IBM-LES-BUS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
39

ibmLesBusConfTable

table mandatory
.1.3.6.1.4.1.2.6.118.1.2.1.1.1.1 · 1 row entry · 26 columns
Open in standard view 
This table contains configuration information
for the LESs within the scope of the agent.
ibmLesBusConfEntry entry .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1
Each entry in this table represents a
LES. The parameters in each entry apply
to one emulated LAN served by one LES.
Objects lesLanType and lesMaxFrameSize
are also required besides lesRowStatus
during row creation.
Indexes
lesConfIndex
Column Syntax OID
atmDevNum mandatory
Identifies ATM device to be used by LES/BUS.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.1
useBurnedInEsi mandatory
Specifies whether a MAC Address burned into the ATM
device should be used as the End System Identifier
component of the LES/BUS ATM Address.
SNMPv2-TC-v1TruthValuer/w
Textual Convention: SNMPv2-TC-v1TruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.2
configuredEsi mandatory
Locally Administered End System Identifier that is to be
used as the ESI component of the LES/BUS ATM Address.
If this object is used do not use the ATM Forum elanLecAtmMask.
If both are used the last object set will ta…
NWAYSMSS-MIBAtmPrivateAddrEsi
Textual Convention: NWAYSMSS-MIBAtmPrivateAddrEsi OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.3
configuredSelector mandatory
Specifies value to be used as Selector field component
of LES/BUS ATM Address.
If this object is used do not use the ATM Forum elanLecAtmMask.
If both are used the last object set will take affect.
NWAYSMSS-MIBAtmSelector
Textual Convention: NWAYSMSS-MIBAtmSelector OctetString
Type Constraints:
range: 1
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.4
leArpResponseDest mandatory
When the value is ALL_CLIENTS, LE_ARP_RESPONSE
frames initiated or forwarded by the LES are
sent to all clients on the Point-to-Multipoint
Control Distribute VCC(s). When the value is
ONE_CLIENT, LE_ARP_RESPONSE frames…
Enumerationr/w
Enumerated Values:
0oneClient
1allClients
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.5
use2ControlDistributeVccs mandatory
When TRUE, proxy clients are placed on one
Point-to-Multipoint Control Distribute VCC
and all other clients are placed on another
Point-to-Multipoint Control Distribute VCC.
When FALSE, all clients are placed on a singl…
SNMPv2-TC-v1TruthValuer/w
Textual Convention: SNMPv2-TC-v1TruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.6
use2MulticastForwardVccs mandatory
When TRUE:
- proxy clients are placed on one Point-to-Multipoint
Multicast Forward VCC and all other clients are
placed on another Point-to-Multipoint Multicast
Forward VCC,
- all 'unknown' unicast frames and all …
SNMPv2-TC-v1TruthValuer/w
Textual Convention: SNMPv2-TC-v1TruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.7
validateBestEffortPcr mandatory
When false, Best Effort Control Direct or Multicast Send
VCCs will be accepted without regard to the signalled
forward Peak Cell Rate (PCR). When true, Best Effort
VCCs will be rejected if the signalled forward PCR
exc…
SNMPv2-TC-v1TruthValuer/w
Textual Convention: SNMPv2-TC-v1TruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.8
controlDirectMaxReservedBw mandatory
Defines the maximum acceptable Sustained Cell Rate (SCR)
for a Control Direct VCC; if SCR is not specified on the
incoming call, then this parameter defines the maximum
acceptable Peak Cell Rate (PCR) for a Control Dire…
NWAYSMSS-MIBBandwidthr/w
Textual Convention: NWAYSMSS-MIBBandwidth Integer32
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.9
multicastSendMaxReservedBw mandatory
Defines the maximum acceptable Sustained Cell Rate (SCR)
for a Multicast Send VCC; if SCR is not specified on the
incoming call, then this parameter defines the maximum
acceptable Peak Cell Rate (PCR) for a Multicast Se…
NWAYSMSS-MIBBandwidthr/w
Textual Convention: NWAYSMSS-MIBBandwidth Integer32
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.10
controlDistributeVccType mandatory
Specifies type of traffic characteristics
to be associated with Control Distribute VCC(s).
Bandwidth is not reserved for best effort traffic.
NWAYSMSS-MIBAtmVccTrafficTyper/w
Textual Convention: NWAYSMSS-MIBAtmVccTrafficType Enumeration
Type Values:
1bestEffort
2reservedBandwidth
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.11
controlDistributePcr mandatory
Specifies the Peak Cell Rate (PCR) Traffic Parameter
for the Control Distribute VCC(s). Since the Control
Distribute is a point-to-multipoint VCC, the
specified rate applies to the forward direction only.
NWAYSMSS-MIBBandwidthr/w
Textual Convention: NWAYSMSS-MIBBandwidth Integer32
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.12
controlDistributeScr mandatory
Specifies the Sustained Cell Rate (SCR) Traffic
Parameter for the Control Distribute VCC(s).
Since the Control Distribute is a point-to-multipoint
VCC, the specified rate applies to the forward
direction only. If the S…
NWAYSMSS-MIBBandwidthr/w
Textual Convention: NWAYSMSS-MIBBandwidth Integer32
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.13
multicastForwardVccType mandatory
Specifies type of traffic characteristics
to be associated with Multicast Forward VCC(s).
Bandwidth is not reserved for best effort traffic.
NWAYSMSS-MIBAtmVccTrafficTyper/w
Textual Convention: NWAYSMSS-MIBAtmVccTrafficType Enumeration
Type Values:
1bestEffort
2reservedBandwidth
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.14
multicastForwardPcr mandatory
Specifies the Peak Cell Rate (PCR) Traffic Parameter
for the Multicast Forward VCC(s). Since the Multicast
Multicast Forward is a point-to-multipoint
VCC, the specified rate applies to the forward
direction only.
NWAYSMSS-MIBBandwidthr/w
Textual Convention: NWAYSMSS-MIBBandwidth Integer32
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.15
multicastForwardScr mandatory
Specifies the Sustained Cell Rate (SCR) Traffic
Parameter for the Multicast Forward VCC(s). Since
the Multicast Forward is a point-to-multipoint
VCC, the specified rate applies to the forward
direction only. If the SC…
NWAYSMSS-MIBBandwidthr/w
Textual Convention: NWAYSMSS-MIBBandwidth Integer32
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.16
validateJoinsWithLecs mandatory
Specifies whether clients that attempt to join
the ELAN must be validated by the LECS. The default
value is taken from the corresponding object in the ELAN MIB,
and it overrides the ELAN value.
SNMPv2-TC-v1TruthValuer/w
Textual Convention: SNMPv2-TC-v1TruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.17
redundancyEnabled mandatory
Redundancy support allows clients to be assigned to
a backup LES/BUS in the event that the primary LES/BUS
for the ELAN fails.
SNMPv2-TC-v1TruthValuer/w
Textual Convention: SNMPv2-TC-v1TruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.18
redundancyRole mandatory
Redundancy Protocol Role. Specifies whether this LES/BUS instance
is to serve as the primary or backup LES/BUS for the ELAN. This
object is only valid when redundancyEnabled is true. If this object
is never set and red…
Enumerationr/w
Enumerated Values:
0neverSet
1primaryLesBus
2backupLesBus
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.19
redundancyAtmAddr mandatory
ATM Address of Backup LES/BUS. Specifies the ATM address of the
backup LES/BUS for the ELAN. Currently, only the private
address formats defined by the ATM Forum are supported, there
are three private ATM address forma…
r/w .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.20
bmonEnabled mandatory
Enable BUS Monitor for ELAN. When TRUE, host usage of the
Broadcast and Unknown Server is monitored. Periodic sampling
is performed to provide information on the top N heaviest
users of the BUS. Here, a user is defin…
SNMPv2-TC-v1TruthValuer/w
Textual Convention: SNMPv2-TC-v1TruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.21
numTopMacs mandatory
Number of Top MAC Addresses to Record. Specifies the number
of MACs to be recorded with the highest quantity of sampled
frames sent to the BUS in a sample interval.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.22
sampleDuration mandatory
Number of seconds in each Sample Interval. Specifies the number
of seconds in each BUS Monitor sample interval.
Integer32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.23
interSampleTime mandatory
Minutes between start of one sample and the next sample.
Specifies the number of minutes between the start of
one BUS Monitor sample interval and the start of the
next sample interval.
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.24
sampleRate mandatory
Specifies the rate at which the BUS Monitor samples
frames sent to the BUS during a sample interval.
A value of 1 indicates that every frame sent to the
BUS is sampled. A value of 100 indicates that 1
out of every 100 …
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.25
busMode mandatory
With the Fast Bus Feature the BUS can run now run in one of
three modes:

