me1200AclAceIpv4SrcIp
ME1200-ACL-MIB ·
.1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.706
Object
The specified source IPv4 address. The packets sender address is AND-ed with the value of Ipv4SrcIpMask and then compared with the value of this object. If Ipv4SrcIp and Ipv4SrcIpMask are 0.0.0.0, this entry matches any source IP address. This object can only be configured if FrameType is ipv4(5).
Context
- MIB
- ME1200-ACL-MIB
- OID
.1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.706- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- me1200AclAceEntry
- Table
- me1200AclAceTable
- Siblings
- 85
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| me1200AclAceId The identification of ACE. | column | Integer32 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.1 |
| me1200AclAceRateLimiterId The rate limiter ID. Possible values are: 0(disabled), 1-16. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.10 |
| me1200AclAceVlanTagged The 802.1Q VLAN tagged for this ACE. | column | ME1200VlanTagged | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.100 |
| me1200AclAceAction Action | column | ME1200-TCME1200RowEditorState | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.1000 |
| me1200AclAceVlanId The VLAN ID for this ACE. Possible values are: 0(disabled), 1-4095. | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.101 |
| me1200AclAceVlanTagPriority The VLN tag priority for this ACE. Enable VLAN tagged filter before the
new setting. | column | ME1200VlanTagPriority | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.102 |
| me1200AclAceEvcPolicerId The EVC policer ID. Possible values are: 0(disabled), 1-1022. | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.11 |
| me1200AclAceRedirectPortList The ingress port list for this ACE. It is active only when the hit
action is denied. Set the action value to 1(deny) before the new
setting. Set value 0 to disable the opertion. E… | column | ME1200-TCME1200PortList | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.12 |
| me1200AclAceMirror The rmirror operation. Frames matching this ACE are mirrored to the
destination mirror port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.13 |
| me1200AclAceLogging The logging operation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.14 |
| me1200AclAceShutdown The shutdown operation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.15 |
| me1200AclAceNextAceId The next identification for this ACE. Possible values are: 0(end of
list), 1-512. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.2 |
| me1200AclAceFrameType The frame type for this ACE. | column | ME1200AclAceType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.200 |
| me1200AclAceLookup The second lookup operation for this ACE. Possible values are:
1(enabled) and 2(disabled). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.3 |
| me1200AclAceEtypeSrcMacOp Indicates how a Ethernet type packet's source MAC address is to be
compared. This object can only be configured if FrameType is etype(1). | column | ME1200ASType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.300 |
| me1200AclAceEtypeSrcMac Indicates the 48 bits source MAC address. This object can only be
configured if FrameType is etype(1) and EtypeSrcMacOp is specific(1). | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.301 |
| me1200AclAceEtypeDestMacOp Indicates how a Ethernet type packet's destination MAC address is to be
compared. This object can only be configured if FrameType is etype(1). | column | ME1200AdvDestMacType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.302 |
| me1200AclAceEtypeDestMac Indicates the 48 bits destination MAC address. This object can only be
configured if FrameType is etype(1) and EtypeDestMacOp is specific(1). | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.303 |
| me1200AclAceEtype Indicates the packet's 16 bit Ethernet type field. Possible values are:
0(disabled), 0x600-0xFFFF but excluding 0x800(IPv4), 0x806(ARP) and
0x86DD(IPv6).This object can only be co… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.304 |
| me1200AclAceIngressPortList The ingress port list for this ACE. Each octet within this value
specifies a set of eight ports, with the first octet specifying ports 1
through 8, the second octet specifying por… | column | ME1200-TCME1200PortList | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.5 |
| me1200AclAcePolicyValue The policy number for this ACE. The feature is inactive when policy
mask value is non-zero. | column | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.6 |
| me1200AclAceArpSrcMacOp Indicates how a ARP packet's source MAC address is to be compared. This
object can only be configured if FrameType is arp(4). | column | ME1200ASType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.600 |
| me1200AclAceArpSrcMac Indicates the 48 bits source MAC address. This object can only be
configured if FrameType is arp(4) and ArpSrcMacOp is specific(1). | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.601 |
| me1200AclAceArpDestMacOp Indicates how a ARP packet's destination MAC address is to be compared.
