IPOA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
62

ipoaLisTable

table
.1.3.6.1.2.1.10.46.1.2 · 1 row entry · 13 columns
Open in standard view 
There is one entry in this table for every Logical IP
Subnet (LIS) of which this system is a member.
          
The bulk of the objects in an ipoaLisEntry exists
to control ATMARP for a particular LIS.  In a PVC only
environment it is implementation dependent as to
whether this table should be supported.
ipoaLisEntry entry .1.3.6.1.2.1.10.46.1.2.1
Information about a single LIS of which this system
is a member.

Membership in a LIS is independent of the actual ATM
interfaces being used. The ipoaLisTable defines
all LISs that a system is a member of. …
Indexes
ipoaLisSubnetAddr
Column Syntax OID
ipoaLisSubnetAddr
The IP subnet address associated with this LIS.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.46.1.2.1.1
ipoaLisDefaultMtu
The default MTU used within this LIS. Note that the
actual MTU used for a VC between two members of the
LIS may be negotiated during connection setup and may
be different than this value. The ipoaVcNegotiatedMtu
objec…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.2.1.10.46.1.2.1.2
ipoaLisDefaultEncapsType
The default encapsulation to use on VCs created for
this LIS. Note that the actual encapsulation type may
be negotiated during connection setup and may be
different than this value. The
ipoaVcNegotiatedEncapsType obje…
IpoaEncapsTyper/w
Textual Convention: IpoaEncapsType Enumeration
Type Values:
1llcSnap
2vcMuxed
3other
 .1.3.6.1.2.1.10.46.1.2.1.3
ipoaLisInactivityTimer
The time, in seconds, before a call established for an
ipNetToMediaEntry on a client will timeout due to no
traffic being passed on the VC. A value of 0 implies
no time out.
secondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.10.46.1.2.1.4
ipoaLisMinHoldingTime
The minimum amount of time, in seconds, that a call
will remain open. If 0 then ipoaInactivityTimer will
completely determine when a call is terminated.
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.2.1.10.46.1.2.1.5
ipoaLisQDepth
The maximum number of outstanding requests that are
allowed while waiting for ATMARP replies and
InATMARP replies for this LIS.
packetsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.2.1.10.46.1.2.1.6
ipoaLisMaxCalls
The maximum number of SVCs that can be established
simultaneously for this LIS.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.2.1.10.46.1.2.1.7
ipoaLisCacheEntryAge
The time, in seconds, before an ipNetToMediaEntry will
age out of the table. Note that the default value will
be different for a client and a server. An ATMARP
Server should use a default of 1200 and a client should
u…
secondsInteger32r/w
Constraints:
range: 60-1200
 .1.3.6.1.2.1.10.46.1.2.1.8
ipoaLisRetries
The number of times the ATMARP request will be retried
when no response is received in the timeout interval
indicated by ipoaLisTimeout.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.2.1.10.46.1.2.1.9
ipoaLisTimeout
The time to wait, in seconds, before retransmission
of an ARP request.
secondsInteger32r/w
Constraints:
range: 1-60
 .1.3.6.1.2.1.10.46.1.2.1.10
ipoaLisDefaultPeakCellRate
This object is the signalling parameter that
should be used when setting up all best effort
VCCs (Virtual Channel Connections).
This parameter applies to the forward and
backward direction on a per best effort VCC basis…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.10.46.1.2.1.11
ipoaLisActiveVcs
Number of active SVCs for this LIS.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.2.1.12
ipoaLisRowStatus
This object allows entries to be created and deleted
in the ipoaLisTable.

When the ipoaLisRowStatus deleted (by setting this
object to destroy(6)), this has the side-effect of
removing all entries from th…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.46.1.2.1.13

ipoaLisIfMappingTable

table
.1.3.6.1.2.1.10.46.1.3 · 1 row entry · 2 columns
Open in standard view 
There is one entry in this table for every combination
of ipoaLisEntry and IP over ATM interface.
ipoaLisIfMappingEntry entry .1.3.6.1.2.1.10.46.1.3.1
Defines an entry in the ipoaLisIfMappingTable.
Indexes
ipoaLisSubnetAddr ipoaLisIfMappingIfIndex
Column Syntax OID
ipoaLisIfMappingIfIndex
The ipAdEntIfIndex object from an ipAddrEntry
is used as an index to this table when its
ipAdEntAddr is in the subnet implied by
ipoaLisSubnetAddr.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.2.1.10.46.1.3.1.1
ipoaLisIfMappingRowStatus
This object allows entries to be created and deleted
in the ipoaLisIfMappingTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.46.1.3.1.2

