L2L3-VPN-MCAST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
6
.1.3.6.1.4.1.2636.5.11.1.1.1.1 · 1 row entry · 6 columns
This table is for advertised/received PMSI attributes,
to be referred to by I-PMSI or S-PMSI table entries
jnxL2L3VpnMcastPmsiTunnelAttributeEntry entry .1.3.6.1.4.1.2636.5.11.1.1.1.1.1
An entry in this table corresponds to an PMSI attribute
that is advertised/received on this router.
For BGP-based signaling (for I-PMSI via auto-discovery
procedure, or for S-PMSI via S-PMSI A-D routes),
they are just a…
Indexes
jnxL2L3VpnMcastPmsiTunnelAttributeFlags jnxL2L3VpnMcastPmsiTunnelAttributeType jnxL2L3VpnMcastPmsiTunnelAttributeLabel jnxL2L3VpnMcastPmsiTunnelAttributeId
Column Syntax OID
jnxL2L3VpnMcastPmsiTunnelAttributeFlags
For UDP-based S-PMSI signaling for PIM-MVPN, this is 0.
For BGP-based I/S-PMSI signaling,
per RFC 6514 section 5, 'PMSI Tunnel Attribute':

The Flags field has the following format:

OctetString
Constraints:
range: 1-1
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.1
jnxL2L3VpnMcastPmsiTunnelAttributeType
For BGP-based I/S-PMSI signaling for either PIM or BGP-MVPN,
per RFC 6514 section 5, 'PMSI Tunnel Attribute':

The Tunnel Type identifies the type of the tunneling technology used
to establish the PMSI tun…
JnxL2L3VpnMcastProviderTunnelType
Textual Convention: JnxL2L3VpnMcastProviderTunnelType Enumeration
Type Values:
0unconfigured
1rsvp-p2mp
2ldp-p2mp
3pim-ssm
4pim-asm
5pim-bidir
6ingress-replication
7ldp-mp2mp
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.2
jnxL2L3VpnMcastPmsiTunnelAttributeLabel
For BGP-based I/S-PMSI signaling,
per RFC 6514 section 5, 'PMSI Tunnel Attribute':

If the MPLS Label field is non-zero, then it contains an MPLS label
encoded as 3 octets, where the high-order 20 bits con…
MPLS-TC-STD-MIBMplsLabel
Textual Convention: MPLS-TC-STD-MIBMplsLabel Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.3
jnxL2L3VpnMcastPmsiTunnelAttributeId
For BGP-based signaling, as defined in RFC 6514 section 5,
'PMSI Tunnel Attribute'.

For UDP-based S-PMSI signaling for PIM-MVPN, RFC 6513 only
specifies the 'P-Group' address, and that is filled into
the …
OctetString
Constraints:
range: 0-37
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.4
jnxL2L3VpnMcastPmsiTunnelPointer
If the tunnel exists in some MIB table, this is the row pointer
to it.
SNMPv2-TCRowPointer
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.5
jnxL2L3VpnMcastPmsiTunnelIf
If the tunnel has a corresponding interface, this is the
row pointer to the ifName table.
SNMPv2-TCRowPointer
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.6