swMldSnoopingVersion
MLD-SNOOPING-MIB ·
.1.3.6.1.4.1.171.12.34.3.2.1.13
Object
column
r/w
Enumeration
This object indicates the MLD version of this entry. If the MLD version is configured with a lower version, the higher version's MLD Report/Leave messages will be ignored.
Context
- MIB
- MLD-SNOOPING-MIB
- OID
.1.3.6.1.4.1.171.12.34.3.2.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swMldSnoopingCtrlEntry
- Table
- swMldSnoopingCtrlTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | version-1 |
2 | version-2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swMldSnoopingCtrlVid This object indicates the MLD control entry's VLAN ID. If the VLAN
is disabled, the VID is always 0 and cannot be changed by
management users. If VLAN is in Port-Base mode, the VI… | column | Integer32 | .1.3.6.1.4.1.171.12.34.3.2.1.1 |
| swMldSnoopingCurrentState This object indicates the current MLD query state. | column | Enumeration | .1.3.6.1.4.1.171.12.34.3.2.1.10 |
| swMldSnoopingCtrlState This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different for eac… | column | Enumeration | .1.3.6.1.4.1.171.12.34.3.2.1.11 |
| swMldSnoopingFastDoneState This object indicates the fast_leave status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are differ… | column | Enumeration | .1.3.6.1.4.1.171.12.34.3.2.1.12 |
| swMldSnoopingQueryInterval The frequency at which MLD Host-Query packets are
transmitted on this switch. | column | Integer32 | .1.3.6.1.4.1.171.12.34.3.2.1.2 |
| swMldSnoopingMaxResponseTime The maximum query response time on this switch. | column | Integer32 | .1.3.6.1.4.1.171.12.34.3.2.1.3 |
| swMldSnoopingRobustness The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to have
a high loss, the Robustness Variable may be increased. MLD is
robus… | column | Integer32 | .1.3.6.1.4.1.171.12.34.3.2.1.4 |
| swMldSnoopingLastMemberQueryInterval The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages and is also the amount of time between
Group-… | column | Integer32 | .1.3.6.1.4.1.171.12.34.3.2.1.5 |
| swMldSnoopingHostTimeout The timer value for sending a MLD query packet when none were
sent by the host in the LAN. The timer works on a per-VLAN basis.
Our device will be activated to send a query messag… | column | Integer32 | .1.3.6.1.4.1.171.12.34.3.2.1.6 |
| swMldSnoopingRouteTimeout The Router Timeout is how long a host must wait after hearing
a Query before it sends any MLD messages. | column | Integer32 | .1.3.6.1.4.1.171.12.34.3.2.1.7 |
| swMldSnoopingDoneTimer When a querier receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries swMldSnoopingDoneTimer to the group
th… | column | Integer32 | .1.3.6.1.4.1.171.12.34.3.2.1.8 |
| swMldSnoopingQueryState This object decides if the MLD query is enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.171.12.34.3.2.1.9 |