ME1200-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
110

me1200AclRateLimiterTable

table
.1.3.6.1.4.1.9.9.815.1.17.1.2.1.1 · 1 row entry · 4 columns
Open in standard view 
The ACL rate limiter configuration table.
me1200AclRateLimiterEntry entry .1.3.6.1.4.1.9.9.815.1.17.1.2.1.1.1
Each rate limiter ID has a set of parameters
Indexes
me1200AclRateLimiterId
Column Syntax OID
me1200AclRateLimiterId
The identification of ACL rate limter.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.1.1.1
me1200AclRateLimiterPacketRate
The packet rate per second. The operation is inactive when bit rate
mode is enabled. Possible values are: 0-99, 100, 2*100, 3*100...,
1092000.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.1.1.2
me1200AclRateLimiterBitRate
The bit rate per second.The operation is inactive when bit rate mode is
disabled. Possible values are: 0, 100, 2*100, 3*100, ..., 1000000.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.1.1.3
me1200AclRateLimiterBitRateEnable
Enable bit rate.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.1.1.4

me1200AclAceTable

table
.1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1 · 1 row entry · 86 columns
Open in standard view 
The ACL ACE configuration table.
me1200AclAceEntry entry .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1
Each row contains a set of parameters.
Indexes
me1200AclAceId
Column Syntax OID
me1200AclAceId
The identification of ACE.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.1
me1200AclAceNextAceId
The next identification for this ACE. Possible values are: 0(end of
list), 1-512.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.2
me1200AclAceLookup
The second lookup operation for this ACE. Possible values are:
1(enabled) and 2(disabled).
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.3
me1200AclAceIngressPortList
The ingress port list for this ACE. Each octet within this value
specifies a set of eight ports, with the first octet specifying ports 1
through 8, the second octet specifying ports 9 through 16, etc. Within
each octet,…
ME1200-TCME1200PortListr/w
Textual Convention: ME1200-TCME1200PortList OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.5
me1200AclAcePolicyValue
The policy number for this ACE. The feature is inactive when policy
mask value is non-zero.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.6
me1200AclAcePolicyMask
The policy number for this ACE. The feature is inactive when policy
mask value is non-zero.
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.7
me1200AclAceHitAction
The hit action operation for this ACE. Note all ports will be the
filter port member when filter action is set on the first time.
ME1200AclAceHitActionr/w
Textual Convention: ME1200AclAceHitAction Enumeration
Type Values:
0deny
1permit
2filter
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.8
me1200AclAceFilterPortList
The filter port list. It is active only when the hit action is
filtered. Set the action value to 0(filter) before the new setting.
Note that the action will change deny action if there is no any port in
the member set. …
ME1200-TCME1200PortListr/w
Textual Convention: ME1200-TCME1200PortList OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.9
me1200AclAceRateLimiterId
The rate limiter ID. Possible values are: 0(disabled), 1-16.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.10
me1200AclAceEvcPolicerId
The EVC policer ID. Possible values are: 0(disabled), 1-1022.
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.11
me1200AclAceRedirectPortList
The ingress port list for this ACE. It is active only when the hit
action is denied. Set the action value to 1(deny) before the new
setting. Set value 0 to disable the opertion. Each octet within this
value specifies a …
ME1200-TCME1200PortListr/w
Textual Convention: ME1200-TCME1200PortList OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.12
me1200AclAceMirror
The rmirror operation. Frames matching this ACE are mirrored to the
destination mirror port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.13
me1200AclAceLogging
The logging operation.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.14
me1200AclAceShutdown
The shutdown operation.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.15
me1200AclAceVlanTagged
The 802.1Q VLAN tagged for this ACE.
ME1200VlanTaggedr/w
Textual Convention: ME1200VlanTagged Enumeration
Type Values:
0any
1untagged
2tagged
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.100
me1200AclAceVlanId
The VLAN ID for this ACE. Possible values are: 0(disabled), 1-4095.
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.101
me1200AclAceVlanTagPriority
