MEF-R-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
104

bwProfileTable

table
.1.3.6.1.4.1.164.20.8.1.3.1 · 1 row entry · 13 columns
Open in standard view 
This table defines the MEF BW profile attributes. The profile can be
defined either directly to an entity i.e. UNI or EVC or per EVC.CoS as
follows:
          
UNI
When the BW profile is applied to a UNI, the ' CoSProfileIndex'
attribute's value must be set to 'none'.
          
EVC
When the BW profile is applied to an EVC, the ' nCoSProfileIndex'
attribute's value must be set to 'none'.
          
EVC.CoS
When the BW profile is applied to an EVC and CoS, the ' CoSProfileIndex'
attribute's value must be set to the
correct CoS ID.
          
A bandwidth profile outlines the service guarantees that the SP will provide
by defining traffic types and amounts of each traffic type that subscribers
can send into the SP's network.
bwProfileEntry entry .1.3.6.1.4.1.164.20.8.1.3.1.1
A conceptual row where each row contains one BW profile attributes.
Indexes
bwProfileID bwProfileIndex
Column Syntax OID
bwProfileID
This attribute defines the BW Profile ID. The BW profile ID must be
greater than '0'.
TCVTIdV2
Textual Convention: TCVTIdV2 Unsigned32
 .1.3.6.1.4.1.164.20.8.1.3.1.1.1
bwProfileIndex
This attribute defines the BW Profile index. The BW profile index is a
'running index' denoting more than one profile e.g. High & Low, specified
for this BW profile. The BW profile index must be greater than '0'.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.3.1.1.2
bwProfileRowStatus
This attribute is used to create a new row or to delete an existing row
in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.20.8.1.3.1.1.3
bwProfileCIR
This attribute defines the Committed Information Rate (CIR) BW.
CIR is the average rate up to which packets are marked Green.
KbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.3.1.1.4
bwProfileCBS
This attribute defines the Committed Burst Size (CBS) for the CoS.
CBS is the maximum number of bytes allowed for incoming packets to burst above CIR,
but still marked Green.
OctetsTCBurstSizeV2r/w
Textual Convention: TCBurstSizeV2 Unsigned32
 .1.3.6.1.4.1.164.20.8.1.3.1.1.5
bwProfileEIR
This attribute defines the Excessive Information Rate (EIR) BW.
The EIR is greater or equal to CIR. Packets that exceed the CIR
but are below the EIR are marked Yellow.
KbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.3.1.1.8
bwProfileEBS
This attribute defines the Excessive Burst Size (EBS) for the CoS.
EBS is the maximum number of bytes allowed for incoming packets to burst above EIR,
but still marked Yellow.
OctetsTCBurstSizeV2r/w
Textual Convention: TCBurstSizeV2 Unsigned32
 .1.3.6.1.4.1.164.20.8.1.3.1.1.9
bwProfileColorAware
This attribute defines whether the policing function assumes ingress
frames are already colored and must be treated, or not. This attribute
implements the MEF's Color Mode (CM) attribute.

true
Frames are …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.164.20.8.1.3.1.1.12
bwProfileColorAwareAdmissionOption
This attribute defines the admission options for Yellow Colored Frames.
A service may be defined to admit more yellow frames into the network
when the volume of the green frames does not consume all available CIR
bandwi…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.164.20.8.1.3.1.1.13
bwProfileName
This attribute defines the name assigned to BW profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.20.8.1.3.1.1.14
bwProfileGranularity
This attribute defines BW profile Granularity.
Enumerationr/w
Enumerated Values:
2r64kbps
3r1Mbps
4r10Mbps
5r100Mbps
 .1.3.6.1.4.1.164.20.8.1.3.1.1.15
bwProfilePolicedTraffic
This attribute defines the policed traffic type.
Enumerationr/w
Enumerated Values:
2all
3broadcast
4multicast
5unknownUnicast
6broadcastAndMulticast
7broadcastAndMulticastAndUnknownUnicast
 .1.3.6.1.4.1.164.20.8.1.3.1.1.16
bwProfileCompensation
This attribute defines the layer1 overhead (preamble and IFG) and the
overhead for the added VLAN header in case of stacking.
The compensation enable the policer to charge the bucket also for these overheads.
Using this…
OctetsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.3.1.1.17

envelopeBwProfileTable

table
.1.3.6.1.4.1.164.20.8.1.3.2 · 1 row entry · 7 columns
Open in standard view 
This table contains envelope bandwidth profiles as defined in
MEF 10.3 section 12.
envelopeBwProfileEntry entry .1.3.6.1.4.1.164.20.8.1.3.2.1
An entry in envelope BW profile table.

