mpsRowStatus
MPOA-MIB ·
.1.3.6.1.4.1.353.5.8.1.1.3.2.1.2
Object
This object allows creation and deletion of MPOA Servers.
Within each conceptual mpsConfigTable row, objects which are
writable may be modified regardless of the value of
mpsRowStatus. It is not necessary to set a row's status
to `notInService' first.
A row cannot be created, unless the mpsAtmCtrlAddress
in this table is unique. When an MPOA Server is created
via this object, it will initially have
`mpsActualState' = `initialState'.
Context
- MIB
- MPOA-MIB
- OID
.1.3.6.1.4.1.353.5.8.1.1.3.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mpsConfigEntry
- Table
- mpsConfigTable
- Siblings
- 9
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mpsIndex A value which uniquely identifies this conceptual
row in the mpsConfigTable. The `mpsNextIndex' object
needs to be used to determine the value of this object.
A row cannot be add… | column | MpsIndex | .1.3.6.1.4.1.353.5.8.1.1.3.2.1.1 |
| mpsDefaultHoldingTime MPS-p7 Default Holding Time in minutes.
The default Holding Time used in NHRP
Resolution Replies. An egress MPS may use
local information to determine a more
appropriate Holding … | column | Integer32 | .1.3.6.1.4.1.353.5.8.1.1.3.2.1.10 |
| mpsConfigMode Indicates whether this MPS should auto-configure
the next time it is (re-)initialized.
In automatic(1) mode the LECS is contacted and
requests are made for the MPS-p* parameters.
… | column | Enumeration | .1.3.6.1.4.1.353.5.8.1.1.3.2.1.3 |
| mpsCtrlAtmAddr The MPS's Control ATM Address. There exists one
Control ATM Address per MPS, therefore, the value
of this entry is unique within the table. | column | AtmConfigAddr | .1.3.6.1.4.1.353.5.8.1.1.3.2.1.4 |
| mpsKeepAliveTime MPS-p1 Keep-alive time is max interval between
the MPS sending MPOA Keep-Alives in seconds. | column | Integer32 | .1.3.6.1.4.1.353.5.8.1.1.3.2.1.5 |
| mpsKeepAliveLifeTime MPS-p2 Keep-Alive Lifetime
The length of time an MPC may consider a Keep-Alive
valid in seconds. This value must be at least
three times the mpsKeepAliveTime (MPS-p1). | column | Integer32 | .1.3.6.1.4.1.353.5.8.1.1.3.2.1.6 |
| mpsInitialRetryTime MPS-p4 is initial value in seconds for the
MPOA retry mechanism. | column | Integer32 | .1.3.6.1.4.1.353.5.8.1.1.3.2.1.7 |
| mpsRetryTimeMaximum MPS-p5 cumulative max value in seconds
for Retry Time (MPS-p4). | column | Integer32 | .1.3.6.1.4.1.353.5.8.1.1.3.2.1.8 |
| mpsGiveupTime MPS-p6 Give Up Time.
Minimum time in seconds to wait before giving up on a
pending resolution request. | column | Integer32 | .1.3.6.1.4.1.353.5.8.1.1.3.2.1.9 |