ipoaArpClientTable

table
.1.3.6.1.2.1.10.46.1.4 · 1 row entry · 17 columns
Open in standard view 
The ATMARP clients running on this system.
ipoaArpClientEntry entry .1.3.6.1.2.1.10.46.1.4.1
Information about a single ATMARP Client. Clients
can be started and stopped by adding and removing
entries from this table. An entry in the
ipoaArpClientTable has a corresponding entry in the
ipAddrTable. Both are i…
Indexes
IP-MIBipAdEntAddr
Column Syntax OID
ipoaArpClientAtmAddr
The ATM address of the client.
IpoaAtmAddrr/w
Textual Convention: IpoaAtmAddr OctetString
Type Constraints:
range: 0..40
 .1.3.6.1.2.1.10.46.1.4.1.1
ipoaArpClientSrvrInUse
The ATM address of the ATMARP Server,
ipoaArpRemoteSrvrAtmAddr, in use by this client. A
zero length octet string implies that communication
with a Remote ATMARP Server is not in effect.
IpoaAtmAddr
Textual Convention: IpoaAtmAddr OctetString
Type Constraints:
range: 0..40
 .1.3.6.1.2.1.10.46.1.4.1.2
ipoaArpClientInArpInReqs
The number of InATMARP requests received by this
client.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.3
ipoaArpClientInArpOutReqs
The number of InATMARP requests sent by this client.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.4
ipoaArpClientInArpInReplies
The number of InATMARP replies received by this
client.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.5
ipoaArpClientInArpOutReplies
Total number of InATMARP replies sent by this client.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.6
ipoaArpClientInArpInvalidInReqs
The number of times that this client detected an
invalid InATMARP request.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.7
ipoaArpClientInArpInvalidOutReqs
The number of times that this client did not
receive an InATMARP reply.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.8
ipoaArpClientArpInReqs
Total number of ATMARP requests received by this
client.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.9
ipoaArpClientArpOutReqs
Total number of ATMARP requests sent by this client.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.10
ipoaArpClientArpInReplies
Total number of ATMARP replies received by this
client.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.11
ipoaArpClientArpOutReplies
Total number of ATMARP replies sent by this client.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.12
ipoaArpClientArpInNaks
Total number of negative ATMARP replies
received by this client.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.13
ipoaArpClientArpOutNaks
Total number of negative ATMARP replies sent by
this client.

Classic IP and ARP over ATM does not require an
ATMARP client to transmit an ATMARP_NAK upon
receipt of an ATMARP request from another ATMARP
c…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.14
ipoaArpClientArpUnknownOps
The number of times that this client received
an ATMARP message with an operation code for which
it is not coded to support.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.15
ipoaArpClientArpNoSrvrResps
The number of times this client failed to receive
a response from a ATMARP Server within the
ipoaLisTimeout value for ipoaLisRetries times.
This may imply that the client will re-elect a
new primary ATMARP Server for th…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.4.1.16
ipoaArpClientRowStatus
This object allows entries to be created and
deleted from the ipoaArpClientTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.46.1.4.1.17

