flowStatus
MEF-R-MIB ·
.1.3.6.1.4.1.164.20.8.1.6.3.1.47
Object
column
Bits
This object displays the flow status.
Bit 0 = '1' denotes that operational state of the flow is OK.
This bit duplicates the flow ifOperStatus. It allows to
get all status information by one access.
Bit 1 = '1' denotes that the administrative state of the flow is
'down'.
Bit 2 = '1' denotes that ifOperStatus of the flow ingress
port is not 'up'.
Bit 3 = '1' denotes that ifOperStatus of the flow egress
port is not 'up'.
Bit 4 = '1' denotes that loopback test of the flow is activate.
Bit 5 = '1' denotes that flow was not set up due to lack
of internal resources.
Bit 6 = '1' denotes that the device is not receiving CFM OAM
messages on this flow.
Bit 7 = '1' denotes that the flow is under Y.1564 test.
Bit 8 = '1' denotes that the flow is under RFC2544 test.
Bit 9 = '1' denotes that the flow is under MEF46 Latching
Loopback.
Syntax
Bits
Values & Constraints
Enumerated Values
0 | operStat |
1 | adminStatDown |
2 | ingressOperStatNotUp |
3 | egressOperStatNotUp |
4 | test |
5 | lackOfResources |
6 | cfmOamFailure |
7 | y1564Test |
8 | rfc2544Test |
9 | mef46Loop |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| flowIdx1 This attribute defines a unique Flow. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.1 |
| flowFixedMarking This attribute defines the Marking value (0..63)
that will be assigned to the flow in case it does not use the
Marking profile.It is used only when add/push action is performed.
A… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.10 |
| flowMarkingProfile This attribute defines the Marking profile assigned to this flow.
It is used only when add/push action is performed.
In case of 'Copy',the value will be 2^32-1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.11 |
| flowOuterVlanTagging This attribute determines the behavior of the flow regarding it's
Outer VLAN (the first after MAC Address):
add - add VLAN to the frame at the Egress
preserve - use the VLAN of th… | column | Enumeration | .1.3.6.1.4.1.164.20.8.1.6.3.1.12 |
| flowOuterVlan This attribute defines the VLAN ID that is assigned in case that
flowOuterVlanTagging value is add(1). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.13 |
| flowInnerVlanTagging This attribute determines the behavior of the flow regarding it's
Inner VLAN (the second after MAC Address):
add - add VLAN to the frame at the Egress
preserve - use the VLAN of t… | column | Enumeration | .1.3.6.1.4.1.164.20.8.1.6.3.1.14 |
| flowInnerVlan This attribute defines the VLAN ID that is assigned to the frame in
case that flowInnerVlanTagging value is add(1). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.15 |
| flowEgressPort This attribute defines the egress port that is assigned to this flow.
This value can represent also the slot/port in relevant devices. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.16 |
| flowIngressPort This attribute defines the ingress port that is assigned to this flow.
This value can represent also the slot/port in relevant devices.
For a port-classifier flow i… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.17 |
| flowInnerFixedMarking This attribute defines the Inner Marking value (0..63)
that will be assigned to the flow in case it does not use the
Marking profile.It is used only when add/push action is perfor… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.18 |
| flowInnerMarkingProfile This attribute defines the Inner Marking profile assigned to this flow.
It is used only when add/push action is performed.
In case of 'Copy',the value will be 2^32-1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.19 |
| flowIdx2 This attribute defines the type of the Bidirectional flow
1 - not in use (default - base flow)
201 - reverse flow
301 - via-1 flow
302 - via-2 flow
401 - Mirror-1
402 - Mirror-2… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.2 |
| flowDropAction This attribute defines whether All the frames classified to this flow will be dropped.
enable(3)=Drop Action. | column | Enumeration | .1.3.6.1.4.1.164.20.8.1.6.3.1.20 |
| flowPriority This attribute defines the priority of the flow in case that more than one flow
is associated with same specific Ingress Port.
0-Lowest priority. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.21 |
| flowMarkOuterFixedMarking This attribute defines the outer Marking value (0..63)
that will be assigned to the flow in case it does not use the
Marking profile.It is used only when mark=swap action is perfo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.22 |
| flowMarkOuterMarkingProfile This attribute defines the outer Marking profile assigned to this flow.
It is used only when mark=swap action is performed.
In case of 'Copy',the value will be 2^32-1.
Applicable … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.23 |
| flowMarkInnerFixedMarking This attribute defines the Inner Marking value (0..63)
that will be assigned to the flow in case it does not use the
Inner Marking profile.It is used only when mark=swap action i… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.24 |
| flowMarkInnerMarkingProfile This attribute defines the Inner Marking profile assigned to this flow.