The VLN tag priority for this ACE. Enable VLAN tagged filter before the
new setting.
ME1200VlanTagPriorityr/w
Textual Convention: ME1200VlanTagPriority Enumeration
Type Values:
0any
1value0
2value1
3value2
4value3
5value4
6value5
7value6
8value7
9range0to1
10range2to3
11range4to5
12range6to7
13range0to3
14range4to7
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.102
me1200AclAceFrameType
The frame type for this ACE.
ME1200AclAceTyper/w
Textual Convention: ME1200AclAceType Enumeration
Type Values:
0any
1etype
4arp
5ipv4
6ipv6
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.200
me1200AclAceEtypeSrcMacOp
Indicates how a Ethernet type packet's source MAC address is to be
compared. This object can only be configured if FrameType is etype(1).
ME1200ASTyper/w
Textual Convention: ME1200ASType Enumeration
Type Values:
0any
1specific
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.300
me1200AclAceEtypeSrcMac
Indicates the 48 bits source MAC address. This object can only be
configured if FrameType is etype(1) and EtypeSrcMacOp is specific(1).
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.301
me1200AclAceEtypeDestMacOp
Indicates how a Ethernet type packet's destination MAC address is to be
compared. This object can only be configured if FrameType is etype(1).
ME1200AdvDestMacTyper/w
Textual Convention: ME1200AdvDestMacType Enumeration
Type Values:
0any
1unicast
2multicast
3broadcast
4specific
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.302
me1200AclAceEtypeDestMac
Indicates the 48 bits destination MAC address. This object can only be
configured if FrameType is etype(1) and EtypeDestMacOp is specific(1).
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.303
me1200AclAceEtype
Indicates the packet's 16 bit Ethernet type field. Possible values are:
0(disabled), 0x600-0xFFFF but excluding 0x800(IPv4), 0x806(ARP) and
0x86DD(IPv6).This object can only be configured if FrameType is
etype(1) and Et…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.304
me1200AclAceArpSrcMacOp
Indicates how a ARP packet's source MAC address is to be compared. This
object can only be configured if FrameType is arp(4).
ME1200ASTyper/w
Textual Convention: ME1200ASType Enumeration
Type Values:
0any
1specific
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.600
me1200AclAceArpSrcMac
Indicates the 48 bits source MAC address. This object can only be
configured if FrameType is arp(4) and ArpSrcMacOp is specific(1).
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.601
me1200AclAceArpDestMacOp
Indicates how a ARP packet's destination MAC address is to be compared.
This object can only be configured if FrameType is arp(4).
ME1200DestMacTyper/w
Textual Convention: ME1200DestMacType Enumeration
Type Values:
0any
1unicast
2multicast
3broadcast
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.602
me1200AclAceArpSenderIp
The specified ARP sender IP address. The packets sender address is
AND-ed with the value of ArpSenderIpMask and then compared with the
value of this object. If ArpSenderIp and ArpSrcIpMask are 0.0.0.0, this
entry matche…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.603
me1200AclAceArpSenderIpMask
The specified ARP sender IP address mask. This object can only be
configured if FrameType is arp(4).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.604
me1200AclAceArpTragetIp
The specified ARP target IP address. The packets target address is
AND-ed with the value of ArpTragetIpMask and then compared with the
value of this object. If ArpTragetIp and ArpSrcIpMask are 0.0.0.0, this
entry matche…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.605
me1200AclAceArpTragetIpMask
The specified ARP target IP address mask. This object can only be
configured if FrameType is arp(4).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.606
me1200AclAceArpOpcode
Indicates how a ARP packet's opcode is to be compared. This object can
only be configured if FrameType is arp(4).
ME1200ArpOpcoder/w
Textual Convention: ME1200ArpOpcode Enumeration
Type Values:
0any
1arp
2rarp
3other
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.607
me1200AclAceArpFlagRequest
Indicates how a ARP packet's request/reply opcode is to be compared.
The value 0 means any ARP opcode is allowed (don't-care field), value 1
means ARP opcode is equal to request opcode and value 2 means ARP
opcode is eq…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.608
me1200AclAceArpFlagSenderMac
Indicates how a ARP packet's sender hardware address field (SHA) is to
be compared. The value 0 means any SHA value is allowed (don't-care
field), value 1 means SHA is not equal to the SMAC address and value 2
means SHA…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.609
