macAddressType
Jetnet5010G ·
.1.3.6.1.4.1.24062.2.2.1.11.1.1.1.2
Object
column
mandatory
r/w
Enumeration
The type of this entry.
dynamicUnicast(1) - unicast address that learned from source
address of ingress frames.
staticUnicast(2) - unicast address that configured by management
and will remain so after the next reset of the device. Upto
10 static unicast entries can be configured for each port.
managementUnicast(3) - unicast address that configured for
management purpose or the MAC address of the device itself.
Management unicast entries are read-only.
dynamicMulticast(4) - dynamic multicast address that configured
by IGMP snooping. These entries are read-only.
staticMulticast(5) - multicast address that configured by
management and will remain so after the next reset of the
device.
-- Upto 10 static multicast entries can be configured.
managementMulticast(6) - multicast address that configured for
management purpose, such as GVRP and so on. These entries
are read-only.
Management entries are read-only. Dynamic entries can be read
and delete. Only static entries are read-create.
Context
- MIB
- Jetnet5010G
- OID
.1.3.6.1.4.1.24062.2.2.1.11.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- macAddrEntry
- Table
- macAddrTable
- Siblings
- 4
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | dynamicUnicast |
2 | staticUnicast |
3 | managementUnicast |
4 | dynamicMulticast |
5 | staticMulticast |
6 | managementMulticast |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| macAddressAddr mandatory MAC address of the entry. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.24062.2.2.1.11.1.1.1.1 |
| macAddressPortList mandatory The port list, which must be valid when creating a new entry. | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.24062.2.2.1.11.1.1.1.3 |
| macAddressVlanId mandatory The VLAN where the mac address learned from or configured to. | column | Integer32 | .1.3.6.1.4.1.24062.2.2.1.11.1.1.1.4 |
| macAddressStatus mandatory This object is used to manage to creation and deletion of
a static entry, and is used to indicate the status of an entry.
To Creating a static entry, select a unus… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.24062.2.2.1.11.1.1.1.5 |