A row cannot be deleted if the profile is associated to a flow.

When a row is deleted all the corresponding rows in the
envelopeBwProfileCoSTable are auto…
Indexes
envelopeBwProfileIndex
Column Syntax OID
envelopeBwProfileIndex
A unique number as profile identifier.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.3.2.1.1
envelopeBwProfileName
A meaningful printable profile name.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.164.20.8.1.3.2.1.2
envelopeBwProfileRowStatus
This object enables creation and deletion of profiles.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.20.8.1.3.2.1.3
envelopeBwProfileCouplingFlagPolicy
Overall policy for the coupling flags.

When set to sharingExcessBw(2) or to uncoupledBwSharing(3) the
object envelopeBwProfileCouplingFlag0 is ignored and the object/s
envelopeBwProfileCosCouplingFlag are…
Enumerationr/w
Enumerated Values:
1manual
2sharingExcessBw
3uncoupledBwSharing
 .1.3.6.1.4.1.164.20.8.1.3.2.1.4
envelopeBwProfileCouplingFlag0
This parameter determines whether or not overflow tokens not used for
service frames declared Green can be used as Yellow tokens.

When set to 1 - Green tokens that are unconsumed by any CoS are
passed to …
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.164.20.8.1.3.2.1.5
envelopeBwProfileColorMode
The color mode that is used for the service.
Enumerationr/w
Enumerated Values:
1colorAware
2colorBlind
 .1.3.6.1.4.1.164.20.8.1.3.2.1.6
envelopeBwProfileCompensation
This attribute allows to take into consideration the overhead added
to transmitted frames e.g preamble, IFG, VLAN stacking.

The compensation enables the policer to charge the bucket also for
these overhea…
bytesUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.164.20.8.1.3.2.1.7

envelopeBwProfileCosTable

table
.1.3.6.1.4.1.164.20.8.1.3.3 · 1 row entry · 9 columns
Open in standard view 
This table contains envelope bandwidth profiles, at the CoS level.
envelopeBwProfileCosEntry entry .1.3.6.1.4.1.164.20.8.1.3.3.1
An entry in envelope BW profile CoS table.

When a row is created, the envelopeBwProfileIndex must point to an
already existing row of envelopeBwProfileTable.

A row cannot be deleted if the prof…
Indexes
envelopeBwProfileIndex envelopeBwProfileCosIndex
Column Syntax OID
envelopeBwProfileCosIndex
The CoS to which the configuration in this table applies.
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.20.8.1.3.3.1.1
envelopeBwProfileCosRowStatus
This object enables creation and deletion of CoS profiles.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.20.8.1.3.3.1.2
envelopeBwProfileCosCir
This attribute defines the average rate of service frames that are
declared Green by the BW profile.
kbpsSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.3.3.1.3
envelopeBwProfileCosCirMax
This attribute limits the rate of tokens added to the committed
token bucket (Green bucket).

The value of this object must be equal or greater than
envelopeBwProfileCosCir.
kbpsSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.3.3.1.4
envelopeBwProfileCosCbs
This attribute defines the maximum number of bytes available for a
burst of service frames sent at the UNI line rate that are declared
Green by the BW profile.
bytesSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.3.3.1.5
envelopeBwProfileCosEir
This attribute defines the average rate of service frames that are
declared Yellow by the BW profile.
kbpsSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.3.3.1.6
envelopeBwProfileCosEirMax
This attribute limits the rate of tokens added to the excess
token bucket (Yellow bucket).