It is used only when mark=swap action is performed.
In case of 'Copy',the value will be 2^32-1.Applicable o… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.25 |
| flowMarkOuterVlanTagging This attribute determines the marking action of the flow
regarding its Outer VLAN (the first after MAC Address). | column | Bits | .1.3.6.1.4.1.164.20.8.1.6.3.1.26 |
| flowMarkOuterVlan This attribute defines the VLAN ID that is assigned in case that
flowMarkOuterVlanTagging value is overwriteVlan(1). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.27 |
| flowMarkInnerVlanTagging This attribute determines the marking action of the flow
regarding it's Inner VLAN (the second after MAC Address). | column | Bits | .1.3.6.1.4.1.164.20.8.1.6.3.1.28 |
| flowMarkInnerVlan This attribute defines the VLAN ID that is assigned in case that
flowMarkInnerVlanTagging value is overwriteVlan(1). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.29 |
| flowName This attribute defines a unique name assigned to the flow. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.164.20.8.1.6.3.1.3 |
| flowPolicerAggregate This parameter defines the group of the Policer Aggregate
(agnGroupIdx from agnGroupTable when agnGroupCnfgIdx=2 and agnGroupComponentIdx=0xFFFF ).
The value 0 means that no group… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.30 |
| flowMarkMacTagging This attribute determines the behavior (marking action)of the flow regarding its
MAC Address. | column | Bits | .1.3.6.1.4.1.164.20.8.1.6.3.1.32 |
| flowMarkIpTagging This attribute determines the behavior (marking action)of flow regarding its
IP Address. | column | Bits | .1.3.6.1.4.1.164.20.8.1.6.3.1.33 |
| flowLayer2CPProcessingProfile This attribute defines the L2CP Processing profile assigned
to this flow. If set to '0', no profile is assigned. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.38 |
| flowIngressColorMapping This attribute defines the flow ingress color mapping:
'green' and 'yellow' defines color directly
'colorProfile' defines color profile according to the
. | column | Enumeration | .1.3.6.1.4.1.164.20.8.1.6.3.1.39 |
| flowRowStatus This attribute is used to create/delete rows of the table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.20.8.1.6.3.1.4 |
| flowIngressColorProfile This attribute defines the ingress color profile assigned
to this flow. If set to '0', no profile is assigned. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.40 |
| flowCosMapping This attribute defines flow CoS mapping.
The value 0..7 indicates fixed CoS selection.
The value 255 defines using of flowCosMappingProfile
OBJECT be… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.41 |
| flowCosMappingProfile This attribute defines CoS mapping profile assigned
to this flow. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.42 |
| flowServiceIdName This attribute defines the Service ID name of this flow,
if the flow is not associated with a Service the value is null.
Upon setting a value, the agent creates an entry in
servic… | column | OctetString | .1.3.6.1.4.1.164.20.8.1.6.3.1.49 |
| flowBWprofile This attribute defines the BW profile(s) assigned to this flow. If set to
'0', no profile is assigned to this flow. | column | TCVTIdV2 | .1.3.6.1.4.1.164.20.8.1.6.3.1.5 |
| flowPolicerType This attribute defines the type of the policer (i.e. BW profile type)
that is attached to the flow.
regular(2) - the BW profile is indicated by flowBWprofile that… | column | Enumeration | .1.3.6.1.4.1.164.20.8.1.6.3.1.51 |
| flowMultiCosCounters This attribute defines a list of CoS values to which flow counters
are allocated.
This object is relevant only when flowPolicerType is set to none(1). | column | Bits | .1.3.6.1.4.1.164.20.8.1.6.3.1.52 |
| flowClassifierType This attribute defines the type of the classifier used. | column | Enumeration | .1.3.6.1.4.1.164.20.8.1.6.3.1.53 |
| flowIngressPortClassifier This attribute indicates the ingress port that is indirectly assigned
to this flow (via a corresponding rule in a port classifier).
When the ingress port is not kno… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.164.20.8.1.6.3.1.54 |
| flowDscpMarkingProfile This attribute defines the DSCP marking profile assigned to this flow. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.55 |
| flowFixedCos This attribute defines the queue mapping that will be assigned to the flow
in case it does not use the Marking profile assigned to the Uni.
A value of 255 means that the flow will… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.6 |
| flowCOSProfile This attribute defines the CoS profile assigned to this flow. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.7 |
| flowQBlock This attribute defines the QBlock assigned to this flow. It can also
be used as a pointer to a row of qProfileTable. | column | ObjectIdentifier | .1.3.6.1.4.1.164.20.8.1.6.3.1.8 |
| flowMappingProfile This attribute defines the Mapping profile assigned to this flow. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.20.8.1.6.3.1.9 |