LUM-MCLAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
15
.1.3.6.1.4.1.8708.2.62.2.2.1 · 1 row entry · 15 columns
The MC-LAG RG list.
mclagEntry entry .1.3.6.1.4.1.8708.2.62.2.2.1.1
An entry in the MC-LAG RG list.
Indexes
mclagIndex
Column Syntax OID
mclagIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.62.2.2.1.1.1
mclagName
The management name of the MC-LAG, for example
'mcLag:1:2:TM-LAG' (mcLag:[subrack]:[slot]:[LAG identifier])
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.8708.2.62.2.2.1.1.2
mclagDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.8708.2.62.2.2.1.1.3
mclagNodeId
Used to ensure that the LACP Port Numbers are unique across all PE:s in a Redundancy Group.
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.8708.2.62.2.2.1.1.4
mclagRgId
The Redundancy Group ID of the ICCP channel being used.
Unsigned32r/w
Constraints:
range: 1-8
.1.3.6.1.4.1.8708.2.62.2.2.1.1.5
mclagSynchronizationStatus
synchronized - The MC-LAG has received the configuration TLVs from its peer.
unSynchronized - The MC-LAG has not yet received the configuration TLVs from its peer or the information in
the received TLVs prevents the MC-…
Enumerationr/w
Enumerated Values:
1unSynchronized
2synchronized
3undefined
.1.3.6.1.4.1.8708.2.62.2.2.1.1.6
mclagControlledLag
The identifier of the controlled LAG.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.8708.2.62.2.2.1.1.7
mclagLagAdminSystemPrio
The Administrative System Priority is used in the initial negotiation with the other PE in the Redundancy Group.
It is necessary for all PE:s in a Redundancy Group to agree upon the System MAC Address and System Priorit…
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.8708.2.62.2.2.1.1.8
mclagLagOperSystemPrio
The Operational System Priority is the result of the initial negotiation. Every PE use the values for System MAC Address and System Priority that are supplied
by the PE with the numerically lowest value (among RG member…
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.8708.2.62.2.2.1.1.9
mclagLagAdminPortPrio
The Administrative Port Priority is used on all LACP ports in the controlled LAG.

Note! A change of the Administrative Port Priority may cause a traffic disturbance.

This attribute can be w…
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.8708.2.62.2.2.1.1.10
mclagLagOperPortPrio
The Operational Port Priority is used on all LACP ports in the controlled LAG.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.8708.2.62.2.2.1.1.11
mclagLagStatus
active - The LACP selection logic of the controlled LAG has determined that a local port has a higher Port Aggregation Priority.
standby - The LACP selection logic of the controlled LAG has determined that a remote port…
Enumerationr/w
Enumerated Values:
1standby
2active
.1.3.6.1.4.1.8708.2.62.2.2.1.1.12
mclagProtectionStateFailure
alarm - The ICCP RG does not have the Communication Failure alarm set and both the local and remote LAG has the LAG failure alarm active.

ok - One of the members in the RG is active or the ICCP RG has the…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
.1.3.6.1.4.1.8708.2.62.2.2.1.1.13
mclagProtectionStateDegraded
alarm - The ICCP RG has the Communication Failure alarm active, or either the local or remote LAG has the LAG failure alarm active.

ok - The ICCP RG does not have the Communication Failure alarm set and n…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
.1.3.6.1.4.1.8708.2.62.2.2.1.1.14
mclagInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.62.2.2.1.1.15