MPLS-LPS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
35

mplsLpsConfigTable

table
.1.3.6.1.2.1.10.166.22.1.2 · 1 row entry · 16 columns
Open in standard view 
This table lists the MPLS-TP linear protection domains that
have been configured on the system.
An entry is created by a network operator who wants to run
the MPLS-TP linear protection protocol for the protection
domain.
mplsLpsConfigEntry entry .1.3.6.1.2.1.10.166.22.1.2.1
A conceptual row in the mplsLpsConfigTable.
Indexes
mplsLpsConfigDomainIndex
Column Syntax OID
mplsLpsConfigDomainIndex
Index for the conceptual row identifying a protection domain.
Operators should obtain new values for row creation in this
table by reading mplsLpsConfigDomainIndexNext.

When the value of this object is th…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.2.1.10.166.22.1.2.1.1
mplsLpsConfigDomainName
Textual name that represents the MPLS-TP linear protection
domain. It facilitates easy administrative identification of
each protection domain.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.2.1.10.166.22.1.2.1.2
mplsLpsConfigMode
The mode of the MPLS-TP linear protection mechanism. This can
be either PSC or APS, as follows:

PSC
The Protection State Coordination mode as described in
RFC 6378.

APS
The Automatic Prote…
Enumerationr/w
Enumerated Values:
1psc
2aps
 .1.3.6.1.2.1.10.166.22.1.2.1.3
mplsLpsConfigProtectionType
The protection architecture type of the protection domain.
This object represents both the bridge type, which can be
either a permanent bridge (1+1) or a selector bridge (1:1);
and the switching scheme, which can be eit…
Enumerationr/w
Enumerated Values:
1onePlusOneUnidirectional
2oneColonOneBidirectional
3onePlusOneBidirectional
 .1.3.6.1.2.1.10.166.22.1.2.1.4
mplsLpsConfigRevertive
This object represents the reversion mode of the linear
protection domain. The reversion mode of the protection
mechanism may be either revertive or non-revertive.

nonrevertive
In the non-revertive mode,…
Enumerationr/w
Enumerated Values:
1nonrevertive
2revertive
 .1.3.6.1.2.1.10.166.22.1.2.1.5
mplsLpsConfigSdThreshold
This object holds the threshold value of the Signal Degrade
(SD) defect in percent. In order to detect the SD defect,
the MPLS-TP packet loss measurement (LM) is performed
every second.

If either the pac…
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.2.1.10.166.22.1.2.1.6
mplsLpsConfigSdBadSeconds
This object holds the number of Bad Seconds to detect the SD.

If the number of consecutive Bad Seconds reaches this value,
the SD defect is detected and used as an input to
the protection switching proces…
secondsUnsigned32r/w
Constraints:
range: 2-10
 .1.3.6.1.2.1.10.166.22.1.2.1.7
mplsLpsConfigSdGoodSeconds
This object holds the number of Good Seconds to declare
the clearance of an SD defect.

After an SD defect occurs on a path, if the number of
consecutive Good Seconds reaches this value for the
degraded pa…
secondsUnsigned32r/w
Constraints:
range: 2-10
 .1.3.6.1.2.1.10.166.22.1.2.1.8
mplsLpsConfigWaitToRestore
This object holds the Wait-to-Restore timer value in minutes
and can be configured in 1-minute intervals between 5 and
12 minutes.

The WTR timer is used to delay the reversion of the PSC state
to the Norm…
minutesUnsigned32r/w
Constraints:
range: 5-12
 .1.3.6.1.2.1.10.166.22.1.2.1.9
mplsLpsConfigHoldOff
The hold-off time in deciseconds. Represents the time
between SF/SD condition detection and declaration of
an SF/SD request to the protection switching logic.
It is intended to avoid unnecessary switching when a
lower-…
decisecondsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.2.1.10.166.22.1.2.1.10
mplsLpsConfigContinualTxInterval
The Continual Tx Time in seconds. Represents the time
interval to send the continual PSC packet to the other
end, based on the current state.

