nrt-VBR is supported,
bit 4 -…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.353.5.8.1.1.2.15.1.12

mpcMpsMultipleMacAddressTable

table

.1.3.6.1.4.1.353.5.8.1.1.2.16.1 · 1 row entry · 3 columns

Open in standard view

This is a read-only table which contains
information about all the MPSs' MAC Addresses
that these MPCs use during flow detection.
Note that due to the multinetted case an MPC may learn
about more than one MAC address from an MPS,
thus there may be more than one MAC address for the
same MPC - MPS - LecIndex represented in this
Table.  These MacAddresses are differentiated by
the mpcMpsMacAddressIndex.

mpcMpsMultipleMacAddressEntry entry .1.3.6.1.4.1.353.5.8.1.1.2.16.1.1

A row is created by an MPC. The MPC learns about a
MPS and the one or more MAC Address of the MPS which
the MPC uses during flow detection. Each row represents
an MPS MAC Address used by an MPC during flow detection.

Indexes

mpcMpsIndex mpcFlowDetectLecIndex mpcMpsMacAddressIndex

Column	Syntax	OID
mpcFlowDetectLecIndex The lecIndex which represents the associated LEC.	LecIndex Textual Convention: LecIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.353.5.8.1.1.2.16.1.1.1`
mpcMpsMacAddressIndex This value is used to differentiate MAC Addresses from the same MPS used by the same MPC during flow detection. This value should be unique within the scope of this table.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.353.5.8.1.1.2.16.1.1.2`
mpcMpsFlowDetectMacAddress An MPS MAC Address used by an MPC during flow detection.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.353.5.8.1.1.2.16.1.1.3`

mpsConfigTable

table

.1.3.6.1.4.1.353.5.8.1.1.3.2 · 1 row entry · 10 columns

Open in standard view

The MPOA Server Configuration Table.
This table represents the configuration information for
all MPOA Servers which this agent manages.

mpsConfigEntry entry .1.3.6.1.4.1.353.5.8.1.1.3.2.1

MPOA Server Configuration Entry.
Each entry contains configuration information
for one MPOA Server.

Indexes

mpsIndex

Column Syntax OID

mpsIndex

A value which uniquely identifies this conceptual
row in the mpsConfigTable. The `mpsNextIndex' object
needs to be used to determine the value of this object.
A row cannot be added, unless the mpsCtrlAtmAddress
is uniq…

MpsIndex

Textual Convention: MpsIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.2.1.1

mpsRowStatus

This object allows creation and deletion of MPOA Servers.
Within each conceptual mpsConfigTable row, objects which are
writable may be modified regardless of the value of
mpsRowStatus. It is not necessary to set a row'…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.353.5.8.1.1.3.2.1.2

mpsConfigMode

Indicates whether this MPS should auto-configure
the next time it is (re-)initialized.
In automatic(1) mode the LECS is contacted and
requests are made for the MPS-p* parameters.
In manual(2) mode, the values of the con…

Enumerationr/w

Enumerated Values:

1	automatic
2	manual

.1.3.6.1.4.1.353.5.8.1.1.3.2.1.3

mpsCtrlAtmAddr

The MPS's Control ATM Address. There exists one
Control ATM Address per MPS, therefore, the value
of this entry is unique within the table.

AtmConfigAddrr/w

Textual Convention: AtmConfigAddr OctetString

Type Constraints:
range: 1
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.3.2.1.4

mpsKeepAliveTime

MPS-p1 Keep-alive time is max interval between
the MPS sending MPOA Keep-Alives in seconds.

Integer32r/w

Constraints:
range: 1-300

.1.3.6.1.4.1.353.5.8.1.1.3.2.1.5

mpsKeepAliveLifeTime

MPS-p2 Keep-Alive Lifetime
The length of time an MPC may consider a Keep-Alive
valid in seconds. This value must be at least
three times the mpsKeepAliveTime (MPS-p1).

Integer32r/w

Constraints:
range: 3-1000

.1.3.6.1.4.1.353.5.8.1.1.3.2.1.6

mpsInitialRetryTime

MPS-p4 is initial value in seconds for the
MPOA retry mechanism.

Integer32r/w

Constraints:
range: 1-300

.1.3.6.1.4.1.353.5.8.1.1.3.2.1.7

mpsRetryTimeMaximum

MPS-p5 cumulative max value in seconds
for Retry Time (MPS-p4).