This object can only be configured if FrameType is arp(4). | column | ME1200DestMacType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.602 |
| me1200AclAceArpSenderIp The specified ARP sender IP address. The packets sender address is
AND-ed with the value of ArpSenderIpMask and then compared with the
value of this object. If ArpSenderIp and Arp… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.603 |
| me1200AclAceArpSenderIpMask The specified ARP sender IP address mask. This object can only be
configured if FrameType is arp(4). | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.604 |
| me1200AclAceArpTragetIp The specified ARP target IP address. The packets target address is
AND-ed with the value of ArpTragetIpMask and then compared with the
value of this object. If ArpTragetIp and Arp… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.605 |
| me1200AclAceArpTragetIpMask The specified ARP target IP address mask. This object can only be
configured if FrameType is arp(4). | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.606 |
| me1200AclAceArpOpcode Indicates how a ARP packet's opcode is to be compared. This object can
only be configured if FrameType is arp(4). | column | ME1200ArpOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.607 |
| me1200AclAceArpFlagRequest Indicates how a ARP packet's request/reply opcode is to be compared.
The value 0 means any ARP opcode is allowed (don't-care field), value 1
means ARP opcode is equal to request o… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.608 |
| me1200AclAceArpFlagSenderMac Indicates how a ARP packet's sender hardware address field (SHA) is to
be compared. The value 0 means any SHA value is allowed (don't-care
field), value 1 means SHA is not equal t… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.609 |
| me1200AclAceArpFlagTargetMac Indicates how a ARP packet's target hardware address field (THA) is to
be compared. The value 0 means any THA value is allowed (don't-care
field), value 1 means THA is not equal t… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.610 |
| me1200AclAceArpFlagLen Indicates how a ARP packet's s hardware address length field (HLN) is
to be compared. The value 0 means any HLN value is allowed (don't-care
field), value 1 means HLN is not equal… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.611 |
| me1200AclAceArpFlagIp Indicates how a ARP packet's hardware address space field (HRD) is to
be compared. The value 0 means any HRD value is allowed (don't-care
field), value 1 means HRD is not equal to… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.612 |
| me1200AclAceArpFlagEthernet Indicates how a ARP packet's protocol address space field (PRO) is to
be compared. The value 0 means any PRO value is allowed (don't-care
field), value 1 means PRO is not equal to… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.613 |
| me1200AclAcePolicyMask The policy number for this ACE. The feature is inactive when policy
mask value is non-zero. | column | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.7 |
| me1200AclAceIpv4DestMacOp Indicates how a IPv4 packet's destination MAC address is to be
compared. This object can only be configured if FrameType is ipv4(5). | column | ME1200DestMacType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.700 |
| me1200AclAceIpv4ProtocolOp Indicates how a IPv4 packet's protocol field is to be compared. This
object can only be configured if FrameType is ipv4(5). | column | ME1200ASType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.701 |
| me1200AclAceIpv4Protocol The protocol number field in the IPv4 header used to indicate a higher
layer protocol. Possible values are 0-255.This object can only be
configured if FrameType is ipv4(5) and Ipv… | column | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.702 |
| me1200AclAceIpv4FlagTtl Indicates how a IPv4 packet's Time-to-Live field (TTL) is to be
compared. The value 0 means any TTL value is allowed (don't-care
field), value 1 means TTL is not equal zero and va… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.703 |
| me1200AclAceIpv4FlagFragment Indicates how a IPv4 packet's More-Fragments field (MF) is to be
compared. The value 0 means any MF value is allowed (don't-care field),
value 1 means MF is not equal one (MF fiel… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.704 |
| me1200AclAceIpv4FlagIpOption Indicates how a IPv4 packet's options field is to be compared. The
value 0 means any options is allowed (don't-care field), value 1 means
options is not equal one (options field i… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.705 |
| me1200AclAceIpv4SrcIpMask The specified source IPv4 address mask. This object can only be
configured if FrameType isipv4(5). | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.707 |
| me1200AclAceIpv4DestIp The specified destination IPv4 address. The packets sender address is
