MLD-SNOOPING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

swMldSnoopingCtrlTable

table

.1.3.6.1.4.1.171.12.34.3.2 · 1 row entry · 13 columns

Open in standard view

The table controls the VLAN's MLD function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If the VLAN is in
disabled mode, there is only one entry in the table, with
index 1. If the VLAN is in Port-Base or 802.1q mode, the number of
entries can be up to 12, with an index range from 1 to 12.

swMldSnoopingCtrlEntry entry .1.3.6.1.4.1.171.12.34.3.2.1

The entry in MLD control table (swMldSnoopingCtrlTable). The entry
is effective only when MLD capture switch
(swMldSnoopingGlobalState) is enabled.

Indexes

swMldSnoopingCtrlVid

Column Syntax OID

swMldSnoopingCtrlVid

This object indicates the MLD control entry's VLAN ID. If the VLAN
is disabled, the VID is always 0 and cannot be changed by
management users. If VLAN is in Port-Base mode, the VID is
arranged from 1 to 12, fixed form. …

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.12.34.3.2.1.1

swMldSnoopingQueryInterval

The frequency at which MLD Host-Query packets are
transmitted on this switch.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.12.34.3.2.1.2

swMldSnoopingMaxResponseTime

The maximum query response time on this switch.

Integer32r/w

Constraints:
range: 1-25

.1.3.6.1.4.1.171.12.34.3.2.1.3

swMldSnoopingRobustness

The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to have
a high loss, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet loss…

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.171.12.34.3.2.1.4

swMldSnoopingLastMemberQueryInterval

The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages and is also the amount of time between
Group-Specific Query messages.

Integer32r/w

Constraints:
range: 1-25

.1.3.6.1.4.1.171.12.34.3.2.1.5

swMldSnoopingHostTimeout

The timer value for sending a MLD query packet when none were
sent by the host in the LAN. The timer works on a per-VLAN basis.
Our device will be activated to send a query message if the
timer has expired.

Integer32r/w

Constraints:
range: 1-16711450

.1.3.6.1.4.1.171.12.34.3.2.1.6

swMldSnoopingRouteTimeout

The Router Timeout is how long a host must wait after hearing
a Query before it sends any MLD messages.

Integer32r/w

Constraints:
range: 1-16711450

.1.3.6.1.4.1.171.12.34.3.2.1.7

swMldSnoopingDoneTimer

When a querier receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries swMldSnoopingDoneTimer to the group
that is left.

Integer32r/w

Constraints:
range: 1-16711450

.1.3.6.1.4.1.171.12.34.3.2.1.8

swMldSnoopingQueryState

This object decides if the MLD query is enabled or disabled.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.12.34.3.2.1.9

swMldSnoopingCurrentState

This object indicates the current MLD query state.

Enumeration

Enumerated Values:

1	other
2	querier
3	non-querier

.1.3.6.1.4.1.171.12.34.3.2.1.10

swMldSnoopingCtrlState

This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions under
which it will remain so are different for each of the following
values.
disable(2…

Enumerationr/w

Enumerated Values:

1	other
2	disable
3	enable

.1.3.6.1.4.1.171.12.34.3.2.1.11

swMldSnoopingFastDoneState

This object indicates the fast_leave status of this entry.

other(1) - this entry is currently in use but the conditions under
which it will remain so are different for each of the following
values…

Enumerationr/w

Enumerated Values:

1	other
2	disable
3	enable

.1.3.6.1.4.1.171.12.34.3.2.1.12

swMldSnoopingVersion

This object indicates the MLD version of this entry.
If the MLD version is configured with a lower version, the higher
version's MLD Report/Leave messages will be ignored.

Enumerationr/w

Enumerated Values:

1	version-1
2	version-2

.1.3.6.1.4.1.171.12.34.3.2.1.13

swMldSnoopingGroupInfoTable

table obsolete

.1.3.6.1.4.1.171.12.34.3.3 · 1 row entry · 5 columns

Open in standard view

The table contains the current MLD snooping information captured by
this device, provided that swMldSnoopingGlobalState and
swMldSnoopingCtrlState of associated VLAN entries are all enabled. Note
that the priority of MLD table entries is lower than the Filtering
Table, i.e. if there is a table hash collision between the
entries of the MLD Table and the Filtering Table inside the switch H/W
address table, then the Filtering Table entry overwrites the
colliding entry of the MLD snooping Table.

swMldSnoopingGroupInfoEntry entry .1.3.6.1.4.1.171.12.34.3.3.1

Information about current MLD information which has been captured
by this device, provided that swMldSnoopingGlobalState and
swMldSnoopingCtrlState of the associated VLAN entries are all enabled.

