Jetnet5010G Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
60
Rows
60
Columns
314

ipConfigurationTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.2.3.1 · 1 row entry · 8 columns
Open in standard view 
Table of descriptive information and configuration about
the IP of the device.
ipConfigurationEntry entry .1.3.6.1.4.1.24062.2.2.1.2.3.1.1
Information configuring static IP or DHCP configuration
of the device.
Indexes
ipConfigurationIndex
Column Syntax OID
ipConfigurationIndex mandatory
This object identifies IP configuration entries.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.3.1.1.1
ipConfigurationDHCPStatus mandatory
Parameter configuring DHCP client functionality of the
device. When enabled, device will be a DHCP client and
request for the IP configuration from DHCP server.

The Dynamic Host Configuration Protocol (…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.24062.2.2.1.2.3.1.1.2
ipConfigurationAddress mandatory
The IP address of switch.
An IP address (Internet Protocol address) is a unique address
that devices use in order to identify and communicate with
each other on a computer network utilizing the Internet
Protocol stan…
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.3.1.1.3
ipConfigurationSubMask mandatory
The subnet mask is a 32-bit number in the same format and
representation as IP addresses. The subnet mask determines
which bits in the IP address are interpreted as the network
number, which as the subnetwork number,…
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.3.1.1.4
ipConfigurationGateway mandatory
The default gateway IP address identifies the gateway (for
example, a router) that receives and forwards those packets
whose addresses are unknown to the local network. The agent
uses the default gateway address when…
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.3.1.1.5
ipConfigurationDNS1 mandatory
Parameter configuring the first DNS server of the device.

The domain name system (DNS) stores and associates many
types of information with domain names. Most importantly,
it translates domain names (c…
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.3.1.1.6
ipConfigurationDNS2 mandatory
Parameter configuring the second DNS server of the device.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.3.1.1.7
ipConfigurationStatus mandatory
The status of the IP configuration entry. Only one
configuration entry is supported on the device. Set active(1)
to activate the parameters of the entry on the device.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.2.3.1.1.8

ntpTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.2.4.4.3.1 · 1 row entry · 2 columns
Open in standard view 
Table of descriptive information and configuration about NTP 
servers. 
          
NTP (Network Time Protocol) synchronizes timekeeping among a 
set of distributed time servers and clients. This synchronization 
allows events to be correlated when system logs are created and 
other time-specific events occur.
          
An NTP server is configured to synchronize NTP clients. Servers 
can be configured to synchronize any client or only specific 
clients. NTP servers, however, will accept no synchronization 
information from their clients and therefore will not let 
clients update or affect the server's time settings.
          
This switch acts as an NTP client, which tries to let its clock 
be set and synchronized by an external NTP timeserver. It can be 
configured to use multiple servers (upto 4 servers).
ntpEntry entry .1.3.6.1.4.1.24062.2.2.1.2.4.4.3.1.1
Information configuring IP addresses of NTP servers.
Indexes
ntpIndex
Column Syntax OID
ntpIndex mandatory
This object identifies the entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.4.4.3.1.1.1
ntpServerIP mandatory
The IP address of an NTP Server. Set 0.0.0.0 or
255.255.255.255 to remove this config.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.4.4.3.1.1.2

dhcpServerPoolTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.2.5.2 · 1 row entry · 7 columns
Open in standard view 
Table of descriptive information and configuration about
DHCP server of the switch.
dhcpServerPoolEntry entry .1.3.6.1.4.1.24062.2.2.1.2.5.2.1
An entry containing DHCP server information
of the switch.
Indexes
dhcpServerPoolIndex
Column Syntax OID
dhcpServerPoolIndex mandatory
The index of the Address Pool.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.5.2.1.1
dhcpServerPoolName mandatory
The address pool name.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.24062.2.2.1.2.5.2.1.2
dhcpServerPoolNetwork mandatory
The Subnet of the IP Address Pool.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.5.2.1.3
dhcpServerPoolSubMask mandatory
The subnet mask of the IP Address Pool.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.5.2.1.4
dhcpServerPoolGateway mandatory
The gateway address of the IP Address Pool.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.5.2.1.5
dhcpServerPoolLeaseTime mandatory
The lease time(in second) of the Address Pool.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.5.2.1.6
dhcpServerPoolStatus mandatory
The status of the Address Pool.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.2.5.2.1.7

dhcpExcludedTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.2.5.3 · 1 row entry · 3 columns
Open in standard view 
Table of descriptive information and configuration about
DHCP server of the switch.
dhcpExcludedEntry entry .1.3.6.1.4.1.24062.2.2.1.2.5.3.1
An entry containing DHCP server information
of the switch.
Indexes
dhcpServerPoolIndex dhcpExcludedIndex
Column Syntax OID
dhcpExcludedIndex mandatory
The index of the Excluded Table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.5.3.1.1
dhcpExcludedIp mandatory
The IP address .
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.5.3.1.2
dhcpExcludedStatus mandatory
The status of a address pool.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.2.5.3.1.3

dhcpManualBindingTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.2.5.4 · 1 row entry · 4 columns
Open in standard view 
Table of descriptive information and configuration about
DHCP server of the switch.
dhcpManualBindingEntry entry .1.3.6.1.4.1.24062.2.2.1.2.5.4.1
An entry containing DHCP server information
of the switch.
Indexes
dhcpServerPoolIndex dhcpManualBindingIndex
Column Syntax OID
dhcpManualBindingIndex mandatory
The index of the Static Binding Table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.5.4.1.1
dhcpManualBindingIp mandatory
The IP address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.5.4.1.2
dhcpManualBindingMac mandatory
The MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.24062.2.2.1.2.5.4.1.3
dhcpManualBindingStatus mandatory
The status of the binding.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.2.5.4.1.4

dhcpStaticPortTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.2.5.5 · 1 row entry · 4 columns
Open in standard view 
Table of descriptive information and configuration about
DHCP server of the switch.
dhcpStaticPortEntry entry .1.3.6.1.4.1.24062.2.2.1.2.5.5.1
An entry containing DHCP server information
of the switch.
Indexes
dhcpServerPoolIndex dhcpStaticPortIndex
Column Syntax OID
dhcpStaticPortIndex mandatory
The index of the StaticPort Table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.5.5.1.1
dhcpStaticPortNumber mandatory
The port number .
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.5.5.1.2
dhcpStaticPortIp mandatory
The IP address .
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.5.5.1.3
dhcpStaticPortStatus mandatory
The status of a static port entry.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.2.5.5.1.4

dhcpOption82Table

table mandatory
.1.3.6.1.4.1.24062.2.2.1.2.5.6 · 1 row entry · 7 columns
Open in standard view 
DHCP server option82 table.
dhcpOption82Entry entry .1.3.6.1.4.1.24062.2.2.1.2.5.6.1
DHCP server option82 entry.
Indexes
dhcpServerPoolIndex dhcpOption82Index
Column Syntax OID
dhcpOption82Index mandatory
The index of the table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.5.6.1.1
dhcpOption82CircuitIdType mandatory
The Circuit-ID type of this option.
Enumerationr/w
Enumerated Values:
0any
2string
3hexadecimal
 .1.3.6.1.4.1.24062.2.2.1.2.5.6.1.2
dhcpOption82CircuitIdValue mandatory
The Circuit-ID value of this option.
OctetStringr/w .1.3.6.1.4.1.24062.2.2.1.2.5.6.1.3
dhcpOption82RemoteIdType mandatory
The Remote-ID type of this option.
Enumerationr/w
Enumerated Values:
0any
2string
3hexadecimal
 .1.3.6.1.4.1.24062.2.2.1.2.5.6.1.4
dhcpOption82RemoteIdValue mandatory
The Remote-ID value of this option.
OctetStringr/w .1.3.6.1.4.1.24062.2.2.1.2.5.6.1.5
dhcpOption82Ip mandatory
The IP Address bind to this option.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.5.6.1.6
dhcpOption82Status mandatory
he status of a static port entry.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.2.5.6.1.7

dhcpServerLeasedTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.2.5.7 · 1 row entry · 5 columns
Open in standard view 
Table of descriptive information and configuration about
DHCP server of the switch.
dhcpServerLeasedEntry entry .1.3.6.1.4.1.24062.2.2.1.2.5.7.1
An entry containing DHCP server information
of the switch.
Indexes
dhcpServerPoolIndex dhcpServerLeasedIndex
Column Syntax OID
dhcpServerLeasedIndex mandatory
The index of the Leased Table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.5.7.1.1
dhcpServerLeasedIp mandatory
The client IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.5.7.1.2
dhcpServerLeasedMac mandatory
The client MAC address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.24062.2.2.1.2.5.7.1.3
dhcpServerLeasedType mandatory
.
Enumeration
Enumerated Values:
1manual
2dynamic
 .1.3.6.1.4.1.24062.2.2.1.2.5.7.1.4
dhcpServerLeasedTime mandatory
The lease time of the client.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.5.7.1.5

dhcpRelayAgentCircuitIdTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.2.5.10 · 1 row entry · 3 columns
Open in standard view 
Description.
dhcpRelayAgentCircuitIdEntry entry .1.3.6.1.4.1.24062.2.2.1.2.5.10.1
Description.
Indexes
dhcpRelayAgentCircuitIdPortNum
Column Syntax OID
dhcpRelayAgentCircuitIdPortNum mandatory
Description.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.2.5.10.1.1
dhcpRelayAgentCircuitIdValue mandatory
Circuit-ID value of the Option82 added by Relay Agent, the format
can be String or Hexadecimal value.
OctetStringr/w .1.3.6.1.4.1.24062.2.2.1.2.5.10.1.3
dhcpRelayAgentCircuitIdDisplay mandatory
Display the Circuit-ID value by Hexadecimal format
OctetString .1.3.6.1.4.1.24062.2.2.1.2.5.10.1.4

dhcpHelperAddressTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.2.5.14 · 1 row entry · 1 columns
Open in standard view 
Table of descriptive information and configuration about
DHCP relay helper address of the switch.
dhcpHelperAddressEntry entry .1.3.6.1.4.1.24062.2.2.1.2.5.14.1
An entry containing DHCP relay information
of the switch.
Indexes
dhcpHelperAddress
Column Syntax OID
dhcpHelperAddress mandatory
The IP address .
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.2.5.14.1.1

portCtrlTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.3.1.1 · 1 row entry · 6 columns
Open in standard view 
Table of information and configuration for each ports.
portCtrlEntry entry .1.3.6.1.4.1.24062.2.2.1.3.1.1.1
An entry containing information and configuration for a port.
Indexes
portCtrlIndex
Column Syntax OID
portCtrlIndex mandatory
Index of the port control entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.3.1.1.1.1
portCtrlPortName mandatory
The name of port.
OctetString
Constraints:
range: 0-7
 .1.3.6.1.4.1.24062.2.2.1.3.1.1.1.2
portCtrlPortStatus mandatory
To enable or disable of this port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.24062.2.2.1.3.1.1.1.3
portCtrlSpeedAndDuplex mandatory
Speed and duplex configuraion.

Different speed and duplex modes are available. There are speeds:
1000 megabits per second (Gigabit Ethernet), 100 megabits per
second (Fast Ethernet), and 10 megabits per …
Enumerationr/w
Enumerated Values:
1autoNegotiation
2tenMbpsHalfDuplex
3tenMbpsFullDuplex
4hundredMbpsHalfDuplex
5hundredMbpsFullDuplex
6thousandMbpsFullDuplex
 .1.3.6.1.4.1.24062.2.2.1.3.1.1.1.4
portCtrlFlowControl mandatory
Flow control configuration.

Flow control is used to throttle the throughput rate of an
end station to avoid dropping packets during network
congestion. If flow control mode is not set and if there is
no…
Enumerationr/w
Enumerated Values:
1disable
2symmetric
 .1.3.6.1.4.1.24062.2.2.1.3.1.1.1.5
portCtrlPortDescription mandatory
The description of port.
OctetStringr/w
Constraints:
range: 0-138
 .1.3.6.1.4.1.24062.2.2.1.3.1.1.1.6

portStatusTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.3.2.1 · 1 row entry · 9 columns
Open in standard view 
Table of descriptive and statistics information about 
each ports.
portStatusEntry entry .1.3.6.1.4.1.24062.2.2.1.3.2.1.1
An entry containing statistics information of a port.
Indexes
portStatusIndex
Column Syntax OID
portStatusIndex mandatory
Index of port statistic table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.3.2.1.1.1
portStatusType mandatory
Indicates the type of the port.
Enumeration
Enumerated Values:
1hundredBaseTX
2thousandBaseT
3hundredBaseFX
4thousandBaseSX
5thousandBaseLX
6other
7notPresent
 .1.3.6.1.4.1.24062.2.2.1.3.2.1.1.2
portStatusLink mandatory
Indicate the link state of the port.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.24062.2.2.1.3.2.1.1.3
portStatusState mandatory
Indicate the state of the port.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.24062.2.2.1.3.2.1.1.4
portStatusSpeedDuplex mandatory
Indicate the speed and duplex mode of the port.
Enumeration
Enumerated Values:
1autoNegotiation
2tenMbpsHalfDuplex
3tenMbpsFullDuplex
4hundredMbpsHalfDuplex
5hundredMbpsFullDuplex
6thousandMbpsFullDuplex
 .1.3.6.1.4.1.24062.2.2.1.3.2.1.1.5
portStatusFlowCtrl mandatory
Indicate the flow control status of the port.
Enumeration
Enumerated Values:
1disable
2symmetric
 .1.3.6.1.4.1.24062.2.2.1.3.2.1.1.6
sfpVender mandatory
The vender name of the Small Form Pluggable (SFP) optical
transceiver module.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.24062.2.2.1.3.2.1.1.7
sfpWavelength mandatory
The wave length in nanometers (nm) of the Small Form
Pluggable (SFP) optical transceiver module.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.3.2.1.1.8
sfpDistance mandatory
The maximum transimission distance in meters of the Small
Form Pluggable (SFP) optical transceiver module.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.3.2.1.1.9

portSfpTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.3.2.2 · 1 row entry · 10 columns
Open in standard view 
Table of descriptive information about SFP
portSfpEntry entry .1.3.6.1.4.1.24062.2.2.1.3.2.2.1
An entry containing SFP information of a port.
Indexes
portSfpIndex
Column Syntax OID
portSfpIndex mandatory
Index of port SFP table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.3.2.2.1.1
portSfpEject mandatory
Eject SFP
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.3.2.2.1.2
portSfpScan mandatory
Scan SFP
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.3.2.2.1.3
portSfpDdmStatus mandatory
(1)Enable SFP digital diagnostic and monitoring.
(2)Disable SFP digital diagnostic and monitoring.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.24062.2.2.1.3.2.2.1.4
portSfpDdmTempatureCurrent mandatory
The current SFP Tempature of port.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.24062.2.2.1.3.2.2.1.5
portSfpDdmTempatureRange mandatory
The range of SFP Tempature of port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.24062.2.2.1.3.2.2.1.6
portSfpDdmTxPowerCurrent mandatory
The current SFP Transmitted Power of port.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.24062.2.2.1.3.2.2.1.7
portSfpDdmTxPowerRange mandatory
The range of SFP Transmitted Power of port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.24062.2.2.1.3.2.2.1.8
portSfpDdmRxPowerCurrent mandatory
The current SFP Receiveed Power of port.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.24062.2.2.1.3.2.2.1.9
portSfpDdmRxPowerRange mandatory
The range of SFP Receiveed Power of port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.24062.2.2.1.3.2.2.1.10

rateLimitingTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.3.3.1 · 1 row entry · 4 columns
Open in standard view 
Table of descriptive information and configuration about 
port rate limiting. You can set up bandwidth rate and packet 
limitation type for each ports.
          
Rate limiting is used to control the rate of traffic sent or 
received on a network interface. For ingress rate limiting, 
traffic that is less than or equal to the specified rate is 
received, whereas traffic that exceeds the rate is dropped.
For egress rate limiting, traffic that is less than or equal 
to the specified rate is sent, whereas traffic that exceeds 
the rate is dropped.
rateLimitingEntry entry .1.3.6.1.4.1.24062.2.2.1.3.3.1.1
An entry containing information and configuration about
port rate limiting.
Indexes
rateLimitingPortNum
Column Syntax OID
rateLimitingPortNum mandatory
The port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.3.3.1.1.1
rateLimitingIngressLimitType mandatory
The type of ingress packets to be filtered.
Enumerationr/w
Enumerated Values:
1all
2broadcastMulticastFloodedUnicast
3broadcastMulticast
4broadcastOnly
 .1.3.6.1.4.1.24062.2.2.1.3.3.1.1.2
rateLimitingIngressRate mandatory
Ingress rate in Mbps, the rate range is from 1 Mbps to 100 Mbps
and zero means no limit.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.3.3.1.1.3
rateLimitingEgressRate mandatory
Egress rate in Mbps, the rate range is from 1 Mbps to 100 Mbps
and zero means no limit. Egress rate limiting has effect on
all types of packets, including unicast, multicast and
broadcast packets.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.3.3.1.1.4

portTrunkAggregatorSettingTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.3.4.1.1 · 1 row entry · 3 columns
Open in standard view 
Table of descriptive information and configuration about
of each trunk group in this system.
          
Link aggregation, or IEEE 802.3ad, is a method of combining 
physical network links into a single logical link for 
increased bandwidth. With Link aggregation we are able to 
increase the capacity and availability of the communications 
channel between devices (both switches and end stations) 
using existing Fast Ethernet and Gigabit Ethernet technology. 
Two or more Gigabit Ethernet connections are combined in 
order to increase the bandwidth capability and to create 
resilient and redundant links. A set of multiple parallel 
physical links between two devices is grouped together to 
form a single logical link. 
          
Link Aggregation also provides load balancing where the 
processing and communications activity is distributed across 
the links in a trunk so that no single link is overwhelmed.
portTrunkAggregatorSettingEntry entry .1.3.6.1.4.1.24062.2.2.1.3.4.1.1.1
Information controlling aggregator configuration.
Indexes
portTrunkPortIndex
Column Syntax OID
portTrunkPortIndex mandatory
The port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.3.4.1.1.1.1
portTrunkAggregatorGroupId mandatory
Trunk group Id. Upto 8 ports can be aggregated into
a group and 5 groups can be configured in the device.
Enumerationr/w
Enumerated Values:
1trunkGroup1
2trunkGroup2
3trunkGroup3
4trunkGroup4
5trunkGroup5
6none
 .1.3.6.1.4.1.24062.2.2.1.3.4.1.1.1.2
portTrunkAggregatorType mandatory
The Aggregator type. You can assign the aggregator staticly
by setting to static(1), or setting to lacp(2) to enable the
LACP protocol.