The value of this object must be equal or greater than
envelopeBwProfileCosEir.
kbpsSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.3.3.1.7
envelopeBwProfileCosEbs
This attribute defines the maximum number of bytes available for a
burst of service frames sent at the UNI line rate that are declared
Yellow by the BW profile.
bytesSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.3.3.1.8
envelopeBwProfileCoSCouplingFlag
This parameter determines whether or not overflow tokens not used for
service frames declared Green can be used as Yellow tokens.

When set to 1 - unconsumed tokens are passed from the Green bucket to
the …
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.164.20.8.1.3.3.1.9

cPProfileTable

table
.1.3.6.1.4.1.164.20.8.1.4.1 · 1 row entry · 7 columns
Open in standard view 
This table defines the MEF CP attributes and behavior. It defines whether
a specific Control Protocol MAC address must be discarded, peered (i.e.
processed) or tunneled i.e. pushed forward). Note that a profile can
apply to either a UNI or an EVC and hence not all attributes apply to
both cases.
cPProfileEntry entry .1.3.6.1.4.1.164.20.8.1.4.1.1
A conceptual row where each row contains one CP attributes.
Indexes
cPProfileIndex cPProfileRunningIndex
Column Syntax OID
cPProfileIndex
Defines the CP Profile ID.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.164.20.8.1.4.1.1.1
cPProfileRunningIndex
This attribute defines a running index for each CP MAC address.
From value 0x4000001 (except 0x7FFFFFFF which indicates a default
entry in the CP Profile)this profile will be used for Layer 2 protocol
data units (PDUs)t…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.164.20.8.1.4.1.1.2
cPProfileRowStatus
This attribute is used to create a new row or to delete an existing row
in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.20.8.1.4.1.1.3
cPProfileMacAddress
This attribute defines the CP MAC address.
When cPProfileMacProcessing equals to macChangeTunnel(5),
this attribute defines the MAC address that replaces the
MAC address of the original protocols (default MAC Address
i…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.20.8.1.4.1.1.4
cPProfileMacProcessing
This attribute defines the CP MAC address processing:

ignore
Ignore the MAC address since this MAC address will be processed by
another 'rule' specified by e.g 'ceVlanId2EvcIngressMapMac'.

…
Enumerationr/w
Enumerated Values:
1ignore
2discard
3peer
4tunnel
5macChangeTunnel
 .1.3.6.1.4.1.164.20.8.1.4.1.1.5
cPProfileName
The name of the CP Profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.20.8.1.4.1.1.6
cPProfileProtocol
This attribute defines the Layer 2 protocol data units (PDUs)
that are tunneled through a network.Values that are different than
none(1) are relevant only for cPProfileRunningIndex greater than 0x4000000
(except 0x7FFFF…
Enumerationr/w
Enumerated Values:
1none
2efmOam
3portAuthentication
4lacp
5garp
6stp
7cdp
8vtp
9lldp
10pvstp
11pagp
14udld
15dtp
16loopback
 .1.3.6.1.4.1.164.20.8.1.4.1.1.7

l2cpStatTable

table
.1.3.6.1.4.1.164.20.8.1.4.2 · 1 row entry · 5 columns
Open in standard view 
This table shows L2CP statistics .Some protocols can be
distinguished by MAC,and some need parsing of other fields in addition to the MAC,
when more than one protocol uses the same MAC.
l2cpStatEntry entry .1.3.6.1.4.1.164.20.8.1.4.2.1
An entry in the L2CP Statistics Table.
Indexes
l2cpStatPortIndex l2cpStatProtocol l2cpStatMacAddress
Column Syntax OID
l2cpStatPortIndex
This object is an index of the specific port or interface.
For an interface, ifIndex will be used.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.164.20.8.1.4.2.1.1
l2cpStatProtocol
This object defines the Layer 2 protocol that is monitored .
none(1) means Not Applicable .
all(3) means total count of all the protocols that are transferred through
a specific port(l2cpStatPortIndex).
Enumeration
Enumerated Values:
1none
2other
3all
4efmOam
5portAuthentication
6lacp
7garp
8stp
9cdp
10vtp
11lldp
12pvstp
13pagp
14udld
15dtp
 .1.3.6.1.4.1.164.20.8.1.4.2.1.2
l2cpStatMacAddress
This object defines the MAC Address of the protocol that is monitored.
The address 00:00:00:00:00:00 means Not Applicable.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.20.8.1.4.2.1.3
l2cpStatEncapsulatedFrames
This attribute displays the counted encapsulated Frames,
before transferred via the provider's edge.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.4.2.1.4
l2cpStatDecapsulatedFrames
This attribute displays the counted decapsulated Frames.
These frames are retrieved to the original MAC after being encapsulated
at the other customer side they were sent from.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.4.2.1.5

