jnxL2L3VpnMcastPmsiTunnelAttributeEntry
L2L3-VPN-MCAST-MIB ·
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1
Object
row
An entry in this table corresponds to an PMSI attribute
that is advertised/received on this router.
For BGP-based signaling (for I-PMSI via auto-discovery
procedure, or for S-PMSI via S-PMSI A-D routes),
they are just as signaled by BGP (RFC 6514 section 5,
'PMSI Tunnel attribute').
For UDP-based S-PMSI signaling for PIM-MVPN,
they're derived from S-PMSI Join Message
(RFC 6513 section 7.4.2, 'UDP-based Protocol')..
Note that BGP-based signaling may be used for
PIM-MVPN as well.
Context
- MIB
- L2L3-VPN-MCAST-MIB
- OID
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1- Type
- row
- Status
- current
- Parent
- jnxL2L3VpnMcastPmsiTunnelAttributeTable
- Table
- jnxL2L3VpnMcastPmsiTunnelAttributeTable
- Children
- 6
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxL2L3VpnMcastPmsiTunnelAttributeFlags For UDP-based S-PMSI signaling for PIM-MVPN, this is 0.
For BGP-based I/S-PMSI signaling,
per RFC 6514 section 5, 'PMSI Tunnel Attribute':
The Flags field has the f… | column | OctetString | .1.3.6.1.4.1.2636.5.11.1.1.1.1.1.1 |
| jnxL2L3VpnMcastPmsiTunnelAttributeType For BGP-based I/S-PMSI signaling for either PIM or BGP-MVPN,
per RFC 6514 section 5, 'PMSI Tunnel Attribute':
The Tunnel Type identifies the type of the tunneling t… | column | JnxL2L3VpnMcastProviderTunnelType | .1.3.6.1.4.1.2636.5.11.1.1.1.1.1.2 |
| jnxL2L3VpnMcastPmsiTunnelAttributeLabel For BGP-based I/S-PMSI signaling,
per RFC 6514 section 5, 'PMSI Tunnel Attribute':
If the MPLS Label field is non-zero, then it contains an MPLS label
encoded as 3 … | column | MPLS-TC-STD-MIBMplsLabel | .1.3.6.1.4.1.2636.5.11.1.1.1.1.1.3 |
| jnxL2L3VpnMcastPmsiTunnelAttributeId For BGP-based signaling, as defined in RFC 6514 section 5,
'PMSI Tunnel Attribute'.
For UDP-based S-PMSI signaling for PIM-MVPN, RFC 6513 only
specifies the 'P-Grou… | column | OctetString | .1.3.6.1.4.1.2636.5.11.1.1.1.1.1.4 |
| jnxL2L3VpnMcastPmsiTunnelPointer If the tunnel exists in some MIB table, this is the row pointer
to it. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.2636.5.11.1.1.1.1.1.5 |
| jnxL2L3VpnMcastPmsiTunnelIf If the tunnel has a corresponding interface, this is the
row pointer to the ifName table. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.2636.5.11.1.1.1.1.1.6 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxL2L3VpnMcastPmsiTunnelAttributeFlags For UDP-based S-PMSI signaling for PIM-MVPN, this is 0.
For BGP-based I/S-PMSI signaling,
per RFC 6514 section 5, 'PMSI Tunnel Attribute':
The Flags field has the f… | column | OctetString | .1.3.6.1.4.1.2636.5.11.1.1.1.1.1.1 |
| jnxL2L3VpnMcastPmsiTunnelAttributeType For BGP-based I/S-PMSI signaling for either PIM or BGP-MVPN,
per RFC 6514 section 5, 'PMSI Tunnel Attribute':
The Tunnel Type identifies the type of the tunneling t… | column | JnxL2L3VpnMcastProviderTunnelType | .1.3.6.1.4.1.2636.5.11.1.1.1.1.1.2 |
| jnxL2L3VpnMcastPmsiTunnelAttributeLabel For BGP-based I/S-PMSI signaling,
per RFC 6514 section 5, 'PMSI Tunnel Attribute':
If the MPLS Label field is non-zero, then it contains an MPLS label
encoded as 3 … | column | MPLS-TC-STD-MIBMplsLabel | .1.3.6.1.4.1.2636.5.11.1.1.1.1.1.3 |
| jnxL2L3VpnMcastPmsiTunnelAttributeId For BGP-based signaling, as defined in RFC 6514 section 5,
'PMSI Tunnel Attribute'.
For UDP-based S-PMSI signaling for PIM-MVPN, RFC 6513 only
specifies the 'P-Grou… | column | OctetString | .1.3.6.1.4.1.2636.5.11.1.1.1.1.1.4 |