The Link Aggregation Control Protocol (LACP) is required for
dyn…
Enumerationr/w
Enumerated Values:
1static
2lacp
 .1.3.6.1.4.1.24062.2.2.1.3.4.1.1.1.3

portTrunkAggregatorStatusTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.3.4.2.1 · 1 row entry · 5 columns
Open in standard view 
Table of descriptive information about trunk groups in 
the device.
portTrunkAggregatorStatusEntry entry .1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1
An entry containing information about current configuration
of trunk groups.
Indexes
portTrunkAggregatorGroupIndex
Column Syntax OID
portTrunkAggregatorGroupIndex mandatory
The trunk group identifier.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1.1
portTrunkAggregatorGroupType mandatory
The Aggregator type.
(1) The trunk group is LACP disabled and configured staticly
by administrator.
(2) The trunk group is LACP enabled.
Enumeration
Enumerated Values:
1static
2lacp
 .1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1.2
portTrunkAggregatorGroupMember mandatory
The ports are aggregated with other ports.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1.3
portTrunkAggregatorIndividual mandatory
A port is LACP enabled but not aggregated with other ports.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1.4
portTrunkAggregatorLinkDown mandatory
The ports which are linked down.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.3.4.2.1.1.5

multipleSuperRingConfigTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.4.4.1 · 1 row entry · 13 columns
Open in standard view 
Table of configuration about redundany protocol in the device.
multipleSuperRingConfigEntry entry .1.3.6.1.4.1.24062.2.2.1.4.4.1.1
An entry containing information about current configuration
of rings.
Indexes
superRingConfigId
Column Syntax OID
superRingConfigId mandatory
Ring Id.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.1
superRingName mandatory
Super Ring name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.2
superRingConfigVersion mandatory
Super Ring funtion version selection.
Super Ring: Backward compatible with legacy super ring mechanism.
Note: This model supports v1 non-Redundancy Management mode only.
Rapid Super Ring: New mechanism. The recovery …
Enumerationr/w
Enumerated Values:
1superRing
2rapidSuperRing
3anyRing
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.3
superRingDevicePriority mandatory
Super Ring device priority setting.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.4
superRingRingPort1 mandatory
RingPort1 should not equal to RingRort2.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.5
superRingRingPort2 mandatory
RingPort2 should not equal to RingRort1.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.6
superRingRingPort1PathCost mandatory Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.7
superRingRingPort2PathCost mandatory Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.8
superRingRapidDualHomingStatus mandatory
Rapid Dual Homing funtion status.
Rapid Dual Homing is a redundancy protocol,
which is compatible with RSTP.
(1) Rapid Dual Homing function is enabled.
(2) Rapid Dual Homing function is disabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.9
superRingStatus mandatory
Status of this ring.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.10
superChainStatus mandatory
Status of this chain.
Enumerationr/w
Enumerated Values:
0disabled
1member
2border
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.11
superChainEdgePort mandatory
EdgePort of the chain.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.12
superRingRapidDualHomingExtensionId mandatory
Rapid Dual Homing Extension ID.
The Extension ID and Ring ID cannot be the same, when dual home to the same foreing network.
The Extension ID range from 0 to 7.
With the combination of Extension ID(0 to 7) and R…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.24062.2.2.1.4.4.1.1.13

multipleSuperRingStatusTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.4.4.2 · 1 row entry · 12 columns
Open in standard view 
Table of status information about redundany protocol in 
the device.
multipleSuperRingStatusEntry entry .1.3.6.1.4.1.24062.2.2.1.4.4.2.1
An entry containing information about current status
of rings.
Indexes
superRingStatusId
Column Syntax OID
superRingStatusId mandatory
Ring Id.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.1
superRingVersion mandatory
Super Ring funtion version selection.
Super Ring: Backward compatible with legacy super ring mechanism.
Note: This model supports v1 non-Redundancy Management mode only.
Rapid Super Ring: New mechanism. The recovery …
Enumeration
Enumerated Values:
1superRing
2rapidSuperRing
3anyRing
4notSupported
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.2
superRingDeviceRole mandatory
Super Ring role status.
(1) disabled.
(2) Redundancy manager.
(3) Non redundancy manager.
Enumeration
Enumerated Values:
1disabled
2rm
3non-RM
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.3
superRingRingPortList1 mandatory
Port list for ring port1.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.4
superRingRingPortList2 mandatory
Port list for ring port2.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.5
superRingRingStatus mandatory
Super Ring ring status.
(1) Disabled - The ring on this device is disabled.
(1) Normal - Ring is complete.
(2) Abnormal - Ring is not complete.
Enumeration
Enumerated Values:
1disabled
2normal
3abnormal
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.6
superRingRmMac mandatory
RM mac address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.7
superRingBlockedPort mandatory
The blocked ports in ring Normal state.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.8
superRingRoleTransitionCount mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.9
superRingRingStateTransitionCount mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.10
superChainRole mandatory Enumeration
Enumerated Values:
0disabled
1member
2border
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.11
superChainEdgePortList mandatory
Edge Port list for SuperChain.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.4.4.2.1.12

stpPerPortCfgTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.4.5.7 · 1 row entry · 5 columns
Open in standard view 
Table of descriptive information and configuration about
STP on each port.
stpPerPortCfgEntry entry .1.3.6.1.4.1.24062.2.2.1.4.5.7.1
Information configuring STP on a port.
Indexes
stpPerPortCfgPortNum
Column Syntax OID
stpPerPortCfgPortNum mandatory
The port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.5.7.1.1
stpPerPortCfgStpState mandatory
Enable/Disable STP/RSTP/MSTP at this port. Disable STP state
when connecting a device in order to avoid STP waiting periods.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.4.5.7.1.2
stpPerPortCfgPathCost mandatory
The cost of the path to the other bridge from this
transmitting bridge at the specified port. Enter a number from
1 through 200000000.
(0 will auto set path cost to standard recommended value)
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.5.7.1.3
stpPerPortCfgLinkType mandatory
Some of the rapid state transactions that are
possible within RSTP are dependent upon whether
the Port concerned can only be connected to
exactly one other Bridge(ie., it is served by a
point-to-point LAN segment), or c…
Enumerationr/w
Enumerated Values:
1auto
2point2Point
3shared
4notSupport
 .1.3.6.1.4.1.24062.2.2.1.4.5.7.1.5
stpPerPortCfgEdgePort mandatory
Present in implementations that support the
identification of edge ports. All ports
directly connected to end stations cannot
create bridging loops in the network and can
thus directly transition to forwarding,
skipping…
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.24062.2.2.1.4.5.7.1.6

stpRootInformationTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.4.6.1 · 1 row entry · 8 columns
Open in standard view 
Table of descriptive information about root bridge
of rapid spanning tree in this system.
stpRootInformationEntry entry .1.3.6.1.4.1.24062.2.2.1.4.6.1.1
An entry in the table, containing information
about root bridge information of the STP.
Indexes
stpRootInformationIndex
Column Syntax OID
stpRootInformationIndex mandatory
Index of root bridge information table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.6.1.1.1
stpRootInformationRootAddress mandatory
Root Address.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.24062.2.2.1.4.6.1.1.2
stpRootInformationRootPriority mandatory
Root Priority.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.6.1.1.3
stpRootInformationRootPort mandatory
Root Port.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.24062.2.2.1.4.6.1.1.4
stpRootInformationRootPathCost mandatory
Root Path Cost.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.6.1.1.5
stpRootInformationMaxAge mandatory
Max Age.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.6.1.1.6
stpRootInformationHelloTime mandatory
Hello Time.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.6.1.1.7
stpRootInformationForwardDelay mandatory
Forward Delay Time.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.6.1.1.8

stpPerPortInfoTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.4.6.2 · 1 row entry · 7 columns
Open in standard view 
Table of descriptive information and configuration about
rapid spanning tree (Per port).
stpPerPortInfoEntry entry .1.3.6.1.4.1.24062.2.2.1.4.6.2.1
An entry in the table, containing inforamtion
about STP (Per port).
Indexes
stpPerPortInfoPortNum
Column Syntax OID
stpPerPortInfoPortNum mandatory
Port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.6.2.1.1
stpPerPortInfoRole mandatory
Descriptive information about RSTP switch port roles:
root(1) A forwarding port that has been elected for
the spanning-tree topology.
alternate(2) An alternate path to the root bridge. This …
Enumeration
Enumerated Values:
1root
2alternated
3designated
4backup
5disabled
6nonStp
7unknown
 .1.3.6.1.4.1.24062.2.2.1.4.6.2.1.2
stpPerPortInfoState mandatory Enumeration
Enumerated Values:
1disabled
2learning
3forwarding
4blocking
5unknown
6nonStp
 .1.3.6.1.4.1.24062.2.2.1.4.6.2.1.3
stpPerPortInfoPathCost mandatory
The cost of the path to the other bridge from
this transmitting bridge at the specified port.
Enter a number 1 through 200000000.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.6.2.1.4
stpPerPortInfoPriority mandatory
Decide which port should be blocked by priority
in LAN. Enter a number 0 through 240 in steps of
16.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.6.2.1.5
stpPerPortInfoLinkType mandatory
Some of the rapid state transactions that are
possible within RSTP are dependent upon whether
the Port concerned can only be connected to
exactly one other Bridge(ie., it is served by a
point-to-point LAN segment), or c…
Enumeration
Enumerated Values:
1auto
2point2Point
3shared
4notSupport
 .1.3.6.1.4.1.24062.2.2.1.4.6.2.1.6
stpPerPortInfoEdgePort mandatory
Present in implementations that support the
identification of edge ports. All ports
directly connected to end stations cannot
create bridging loops in the network and can
thus directly transition to forwarding,
skipping…
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.24062.2.2.1.4.6.2.1.7

mstpPerInstCfgTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.4.7.3 · 1 row entry · 3 columns
Open in standard view 
Table of descriptive information and configuration about
STP on each port.
mstpPerInstCfgEntry entry .1.3.6.1.4.1.24062.2.2.1.4.7.3.1
Information configuring MSTP on a instance.
Indexes
mstpPerInstCfgInstanceID
Column Syntax OID
mstpPerInstCfgInstanceID mandatory
The instance ID.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.7.3.1.1
mstpPerInstCfgVlanGroup mandatory
VLAN group of instance.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.24062.2.2.1.4.7.3.1.2
mstpPerInstCfgStatus mandatory
Status of this Instance.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.4.7.3.1.4

mstpPerPortCfgTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.4.7.4 · 1 row entry · 6 columns
Open in standard view 
Table of descriptive information and configuration about
MSTP on each port.
mstpPerPortCfgEntry entry .1.3.6.1.4.1.24062.2.2.1.4.7.4.1
Information configuring MSTP on a port.
Indexes
mstpPerPortCfgIndex
Column Syntax OID
mstpPerPortCfgIndex mandatory
The index of MstpPerPortCfgEntry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.7.4.1.1
mstpPerPortCfgInstanceID mandatory
The instance ID.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.7.4.1.2
mstpPerPortCfgPortNum mandatory
The port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.7.4.1.3
mstpPerPortCfgPathCost mandatory
The cost of the path to the other bridge from this
transmitting bridge at the specified port. Enter a number from
1 through 200000000.
(0 will auto set path cost to standard recommended value)
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.7.4.1.4
mstpPerPortCfgLinkType mandatory
Some of the rapid state transactions that are
possible within RSTP are dependent upon whether
the Port concerned can only be connected to
exactly one other Bridge(ie., it is served by a
point-to-point LAN segment), or c…
Enumerationr/w
Enumerated Values:
1auto
2point2Point
3shared
4notSupport
 .1.3.6.1.4.1.24062.2.2.1.4.7.4.1.6
mstpPerPortCfgEdgePort mandatory
Present in implementations that support the
identification of edge ports. All ports
directly connected to end stations cannot
create bridging loops in the network and can
thus directly transition to forwarding,
skipping…
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.24062.2.2.1.4.7.4.1.7

mstpRootInformationTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.4.8.1 · 1 row entry · 8 columns
Open in standard view 
Table of descriptive information about root bridge
of rapid spanning tree in this system.
mstpRootInformationEntry entry .1.3.6.1.4.1.24062.2.2.1.4.8.1.1
An entry in the table, containing information
about root bridge information of the MSTP.
Indexes
mstpRootInformationInstanceID
Column Syntax OID
mstpRootInformationInstanceID mandatory
The instance ID.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.8.1.1.1
mstpRootInformationRootAddress mandatory
Root Address.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.24062.2.2.1.4.8.1.1.2
mstpRootInformationRootPriority mandatory
Root Priority.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.8.1.1.3
mstpRootInformationRootPort mandatory
Root Port.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.24062.2.2.1.4.8.1.1.4
mstpRootInformationRootPathCost mandatory
Root Path Cost.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.8.1.1.5
mstpRootInformationMaxAge mandatory
Max Age.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.8.1.1.6
mstpRootInformationHelloTime mandatory
Hello Time.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.8.1.1.7
mstpRootInformationForwardDelay mandatory
Forward Delay Time.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.8.1.1.8

mstpPerPortInfoTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.4.8.2 · 1 row entry · 9 columns
Open in standard view 
Table of descriptive information and configuration about
rapid spanning tree (Per port).
mstpPerPortInfoEntry entry .1.3.6.1.4.1.24062.2.2.1.4.8.2.1
An entry in the table, containing information
about MSTP (Per port).
Indexes
mstpPerPortInfoIndex
Column Syntax OID
mstpPerPortInfoIndex mandatory
The index of MstpPerPortInfoEntry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.8.2.1.1
mstpPerPortInfoInstanceID mandatory
The instance ID.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.8.2.1.2
mstpPerPortInfoPortNum mandatory
Port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.8.2.1.3
mstpPerPortInfoRole mandatory
Descriptive information about MSTP switch port roles:
disabled(1) MSTP is disabled on this port.
root(2) A forwarding port that has been elected for
the spanning-tree topology.
designated(3) A…
Enumeration
Enumerated Values:
1root
2alternate
3designated
4backup
5master
6disabled
7boundary
8unknown
 .1.3.6.1.4.1.24062.2.2.1.4.8.2.1.4
mstpPerPortInfoState mandatory Enumeration
Enumerated Values:
1disabled
2listening
3learning
4forwarding
5blocking
6unknown
 .1.3.6.1.4.1.24062.2.2.1.4.8.2.1.5
mstpPerPortInfoPathCost mandatory
The cost of the path to the other bridge from
this transmitting bridge at the specified port.
Enter a number 1 through 200000000.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.8.2.1.6
mstpPerPortInfoPriority mandatory
Decide which port should be blocked by priority
in LAN. Enter a number 0 through 240 in steps of
16.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.4.8.2.1.7
mstpPerPortInfoLinkType mandatory
Some of the rapid state transactions that are
possible within MSTP are dependent upon whether
the Port concerned can only be connected to
exactly one other Bridge(ie., it is served by a
point-to-point LAN segment), or c…
Enumeration
Enumerated Values:
1p2p-bound-stp
2p2p-bound-rstp
3p2p-bound-mstp
4p2p-internal-mstp
5shared-bound-stp
6shared-bound-rstp
7shared-bound-mstp
8shared-internal-mstp
 .1.3.6.1.4.1.24062.2.2.1.4.8.2.1.8
mstpPerPortInfoEdgePort mandatory
Present in implementations that support the
identification of edge ports. All ports
directly connected to end stations cannot
create bridging loops in the network and can
thus directly transition to forwarding,
skipping…
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.24062.2.2.1.4.8.2.1.9

dot1qPortVlanTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.5.2.1 · 1 row entry · 4 columns
Open in standard view 
A table containing per port control and status information 
for IEEE802.1Q VLAN configuration in the device.
dot1qPortVlanEntry entry .1.3.6.1.4.1.24062.2.2.1.5.2.1.1
Information controlling IEEE802.1Q VLAN configuration for
a port on the device.
Indexes
dot1qPortIndex
Column Syntax OID
dot1qPortIndex mandatory
The port identifier.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.24062.2.2.1.5.2.1.1.1
dot1qPvid mandatory
The default Port VID, the VLAN ID assigned to an untagged
frame or a Priority-Tagged frame received on the port.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.24062.2.2.1.5.2.1.1.2
dot1qPortAcceptableFrameTypes mandatory
When admitOnlyVlanTagged(2) the device will discard untagged
frames or Priority-Tagged only frames received on this port.
When admitAll(1), untagged frames or Priority-Tagged only
frames received on this port will be…
Enumerationr/w
Enumerated Values:
1admitAll
2admitOnlyVlanTagged
 .1.3.6.1.4.1.24062.2.2.1.5.2.1.1.3
dot1qPortIngressFiltering mandatory
When true(1) the device will discard incoming frames whose
VLAN classification do not include this port in its Member set.
When false(2), the port will accept all incoming frames
regardless its VLAN classification.
T…
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.24062.2.2.1.5.2.1.1.4

dot1qVlanStaticTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.5.2.2 · 1 row entry · 6 columns
Open in standard view 
A table containing configuration information for each VLAN 
configured into the device by management. All entries are 
permanent and will be restored after the device is reset.
Upto 64 VLANs can be configured in this device.
          
IEEE 802.1Q Virtual LANs (VLANs) allow a single physical LAN 
to be partitioned into several smaller logical LANs. VLANs 
limit the broadcast domain, improve security and performance 
and are ideal for separating systems or departments from each 
other.
dot1qVlanStaticEntry entry .1.3.6.1.4.1.24062.2.2.1.5.2.2.1
Static information of a VLAN configured into the device by
management.
Indexes
dot1qVlanIndex
Column Syntax OID
dot1qVlanIndex mandatory
The VLAN Identifier (VID) refering to this VLAN. The valid
range is from 1 to 4094.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.24062.2.2.1.5.2.2.1.1
dot1qVlanStaticName mandatory
An administratively assigned string, which is used to identify
the VLAN.
OctetStringr/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.24062.2.2.1.5.2.2.1.2
dot1qVlanStaticEgressPorts mandatory
The set of ports which are permanently configured to
transmitting traffic for this VLAN as either tagged or
untagged frames.