uniTable

table
.1.3.6.1.4.1.164.20.8.1.5.1 · 1 row entry · 9 columns
Open in standard view 
This table defines the MEF UNI attributes.
uniEntry entry .1.3.6.1.4.1.164.20.8.1.5.1.1
A conceptual row where each row contains one UNI interface's
attributes.
Each row binds an Interface to a UNI.
Indexes
IF-MIBifIndex uniRunningIndex
Column Syntax OID
uniRunningIndex
This attribute defines a running (UNI)
index at the xNNI level.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.5.1.1.1
uniRowStatus
This attribute is used to create a new row or to delete an existing row
in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.20.8.1.5.1.1.2
uniLayer2CPProcessingProfile
This attribute defines the Layer 2 Control Protocol Processing profile
assigned to this UNI. If set to '0', no profile is assigned to this UNI.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.20.8.1.5.1.1.12
uniPerUniBWprofile
This attribute defines the BW profile assigned to this UNI. If set to '0',
no profile is assigned to this UNI.
TCVTIdV2r/w
Textual Convention: TCVTIdV2 Unsigned32
 .1.3.6.1.4.1.164.20.8.1.5.1.1.13
uniSpTagProtocolIdentifier
Determines the Tag Protocol Identifier.
Values:
8100 C-TAG
88a8 S-TAG.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.20.8.1.5.1.1.22
uniPacketColoring
Determines whether the packet's computed color will be marked on Egress TAG,
and if coloring will use DEI bit OR coloring will be based on
CoS+color --> SP-Priority conversion table.
Enumerationr/w
Enumerated Values:
1disabled
2deiColoring
3priorityLsbColoring
 .1.3.6.1.4.1.164.20.8.1.5.1.1.23
uniPerUniEgressAction
This attribute defines the action that should be taken
at the Egress side of this UNI.
Enumerationr/w
Enumerated Values:
1none
2addSpTag
 .1.3.6.1.4.1.164.20.8.1.5.1.1.27
uniQueueGroupName
This attribute points to a queueGroupName of queueGroupTable.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.20.8.1.5.1.1.33
uniClassifierKey
This bit map defines port classifier capabilities.
Bitsr/w
Enumerated Values:
0vlan
1innerVlan
2pBit
3ipPrecedence
4ipDscp
5srcIpAddr
6destIpAddr
7legacy
8dscp
9macSrcAddr
10macDestAddr
11etherType
12myMac
13untagged
 .1.3.6.1.4.1.164.20.8.1.5.1.1.36