Integer32r/w

Constraints:
range: 10-300

.1.3.6.1.4.1.353.5.8.1.1.3.2.1.8

mpsGiveupTime

MPS-p6 Give Up Time.
Minimum time in seconds to wait before giving up on a
pending resolution request.

Integer32r/w

Constraints:
range: 5-300

.1.3.6.1.4.1.353.5.8.1.1.3.2.1.9

mpsDefaultHoldingTime

MPS-p7 Default Holding Time in minutes.
The default Holding Time used in NHRP
Resolution Replies. An egress MPS may use
local information to determine a more
appropriate Holding Time.

Integer32r/w

Constraints:
range: 1-120

.1.3.6.1.4.1.353.5.8.1.1.3.2.1.10

mpsActualTable

table

.1.3.6.1.4.1.353.5.8.1.1.3.3 · 1 row entry · 9 columns

Open in standard view

A read-only table containing identification, status,
and operational information about the MPOA
Servers this agent manages.

mpsActualEntry entry .1.3.6.1.4.1.353.5.8.1.1.3.3.1

An entry in the MPS Actual Table.
An entry represents a specific MPOA Server's
status and operation information.

Indexes

No indexes recorded

Column Syntax OID

mpsActualState

This object indicates the current operational
status of the MPOA Server.

Enumeration

Enumerated Values:

1	unknown
2	initialState
3	up
4	down

.1.3.6.1.4.1.353.5.8.1.1.3.3.1.1

mpsDiscontinuityTime

The value of sysUpTime on the most recent occasion at
which any one or more of this MPS's counters
experienced a discontinuity. The relevant counters
are the specific instances associated with this
MPS. If discontinui…

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.353.5.8.1.1.3.3.1.2

mpsActualConfigMode

Indicates whether this MPS auto-configured
when it was last (re-)initialized.

Enumeration

Enumerated Values:

1	automatic
2	manual

.1.3.6.1.4.1.353.5.8.1.1.3.3.1.3

mpsActualKeepAlive

The maximum amount of time in seconds this MPS waits
between sending MPOA Keep-Alives.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.3.1.5

mpsActualKeepAliveLifeTime

The length of time in seconds this MPS
considers a Keep-Alive valid.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.3.1.6

mpsActualInitialRetryTime

The actual initial value in seconds for the MPOA
retry mechanism.

Integer32

Constraints:
range: 1-300

.1.3.6.1.4.1.353.5.8.1.1.3.3.1.7

mpsActualRetryTimeMaximum

The actual cumulative max value in seconds
for Retry Time.

Integer32

Constraints:
range: 30-300

.1.3.6.1.4.1.353.5.8.1.1.3.3.1.8

mpsActualGiveupTime

Minimum time in seconds that this MPS waits
before giving up on a pending resolution request.

Integer32

Constraints:
range: 5-300

.1.3.6.1.4.1.353.5.8.1.1.3.3.1.9

mpsActualDefaultHoldingTime

The actual Holding Time in minutes used in
NHRP Resolution Replies.

Integer32

Constraints:
range: 1-120

.1.3.6.1.4.1.353.5.8.1.1.3.3.1.10

mpsStatisticsTable

table

.1.3.6.1.4.1.353.5.8.1.1.3.4 · 1 row entry · 26 columns

Open in standard view

This table represents the statistical information
for the MPSs, which this agent manages.

mpsStatisticsEntry entry .1.3.6.1.4.1.353.5.8.1.1.3.4.1

Each row in this table contains statistics
for one MPOA server.