Each octet within this value specifies a set of eight
ports, with the first o…
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.5.2.2.1.3
dot1qVlanStaticUntaggedPorts mandatory
The set of ports which are permanently configured to
transmitting traffic for this VLAN as untagged frames.

Each octet within this value specifies a set of eight
ports, with the first octet specifying po…
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.5.2.2.1.4
dot1qVlanStaticTaggedPorts mandatory
The set of ports which are permanently configured to
transmitting traffic for this VLAN as tagged frames.

Each octet within this value specifies a set of eight
ports, with the first octet specifying port…
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.5.2.2.1.5
dot1qVlanStaticRowStatus mandatory
This object is used to manage to creation and deletion of
a VLAN, and is used to indicate the status of this entry.

To Creating and activate a VLAN, first select a unused VID for
dot1qVlanIndex and then…
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.5.2.2.1.6

dot1qPortGvrpTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.5.2.3.2 · 1 row entry · 5 columns
Open in standard view 
A table containing per port control and status information 
for GVRP configuration in the device.
dot1qPortGvrpEntry entry .1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1
Information controlling GVRP configuration for a port on the
device.
Indexes
dot1qPortGvrpIndex
Column Syntax OID
dot1qPortGvrpIndex mandatory
The port identifier.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1.1
dot1qPortGvrpStatus mandatory
The state of GVRP operation on this port. The value enabled(1)
indicates that GVRP is enabled on this port, as long as
dot1qGvrpStatus is also enabled for this device. When disabled(2)
but dot1qGvrpStatus is still e…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1.2
dot1qPortGarpJoinTimer mandatory
The GARP Join timer, in centiseconds.
SNMPv2-TCTimeIntervalr/w
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1.3
dot1qPortGarpLeaveTimer mandatory
The GARP Leave time, in centiseconds.
SNMPv2-TCTimeIntervalr/w
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1.4
dot1qPortGarpLeaveAllTimer mandatory
The GARP LeaveAll time, in centiseconds.
SNMPv2-TCTimeIntervalr/w
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.24062.2.2.1.5.2.3.2.1.5

dot1qVlanCurrentTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.5.2.4 · 1 row entry · 4 columns
Open in standard view 
A table containing information about currently configured 
VLANs, either by (local or network) management, or dynamically 
created as a result of GVRP requests received.
dot1qVlanCurrentEntry entry .1.3.6.1.4.1.24062.2.2.1.5.2.4.1
Information for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received.
Indexes
dot1qVlanCurrentIndex
Column Syntax OID
dot1qVlanCurrentIndex mandatory
The VLAN Identifier (VID) refering to this VLAN.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.5.2.4.1.1
dot1qVlanCurrentEgressPorts mandatory
The set of ports which are transmitting traffic for
this VLAN as either tagged or untagged frames.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.5.2.4.1.2
dot1qVlanCurrentUntaggedPorts mandatory
The set of ports which are transmitting traffic for
this VLAN as untagged frames.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.5.2.4.1.3
dot1qVlanStatus mandatory
This object indicates the status of this entry.
other(1) - this entry is currently in use but the
conditions under which it will remain so differ
from the following values.
permanent(2) - this entry, correspondi…
Enumeration
Enumerated Values:
1other
2permanent
3dynamicGvrp
 .1.3.6.1.4.1.24062.2.2.1.5.2.4.1.4

dot1qTunnelPortTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.5.2.5.2 · 1 row entry · 2 columns
Open in standard view 
A table containing per tunnel access or uplink port information in the device.
dot1qTunnelPortEntry entry .1.3.6.1.4.1.24062.2.2.1.5.2.5.2.1
Information controlling tunnel configuration for a port on the device.
Indexes
dot1qTunnelPortIndex
Column Syntax OID
dot1qTunnelPortIndex mandatory
The port identifier.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.5.2.5.2.1.1
dot1qTunnelPortMode mandatory
Tunnel mode controls
Enumerationr/w
Enumerated Values:
1normal
2access
3uplink
4uplink-add-pvid
 .1.3.6.1.4.1.24062.2.2.1.5.2.5.2.1.2

privateVlanIdTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.5.3.1 · 1 row entry · 2 columns
Open in standard view 
A table containing per Private VLAN ID information in the device.
privateVlanIdEntry entry .1.3.6.1.4.1.24062.2.2.1.5.3.1.1
Information controlling Private VLAN ID configuration on the device.
Indexes
privateVlanId
Column Syntax OID
privateVlanId mandatory
The Private VLAN ID.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.5.3.1.1.1
privateVlanIdType mandatory
Private VLAN ID type controls
Enumerationr/w
Enumerated Values:
1normal
2community
3isolated
4primary
 .1.3.6.1.4.1.24062.2.2.1.5.3.1.1.2

privateVlanPortTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.5.3.2 · 1 row entry · 2 columns
Open in standard view 
A table containing per Private VLAN Port information in the device.
privateVlanPortEntry entry .1.3.6.1.4.1.24062.2.2.1.5.3.2.1
Information controlling Private VLAN Port configuration on the device.
Indexes
privateVlanPortIndex
Column Syntax OID
privateVlanPortIndex mandatory
The Private Port Index.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.5.3.2.1.1
privateVlanPortMode mandatory
Private VLAN Port mode controls
Enumerationr/w
Enumerated Values:
1normal
2host
3promiscuous
 .1.3.6.1.4.1.24062.2.2.1.5.3.2.1.2

privateVlanHostAssociationTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.5.3.3 · 1 row entry · 3 columns
Open in standard view 
A table containing per Private VLAN host port association information in the device.
privateVlanHostAssociationEntry entry .1.3.6.1.4.1.24062.2.2.1.5.3.3.1
Information controlling Private VLAN host port association configuration on the device.
Indexes
privateVlanHostAssociationPortIndex
Column Syntax OID
privateVlanHostAssociationPortIndex mandatory
The Private Host Port Index.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.24062.2.2.1.5.3.3.1.1
privateVlanHostAssociationPrimaryVid mandatory
Private VLAN host Port association primary VLAN ID. If enter 0 then clear setting.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.5.3.3.1.2
privateVlanHostAssociationSecondaryVid mandatory
Private VLAN host Port association secondary VLAN ID(isolated/community). If enter 0 then clear setting.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.5.3.3.1.3

privateVlanMappingTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.5.3.4 · 1 row entry · 3 columns
Open in standard view 
A table containing per Private VLAN promiscuous port mapping information in the device.
privateVlanMappingEntry entry .1.3.6.1.4.1.24062.2.2.1.5.3.4.1
Information controlling Private VLAN promiscuous port mapping configuration on the device.
Indexes
privateVlanMappingPromiscuousPortIndex
Column Syntax OID
privateVlanMappingPromiscuousPortIndex mandatory
The Private Promiscuous Port Index.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.24062.2.2.1.5.3.4.1.1
privateVlanMappingPrimaryVid mandatory
Private VLAN promiscuous Port mapping primary VLAN ID. If enter 0 then clear setting.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.5.3.4.1.2
privateVlanMappingSecondaryVidList mandatory
Private VLAN promiscuous Port mapping secondary VLAN ID list. If enter zero-length string then clear setting.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.24062.2.2.1.5.3.4.1.3

qosPortDefaultCosTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.6.2 · 1 row entry · 2 columns
Open in standard view 
Table of descriptive information and configuration about
port default cos value.
qosPortDefaultCosEntry entry .1.3.6.1.4.1.24062.2.2.1.6.2.1
An entry in the table, containing inforamtion
about port default cos value.
Indexes
qosPortNum
Column Syntax OID
qosPortNum mandatory
Port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.6.2.1.1
qosPortDefaultCos mandatory
The port priority will follow the default port priority
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.24062.2.2.1.6.2.1.3

qosCOSTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.6.3 · 1 row entry · 2 columns
Open in standard view 
Table of descriptive information and configuration about
COS QOS.
qosCOSEntry entry .1.3.6.1.4.1.24062.2.2.1.6.3.1
An entry in the table, containing inforamtion about COS QOS.
Indexes
qosCOSPriority
Column Syntax OID
qosCOSPriority mandatory
COS priority.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.24062.2.2.1.6.3.1.1
qosCOS mandatory
The port priority will follow the COS priority
that you have assigned (0)low, (1)middle, (2)high,
or (3)highest.
Enumerationr/w
Enumerated Values:
0low
1middle
2high
3highest
 .1.3.6.1.4.1.24062.2.2.1.6.3.1.2

qosDscpTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.6.4 · 1 row entry · 2 columns
Open in standard view 
Table of descriptive information and configuration about
DSCP QOS.
qosDscpEntry entry .1.3.6.1.4.1.24062.2.2.1.6.4.1
An entry in the table, containing inforamtion
about DSCP QOS.
Indexes
qosDscpPriority
Column Syntax OID
qosDscpPriority mandatory
Dscp priority.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.24062.2.2.1.6.4.1.1
qosDscp mandatory
The port priority will follow the Dscp priority
that you have assigned
(0)low (1)middle, (2)high, (3)highest.
Enumerationr/w
Enumerated Values:
0low
1middle
2high
3highest
 .1.3.6.1.4.1.24062.2.2.1.6.4.1.2

igmpSnoopingTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.7.2.2 · 1 row entry · 2 columns
Open in standard view 
Table of descriptive information about on which vlan is IGMP 
snooping enabled.
igmpSnoopingEntry entry .1.3.6.1.4.1.24062.2.2.1.7.2.2.1
Inforamtion enabling or disabling IGMP snooping on a vlan.
Indexes
igmpSnoopingEntryVID
Column Syntax OID
igmpSnoopingEntryVID mandatory
The vlan id.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.7.2.2.1.1
igmpSnoopingEntryStatus mandatory
The state of igmp snooping functionality on a vlan.
Set to enabled(1) indicates that igmp snooping is enabled on
the vlan. When igmpSnoopingStatus is also turned on, each IGMP
packets on the vlan will be processed.
Wh…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.24062.2.2.1.7.2.2.1.2

igmpSnoopingGroupTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.7.2.3 · 1 row entry · 3 columns
Open in standard view 
Table of descriptive information about IGMP snooped multicast 
groups.
igmpSnoopingGroupEntry entry .1.3.6.1.4.1.24062.2.2.1.7.2.3.1
Information containing a multicast group and its member ports.
Indexes
igmpSnoopingGroupEntryVID igmpSnoopingGroupEntryIPAddr
Column Syntax OID
igmpSnoopingGroupEntryVID mandatory
The VLAN ID of an IGMP entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.7.2.3.1.1
igmpSnoopingGroupEntryIPAddr mandatory
The multicast group IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.7.2.3.1.2
igmpSnoopingGroupEntryMembers mandatory
The member ports of the group.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.7.2.3.1.3

snmpCommunityStringTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.8.1 · 1 row entry · 4 columns
Open in standard view 
Table of information configuring community strings of 
SNMP agent.
          
An SNMP community string is a text string that acts as 
a password. It is used to authenticate messages that 
are sent between the management station (the SNMP manager) 
and the device (the SNMP agent). The community string is 
included in every packet that is transmitted between the 
SNMP manager and the SNMP agent. 
          
After receiving an SNMP request, the SNMP agent compares 
the community string in the request to the community 
strings that are configured for the agent. The requests 
are valid under these circumstances: 
          
- Only SNMP Get and Get-next requests are valid if the 
  community string in the request matches the read-only 
  community. 
          
- SNMP Get, Get-next, and Set requests are valid if the 
  community string in the request matches the agent's 
  read-write community.
          
By default, 'public' is the read-only community and 
'private' is the read-write community. Total 4 community
strings are allowed to configure in the device.
snmpCommunityStringEntry entry .1.3.6.1.4.1.24062.2.2.1.8.1.1
Inforamtion configuring an community string.
Indexes
snmpCommunityStringIndex
Column Syntax OID
snmpCommunityStringIndex mandatory
Index of community string.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.8.1.1.1
snmpCommunityStringName mandatory
A community string with maximum 32 characters.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.24062.2.2.1.8.1.1.2
snmpCommunityStringPrivilege mandatory
The access privilege of the community string.
Enumerationr/w
Enumerated Values:
1ro
2rw
 .1.3.6.1.4.1.24062.2.2.1.8.1.1.3
snmpCommunityStringStatus mandatory
The status of this entry. Set to (5)createAndWait
to create a new entry. A new entry or an active
entry can be edited. Once an entry is modified,
its status becomes (3)notReady. Set to (1)active
to apply the modificati…
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.8.1.1.4

snmpV3UserTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.8.2 · 1 row entry · 7 columns
Open in standard view 
Table of descriptive and information about trap servers.
A trap server is the recipient of an SNMP trap. The device 
does not send a trap unless it knows to which station it 
should send a trap.
snmpV3UserEntry entry .1.3.6.1.4.1.24062.2.2.1.8.2.1
An entry in the table, containing inforamtion about a
trap server of SNMP agent.
Indexes
snmpTrapServerIndex
Column Syntax OID
snmpV3UserIndex mandatory
Index of snmp v3 user.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.8.2.1.1
snmpV3UserName mandatory SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.24062.2.2.1.8.2.1.2
snmpV3UserSecurityLevel mandatory
Specifiy the authentication and privacy level
- noauth(1) no authentication and no privacy.
- auth(2) enables MD5 or SHA packet authentication.
- priv(3) enables MD5 or SHA packet authentication
and DES …
Enumerationr/w
Enumerated Values:
1noauth
2auth
3priv
 .1.3.6.1.4.1.24062.2.2.1.8.2.1.3
snmpV3UserAuthProtocol mandatory
MD5(Message Digest 5) or SHA (Secure Hash Algorithm)
Enumerationr/w
Enumerated Values:
1none
2md5
3sha
 .1.3.6.1.4.1.24062.2.2.1.8.2.1.4
snmpV3UserAuthPassword mandatory SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.24062.2.2.1.8.2.1.5
snmpV3UserDesPassword mandatory SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.24062.2.2.1.8.2.1.6
snmpV3UserStatus mandatory SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.8.2.1.7

snmpTrapServerTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.8.4 · 1 row entry · 5 columns
Open in standard view 
Table of descriptive and information about trap servers.
A trap server is the recipient of an SNMP trap. The device 
does not send a trap unless it knows to which station it 
should send a trap.
snmpTrapServerEntry entry .1.3.6.1.4.1.24062.2.2.1.8.4.1
An entry in the table, containing inforamtion about a
trap server of SNMP agent.
Indexes
snmpTrapServerIndex
Column Syntax OID
snmpTrapServerIndex mandatory
Index of trap server.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.8.4.1.1
snmpTrapServerIPAddr mandatory
Trap Server IP Address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.8.4.1.2
snmpTrapServerTrapComm mandatory
The community string of trap server. The password-like string
will be sent with the notification operation.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.24062.2.2.1.8.4.1.3
snmpTrapServerTrapVer mandatory
The trap version.
Enumerationr/w
Enumerated Values:
1v1
2v2c
 .1.3.6.1.4.1.24062.2.2.1.8.4.1.4
snmpTrapServerStatus mandatory
The status of this entry. Set to (5)createAndWait
to create a new entry. A new entry or an active
entry can be edited. Once an entry is modified,
its status becomes (3)notReady. Set to (1)active
to apply the modificati…
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.8.4.1.5

portSecurityStatusTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.9.1.1 · 1 row entry · 2 columns
Open in standard view 
A table containing information about port security status on 
each port.
          
Port security prevents a port from address learning. Only 
those MAC addresses that are configured by management are 
allowed to access the switch or transmit/receive through the
port. Upto 10 MAC addresses can assigned to each port by adding
address entries to portSecurityMacTable or macAddrTable. 
          
If the port security functionality is enabled but without any 
MAC address configured on a port, no traffic can access the 
switch or transmit/receive from the port.
portSecurityStatusEntry entry .1.3.6.1.4.1.24062.2.2.1.9.1.1.1
An entry configuring port security for a port.
Indexes
portSecurityPortIndex
Column Syntax OID
portSecurityPortIndex mandatory
The port id.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.1.1.1.1
portSecurityPortStatus mandatory
(1)enable port security on this port.
(2)disable port security on this port.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.9.1.1.1.2

portSecurityMacTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.9.1.2 · 1 row entry · 5 columns
Open in standard view 
Table configuring static unicast MAC address for each port.
          
When you add a static MAC address, it remains in the switch's 
address table, regardless of whether the device is physically 
connected to the switch.
          
With enabling port security in portSecurityStatusTable, only 
those MAC addresses configured in portSecurityMacTable are 
allowed to access the switch or transmit/receive through the
port.
portSecurityMacEntry entry .1.3.6.1.4.1.24062.2.2.1.9.1.2.1
An entry configuring a static unicast MAC addresses on a port.
Indexes
portSecurityMacIndex
Column Syntax OID
portSecurityMacIndex mandatory
Index of MAC.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.1.2.1.1
portSecurityPort mandatory
The port id.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.1.2.1.2
portSecurityVlanIndex mandatory
The vlan id where the MAC address belongs to.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.1.2.1.3
portSecurityMac mandatory
MAC address of the entry.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.24062.2.2.1.9.1.2.1.4
portSecurityMacStatus mandatory
The status of this entry. Set to (5)createAndWait
to create a new entry. A new entry or an active
entry can be edited. Once an entry is modified,
its status becomes (3)notReady. Set to (1)active
to apply the modificati…
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.9.1.2.1.5

ipSecurityTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.9.2.2 · 1 row entry · 3 columns
Open in standard view 
Table configuring IP addresses that can access and manage the 
device through network, such as telnet, web or SNMP. 
          