me1200AclAceArpFlagTargetMac
Indicates how a ARP packet's target hardware address field (THA) is to
be compared. The value 0 means any THA value is allowed (don't-care
field), value 1 means THA is not equal to the DMAC address and value 2
means THA…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.610
me1200AclAceArpFlagLen
Indicates how a ARP packet's s hardware address length field (HLN) is
to be compared. The value 0 means any HLN value is allowed (don't-care
field), value 1 means HLN is not equal to Ethernet (0x06) or the (PLN)
is not …
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.611
me1200AclAceArpFlagIp
Indicates how a ARP packet's hardware address space field (HRD) is to
be compared. The value 0 means any HRD value is allowed (don't-care
field), value 1 means HRD is not equal to Ethernet (1) and value 2
means HRD is e…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.612
me1200AclAceArpFlagEthernet
Indicates how a ARP packet's protocol address space field (PRO) is to
be compared. The value 0 means any PRO value is allowed (don't-care
field), value 1 means PRO is not equal to IP (0x800) and value 2 means
PRO is equ…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.613
me1200AclAceIpv4DestMacOp
Indicates how a IPv4 packet's destination MAC address is to be
compared. This object can only be configured if FrameType is ipv4(5).
ME1200DestMacTyper/w
Textual Convention: ME1200DestMacType Enumeration
Type Values:
0any
1unicast
2multicast
3broadcast
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.700
me1200AclAceIpv4ProtocolOp
Indicates how a IPv4 packet's protocol field is to be compared. This
object can only be configured if FrameType is ipv4(5).
ME1200ASTyper/w
Textual Convention: ME1200ASType Enumeration
Type Values:
0any
1specific
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.701
me1200AclAceIpv4Protocol
The protocol number field in the IPv4 header used to indicate a higher
layer protocol. Possible values are 0-255.This object can only be
configured if FrameType is ipv4(5) and Ipv4ProtocolOp is specific(1).
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.702
me1200AclAceIpv4FlagTtl
Indicates how a IPv4 packet's Time-to-Live field (TTL) is to be
compared. The value 0 means any TTL value is allowed (don't-care
field), value 1 means TTL is not equal zero and value 2 means TTL is
equal to zero. This o…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.703
me1200AclAceIpv4FlagFragment
Indicates how a IPv4 packet's More-Fragments field (MF) is to be
compared. The value 0 means any MF value is allowed (don't-care field),
value 1 means MF is not equal one (MF field isn't set) and value 2
means MF is equ…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.704
me1200AclAceIpv4FlagIpOption
Indicates how a IPv4 packet's options field is to be compared. The
value 0 means any options is allowed (don't-care field), value 1 means
options is not equal one (options field isn't set) and value 2 means
options is e…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.705
me1200AclAceIpv4SrcIp
The specified source IPv4 address. The packets sender address is AND-ed
with the value of Ipv4SrcIpMask and then compared with the value of
this object. If Ipv4SrcIp and Ipv4SrcIpMask are 0.0.0.0, this entry
matches any…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.706
me1200AclAceIpv4SrcIpMask
The specified source IPv4 address mask. This object can only be
configured if FrameType isipv4(5).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.707
me1200AclAceIpv4DestIp
The specified destination IPv4 address. The packets sender address is
AND-ed with the value of Ipv4DestIpMask and then compared with the
value of this object. If Ipv4DestIp and Ipv4DestIpMask are 0.0.0.0,
this entry mat…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.708
me1200AclAceIpv4DestIpMask
The specified destination IPv4 address mask. This object can only be
configured if FrameType isipv4(5).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.709
me1200AclAceIpv4IcmpTypeOp
Indicates how a IPv4 packet's ICMP type field is to be compared. This
object can only be configured if FrameType is ipv4(5) and Ipv4Protocol
is icmp(1).
ME1200ASTyper/w
Textual Convention: ME1200ASType Enumeration
Type Values:
0any
1specific
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.710
me1200AclAceIpv4IcmpType
The ICMP type field in the IPv4 header. Possible values are 0-255.This
object can only be configured if FrameType is ipv4(5), Ipv4Protocol is
icmp(1) and Ipv4IcmpTypeOp is specific(1).
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.711
me1200AclAceIpv4IcmpCodeOp