Indexes

No indexes recorded

Column	Syntax	OID
mpsStatRxMpoaResolveRequests The number of MPOA Resolve Requests received by this MPS which are translated to NHRP resolve requests. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-ini…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.1`
mpsStatTxMpoaResolveReplyAcks The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE Code of 0x00, `Success'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.2`
mpsStatTxMpoaResolveReplyInsufECResources The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE Code of 0x81, `Insufficient resources to accept egress cache entry'. Discontinuities in the value of this counter can occur at re-ini…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.3`
mpsStatTxMpoaResolveReplyInsufSCResources The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE Code of 0x82, `Insufficient resources to accept shortcut'. Discontinuities in the value of this counter can occur at re-initializatio…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.4`
mpsStatTxMpoaResolveReplyInsufEitherResources The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x83, `Insufficient resources to accept either shortcut or egress cache entry'. Discontinuities in the value of this counter …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.5`
mpsStatTxMpoaResolveReplyUnsupportedInetProt The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x84, `Unsupported Internetwork Layer protocol'. Discontinuities in the value of this counter can occur at re-initialization …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.6`
mpsStatTxMpoaResolveReplyUnsupportedMacEncaps The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x85, `Unsupported MAC layer encapsulation'. Discontinuities in the value of this counter can occur at re-initialization of t…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.7`
mpsStatTxMpoaResolveReplyUnspecifiedOther The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x88, `Unspecified/Other'. Discontinuities in the value of this counter can occur at re-initialization of the management syst…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.8`
mpsStatTxMpoaResolveReplyOther The number of MPOA Resolve Replies transmitted by this MPS which are not counted above. NOTE: this would include NHRP errors. Discontinuities in the value of this counter can occur at re-initialization of the manageme…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.9`
mpsStatGiveupTimeExpireds The number of times the MPS Give up Time (MPS-p6) has expired while waiting for a reply from a re-originated MPOA resolution request, i.e. a reply for a translated NHRP resolution request. Discontinuities in the value o…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.10`
mpsStatTxMpoaImpRequests The number of MPOA Cache Imposition Requests transmitted by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at oth…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.11`
mpsStatRxMpoaImpReplyAcks The number of successful MPOA Cache Imposition Replies received by this MPS which contain an MPOA CIE Code of 0x00, `Success'. Discontinuities in the value of this counter can occur at re-initialization of the managemen…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.12`
mpsStatRxMpoaImpReplyInsufECResources The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x81, `Insufficient resources to accept egress cache entry'. Discontinuities in the value of this counter can occur at …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.13`
mpsStatRxMpoaImpReplyInsufSCResources The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x82, `Insufficient resources to accept shortcut'. Discontinuities in the value of this counter can occur at re-initial…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.14`
mpsStatRxMpoaImpReplyInsufEitherResources The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x83, `Insufficient resources to accept either shortcut or egress cache entry'. Discontinuities in the value of this co…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.15`
mpsStatRxMpoaImpReplyUnsupportedInetProt The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x84, `Unsupported Internetwork Layer protocol'. Discontinuities in the value of this counter can occur at re-initializ…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.16`
mpsStatRxMpoaImpReplyUnsupportedMacEncaps The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x85, `Unsupported MAC layer encapsulation'. Discontinuities in the value of this counter can occur at re-initializatio…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.17`
mpsStatRxMpoaImpReplyUnspecifiedOther The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x88, `Unspecified/Other'. Discontinuities in the value of this counter can occur at re-initialization of the managemen…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.18`
mpsStatRxMpoaImpReplyOther The number of MPOA Cache Imposition Replies received by this MPS which are not counted previously. NOTE: this would include NHRP errors. Discontinuities in the value of this counter can occur at re-initialization of th…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.19`
mpsStatRxMpoaEgressCachePurgeRequests The number of MPOA Egress Cache Purges Requests received by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at oth…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.20`
mpsStatTxMpoaEgressCachePurgeReplies The number of MPOA Egress Cache Purge Replies transmitted by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at ot…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.21`
mpsStatTxMpoaTriggers The number of MPOA Trigger messages transmitted by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times,…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.22`
mpsStatTxNhrpResolveRequests Total count of MPOA Resolution Requests received by the Ingress MPS which were translated to NHRP Resolution Requests and transmitted to the NHS. Discontinuities in the value of this counter can occur at re-initializati…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.23`
mpsStatRxNhrpResolveReplies Total count of NHRP Resolution Replies received by the Ingress. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other tim…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.24`
mpsStatRxNhrpResolveRequests Total count of NHRP Resolution Requests received by the Egress MPS from the NHS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS,…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.25`
mpsStatTxNhrpResolveReplies Total count of NHRP Resolution Replies transmitted by the Egress MPS to the NHS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS,…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.353.5.8.1.1.3.4.1.26`

mpsProtocolTable

table

.1.3.6.1.4.1.353.5.8.1.1.3.5 · 1 row entry · 3 columns

Open in standard view

List of protocols, per MPS, for which
MPOA resolution is enabled.

mpsProtocolEntry entry .1.3.6.1.4.1.353.5.8.1.1.3.5.1

Each row indicates one protocol for which an MPS
will perform MPOA resolution.
If the LECS was contacted for configuration
information, and the MPS-p3's control octet is set to Enable,
0x01, then protocol values retriev…

Indexes

mpsIndex mpsInternetworkLayerProtocol

Column Syntax OID

mpsInternetworkLayerProtocol

MPS-p3 A protocol on which to perform MPOA resolution.