Indexes

swMldSnoopingGroupInfoVid swMldSnoopingGroupInfoIpAddr

Column	Syntax	OID
swMldSnoopingGroupInfoVid obsolete This object indicates the VID of an individual MLD table entry. It shows the VID of MLD report information that has been captured on the network.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.12.34.3.3.1.1`
swMldSnoopingGroupInfoIpAddr obsolete This object identifies the group IP address which is captured from the MLD packet, on a per-VLAN basis.	Ipv6Address Textual Convention: Ipv6Address `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.171.12.34.3.3.1.2`
swMldSnoopingGroupInfoMacAddr obsolete This object identifies the MAC addresses that correspond to swMldSnoopingGroupInfoIpAddr, on a per-VLAN basis.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.171.12.34.3.3.1.3`
swMldSnoopingGroupInfoPortMap obsolete This object indicates which ports belong to the same multicast group, on a per-VLAN basis. Each multicast group has an octet string to indicate the port map. The most significant bit represents the lowest numbered port,…	PortList Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.12.34.3.3.1.4`
swMldSnoopingGroupInfoReportCount obsolete This object indicates how many report packets were received by our device corresponding with the entry when the MLD function is enabled, on a per-VLAN basis.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.12.34.3.3.1.5`

swMldSnpRouterPortsTable

table

.1.3.6.1.4.1.171.12.34.3.4 · 1 row entry · 4 columns

Open in standard view

This table controls the VLAN's MLD router ports function.

swMldSnpRouterPortsEntry entry .1.3.6.1.4.1.171.12.34.3.4.1

This entry shows the MLD router ports table (swMldSnoopingCtrlTable).

Indexes

swMldSnpRouterPortsVid

Column	Syntax	OID
swMldSnpRouterPortsVid This object indicates the MLD router ports entry VLAN ID. If a VLAN is disabled, the VID is always 0 and cannot be changed by management users. If a VLAN is in Port-Base mode, the VID is arranged from 1 to 12, fixed for…	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.12.34.3.4.1.1`
swMldSnpRouterStaticPortList Displays router ports that have been statically configured.	PortListr/w Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.12.34.3.4.1.2`
swMldSnpRouterDynamicPortList Displays router ports that have been dynamically configured.	PortList Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.12.34.3.4.1.3`
swMldSnpRouterForbiddenPortList Displays router ports that have been configured to be forbidden.	PortListr/w Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.12.34.3.4.1.4`

swMldSnoopingGroupTable

table

.1.3.6.1.4.1.171.12.34.3.5 · 1 row entry · 5 columns

Open in standard view

The table contains the current MLD snooping information captured by
the device, provided that the swMldSnoopingGlobalState and
swMldSnoopingCtrlState of the associated VLAN entries are all enabled. Note
that the priority of the MLD table entries is lower than the Filtering
Table, i.e. if there is a table hash collision between the
entries of the MLD Table and the Filtering Table inside the switch H/W
address table, then the Filtering Table entry overwrites the
colliding entry of the MLD snooping Table.

swMldSnoopingGroupEntry entry .1.3.6.1.4.1.171.12.34.3.5.1

Information about the current MLD information which has been captured by
the device, provided that swMldSnoopingGlobalState and
swMldSnoopingCtrlState of the associated VLAN entries are all enabled.

Indexes

swMldSnoopingGroupVid swMldSnoopingGroupGroupAddr swMldSnoopingGroupSourceAddr

Column	Syntax	OID
swMldSnoopingGroupVid This object indicates the VID of the individual MLD table entry. It shows the VID of the MLD report information captured on the network.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.12.34.3.5.1.1`
swMldSnoopingGroupGroupAddr This object identifies the group IP address which has been captured from the MLD packet, on a per-VLAN basis.	Ipv6Address Textual Convention: Ipv6Address `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.171.12.34.3.5.1.2`
swMldSnoopingGroupSourceAddr This object identifies the source addresses which correspond to swMldSnoopingGroupInfoGroupAddr, on a per-VLAN basis.	Ipv6Address Textual Convention: Ipv6Address `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.171.12.34.3.5.1.3`
swMldSnoopingGroupIncludePortMap This object indicates the port list under INCLUDE mode.	PortList Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.12.34.3.5.1.4`
swMldSnoopingGroupExcludePortMap This object indicates the port list under EXCLUDE mode.	PortList Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.12.34.3.5.1.5`

swMldSnpForwardingTable

table

.1.3.6.1.4.1.171.12.34.3.6 · 1 row entry · 4 columns

Open in standard view

This table contains the MLD Snooping forwarding information.

swMldSnpForwardingEntry entry .1.3.6.1.4.1.171.12.34.3.6.1

A list of information about MLD Snooping forwarding.

Indexes

swMldSnpVid swMldSnpSourceIpAddr swMldSnpMutiGroupIpAddr

Column	Syntax	OID
swMldSnpVid This object indicates the MLD Forwarding entry's VLAN ID.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.12.34.3.6.1.1`
swMldSnpSourceIpAddr This object identifies the forwarding IP address, which is captured from the MLD packet.	Ipv6Address Textual Convention: Ipv6Address `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.171.12.34.3.6.1.2`
swMldSnpMutiGroupIpAddr This object identifies the Multicast Group IP address, which is captured from MLD packet.	Ipv6Address Textual Convention: Ipv6Address `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.171.12.34.3.6.1.3`
swMldSnpForwardingListenPort Indicates the MLD Snooping forwarding listen port.	PortList Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.12.34.3.6.1.4`