mclagName
LUM-MCLAG-MIB ·
.1.3.6.1.4.1.8708.2.62.2.2.1.1.2
Object
column
LUM-TCMgmtNameString
The management name of the MC-LAG, for example 'mcLag:1:2:TM-LAG' (mcLag:[subrack]:[slot]:[LAG identifier])
Context
- MIB
- LUM-MCLAG-MIB
- OID
.1.3.6.1.4.1.8708.2.62.2.2.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mclagEntry
- Table
- mclagTable
- Siblings
- 14
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mclagIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.62.2.2.1.1.1 |
| mclagLagAdminPortPrio The Administrative Port Priority is used on all LACP ports in the controlled LAG.
Note! A change of the Administrative Port Priority may cause a traffic disturbance… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.62.2.2.1.1.10 |
| mclagLagOperPortPrio The Operational Port Priority is used on all LACP ports in the controlled LAG.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.62.2.2.1.1.11 |
| mclagLagStatus active - The LACP selection logic of the controlled LAG has determined that a local port has a higher Port Aggregation Priority.
standby - The LACP selection logic of the controll… | column | Enumeration | .1.3.6.1.4.1.8708.2.62.2.2.1.1.12 |
| mclagProtectionStateFailure alarm - The ICCP RG does not have the Communication Failure alarm set and both the local and remote LAG has the LAG failure alarm active.
ok - One of the members in… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.62.2.2.1.1.13 |
| mclagProtectionStateDegraded alarm - The ICCP RG has the Communication Failure alarm active, or either the local or remote LAG has the LAG failure alarm active.
ok - The ICCP RG does not have t… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.62.2.2.1.1.14 |
| mclagInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.62.2.2.1.1.15 |
| mclagDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.62.2.2.1.1.3 |
| mclagNodeId Used to ensure that the LACP Port Numbers are unique across all PE:s in a Redundancy Group. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.62.2.2.1.1.4 |
| mclagRgId The Redundancy Group ID of the ICCP channel being used. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.62.2.2.1.1.5 |
| mclagSynchronizationStatus synchronized - The MC-LAG has received the configuration TLVs from its peer.
unSynchronized - The MC-LAG has not yet received the configuration TLVs from its peer or the informati… | column | Enumeration | .1.3.6.1.4.1.8708.2.62.2.2.1.1.6 |
| mclagControlledLag The identifier of the controlled LAG. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.62.2.2.1.1.7 |
| mclagLagAdminSystemPrio The Administrative System Priority is used in the initial negotiation with the other PE in the Redundancy Group.
It is necessary for all PE:s in a Redundancy Group to agree upon t… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.62.2.2.1.1.8 |
| mclagLagOperSystemPrio The Operational System Priority is the result of the initial negotiation. Every PE use the values for System MAC Address and System Priority that are supplied
by the PE with the n… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.62.2.2.1.1.9 |