ipoaArpSrvrTable

table
.1.3.6.1.2.1.10.46.1.5 · 1 row entry · 14 columns
Open in standard view 
The ATMARP Servers running on this system.
ipoaArpSrvrEntry entry .1.3.6.1.2.1.10.46.1.5.1
Information about an ATMARP Server within a LIS. An
entry in this table has two indexes: first ipAdEntAddr,
which is the IP address that this system uses as a
member of the LIS, and then ipoaArpSrvrAddr, which is
the A…
Indexes
IP-MIBipAdEntAddr ipoaArpSrvrAddr
Column Syntax OID
ipoaArpSrvrAddr
The ATM address of the ATMARP Server.
IpoaAtmAddr
Textual Convention: IpoaAtmAddr OctetString
Type Constraints:
range: 0..40
 .1.3.6.1.2.1.10.46.1.5.1.1
ipoaArpSrvrLis
The subnet address that identifies the LIS with
which this server is associated.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.46.1.5.1.2
ipoaArpSrvrInArpInReqs
The number of InATMARP requests received by this
ATMARP Server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.5.1.3
ipoaArpSrvrInArpOutReqs
The number of InATMARP requests sent by this ATMARP
Server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.5.1.4
ipoaArpSrvrInArpInReplies
The number of InATMARP replies received by this
ATMARP Server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.5.1.5
ipoaArpSrvrInArpOutReplies
The number of InATMARP replies sent by this ATMARP
Server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.5.1.6
ipoaArpSrvrInArpInvalidInReqs
The number of invalid InATMARP requests received by
this ATMARP Server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.5.1.7
ipoaArpSrvrInArpInvalidOutReqs
The number of times that this server did not receive
an InATMARP reply.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.5.1.8
ipoaArpSrvrArpInReqs
Total number of ATMARP requests received by this
ATMARP Server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.5.1.9
ipoaArpSrvrArpOutReplies
Total number of ATMARP replies sent by this ATMARP
Server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.5.1.10
ipoaArpSrvrArpOutNaks
Total number of negative ATMARP replies sent by this
ATMARP Server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.5.1.11
ipoaArpSrvrArpDupIpAddrs
The number of times that a duplicate IP address was
detected by this ATMARP Server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.5.1.12
ipoaArpSrvrArpUnknownOps
The number of times that this ATMARP Server received
an ATMARP message with an operation code for which it
is not coded to support.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.46.1.5.1.13
ipoaArpSrvrRowStatus
This object allows entries to be created and deleted
from the ipoaArpSrvrTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.46.1.5.1.14

ipoaArpRemoteSrvrTable

table
.1.3.6.1.2.1.10.46.1.6 · 1 row entry · 6 columns
Open in standard view 
A table of non-local ATMARP Servers associated with a
LIS.  An entry in this table has three indexes: first
the ipoaLisSubnetAddr of the LIS for which the
corresponding ATMARP Server provides ATMARP services,
then the ipoaArpRemoteSrvrAtmAddr, which is the ATM
address of the remote ATMARP Server, and finally the
ifIndex of the interface on which the VC to the ATMARP
Remote Server will be opened.  An ifIndex value of 0
should be used when a single VC is to be shared for
ATMARP purposes by multiple interfaces.
ipoaArpRemoteSrvrEntry entry .1.3.6.1.2.1.10.46.1.6.1
Information about one non-local ATMARP Server.
Indexes
ipoaLisSubnetAddr ipoaArpRemoteSrvrAtmAddr ipoaArpRemoteSrvrIfIndex
Column Syntax OID
ipoaArpRemoteSrvrAtmAddr
The ATM address of the remote ATMARP Server.
IpoaAtmAddr
Textual Convention: IpoaAtmAddr OctetString
Type Constraints:
range: 0..40
 .1.3.6.1.2.1.10.46.1.6.1.1
ipoaArpRemoteSrvrRowStatus
This object allows entries to be created and deleted
from the ipoaArpRemoteSrvrTable.

Deleting an ipoaArpRemoteSrvrEntry (by setting this
object to destroy(6)) may affect ipoaArpClientTable
entries. The …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.46.1.6.1.2
ipoaArpRemoteSrvrIfIndex
The ifIndex of the interface that the VC to the
Remote ATMARP Server is associated with.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.10.46.1.6.1.3
ipoaArpRemoteSrvrIpAddr
The IP Address of the Remote ATMARP Server. A
value of 0.0.0.0 implies that this address isn't
known.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.46.1.6.1.4
ipoaArpRemoteSrvrAdminStatus
The desired state for use of the ATMARP Server
represented by an entry in this table.
ipoaArpRemoteSrvrAdminStatus values:

up(1) - Attempt to activate use of the
ATMARP Server represented by t…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.2.1.10.46.1.6.1.5
ipoaArpRemoteSrvrOperStatus
The current operational state for use of a Remote
ATMARP Server. An up(1) entry has a VC
established to the respective Remote ATMARP
Server:

up(1) - A VC exists to Remote ATMARP Server
whose IP…
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.2.1.10.46.1.6.1.6