Please note that enabling IP security function but without 
adding the IP address of your current management station will 
break current management connection.
ipSecurityEntry entry .1.3.6.1.4.1.24062.2.2.1.9.2.2.1
An entry configuring an security IP address.
Indexes
ipSecurityIndex
Column Syntax OID
ipSecurityIndex mandatory
Index of IP address entry.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.24062.2.2.1.9.2.2.1.1
ipSecurityIP mandatory
An IP address that can access and manage the device.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.9.2.2.1.2
ipSecurityRowStatus mandatory
This object is used to manage to creation and deletion of
a authorized IP address, and is used to indicate the status
of this entry. A empty entry or an active entry can be edited.
Once an entry is modified, its stat…
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.9.2.2.1.3

radiusServerTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.9.3.3 · 1 row entry · 5 columns
Open in standard view 
.
radiusServerEntry entry .1.3.6.1.4.1.24062.2.2.1.9.3.3.1
.
Indexes
radiusServerIndex
Column Syntax OID
radiusServerIndex mandatory
Index of Radius server configuration.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.3.1.1
radiusServerIp mandatory
IP address of this radius server.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.9.3.3.1.2
radiusServerServerPort mandatory
The UDP port number used by the authentication server
to authenticate.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.3.1.3
radiusServerAccountingPort mandatory
Accounting Port: The UDP port number used by the authentication
server to retrieve accounting information.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.3.1.4
radiusServerSharedKey mandatory
A key shared between this switch and authentication server.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.24062.2.2.1.9.3.3.1.5

dot1xLocalUserTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.9.3.4 · 1 row entry · 4 columns
Open in standard view 
.
dot1xLocalUserEntry entry .1.3.6.1.4.1.24062.2.2.1.9.3.4.1
.
Indexes
dot1xLocalUserIndex
Column Syntax OID
dot1xLocalUserIndex mandatory
.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.4.1.1
dot1xLocalUserName mandatory
set this field to empty to remove this user config.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.24062.2.2.1.9.3.4.1.2
dot1xLocalUserPassword mandatory
.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.24062.2.2.1.9.3.4.1.3
dot1xLocalUserVid mandatory
.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.4.1.4

dot1xPortConfigTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.9.3.5 · 1 row entry · 10 columns
Open in standard view 
.
dot1xPortConfigEntry entry .1.3.6.1.4.1.24062.2.2.1.9.3.5.1
.
Indexes
dot1xPortConfigIndex
Column Syntax OID
dot1xPortConfigIndex mandatory
.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.5.1.1
dot1xPortAuthControl mandatory
.
Enumerationr/w
Enumerated Values:
1auto
2forceAuthorized
3forceUnauthorized
 .1.3.6.1.4.1.24062.2.2.1.9.3.5.1.2
dot1xPortReauthentication mandatory
.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.9.3.5.1.3
dot1xPortMaxRequest mandatory
.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.5.1.4
dot1xPortGuestVlan mandatory
.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.5.1.5
dot1xPortHostMode mandatory
.
Enumerationr/w
Enumerated Values:
1single
2multiple
 .1.3.6.1.4.1.24062.2.2.1.9.3.5.1.6
dot1xPortAdminDirection mandatory
.
Enumerationr/w
Enumerated Values:
1both
2in
 .1.3.6.1.4.1.24062.2.2.1.9.3.5.1.7
dot1xPortConfigSetDefault mandatory
.
Enumerationr/w
Enumerated Values:
1apply
 .1.3.6.1.4.1.24062.2.2.1.9.3.5.1.8
dot1xPortReinitialize mandatory
.
Enumerationr/w
Enumerated Values:
1apply
 .1.3.6.1.4.1.24062.2.2.1.9.3.5.1.9
dot1xPortClientReauth mandatory
.
Enumerationr/w
Enumerated Values:
1apply
 .1.3.6.1.4.1.24062.2.2.1.9.3.5.1.10

dot1xPortTimeoutConfigTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.9.3.6 · 1 row entry · 6 columns
Open in standard view 
.
dot1xPortTimeoutConfigEntry entry .1.3.6.1.4.1.24062.2.2.1.9.3.6.1
.
Indexes
dot1xPortTimeoutIndex
Column Syntax OID
dot1xPortTimeoutIndex mandatory
.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.6.1.1
dot1xPortReauthPeriod mandatory
.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.6.1.2
dot1xPortQuietPeriod mandatory
.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.6.1.3
dot1xPortTxPeriod mandatory
.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.6.1.4
dot1xPortSupplicantTimeout mandatory
.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.6.1.5
dot1xPortServerTimeout mandatory
.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.6.1.6

dot1xPortStatusTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.9.3.7 · 1 row entry · 5 columns
Open in standard view 
.
dot1xPortStatusEntry entry .1.3.6.1.4.1.24062.2.2.1.9.3.7.1
.
Indexes
dot1xPortStatusIndex
Column Syntax OID
dot1xPortStatusIndex mandatory
.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.9.3.7.1.1
dot1xPortCtrl mandatory
.
Enumeration
Enumerated Values:
1auto
2forceAuthorized
3forceUnauthorized
 .1.3.6.1.4.1.24062.2.2.1.9.3.7.1.2
dot1xPortAuthStatus mandatory
.
Enumeration
Enumerated Values:
1authorized
2unauthorized
 .1.3.6.1.4.1.24062.2.2.1.9.3.7.1.3
dot1xPortAuthSupplicant mandatory
.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.24062.2.2.1.9.3.7.1.4
dot1xPortOperDirection mandatory
.
Enumeration
Enumerated Values:
1both
2in
 .1.3.6.1.4.1.24062.2.2.1.9.3.7.1.5

faultRelayTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.10.1.1 · 1 row entry · 14 columns
Open in standard view 
Table of configuration about fault relay.
          
A fault relay is able to control an output circuit which is 
triggered by management defined fault events. There are two
fault relays in the device, each is controlled by an 
faultRelayEntry in this table. 
          
To configure a fault relay, first select the type of fault 
event which will trigger the relay in faultSelection, and 
then configure the related column.
          
Set faultRelayEntryStatus to active(1) to set the configuration
to the device.
faultRelayEntry entry .1.3.6.1.4.1.24062.2.2.1.10.1.1.1
A entry controlling a fault relay configuration.
Indexes
faultRelayId
Column Syntax OID
faultRelayId mandatory
Index of fault relay.
Enumeration
Enumerated Values:
1relay1
2relay2
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.1
diConfig mandatory
The fault relay will be triggered if digital input is low
or high.
Enumerationr/w
Enumerated Values:
1di1Low
2di1High
3di2Low
4di2High
5disable
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.2
dryOutputConfig mandatory
The dry output mechanism of fault relay will be enabled or disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.3
dryOutputOnPeriod mandatory
The fault relay will be closed after a period (in seconds).
Together with dryOutputOffPeriod, the fault relay can
be configured to continue on and off.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.4
dryOutputOffPeriod mandatory
The fault relay will be opened after a period (in seconds).
Together with dryOutputOnPeriod, the fault relay can
be configured to continue on and off.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.5
powerFailureConfig mandatory
The fault relay will be triggered if the configured
power fails. Any means either power 1 or power2 fails
Enumerationr/w
Enumerated Values:
1power1
2power2
3disable
255any
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.6
linkFailureConfig mandatory
The fault relay will be trigger if any of the configured
links fails.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.7
pingConfig mandatory
The ping failure mechanism of fault relay will be enabled or disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.8
pingIP mandatory
The fault relay will be trigger if fail to ping the assigned
IP address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.9
pingResetConfig mandatory
The ping reset mechanism of fault relay will be enabled or disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.10
pingResetIP mandatory
The fault relay will be trigger if fail to ping the assigned
IP address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.11
pingResetTime mandatory
Reset the ping process after pingResetTime, and then wait
pingHoldTime to ping again.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.12
pingResetHoldTime mandatory
Reset the ping process after pingResetTime, and then wait
pingHoldTime to ping again.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.13
ringFailureConfig mandatory
The fault relay will be triggered if the configured
ring fails.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.1.1.1.14

systemEventTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.10.2.1.1 · 1 row entry · 14 columns
Open in standard view 
Table of descriptive information and controls the reactions 
to system events.
          
Three types of reactions will be triggered: (1)logging in the 
switch or send logs to remote syslog servers, (2)sending an 
email, or (3)send an snmp trap. Each type of alert is configured 
in sysLogConfiguration, smtpConfiguration, snmpTrapServerEnable 
and snmpTrapServerTable.
systemEventEntry entry .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1
An entry containing type of system events.
Indexes
eventSystemEventIndex
Column Syntax OID
eventSystemEventIndex mandatory
Index of events.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.1
eventDeviceColdStartEvent mandatory
Select which warning machanism to take place when the device
cold starts.
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.2
eventDeviceWarmStartEvent mandatory
Select which warning machanism to take place when the device
warm starts.
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.3
eventAuthenticationFailureEvent mandatory
Select which warning machanism to take place when
authentication failure.
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.4
eventRingEvent mandatory
Select which warning machanism to take place when ring
event occured.
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.5
eventPower1FailureEvent mandatory
Select which warning machanism to take place when power1
failure.
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.6
eventPower2FailureEvent mandatory
Select which warning machanism to take place when power2
failure.
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.7
eventFaultRelay1Event mandatory
Select which warning machanism to take place when a fault
relay 1 is triggered.
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.8
eventFaultRelay2Event mandatory
Select which warning machanism to take place when a fault
relay 2 is triggered.
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.9
eventTimeSynchronizeEvent mandatory
Select which warning machanism to take place when time
synchronizatonn failed.
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.10
eventSFPEvent mandatory
Select which warning machanism to take place when SFP
event occured.
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.11
eventDI1ChangeEvent mandatory
Select which warning machanism to take place when DI1
changed .
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.12
eventDI2ChangeEvent mandatory
Select which warning machanism to take place when DI2
changed .
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.13
eventLoopDetectionEvent mandatory
Select which warning machanism to take place when loop detection
event occured.
AlertTyper/w
Textual Convention: AlertType Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.1.1.14

portEventTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.10.2.1.2 · 1 row entry · 2 columns
Open in standard view 
Table of descriptive information and controls the reactions 
to port link up, link down, or both link up and down.
          
