LUM-IFSDH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
22

ifSdhRsTable

table
.1.3.6.1.4.1.8708.2.52.2.2.1 · 1 row entry · 13 columns
Open in standard view 
The regenerator (rs) group contains information and
configuration for the regenerator section (rs).
ifSdhRsEntry entry .1.3.6.1.4.1.8708.2.52.2.2.1.1
An entry in the ifSdh rs list.
Indexes
ifSdhRsIndex
Column Syntax OID
ifSdhRsIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.1
ifSdhRsName
The management name of the optical transmission section,
for example 'rs:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.2
ifSdhRsConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.3
ifSdhRsOhTransparencyBitmask
The OH transparency bitmask.
Bits:
B1 = 0x01
E1 = 0x02
F1 = 0x04
D1-D3 = 0x08
J0 = 0x10
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.4
ifSdhRsTraceTransmitted
The trace to be transmitted from this interface.

Default value: <IP address>:<subrack>:<slot>:<port>
Note that only the last part of the address is used.

The trace _notApplicable_ is u…
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.5
ifSdhRsTraceReceived
The received trace for this interface.

The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.

The trace _notAvailable_ is used to tell S…
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.6
ifSdhRsTraceExpected
Trace used for matching against the received trace.

The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.7
ifSdhRsTraceAlarmMode
Controls if the trace identifier mismatch alarm
should be raised if received trace and expected trace
differs.

disabled - The alarm is disabled.

enabled - The alarm is raised if expected tr…
LUM-TCEnabledDisabledWithNA
Textual Convention: LUM-TCEnabledDisabledWithNA Enumeration
Type Values:
1disabled
2enabled
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.8
ifSdhRsTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.9
ifSdhRsRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.10
ifSdhRsTraceMismatch
Trace identifier mismatch (TIM).

Indicates if the expected trace identifier differs from the
received trace identifier.

Reference: J0: G.707/9.2.2.2, TIM: G.806/2.2.2

alarm: …
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.11
ifSdhRsLossOfFrame
Rx RS-Loss of frame (LOF).

Reference: G.707/9.2.2.1, G.783/2.5.1, G.783/9.3.1.2

alarm: An RSOH frame cannot be located.

ok: An RSOH frame can be located.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.12
ifSdhRsTxLossOfFrame
Tx RS-Loss of frame (LOF).

Reference: G.707/9.2.2.1, G.783/2.5.1, G.783/9.3.1.2

alarm: An RSOH frame cannot be located.

ok: An RSOH frame can be located.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.13

ifSdhMsTable

table
.1.3.6.1.4.1.8708.2.52.2.3.1 · 1 row entry · 9 columns
Open in standard view 
The multiplexing (ms) group contains information and
configuration for the multiplexing section (ms).
ifSdhMsEntry entry .1.3.6.1.4.1.8708.2.52.2.3.1.1
An entry in the ifSdh ms list.
Indexes
ifSdhMsIndex
Column Syntax OID
ifSdhMsIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.1
ifSdhMsName
The management name of the optical transmission section,
for example 'ms:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.2
ifSdhMsConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.3
ifSdhMsOhTransparencyBitmask
The OH transparency bitmask.
Bits:
B2 = 0x01
E2 = 0x02
D4-D12 = 0x04
K1-K2 = 0x08
LUM-TCUnsigned32WithNA
Textual Convention: LUM-TCUnsigned32WithNA Unsigned32
Type Constraints:
range: 0..4294967294
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.4
ifSdhMsTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.5
ifSdhMsRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Textual Convention: LUM-TCSignalStatusWithNA Enumeration
Type Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.6
ifSdhMsRxAlarmIndicationSignal
Rx MS-Alarm indication signal (AIS).

Reference: G.806/6.2.6.2, G.806/6.3.1, G.806/Appendix III

alarm: An MS AIS signal is detected.

ok: The MS AIS is cleared.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.7
ifSdhMsRemoteDefectIndication
Rx MS-Remote defect indication (RDI).

Reference: G1: G.707/9.3.1.4, G.806/6.2.6.3, G.806/6.3.2

alarm: RDI indication (in frame) active.

ok: RDI indication inactive.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.8
ifSdhMsTxAlarmIndicationSignal
Tx MS-Alarm indication signal (AIS).

Reference: G.806/6.2.6.2, G.806/6.3.1, G.806/Appendix III

alarm: An MS AIS signal is detected.

ok: The MS AIS is cleared.
LUM-TCFaultStatusWithNA
Textual Convention: LUM-TCFaultStatusWithNA Enumeration
Type Values:
1ok
2alarm
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.9