InternetworkAddrType

Textual Convention: InternetworkAddrType Enumeration

Type Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	ieee802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164WithNsap

.1.3.6.1.4.1.353.5.8.1.1.3.5.1.1

mpsLECSValue

This object reflects if the current entry is due to
a retrieval from the LECS or not. If this entry is
due to the LECS, then true(1) is the value for this object,
otherwise, false (2).

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.353.5.8.1.1.3.5.1.2

mpsProtocolRowStatus

This object allows network managers to enable
resolution for the `mpsInternetworkLayerProtocol'.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.353.5.8.1.1.3.5.1.3

mpsMappingTable

table

.1.3.6.1.4.1.353.5.8.1.1.3.6 · 1 row entry · 2 columns

Open in standard view

A table mapping the `lecIndex' values of
LANE Clients to the `mpsIndex' values of
corresponding MPOA Servers.

mpsMappingEntry entry .1.3.6.1.4.1.353.5.8.1.1.3.6.1

Each row defines one lecIndex --> mpsIndex mapping.
The mpsIndex that a lecIndex maps to is not
necessarily unique. In other words, there can be
multiple LECs associated with one MPS.

Indexes

LAN-EMULATION-CLIENT-MIBlecIndex

Column Syntax OID

mpsMappingRowStatus

Allows creation, enabling/disabling of this row.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.353.5.8.1.1.3.6.1.1

mpsMappingIndex

The mpsMappingIndex of the MPOA Server that is associated with
this LEC. The mpsMappingIndex corresponds to the mpsIndex.

MpsIndexr/w

Textual Convention: MpsIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.6.1.2

mpsIngressCacheTable

table

.1.3.6.1.4.1.353.5.8.1.1.3.7 · 1 row entry · 12 columns

Open in standard view

This table tracks all the Ingress Cache information
of the MPSs which this agents manages.

mpsIngressCacheEntry entry .1.3.6.1.4.1.353.5.8.1.1.3.7.1

A entry contains parameters and state variables
for a row in a MPS's Ingress Cache.

Indexes

mpsIngressCacheDestInternetworkAddrType mpsIngressCacheDestAddr mpsIndex mpsMpcIndex

Column Syntax OID

mpsIngressCacheDestInternetworkAddrType

The type of internetwork layer address of the
Destination Address.

InternetworkAddrType

Textual Convention: InternetworkAddrType Enumeration

Type Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	ieee802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164WithNsap

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.1

mpsIngressCacheDestAddr

The Ingress MPS Destination Internetwork Layer Address.

InternetworkAddr

Textual Convention: InternetworkAddr OctetString

Type Constraints:
range: 0..60

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.2

mpsIngressCachePrefixLen

The Prefix Length of the mpsIngressCacheDestAddr.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.3

mpsIngressCacheEntryState

The state of this MPS Ingress cache.
The states are:
doesNotExist (1) -- the state is not yet available
inactive (2) -- state exists, entry is not yet active
For example,if using the Finit…

Enumeration

Enumerated Values:

1	doesNotExist
2	inactive
3	active
4	negative

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.4

mpsIngressCacheSrcInternetworkAddrType

The type of internetwork layer address of the
Source Address.

InternetworkAddrType

Textual Convention: InternetworkAddrType Enumeration

Type Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	ieee802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164WithNsap

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.5

mpsIngressCacheSrcAddr

The Ingress MPS Source Internetwork Layer Address.

InternetworkAddr

Textual Convention: InternetworkAddr OctetString

Type Constraints:
range: 0..60

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.6

mpsIngressCacheSourceMpcCtrlAtmAddr

The ATM Address from the source of this MPOA request.
In other words, the Ingress MPC's Control Atm Address.

AtmAddr

Textual Convention: AtmAddr OctetString

Type Constraints:
range: 0
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.7

mpsIngressCacheResolvedAtmAddr

The ATM Address which has been resolved by an Egress MPC.

