ifSdhRsOhTransparencyBitmask
LUM-IFSDH-MIB ·
.1.3.6.1.4.1.8708.2.52.2.2.1.1.4
Object
column
LUM-TCUnsigned32WithNA
The OH transparency bitmask. Bits: B1 = 0x01 E1 = 0x02 F1 = 0x04 D1-D3 = 0x08 J0 = 0x10
Context
- MIB
- LUM-IFSDH-MIB
- OID
.1.3.6.1.4.1.8708.2.52.2.2.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifSdhRsEntry
- Table
- ifSdhRsTable
- Siblings
- 12
Values & Constraints
Type Constraints
range: 0..4294967294
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifSdhRsIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.52.2.2.1.1.1 |
| ifSdhRsRxSignalStatus The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.52.2.2.1.1.10 |
| ifSdhRsTraceMismatch Trace identifier mismatch (TIM).
Indicates if the expected trace identifier differs from the
received trace identifier.
Reference: J0: G.707/9.2.2.2,… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.52.2.2.1.1.11 |
| ifSdhRsLossOfFrame Rx RS-Loss of frame (LOF).
Reference: G.707/9.2.2.1, G.783/2.5.1, G.783/9.3.1.2
alarm: An RSOH frame cannot be located.
ok: An RSOH fr… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.52.2.2.1.1.12 |
| ifSdhRsTxLossOfFrame Tx RS-Loss of frame (LOF).
Reference: G.707/9.2.2.1, G.783/2.5.1, G.783/9.3.1.2
alarm: An RSOH frame cannot be located.
ok: An RSOH fr… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.52.2.2.1.1.13 |
| ifSdhRsName The management name of the optical transmission section,
for example 'rs:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the ph… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.52.2.2.1.1.2 |
| ifSdhRsConnIfBasicIfIndex An index that describes to which index in ifBasicIf table
this object is related. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.52.2.2.1.1.3 |
| ifSdhRsTraceTransmitted The trace to be transmitted from this interface.
Default value: <IP address>:<subrack>:<slot>:<port>
Note that only the last part of the address is used.
… | column | OctetString | .1.3.6.1.4.1.8708.2.52.2.2.1.1.5 |
| ifSdhRsTraceReceived The received trace for this interface.
The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.
Th… | column | OctetString | .1.3.6.1.4.1.8708.2.52.2.2.1.1.6 |
| ifSdhRsTraceExpected Trace used for matching against the received trace.
The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration. | column | OctetString | .1.3.6.1.4.1.8708.2.52.2.2.1.1.7 |
| ifSdhRsTraceAlarmMode Controls if the trace identifier mismatch alarm
should be raised if received trace and expected trace
differs.
disabled - The alarm is disabled.
enab… | column | LUM-TCEnabledDisabledWithNA | .1.3.6.1.4.1.8708.2.52.2.2.1.1.8 |
| ifSdhRsTxSignalStatus The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.52.2.2.1.1.9 |