ipoaVcTable

table
.1.3.6.1.2.1.10.46.1.7 · 1 row entry · 5 columns
Open in standard view 
A system that supports IP over ATM is an IP system and
therefore MUST support all of the appropriate tables in
the SNMPv2-MIB (RFC 1907), the IF-MIB (RFC 2233),
the IP-MIB (RFC 2011), the TCP-MIB (RFC 2012), and
the UDP-MIB (RFC 2013).  This includes the
ipNetToMediaTable (the ARP cache) that is defined
within the IP-MIB (RFC 2011).  The ipoaVcTable
keeps a set of VCs for each entry in the ARP cache
that was put there by an IP over ATM system acting
as either a host or server.  The ipoaVcTable doesn't
augment the ipNetToMediaTable (ARP Cache) since the
the correspondence between tables is not necessarily
one-to-one.
          
An ipNetToMediaPhysAddress object should contain the
content as defined by the IpoaAtmAddr textual
convention when used to hold an IPOA-MIB ATM Address.
ipoaVcEntry entry .1.3.6.1.2.1.10.46.1.7.1
A VC (permanent or switched) that this host or server
has opened with another member of a LIS. Additional
information can be determined about the VC from the
ATM-MIB.

Entries in this table cannot be create…
Indexes
IP-MIBipNetToMediaIfIndex IP-MIBipNetToMediaNetAddress ipoaVcVpi ipoaVcVci
Column Syntax OID
ipoaVcVpi
The VPI value for the Virtual Circuit.
IpoaVpiInteger
Textual Convention: IpoaVpiInteger Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.10.46.1.7.1.1
ipoaVcVci
The VCI value for the Virtual Circuit.
IpoaVciInteger
Textual Convention: IpoaVciInteger Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.2.1.10.46.1.7.1.2
ipoaVcType
The type of the Virtual Circuit.
IpoaAtmConnKind
Textual Convention: IpoaAtmConnKind Enumeration
Type Values:
1pvc
2svcIncoming
3svcOutgoing
4spvcInitiator
5spvcTarget
 .1.3.6.1.2.1.10.46.1.7.1.3
ipoaVcNegotiatedEncapsType
The encapsulation type used when communicating over
this circuit.
IpoaEncapsType
Textual Convention: IpoaEncapsType Enumeration
Type Values:
1llcSnap
2vcMuxed
3other
 .1.3.6.1.2.1.10.46.1.7.1.4
ipoaVcNegotiatedMtu
The MTU used when communicating over this circuit.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.2.1.10.46.1.7.1.5

ipoaConfigPvcTable

table
.1.3.6.1.2.1.10.46.1.8 · 1 row entry · 5 columns
Open in standard view 
This table MUST be supported when PVCs are intended to
be supported in order to enable the setup of PVCs for
use by IP.
ipoaConfigPvcEntry entry .1.3.6.1.2.1.10.46.1.8.1
Defines a single PVC that exists at this host for
use by IP.
Indexes
ipoaConfigPvcIfIndex ipoaConfigPvcVpi ipoaConfigPvcVci
Column Syntax OID
ipoaConfigPvcIfIndex
The ifIndex of the ATM Interface that this PVC
is associated with.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.2.1.10.46.1.8.1.1
ipoaConfigPvcVpi
The VPI value for the Virtual Circuit.
IpoaVpiInteger
Textual Convention: IpoaVpiInteger Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.10.46.1.8.1.2
ipoaConfigPvcVci
The VCI value for the Virtual Circuit.
IpoaVciInteger
Textual Convention: IpoaVciInteger Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.2.1.10.46.1.8.1.3
ipoaConfigPvcDefaultMtu
Classical IP and ARP over ATM allows use of
other MTU values for PVCs but considers how a
value other than 9180 could be selected to be out
of scope. ipoaConfigPvcDefaultMtu can be used to
configure the MTU to be used …
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.2.1.10.46.1.8.1.4
ipoaConfigPvcRowStatus
This object allows rows to be created and deleted in
the ipoaConfigPvcTable. Creation of an entry in this
table should eventually result in the creation of an
ipNetToMediaEntry and a corresponding ipoaVcEntry
after InA…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.46.1.8.1.5