This object may not be modified if the associated
mplsLpsConf…
secondsUnsigned32r/w
Constraints:
range: 1-20
 .1.3.6.1.2.1.10.166.22.1.2.1.11
mplsLpsConfigRapidTxInterval
The Rapid Tx interval in microseconds. Represents the time
interval to send the PSC packet to the other end, when
there is a change in the state of the linear protection domain
due to local input. The default value is…
microsecondsUnsigned32r/w
Constraints:
range: 1000-20000
 .1.3.6.1.2.1.10.166.22.1.2.1.12
mplsLpsConfigCommand
Allows the initiation of an operator command on
the protection domain.

When read, this object returns the last command written
or noCmd if no command has been written since initialization.
The return of t…
MplsLpsCommandr/w
Textual Convention: MplsLpsCommand Enumeration
Type Values:
1noCmd
2clear
3lockoutOfProtection
4forcedSwitch
5manualSwitchToWork
6manualSwitchToProtect
7exercise
8freeze
9clearfreeze
 .1.3.6.1.2.1.10.166.22.1.2.1.13
mplsLpsConfigCreationTime
The value of sysUpTime at the time the row was created.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.2.1.10.166.22.1.2.1.14
mplsLpsConfigRowStatus
This object represents the status of the MPLS-TP linear
protection domain entry. This variable is used to
create, modify, and/or delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.166.22.1.2.1.15
mplsLpsConfigStorageType
The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write access to any columnar objects in the row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.2.1.10.166.22.1.2.1.16

mplsLpsStatusTable

table
.1.3.6.1.2.1.10.166.22.1.3 · 1 row entry · 11 columns
Open in standard view 
This table provides status information about MPLS-TP
linear protection domains that have been configured
on the system.
mplsLpsStatusEntry entry .1.3.6.1.2.1.10.166.22.1.3.1
A conceptual row in the mplsLpsStatusTable.
Indexes
No indexes recorded
Column Syntax OID
mplsLpsStatusState
The current state of the PSC state machine.
MplsLpsState
Textual Convention: MplsLpsState Enumeration
Type Values:
1normal
2unavLOlocal
3unavSFPlocal
4unavSDPlocal
5unavLOremote
6unavSFPremote
7unavSDPremote
8protfailSFWlocal
9protfailSDWlocal
10protfailSFWremote
11protfailSDWremote
12switadmFSlocal
13switadmMSWlocal
14switadmMSPlocal
15switadmFSremote
16switadmMSWremote
17switadmMSPremote
18wtr
19dnr
20exerLocal
21exerRemote
 .1.3.6.1.2.1.10.166.22.1.3.1.1
mplsLpsStatusReqRcv
The current value of the PSC Request field received on
the most recent PSC packet.
MplsLpsReq
Textual Convention: MplsLpsReq Enumeration
Type Values:
0noRequest
1doNotRevert
2reverseRequest
3exercise
4waitToRestore
5manualSwitch
7signalDegrade
10signalFail
12forcedSwitch
14lockoutOfProtection
 .1.3.6.1.2.1.10.166.22.1.3.1.2
mplsLpsStatusReqSent
The current value of the PSC Request field sent on the
most recent PSC packet.
MplsLpsReq
Textual Convention: MplsLpsReq Enumeration
Type Values:
0noRequest
1doNotRevert
2reverseRequest
3exercise
4waitToRestore
5manualSwitch
7signalDegrade
10signalFail
12forcedSwitch
14lockoutOfProtection
 .1.3.6.1.2.1.10.166.22.1.3.1.3
mplsLpsStatusFpathPathRcv
The current value of the FPath and Path fields received
on the most recent PSC packet.
MplsLpsFpathPath
Textual Convention: MplsLpsFpathPath OctetString
Type Constraints:
range: 2
 .1.3.6.1.2.1.10.166.22.1.3.1.4
mplsLpsStatusFpathPathSent
The current value of the FPath and Path fields sent
on the most recent PSC packet.
MplsLpsFpathPath
Textual Convention: MplsLpsFpathPath OctetString
Type Constraints:
range: 2
 .1.3.6.1.2.1.10.166.22.1.3.1.5
mplsLpsStatusRevertiveMismatch
This object indicates a provisioning mismatch in the
revertive mode across the protection domain endpoints.
The value of this object becomes true when a PSC message with
an incompatible Revertive field is received or fa…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.2.1.10.166.22.1.3.1.6
mplsLpsStatusProtecTypeMismatch
This object indicates a provisioning mismatch in the
protection type, representing both the bridge type and the
switching type, across the protection domain endpoints.
The value of this object becomes true when a PSC me…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.2.1.10.166.22.1.3.1.7
mplsLpsStatusCapabilitiesMismatch
This object indicates a provisioning mismatch in
Capabilities TLVs across the protection domain endpoints.
The value of this object becomes true when a PSC message with
an incompatible Capabilities TLV field is received…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.2.1.10.166.22.1.3.1.8
mplsLpsStatusPathConfigMismatch
This object indicates a provisioning mismatch in the
protection path configuration for PSC communication across
the protection domain endpoints.