Indicates how a IPv4 packet's ICMP code field is to be compared. This
object can only be configured if FrameType is ipv4(5) and Ipv4Protocol
is icmp(1).
ME1200ASTyper/w
Textual Convention: ME1200ASType Enumeration
Type Values:
0any
1specific
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.712
me1200AclAceIpv4IcmpCode
The ICMP code field in the IPv4 header. Possible values are 0-255.This
object can only be configured if FrameType is ipv4(5), Ipv4Protocol is
icmp(1) and Ipv4IcmpCodeOp is specific(1).
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.713
me1200AclAceIpv4SrcPortOp
Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv4(5).
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.714
me1200AclAceIpv4SrcPort
The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.715
me1200AclAceIpv4SrcPortRange
The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be c…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.716
me1200AclAceIpv4DestPortOp
Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv4(5).
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.717
me1200AclAceIpv4DestPort
The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can o…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.718
me1200AclAceIpv4DestPortRange
The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can onl…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.719
me1200AclAceIpv4TcpFlagFin
Indicates how a IPv4 TCP packet's 'No more data from sender' field
(FIN) is to be compared. The value 0 means any FIN value is allowed
(don't-care field), value 1 means FIN is not equal one (FIN field isn't
set) and val…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.720
me1200AclAceIpv4TcpFlagSyn
Indicates how a IPv4 TCP packet's 'Synchronize sequence numbers' field
(SYN) is to be compared. The value 0 means any SYN value is allowed
(don't-care field), value 1 means SYN is not equal one (FIN field isn't
set) and…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.721
me1200AclAceIpv4TcpFlagRst
Indicates how a IPv4 TCP packet's 'Reset the connection' field (RST) is
to be compared. The value 0 means any RST value is allowed (don't-care
field), value 1 means RST is not equal one (FIN field isn't set) and
value 2…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.722
me1200AclAceIpv4TcpFlagPsh
Indicates how a IPv4 TCP packet's 'Push Function' field (PSH) is to be
compared. The value 0 means any PSH value is allowed (don't-care
field), value 1 means PSH is not equal one (FIN field isn't set) and
value 2 means …
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.723
me1200AclAceIpv4TcpFlagAck
Indicates how a IPv4 TCP packet's 'Acknowledgment field significant'
field (ACK) is to be compared. The value 0 means any FIN value is
allowed (don't-care field), value 1 means ACK is not equal one (FIN
field isn't set)…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.724
me1200AclAceIpv4TcpFlagUrg
Indicates how a IPv4 TCP packet's 'Urgent Pointer field significant'
field (URG) is to be compared. The value 0 means any URG value is
allowed (don't-care field), value 1 means URG is not equal one (FIN
field isn't set)…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.725
me1200AclAceIPv6DestMacOp
Indicates how a IPv6 packet's destination MAC address is to be
compared. This object can only be configured if FrameType is arp(4).
ME1200DestMacTyper/w
Textual Convention: ME1200DestMacType Enumeration
Type Values:
0any
1unicast
2multicast
3broadcast
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.800
me1200AclAceIpv6NextHeaderOp
Indicates how a IPv6 packet's next header field is to be compared. This
object can only be configured if FrameType is ipv6(6).
ME1200ASTyper/w
Textual Convention: ME1200ASType Enumeration
Type Values:
0any
1specific
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.801
me1200AclAceIpv6NextHeader
The next header field in the IPv6 header used to indicate a higher
layer protocol. Possible values are 0-255.This object can only be
configured if FrameType is ipv6(6) and Ipv6NextHeaderOp is specific(1).
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.802
me1200AclAceIpv6SrcIp
The specified IPv6 source address. The packets source address is AND-ed
with the value of Ipv6SrcIpMask and then compared with the value of
this object. If Ipv6SrcIp and Ipv6SrcIpMask are all zeros, this entry
matches a…
INET-ADDRESS-MIBInetAddressIPv6r/w
Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.803
me1200AclAceIpv6SrcIpMask
The specified IPv6 source address mask. Only the least significant 32
bits of this object are used. This object can only be configured if
FrameType is ipv6(6).
INET-ADDRESS-MIBInetAddressIPv6r/w
Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.804
me1200AclAceIpv6FlagHopLimiter
Indicates how a IPv6 packet's hop limit field is to be compared. The
value 0 means any hop limit value is allowed (don't-care field), value
1 means hop limit is not equal zero and value 2 means hop limit is
equal to zer…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.805
me1200AclAceIpv6Icmpv6TypeOp
Indicates how a IPv6 packet's ICMPv6 type field is to be compared. This
object can only be configured if FrameType is ipv6(6) and
Ipv6NextHeader is icmpv6(58).
ME1200ASTyper/w
Textual Convention: ME1200ASType Enumeration
Type Values:
0any
1specific
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.806
me1200AclAceIpv6Icmpv6Type
The ICMPv6 type field in the IPv6 header. Possible values are
0-255.This object can only be configured if FrameType is ipv6(6),
Ipv6NextHeader is icmpv6(58) and Ipv6Icmpv6TypeOp is specific(1).
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.807
me1200AclAceIpv6Icmpv6CodeOp
Indicates how a IPv6 packet's ICMPv6 code field is to be compared. This
object can only be configured if FrameType is ipv6(6) and
Ipv6NextHeader is icmpv6(58).
ME1200ASTyper/w
Textual Convention: ME1200ASType Enumeration
Type Values:
0any
1specific
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.808
me1200AclAceIpv6Icmpv6Code
The ICMPv6 code field in the IPv6 header. Possible values are
0-255.This object can only be configured if FrameType is ipv6(6),
Ipv6NextHeader is icmpv6(58) and Ipv6Icmpv6CodeOp is specific(1).
ME1200-TCME1200Unsigned8r/w
Textual Convention: ME1200-TCME1200Unsigned8 Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.809
me1200AclAceIpv6SrcPortOp
Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv6(6).
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.810
me1200AclAceIpv6SrcPort
The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.811
me1200AclAceIpv6SrcPortRange
The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be c…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.812
me1200AclAceIpv6DestPortOp
Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv6(6).
ME1200ASRTyper/w
Textual Convention: ME1200ASRType Enumeration
Type Values:
0any
1specific
2range
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.813
me1200AclAceIpv6DestPort
The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can o…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.814
me1200AclAceIpv6DestPortRange
The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can onl…
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.815
me1200AclAceIpv6TcpFlagFin
Indicates how a IPv6 TCP packet's 'No more data from sender' field
(FIN) is to be compared. The value 0 means any FIN value is allowed
(don't-care field), value 1 means FIN is not equal one (FIN field isn't
set) and val…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.816
me1200AclAceIpv6TcpFlagSyn
Indicates how a IPv6 TCP packet's 'Synchronize sequence numbers' field
(SYN) is to be compared. The value 0 means any SYN value is allowed
(don't-care field), value 1 means SYN is not equal one (FIN field isn't
set) and…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.817
me1200AclAceIpv6TcpFlagRst
Indicates how a IPv6 TCP packet's 'Reset the connection' field (RST) is
to be compared. The value 0 means any RST value is allowed (don't-care
field), value 1 means RST is not equal one (FIN field isn't set) and
value 2…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.818
me1200AclAceIpv6TcpFlagPsh
Indicates how a IPv6 TCP packet's 'Push Function' field (PSH) is to be
compared. The value 0 means any PSH value is allowed (don't-care
field), value 1 means PSH is not equal one (FIN field isn't set) and
value 2 means …
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.819
me1200AclAceIpv6TcpFlagAck
Indicates how a IPv6 TCP packet's 'Acknowledgment field significant'
field (ACK) is to be compared. The value 0 means any FIN value is
allowed (don't-care field), value 1 means ACK is not equal one (FIN
field isn't set)…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.820
me1200AclAceIpv6TcpFlagUrg
Indicates how a IPv6 TCP packet's 'Urgent Pointer field significant'
field (URG) is to be compared. The value 0 means any URG value is
allowed (don't-care field), value 1 means URG is not equal one (FIN
field isn't set)…
ME1200AclAceFlagOpcoder/w
Textual Convention: ME1200AclAceFlagOpcode Enumeration
Type Values:
0any
1notequal
2equal
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.821
me1200AclAceAction
Action
ME1200-TCME1200RowEditorStater/w
Textual Convention: ME1200-TCME1200RowEditorState Unsigned32
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.1000