flowTable

table
.1.3.6.1.4.1.164.20.8.1.6.3 · 1 row entry · 44 columns
Open in standard view 
This table defines the MEF Flow attributes.
flowEntry entry .1.3.6.1.4.1.164.20.8.1.6.3.1
A conceptual row where each row contains one flow attributes.
Indexes
flowIdx1 flowIdx2
Column Syntax OID
flowIdx1
This attribute defines a unique Flow.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.1
flowIdx2
This attribute defines the type of the Bidirectional flow
1 - not in use (default - base flow)
201 - reverse flow
301 - via-1 flow
302 - via-2 flow
401 - Mirror-1
402 - Mirror-2
403 - Mirror-3
404 - Mirror-4
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.2
flowName
This attribute defines a unique name assigned to the flow.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.20.8.1.6.3.1.3
flowRowStatus
This attribute is used to create/delete rows of the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.20.8.1.6.3.1.4
flowBWprofile
This attribute defines the BW profile(s) assigned to this flow. If set to
'0', no profile is assigned to this flow.
TCVTIdV2r/w
Textual Convention: TCVTIdV2 Unsigned32
 .1.3.6.1.4.1.164.20.8.1.6.3.1.5
flowFixedCos
This attribute defines the queue mapping that will be assigned to the flow
in case it does not use the Marking profile assigned to the Uni.
A value of 255 means that the flow will use the marking value according
to the …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.6
flowCOSProfile
This attribute defines the CoS profile assigned to this flow.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.7
flowQBlock
This attribute defines the QBlock assigned to this flow. It can also
be used as a pointer to a row of qProfileTable.
ObjectIdentifierr/w .1.3.6.1.4.1.164.20.8.1.6.3.1.8
flowMappingProfile
This attribute defines the Mapping profile assigned to this flow.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.9
flowFixedMarking
This attribute defines the Marking value (0..63)
that will be assigned to the flow in case it does not use the
Marking profile.It is used only when add/push action is performed.
A value of 255 means that the flow will u…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.10
flowMarkingProfile
This attribute defines the Marking profile assigned to this flow.
It is used only when add/push action is performed.
In case of 'Copy',the value will be 2^32-1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.11
flowOuterVlanTagging
This attribute determines the behavior of the flow regarding it's
Outer VLAN (the first after MAC Address):
add - add VLAN to the frame at the Egress
preserve - use the VLAN of the frame as the SP VLAN at the Egress
rem…
Enumerationr/w
Enumerated Values:
1add
2overwrite
3preserve
4remove
 .1.3.6.1.4.1.164.20.8.1.6.3.1.12
flowOuterVlan
This attribute defines the VLAN ID that is assigned in case that
flowOuterVlanTagging value is add(1).
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.13
flowInnerVlanTagging
This attribute determines the behavior of the flow regarding it's
Inner VLAN (the second after MAC Address):
add - add VLAN to the frame at the Egress
preserve - use the VLAN of the frame as the SP VLAN at the Egress.
r…
Enumerationr/w
Enumerated Values:
1add
2overwrite
3preserve
4remove
 .1.3.6.1.4.1.164.20.8.1.6.3.1.14
flowInnerVlan
This attribute defines the VLAN ID that is assigned to the frame in
case that flowInnerVlanTagging value is add(1).
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.15
flowEgressPort
This attribute defines the egress port that is assigned to this flow.
This value can represent also the slot/port in relevant devices.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.16
flowIngressPort
This attribute defines the ingress port that is assigned to this flow.
This value can represent also the slot/port in relevant devices.