AND-ed with the value of Ipv4DestIpMask and then compared with the
value of this object. If Ipv4DestIp and Ip… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.708 |
| me1200AclAceIpv4DestIpMask The specified destination IPv4 address mask. This object can only be
configured if FrameType isipv4(5). | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.709 |
| me1200AclAceIpv4IcmpTypeOp Indicates how a IPv4 packet's ICMP type field is to be compared. This
object can only be configured if FrameType is ipv4(5) and Ipv4Protocol
is icmp(1). | column | ME1200ASType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.710 |
| me1200AclAceIpv4IcmpType The ICMP type field in the IPv4 header. Possible values are 0-255.This
object can only be configured if FrameType is ipv4(5), Ipv4Protocol is
icmp(1) and Ipv4IcmpTypeOp is specifi… | column | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.711 |
| me1200AclAceIpv4IcmpCodeOp Indicates how a IPv4 packet's ICMP code field is to be compared. This
object can only be configured if FrameType is ipv4(5) and Ipv4Protocol
is icmp(1). | column | ME1200ASType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.712 |
| me1200AclAceIpv4IcmpCode The ICMP code field in the IPv4 header. Possible values are 0-255.This
object can only be configured if FrameType is ipv4(5), Ipv4Protocol is
icmp(1) and Ipv4IcmpCodeOp is specifi… | column | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.713 |
| me1200AclAceIpv4SrcPortOp Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv4(5). | column | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.714 |
| me1200AclAceIpv4SrcPort The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid r… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.715 |
| me1200AclAceIpv4SrcPortRange The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid ran… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.716 |
| me1200AclAceIpv4DestPortOp Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv4(5). | column | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.717 |
| me1200AclAceIpv4DestPort The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. V… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.718 |
| me1200AclAceIpv4DestPortRange The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Val… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.719 |
| me1200AclAceIpv4TcpFlagFin Indicates how a IPv4 TCP packet's 'No more data from sender' field
(FIN) is to be compared. The value 0 means any FIN value is allowed
(don't-care field), value 1 means FIN is not… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.720 |
| me1200AclAceIpv4TcpFlagSyn Indicates how a IPv4 TCP packet's 'Synchronize sequence numbers' field
(SYN) is to be compared. The value 0 means any SYN value is allowed
(don't-care field), value 1 means SYN is… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.721 |
| me1200AclAceIpv4TcpFlagRst Indicates how a IPv4 TCP packet's 'Reset the connection' field (RST) is
to be compared. The value 0 means any RST value is allowed (don't-care
field), value 1 means RST is not equ… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.722 |
| me1200AclAceIpv4TcpFlagPsh Indicates how a IPv4 TCP packet's 'Push Function' field (PSH) is to be
compared. The value 0 means any PSH value is allowed (don't-care
field), value 1 means PSH is not equal one … | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.723 |
| me1200AclAceIpv4TcpFlagAck Indicates how a IPv4 TCP packet's 'Acknowledgment field significant'
field (ACK) is to be compared. The value 0 means any FIN value is
allowed (don't-care field), value 1 means AC… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.724 |
| me1200AclAceIpv4TcpFlagUrg Indicates how a IPv4 TCP packet's 'Urgent Pointer field significant'
field (URG) is to be compared. The value 0 means any URG value is
allowed (don't-care field), value 1 means UR… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.725 |
| me1200AclAceHitAction The hit action operation for this ACE. Note all ports will be the
filter port member when filter action is set on the first time. | column | ME1200AclAceHitAction | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.8 |
| me1200AclAceIPv6DestMacOp Indicates how a IPv6 packet's destination MAC address is to be
compared. This object can only be configured if FrameType is arp(4). | column | ME1200DestMacType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.800 |
| me1200AclAceIpv6NextHeaderOp Indicates how a IPv6 packet's next header field is to be compared. This
object can only be configured if FrameType is ipv6(6). | column | ME1200ASType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.801 |
| me1200AclAceIpv6NextHeader The next header field in the IPv6 header used to indicate a higher
layer protocol. Possible values are 0-255.This object can only be