me1200AclAcePrecedenceTable

table
.1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.3 · 1 row entry · 2 columns
Open in standard view 
This table provides an overview of ACE by hit precedence.
me1200AclAcePrecedenceEntry entry .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.3.1
Each row contains a set of parameters.
Indexes
me1200AclAcePrecedencePrecedenceIndex
Column Syntax OID
me1200AclAcePrecedencePrecedenceIndex
The ACL ACE hit precedence.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.3.1.1
me1200AclAcePrecedenceAceId
The identification for this ACE. Possible values are: 0(end of list),
1-512.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.3.1.2

me1200AclInterfaceTable

table
.1.3.6.1.4.1.9.9.815.1.17.1.2.2.1 · 1 row entry · 10 columns
Open in standard view 
The ACL interface configuration table.
me1200AclInterfaceEntry entry .1.3.6.1.4.1.9.9.815.1.17.1.2.2.1.1
Each interface has a set of parameters
Indexes
me1200AclInterfaceIfIndex
Column Syntax OID
me1200AclInterfaceIfIndex
The index of logical interface, it is as well as the IF-MIB [RFC2863]
objects ifIndex.
ME1200-TCME1200InterfaceIndex
Textual Convention: ME1200-TCME1200InterfaceIndex Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.17.1.2.2.1.1.1
me1200AclInterfacePolicyId
The policy ID. Possible values are: 0-63.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.17.1.2.2.1.1.2
me1200AclInterfaceHitAction
The hit action.
ME1200AclInterfaceHitActionr/w
Textual Convention: ME1200AclInterfaceHitAction Enumeration
Type Values:
0deny
1permit
 .1.3.6.1.4.1.9.9.815.1.17.1.2.2.1.1.3
me1200AclInterfaceRateLimiterId
The rate limiter ID. Possible values are: 0(disabled), 1-16.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.17.1.2.2.1.1.4
me1200AclInterfaceEvcPolicerId
The EVC policer ID. Possible values are: 0(disabled), 1-1022.
ME1200-TCME1200Unsigned16r/w
Textual Convention: ME1200-TCME1200Unsigned16 Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.17.1.2.2.1.1.5
me1200AclInterfaceRedirectPortList
The ingress port list for this ACE. It is active only when the hit
action is denied. Set the action value to 1(deny) before the new
setting. Set value 0 to disable the opertion. Each octet within this
value specifies a …
ME1200-TCME1200PortListr/w
Textual Convention: ME1200-TCME1200PortList OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.9.9.815.1.17.1.2.2.1.1.6
me1200AclInterfaceMirror
The rmirror operation. Frames matching this ACE are mirrored to the
destination mirror port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.17.1.2.2.1.1.7
me1200AclInterfaceLogging
The logging operation.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.17.1.2.2.1.1.8
me1200AclInterfaceShutdown
The shutdown operation.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.17.1.2.2.1.1.9
me1200AclInterfaceState
The port state of this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.17.1.2.2.1.1.10

me1200AclAceStatusTable

table
.1.3.6.1.4.1.9.9.815.1.17.1.3.1.1 · 1 row entry · 4 columns
Open in standard view 
This table provides the ACE status in the hardware table.
me1200AclAceStatusEntry entry .1.3.6.1.4.1.9.9.815.1.17.1.3.1.1.1
Each row contains a set of parameters.
Indexes
me1200AclAceStatusPrecedenceIndex
Column Syntax OID
me1200AclAceStatusPrecedenceIndex
The ACL ACE hit precedence.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.17.1.3.1.1.1.2
me1200AclAceStatusUser
The application user of ACL.
ME1200AclUser
Textual Convention: ME1200AclUser Enumeration
Type Values:
0static
1ipSourceGuard
2ipmc
3evc
4mep
5arpInspection
6upnp
7ptp
8dhcp
9loopProtect
10linkOam
11ztp
12ttLoop
13y1564
 .1.3.6.1.4.1.9.9.815.1.17.1.3.1.1.1.3
me1200AclAceStatusAceId
The identification for this ACE. Possible values are: 0(end of list),
1-512.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.17.1.3.1.1.1.4
me1200AclAceStatusConflict
The conflict status of this ACE. When the status value is 1(true), it
means the specific ACE is not applied to the hardware due to hardware
limitations.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.815.1.17.1.3.1.1.1.5

me1200AclAceHitCountTable

table
.1.3.6.1.4.1.9.9.815.1.17.1.3.1.2 · 1 row entry · 2 columns
Open in standard view 
The ACL ACE hit count table.
me1200AclAceHitCountEntry entry .1.3.6.1.4.1.9.9.815.1.17.1.3.1.2.1
Each row has the hit count of ACE
Indexes
me1200AclAceHitCountAceId
Column Syntax OID
me1200AclAceHitCountAceId
The identification of ACE.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.17.1.3.1.2.1.1
me1200AclAceHitCountHitCount
The hit count of this ACE.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.17.1.3.1.2.1.2

me1200AclInterfaceHitCountTable

table
.1.3.6.1.4.1.9.9.815.1.17.1.3.2.1 · 1 row entry · 2 columns
Open in standard view 
The ACL interface hit count table.
me1200AclInterfaceHitCountEntry entry .1.3.6.1.4.1.9.9.815.1.17.1.3.2.1.1
Each row has the hit count of interface
Indexes
me1200AclInterfaceHitCountId
Column Syntax OID
me1200AclInterfaceHitCountId
The identification of ACE.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.17.1.3.2.1.1.1
me1200AclInterfaceHitCountHitCount
The hit count of this interface. The hit count will be increased if the
incoming frame doesn't hit any ACEs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.17.1.3.2.1.1.2