For a port-classifier flow i.e. when the value of flowClassiferType …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.17
flowInnerFixedMarking
This attribute defines the Inner Marking value (0..63)
that will be assigned to the flow in case it does not use the
Marking profile.It is used only when add/push action is performed.
A value of 255 means that the flow …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.18
flowInnerMarkingProfile
This attribute defines the Inner Marking profile assigned to this flow.
It is used only when add/push action is performed.
In case of 'Copy',the value will be 2^32-1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.19
flowDropAction
This attribute defines whether All the frames classified to this flow will be dropped.
enable(3)=Drop Action.
Enumerationr/w
Enumerated Values:
1notApplicable
2disable
3enable
 .1.3.6.1.4.1.164.20.8.1.6.3.1.20
flowPriority
This attribute defines the priority of the flow in case that more than one flow
is associated with same specific Ingress Port.
0-Lowest priority.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.21
flowMarkOuterFixedMarking
This attribute defines the outer Marking value (0..63)
that will be assigned to the flow in case it does not use the
Marking profile.It is used only when mark=swap action is performed.
A value of 255 means that the flow…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.22
flowMarkOuterMarkingProfile
This attribute defines the outer Marking profile assigned to this flow.
It is used only when mark=swap action is performed.
In case of 'Copy',the value will be 2^32-1.
Applicable only when flowMarkOuterVlanTagging
value…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.23
flowMarkInnerFixedMarking
This attribute defines the Inner Marking value (0..63)
that will be assigned to the flow in case it does not use the
Inner Marking profile.It is used only when mark=swap action is performed.
A value of 255 means that t…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.24
flowMarkInnerMarkingProfile
This attribute defines the Inner Marking profile assigned to this flow.
It is used only when mark=swap action is performed.
In case of 'Copy',the value will be 2^32-1.Applicable only when flowMarkInnerVlanTagging
value …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.25
flowMarkOuterVlanTagging
This attribute determines the marking action of the flow
regarding its Outer VLAN (the first after MAC Address).
Bitsr/w
Enumerated Values:
0overwritePbit
1overwriteVlan
2overwriteEtherType
 .1.3.6.1.4.1.164.20.8.1.6.3.1.26
flowMarkOuterVlan
This attribute defines the VLAN ID that is assigned in case that
flowMarkOuterVlanTagging value is overwriteVlan(1).
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.27
flowMarkInnerVlanTagging
This attribute determines the marking action of the flow
regarding it's Inner VLAN (the second after MAC Address).
Bitsr/w
Enumerated Values:
0overwritePbit
1overwriteVlan
2overwriteEtherType
 .1.3.6.1.4.1.164.20.8.1.6.3.1.28
flowMarkInnerVlan
This attribute defines the VLAN ID that is assigned in case that
flowMarkInnerVlanTagging value is overwriteVlan(1).
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.29
flowPolicerAggregate
This parameter defines the group of the Policer Aggregate
(agnGroupIdx from agnGroupTable when agnGroupCnfgIdx=2 and agnGroupComponentIdx=0xFFFF ).
The value 0 means that no group/policer aggregate is connected to the f…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.30
flowMarkMacTagging
This attribute determines the behavior (marking action)of the flow regarding its
MAC Address.
Bitsr/w
Enumerated Values:
0swapMacSrcAndDst
1overwriteSrcMac
2overwriteDstMac
 .1.3.6.1.4.1.164.20.8.1.6.3.1.32
flowMarkIpTagging
This attribute determines the behavior (marking action)of flow regarding its
IP Address.
Bitsr/w
Enumerated Values:
0swapIpSrcAndDst
1overwriteSrcIp
2overwriteDstIp
 .1.3.6.1.4.1.164.20.8.1.6.3.1.33
flowLayer2CPProcessingProfile
This attribute defines the L2CP Processing profile assigned
to this flow. If set to '0', no profile is assigned.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.38
flowIngressColorMapping
This attribute defines the flow ingress color mapping:
'green' and 'yellow' defines color directly
'colorProfile' defines color profile according to the
.
Enumerationr/w
Enumerated Values:
1green
2yellow
255colorProfile
 .1.3.6.1.4.1.164.20.8.1.6.3.1.39
flowIngressColorProfile
This attribute defines the ingress color profile assigned
to this flow. If set to '0', no profile is assigned.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.40
flowCosMapping
This attribute defines flow CoS mapping.

The value 0..7 indicates fixed CoS selection.

The value 255 defines using of flowCosMappingProfile
OBJECT belonging to this table (see below).
…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.41
flowCosMappingProfile
This attribute defines CoS mapping profile assigned
to this flow.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.42
flowStatus
This object displays the flow status.
Bit 0 = '1' denotes that operational state of the flow is OK.
This bit duplicates the flow ifOperStatus. It allows to
get all status information by one access.
Bit 1…
Bits
Enumerated Values:
0operStat
1adminStatDown
2ingressOperStatNotUp
3egressOperStatNotUp
4test
5lackOfResources
6cfmOamFailure
7y1564Test
8rfc2544Test
9mef46Loop
 .1.3.6.1.4.1.164.20.8.1.6.3.1.47
flowServiceIdName
This attribute defines the Service ID name of this flow,
if the flow is not associated with a Service the value is null.
Upon setting a value, the agent creates an entry in
serviceIdTable table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.164.20.8.1.6.3.1.49
flowPolicerType
This attribute defines the type of the policer (i.e. BW profile type)
that is attached to the flow.

regular(2) - the BW profile is indicated by flowBWprofile that
points to an entry in bw…
Enumerationr/w
Enumerated Values:
1none
2regular
3aggregate
4envelope
5regularAccountingOnly
 .1.3.6.1.4.1.164.20.8.1.6.3.1.51
flowMultiCosCounters
This attribute defines a list of CoS values to which flow counters
are allocated.