configured if FrameType is ipv6(6) and Ipv6Nex… | column | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.802 |
| me1200AclAceIpv6SrcIp The specified IPv6 source address. The packets source address is AND-ed
with the value of Ipv6SrcIpMask and then compared with the value of
this object. If Ipv6SrcIp and Ipv6SrcIp… | column | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.803 |
| me1200AclAceIpv6SrcIpMask The specified IPv6 source address mask. Only the least significant 32
bits of this object are used. This object can only be configured if
FrameType is ipv6(6). | column | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.804 |
| me1200AclAceIpv6FlagHopLimiter Indicates how a IPv6 packet's hop limit field is to be compared. The
value 0 means any hop limit value is allowed (don't-care field), value
1 means hop limit is not equal zero and… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.805 |
| me1200AclAceIpv6Icmpv6TypeOp Indicates how a IPv6 packet's ICMPv6 type field is to be compared. This
object can only be configured if FrameType is ipv6(6) and
Ipv6NextHeader is icmpv6(58). | column | ME1200ASType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.806 |
| me1200AclAceIpv6Icmpv6Type The ICMPv6 type field in the IPv6 header. Possible values are
0-255.This object can only be configured if FrameType is ipv6(6),
Ipv6NextHeader is icmpv6(58) and Ipv6Icmpv6TypeOp i… | column | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.807 |
| me1200AclAceIpv6Icmpv6CodeOp Indicates how a IPv6 packet's ICMPv6 code field is to be compared. This
object can only be configured if FrameType is ipv6(6) and
Ipv6NextHeader is icmpv6(58). | column | ME1200ASType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.808 |
| me1200AclAceIpv6Icmpv6Code The ICMPv6 code field in the IPv6 header. Possible values are
0-255.This object can only be configured if FrameType is ipv6(6),
Ipv6NextHeader is icmpv6(58) and Ipv6Icmpv6CodeOp i… | column | ME1200-TCME1200Unsigned8 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.809 |
| me1200AclAceIpv6SrcPortOp Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv6(6). | column | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.810 |
| me1200AclAceIpv6SrcPort The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid r… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.811 |
| me1200AclAceIpv6SrcPortRange The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid ran… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.812 |
| me1200AclAceIpv6DestPortOp Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv6(6). | column | ME1200ASRType | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.813 |
| me1200AclAceIpv6DestPort The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. V… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.814 |
| me1200AclAceIpv6DestPortRange The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Val… | column | ME1200-TCME1200Unsigned16 | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.815 |
| me1200AclAceIpv6TcpFlagFin Indicates how a IPv6 TCP packet's 'No more data from sender' field
(FIN) is to be compared. The value 0 means any FIN value is allowed
(don't-care field), value 1 means FIN is not… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.816 |
| me1200AclAceIpv6TcpFlagSyn Indicates how a IPv6 TCP packet's 'Synchronize sequence numbers' field
(SYN) is to be compared. The value 0 means any SYN value is allowed
(don't-care field), value 1 means SYN is… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.817 |
| me1200AclAceIpv6TcpFlagRst Indicates how a IPv6 TCP packet's 'Reset the connection' field (RST) is
to be compared. The value 0 means any RST value is allowed (don't-care
field), value 1 means RST is not equ… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.818 |
| me1200AclAceIpv6TcpFlagPsh Indicates how a IPv6 TCP packet's 'Push Function' field (PSH) is to be
compared. The value 0 means any PSH value is allowed (don't-care
field), value 1 means PSH is not equal one … | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.819 |
| me1200AclAceIpv6TcpFlagAck Indicates how a IPv6 TCP packet's 'Acknowledgment field significant'
field (ACK) is to be compared. The value 0 means any FIN value is
allowed (don't-care field), value 1 means AC… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.820 |
| me1200AclAceIpv6TcpFlagUrg Indicates how a IPv6 TCP packet's 'Urgent Pointer field significant'
field (URG) is to be compared. The value 0 means any URG value is
allowed (don't-care field), value 1 means UR… | column | ME1200AclAceFlagOpcode | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.821 |
| me1200AclAceFilterPortList The filter port list. It is active only when the hit action is
filtered. Set the action value to 0(filter) before the new setting.
Note that the action will change deny action if … | column | ME1200-TCME1200PortList | .1.3.6.1.4.1.9.9.815.1.17.1.2.1.2.1.1.9 |