juniSystemUtilizationCurrentValue
Juniper-System-MIB ·
.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.6
Object
column
SNMPv2-SMIGauge32
The current number of units of the resource in the system.
See the DESCRIPTION for juniSystemUtilizationResourceSubType for what
constitutes a unit of value for this object.
Note that some resource types may have instances that do not consume any
limited resources and therefore are not included in this count (e.g. IP
loopback interfaces do not consume routing resources and therefore don't
have a capacity limit, whereas 'external' IP interfaces do).
Context
- MIB
- Juniper-System-MIB
- OID
.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- juniSystemUtilizationEntry
- Table
- juniSystemUtilizationTable
- Siblings
- 8
Syntax
SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniSystemUtilizationResourceType This index identifies a type of enumerated value that is used for the
juniSystemUtilizationResourceSubType. See the DESCRIPTION for
juniSystemUtilizationResourceSubType for the m… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.2.1.10.1.1.1 |
| juniSystemUtilizationResourceSubType This index uses an enumerated value that is different for each value of
juniSystemUtilizationResourceType. The following table shows the
mapping of Type to SubType enumeration an… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.2.1.10.1.1.2 |
| juniSystemUtilizationLocationType This index element identifies the format of the location information so
that the juniSystemUtilizationLocation index element can be properly
interpreted. | column | JuniSystemLocationType | .1.3.6.1.4.1.4874.2.2.2.1.10.1.1.3 |
| juniSystemUtilizationLocation This index is used to specify the resource instance based on its
location. Its value is interpreted based on the location type
identified by the juniSystemUtilizationLocationType… | column | JuniSystemLocation | .1.3.6.1.4.1.4874.2.2.2.1.10.1.1.4 |
| juniSystemUtilizationMaxCapacity The maximum number of units of the resource the system can support.
See the DESCRIPTION of juniSystemUtilizationResourceSubType for what
constitutes a unit of value… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4874.2.2.2.1.10.1.1.5 |
| juniSystemUtilizationThresholdRising The threshold value (risingVal), which, in conjunction with
juniSystemUtilizationHoldDownTime (holdTime) and
juniSystemUtilizationThresholdFalling (fallingVal), is used to decide
… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4874.2.2.2.1.10.1.1.7 |
| juniSystemUtilizationThresholdFalling The threshold value (fallingVal), which, in conjunction with
juniSystemUtilizationHoldDownTime (holdTime) and
juniSystemUtilizationThresholdRising (risingVal), is used to decide w… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4874.2.2.2.1.10.1.1.8 |
| juniSystemUtilizationHoldDownTime The hold-down time (holdTime) used in conjunction with
juniSystemUtilizationThresholdRising (risingVal) and
juniSystemUtilizationThresholdFalling (fallingVal) to decide when to
tr… | column | seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4874.2.2.2.1.10.1.1.9 |