The value of this object becomes true when a PSC message is…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.2.1.10.166.22.1.3.1.9
mplsLpsStatusFopNoResponses
This object holds the number of occurrences of protocol
failure due to a lack of response to a traffic
switchover request within 50 ms.

When there is a traffic switchover due to a local request,
a 50 ms t…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.166.22.1.3.1.10
mplsLpsStatusFopTimeouts
This object holds the number of occurrences of protocol
failure due to no PSC message being received during
at least 3.5 times the long PSC message interval.

When no PSC message is received on the protect…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.166.22.1.3.1.11

mplsLpsMeConfigTable

table
.1.3.6.1.2.1.10.166.22.1.4 · 1 row entry · 2 columns
Open in standard view 
This table lists ME associations that have been configured
in protection domains.
mplsLpsMeConfigEntry entry .1.3.6.1.2.1.10.166.22.1.4.1
A conceptual row in the mplsLpsMeConfigTable. There is
a sparse relationship between the conceptual rows of
this table and the mplsOamIdMeTable.

Each time that an entry is created in the mplsOamIdMeTable
f…
Indexes
MPLS-OAM-ID-STD-MIBmplsOamIdMegIndex MPLS-OAM-ID-STD-MIBmplsOamIdMeIndex MPLS-OAM-ID-STD-MIBmplsOamIdMeMpIndex
Column Syntax OID
mplsLpsMeConfigDomain
This object holds the mplsLpsConfigDomainIndex value for
the protection domain in which this ME is included.
If this ME is not part of any protection domain, then
this object contains the value 0.

When th…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.2.1.10.166.22.1.4.1.1
mplsLpsMeConfigPath
This object represents whether the ME is configured
as the working path or the protection path.
Enumerationr/w
Enumerated Values:
1working
2protection
 .1.3.6.1.2.1.10.166.22.1.4.1.2

mplsLpsMeStatusTable

table
.1.3.6.1.2.1.10.166.22.1.5 · 1 row entry · 6 columns
Open in standard view 
This table contains status information of all the MEs
that are included in MPLS-TP linear protection domains.
mplsLpsMeStatusEntry entry .1.3.6.1.2.1.10.166.22.1.5.1
A conceptual row in the mplsLpsMeStatusTable.
Indexes
No indexes recorded
Column Syntax OID
mplsLpsMeStatusCurrent
Indicates the current state of the ME.

localSelectTraffic
This bit indicates that traffic is being selected from
this ME.

localSD
This bit implies that a local Signal Degrade condition is
i…
Bits
Enumerated Values:
0localSelectTraffic
1localSD
2localSF
 .1.3.6.1.2.1.10.166.22.1.5.1.1
mplsLpsMeStatusSignalDegrades
Represents the count of Signal Degrade conditions.
For the detection and clearance of Signal Degrade,
see the description of mplsLpsConfigSdThreshold.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.166.22.1.5.1.2
mplsLpsMeStatusSignalFailures
Represents the count of Signal Fail conditions.
This condition occurs when the OAM running on this ME
detects the Signal Fail event.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.166.22.1.5.1.3
mplsLpsMeStatusSwitchovers
Represents the count of switchovers that happened in this ME.

When the mplsLpsMeConfigPath value is 'working', this object
will return the number of times that traffic has been
switched from this working …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.166.22.1.5.1.4
mplsLpsMeStatusLastSwitchover
This object holds the value of sysUpTime at the time that
the last switchover happened.

When the mplsLpsMeConfigPath value is 'working', this object
will return the value of sysUpTime when traffic was swi…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.2.1.10.166.22.1.5.1.5
mplsLpsMeStatusSwitchoverSeconds
The cumulative Protection Switching Duration (PSD) time
in seconds.

For the working path, this is the cumulative number of
seconds that traffic was selected from the protection path.

For th…
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.166.22.1.5.1.6