This object is relevant only when flowPolicerType is set to none(1).
Bitsr/w
Enumerated Values:
0cos0
1cos1
2cos2
3cos3
4cos4
5cos5
6cos6
7cos7
 .1.3.6.1.4.1.164.20.8.1.6.3.1.52
flowClassifierType
This attribute defines the type of the classifier used.
Enumerationr/w
Enumerated Values:
1flowClassifier
2portClassifier
 .1.3.6.1.4.1.164.20.8.1.6.3.1.53
flowIngressPortClassifier
This attribute indicates the ingress port that is indirectly assigned
to this flow (via a corresponding rule in a port classifier).

When the ingress port is not known the value zero is returned.
…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.164.20.8.1.6.3.1.54
flowDscpMarkingProfile
This attribute defines the DSCP marking profile assigned to this flow.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.3.1.55

serviceIdTable

table
.1.3.6.1.4.1.164.20.8.1.6.4.2 · 1 row entry · 4 columns
Open in standard view 
This table map flows to a service (EVC).
Rows in this table are created by agent when:
flowServiceId is set, or
erpVlanServiceIdName is set, or
for each entry in serviceIdCmdTable.
serviceIdEntry entry .1.3.6.1.4.1.164.20.8.1.6.4.2.1
Entry in the serviceIdTable.
Indexes
serviceIdName serviceIdRowPointer
Column Syntax OID
serviceIdName
This attribute defines a unique service identification.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.164.20.8.1.6.4.2.1.1
serviceIdRowPointer
This attribute holds the OID of the entity that associate.
with the Service.
For the flowTable the serviceIdRowPointer shall point to agnStringToIndexTable.
SNMPv2-TCRowPointer
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.164.20.8.1.6.4.2.1.2
serviceIdEntityType
This attribute specify the type of the entity in a service.
Enumeration
Enumerated Values:
1flow
2erpVlan
3ma
 .1.3.6.1.4.1.164.20.8.1.6.4.2.1.3
serviceIdRowStatus
This attribute is used to create a new row or to delete an existing row
in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.20.8.1.6.4.2.1.5

serviceIdCmdTable

table
.1.3.6.1.4.1.164.20.8.1.6.4.3 · 1 row entry · 4 columns
Open in standard view 
This table display the configuration parameters of
the Service automatic command.
for each entry in this table the agent shall create
an entry in serviceIdTable.
serviceIdCmdEntry entry .1.3.6.1.4.1.164.20.8.1.6.4.3.1
Entry in the serviceIdCfmTable.
Indexes
serviceIdName
Column Syntax OID
serviceIdCmdRowStatus
This RowStatus is used to create a row in the table
possible value of the RowStatus are active(1), createAndGo(4).
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.20.8.1.6.4.3.1.1
serviceIdCmdVlan
This attribute represent the (outer) VLAN of the Service.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.4.3.1.2
serviceIdCmdInnerVlan
This attribute represent the (inner) VLAN of the Service.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.4.3.1.3
serviceIdCmdPortIdx
This attribute represent the port (ifIndex) of the Service.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.4.3.1.4

pmFlowCmdTable

table
.1.3.6.1.4.1.164.20.8.1.6.6 · 1 row entry · 2 columns
Open in standard view 
Table that holds a set of scalars as columns.
pmFlowCmdEntry entry .1.3.6.1.4.1.164.20.8.1.6.6.1
An entry in table.
Indexes
pmFlowCmdIndex
Column Syntax OID
pmFlowCmdIndex
This object used as index value=1.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.8.1.6.6.1.1
pmFlowCmdWithOAMTraffic
This command is related to flow counters behavior.
the action will be at the device level for all flows measurements to
include or exclude the OAM traffic from the service traffic.
yes(2) - command to include the OAM t…
Enumerationr/w
Enumerated Values:
2yes
3no
 .1.3.6.1.4.1.164.20.8.1.6.6.1.2