Three types of reactions will be triggered: (1)logging in the 
switch or send logs to remote syslog servers, (2)sending an 
email, or (3)send an snmp trap. Each type of alert is configured 
in sysLogConfiguration, smtpConfiguration, snmpTrapServerEnable 
and snmpTrapServerTable.
portEventEntry entry .1.3.6.1.4.1.24062.2.2.1.10.2.1.2.1
An entry controlling the type of port events.
Indexes
eventPortNumber
Column Syntax OID
eventPortNumber mandatory
Port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.2.1.1
eventPortEvent mandatory
Select the port event to react to.
Enumerationr/w
Enumerated Values:
1linkup
2linkdown
3linkupandlinkdown
4disabled
 .1.3.6.1.4.1.24062.2.2.1.10.2.1.2.1.2

emailAlertRcptTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.10.2.3.7 · 1 row entry · 2 columns
Open in standard view 
Table configuring recipient email addresses.
emailAlertRcptEntry entry .1.3.6.1.4.1.24062.2.2.1.10.2.3.7.1
An entry containing recipient email address.
Indexes
eventEmailAlertRcptIndex
Column Syntax OID
eventEmailAlertRcptIndex mandatory
Index of recipient Email address.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.10.2.3.7.1.1
eventEmailAlertRcptEmailAddr mandatory
A recipient email address.
OctetStringr/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.24062.2.2.1.10.2.3.7.1.2

macAddrTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.11.1.1 · 1 row entry · 5 columns
Open in standard view 
A table containing information about unicast or multicast 
MAC addresses that currently learned, configured by management 
or IGMP snooping.
macAddrEntry entry .1.3.6.1.4.1.24062.2.2.1.11.1.1.1
An entry containing inforamtion about a MAC address entry.
Indexes
macAddressAddr
Column Syntax OID
macAddressAddr mandatory
MAC address of the entry.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.24062.2.2.1.11.1.1.1.1
macAddressType mandatory
The type of this entry.
dynamicUnicast(1) - unicast address that learned from source
address of ingress frames.
staticUnicast(2) - unicast address that configured by management
and will remain so after the next …
Enumerationr/w
Enumerated Values:
1dynamicUnicast
2staticUnicast
3managementUnicast
4dynamicMulticast
5staticMulticast
6managementMulticast
 .1.3.6.1.4.1.24062.2.2.1.11.1.1.1.2
macAddressPortList mandatory
The port list, which must be valid when creating a new entry.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.24062.2.2.1.11.1.1.1.3
macAddressVlanId mandatory
The VLAN where the mac address learned from or configured to.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.1.1.1.4
macAddressStatus mandatory
This object is used to manage to creation and deletion of
a static entry, and is used to indicate the status of an entry.

To Creating a static entry, select a unused value of
macAddressIndex and set mac…
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.24062.2.2.1.11.1.1.1.5

switchPortStatTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.11.2.1 · 1 row entry · 10 columns
Open in standard view 
Table of descriptive and statistics information about each
switch ports.
switchPortStatEntry entry .1.3.6.1.4.1.24062.2.2.1.11.2.1.1
An entry in the table containing descriptive information
and statistics of a port.
Indexes
swPortStatIndex
Column Syntax OID
swPortStatIndex mandatory
Index of port statistic table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.2.1.1.1
swPortStatType mandatory
Indicates the port type.
Enumeration
Enumerated Values:
1hundredBaseTX
2thousandBaseT
3hundredBaseFX
4thousandBaseSX
5thousandBaseLX
6other
7notPresent
 .1.3.6.1.4.1.24062.2.2.1.11.2.1.1.2
swPortStatLink mandatory
Indicates the link state.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.24062.2.2.1.11.2.1.1.3
swPortStatState mandatory
Indicates the port state.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.24062.2.2.1.11.2.1.1.4
swPortStatRXGoodPkt mandatory
The count of good frames received, which is the total number
of recieved unicast, broadcast, multicast and pause frames.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.2.1.1.5
swPortStatRXBadPkt mandatory
The count of bad frames received, which is the total number of
undersize, fragment, oversize, jabber, RXErr and FCSErr frames.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.2.1.1.6
swPortStatRXAbortPkt mandatory
The count of abort frames when receive, which is the total
number of discarded and filtered frames.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.2.1.1.7
swPortStatTXGoodPkt mandatory
The count of good frames transmitted, which is the total number
of transmitted unicast, broadcast, multicast and pause frames.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.2.1.1.8
swPortStatTXBadPkt mandatory
The count of FCSErr frames when transmit.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.2.1.1.9
swPortStatPacketCollision mandatory
The count of collision.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.2.1.1.10

portMirrorSourceTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.11.3.4 · 1 row entry · 2 columns
Open in standard view 
Table of descriptive information and configuration of port 
mirroring in this system.
Use this table to select monitor port for this switch.
portMirrorSourceEntry entry .1.3.6.1.4.1.24062.2.2.1.11.3.4.1
Information configuring port mirroring on each port.
Indexes
portMirrorPortNum
Column Syntax OID
portMirrorPortNum mandatory
The Port number.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.24062.2.2.1.11.3.4.1.1
portMirrorSourcePort mandatory
The mode of source port (monitor port).
(1) TX only.
(2) RX only.
(3) RX and TX.
(4) Source port is disabled.
The ports you want to monitor. All source port traffic
will be copied to destination port (sniffer port).
Thi…
Enumerationr/w
Enumerated Values:
1txOnly
2rxOnly
3rxAndTx
4disabled
 .1.3.6.1.4.1.24062.2.2.1.11.3.4.1.2

eventLogTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.11.4.2 · 1 row entry · 2 columns
Open in standard view 
Table of descriptive information about logs.
eventLogEntry entry .1.3.6.1.4.1.24062.2.2.1.11.4.2.1
An entry in the table containing a log.
Indexes
eventLogIndex
Column Syntax OID
eventLogIndex mandatory
Index of log.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.4.2.1.1
eventLogDescription mandatory
The description of a log.
OctetString
Constraints:
range: 0-100
 .1.3.6.1.4.1.24062.2.2.1.11.4.2.1.2

lldpNeighborTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.11.5.4 · 1 row entry · 5 columns
Open in standard view 
A table containing LLDP neighbors information
lldpNeighborEntry entry .1.3.6.1.4.1.24062.2.2.1.11.5.4.1
An entry containing inforamtion about a LLDP neighbor entry.
Indexes
lldpNeighborLocalPort
Column Syntax OID
lldpNeighborLocalPort mandatory
Local port of LLDP Neighbor
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.24062.2.2.1.11.5.4.1.1
lldpNeighborMacAddress mandatory
MAC address of LLDP Neighbor
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.24062.2.2.1.11.5.4.1.2
lldpNeighborIpAddress mandatory
IP address of LLDP Neighbor
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.24062.2.2.1.11.5.4.1.3
lldpNeighborVID mandatory
VLAN ID of LLDP Neighbor
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.5.4.1.4
lldpNeighborTTL mandatory
TTL of LLDP Neighbor
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.5.4.1.5

hardwareStatusTable

table mandatory
.1.3.6.1.4.1.24062.2.2.1.11.6.1 · 1 row entry · 8 columns
Open in standard view
hardwareStatusEntry entry .1.3.6.1.4.1.24062.2.2.1.11.6.1.1
Indexes
ledHardwareStatusIndex
Column Syntax OID
ledHardwareStatusIndex mandatory
Index of leds.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.24062.2.2.1.11.6.1.1.1
ledPower1Status mandatory
The status of Power 1 LED
Enumeration
Enumerated Values:
1on
2blinkNormal
3blinkFast
4off
 .1.3.6.1.4.1.24062.2.2.1.11.6.1.1.2
ledPower2Status mandatory
The status of Power 2 LED
Enumeration
Enumerated Values:
1on
2blinkNormal
3blinkFast
4off
 .1.3.6.1.4.1.24062.2.2.1.11.6.1.1.3
ledDI1Status mandatory
The status of DI 1 LED
Enumeration
Enumerated Values:
1on
2blinkNormal
3blinkFast
4off
 .1.3.6.1.4.1.24062.2.2.1.11.6.1.1.4
ledDI2Status mandatory
The status of DI 2 LED
Enumeration
Enumerated Values:
1on
2blinkNormal
3blinkFast
4off
 .1.3.6.1.4.1.24062.2.2.1.11.6.1.1.5
ledDO1Status mandatory
The status of DO 1 LED
Enumeration
Enumerated Values:
1on
2blinkNormal
3blinkFast
4off
 .1.3.6.1.4.1.24062.2.2.1.11.6.1.1.6
ledDO2Status mandatory
The status of DO 2 LED
Enumeration
Enumerated Values:
1on
2blinkNormal
3blinkFast
4off
 .1.3.6.1.4.1.24062.2.2.1.11.6.1.1.7
ledRMStatus mandatory
The status of RM LED
Enumeration
Enumerated Values:
1on
2blinkNormal
3blinkFast
4off
 .1.3.6.1.4.1.24062.2.2.1.11.6.1.1.8