AtmAddr

Textual Convention: AtmAddr OctetString

Type Constraints:
range: 0
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.8

mpsIngressCacheHoldTime

Time interval that this value is valid.

SNMPv2-TCTimeInterval

Textual Convention: SNMPv2-TCTimeInterval Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.9

mpsIngressCacheMpoaRequestId

The request ID contained in the MPOA resolution request
from the local Ingress MPC.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.10

mpsIngressCacheNhrpRequestId

The request ID which this MPS generates to identify the
NHRP resolution request.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.11

mpsIngressCacheServiceCategory

The service categories supported for this shortcut.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.353.5.8.1.1.3.7.1.12

mpsEgressCacheTable

table

.1.3.6.1.4.1.353.5.8.1.1.3.8 · 1 row entry · 14 columns

Open in standard view

This table contains information regarding the
Egress MPOA Server Cache Table.

mpsEgressCacheEntry entry .1.3.6.1.4.1.353.5.8.1.1.3.8.1

An entry represents an entry in the MPS's Egress
cache Table which keeps track of the state of the
impositions.

Indexes

mpsEgressCacheId mpsIndex mpsMpcIndex

Column Syntax OID

mpsEgressCacheId

The id which identifies this cache entry.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.1

mpsEgressCacheDestInternetworkAddrType

The destination protocol address type.

InternetworkAddrType

Textual Convention: InternetworkAddrType Enumeration

Type Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	ieee802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164WithNsap

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.2

mpsEgressCacheDestAddr

The destination protocol address.

InternetworkAddr

Textual Convention: InternetworkAddr OctetString

Type Constraints:
range: 0..60

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.3

mpsEgressCachePrefixLen

The destination prefix length.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.4

mpsEgressCacheHoldTime

Time interval that this value is valid.

SNMPv2-TCTimeInterval

Textual Convention: SNMPv2-TCTimeInterval Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.5

mpsEgressCacheEntryState

The present states of this MPS egress cache entry.
The states are:
doesNotExist (1) -- the state is not yet available
inactive (2) -- state exists, entry is not yet active
For example,if using the Fi…

Enumeration

Enumerated Values:

1	doesNotExist
2	inactive
3	active
4	negative

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.6

mpsEgressCacheDataLinkHeader

Data-Link Layer Header.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.7

mpsEgressCacheElanId

The elan id that this Cache Imposition is sent on.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.8

mpsEgressCacheSourceClientAtmAddr

The Ingress NHC's Atm Address used in the
original cache imposition.

AtmAddr

Textual Convention: AtmAddr OctetString

Type Constraints:
range: 0
range: 8
range: 20

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.9

mpsEgressCacheNhrpRequestId

The request id from the original NHRP Resolution Request,
may be only useful in the Resolving State.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.10

mpsEgressCacheMpoaRequestId

The new request id which is generated for this imposition's
request, may be only useful in the Resolving State.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.11

mpsEgressCacheServiceCategory

The service categories supported for this shortcut.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.12

mpsEgressCacheNextHopInternetworkAddrType

The NextHop protocol address type.

InternetworkAddrType

Textual Convention: InternetworkAddrType Enumeration

Type Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	ieee802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164WithNsap

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.13

mpsEgressCacheNextHopAddr

The NextHop protocol address.

InternetworkAddr

Textual Convention: InternetworkAddr OctetString

Type Constraints:
range: 0..60

.1.3.6.1.4.1.353.5.8.1.1.3.8.1.14

mpsMpcTable

table

.1.3.6.1.4.1.353.5.8.1.1.3.9 · 1 row entry · 2 columns

Open in standard view

This read-only table contains information about the
MPCs that these MPSs know about.

mpsMpcEntry entry .1.3.6.1.4.1.353.5.8.1.1.3.9.1

A row created by an MPS. The MPS learns about the MPC and
creates a row.

Indexes

mpsIndex mpsMpcIndex

Column	Syntax	OID
mpsMpcIndex The local index for the mpc represented by this entry	MpcIndex Textual Convention: MpcIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.353.5.8.1.1.3.9.1.1`
mpsMpcCtrlAtmAddr MPC control ATM address	AtmAddr Textual Convention: AtmAddr `OctetString` Type Constraints: `range: 0` `range: 8` `range: 20`	`.1.3.6.1.4.1.353.5.8.1.1.3.9.1.2`