systemBusMode(1) - Frames from BUS are buffered into system memory.
All intelligent BUS mode are available in th…
Enumerationr/w
Enumerated Values:
1systemBusMode
2adapterBusMode
3vccSpliceBusMode
 .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.26

ibmLesBusStatTable

table mandatory
.1.3.6.1.4.1.2.6.118.1.2.1.1.2.1 · 1 row entry · 3 columns
Open in standard view 
This table contains all counters ???.
ibmLesBusStatEntry entry .1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1
Each entry in this table contains a LES and its counters.
Indexes
lesConfIndex
Column Syntax OID
redundancyVccRefused mandatory
Number of Redundancy VCC call setup requests
rejected by the LES for any reason.
.1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.1
redundancyVccReleased mandatory
Number of times a Redundancy VCC has been
released by LEC/network for any reason.
.1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.2
redundancyVccFailure mandatory
Number of Redundancy VCC requests made by LES that failed.
.1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.3

bmonSampleInfoTable

table mandatory
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.1 · 1 row entry · 6 columns
Open in standard view 
This table contains the BUS Monitor (BMON) information for the
last complete sample processed.  The following information is
maintained for each BUS instance using BMON:
   - Time that the last complete sample interval started.
   - Duration of the sample interval.
   - Number of top hosts actually recorded in the sample.
   - Number of frames received during the sample interval.
   - Number of frames sampled in the sample interval.
   - Frame sampling rate (i.e., 1 out of N frames sampled).
Each BUS instance may have a BMON.  This table is indexed by
lesConfIndex.
bmonSampleInfoEntry entry .1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1
Each entry in this table contains BMON information for the
last complete sample processed for a specific BUS instance.
Indexes
lesConfIndex
Column Syntax OID
bmonSampleStartTime mandatory
Timestamp for the start of the last complete BUS Monitor
sample interval.
SNMPv2-TC-v1TimeStamp
Textual Convention: SNMPv2-TC-v1TimeStamp Unsigned32
 .1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.1
bmonSampleDuration mandatory
Duration of the last complete sample interval.
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.2
bmonNumTopMacs mandatory
The number of top hosts actually recorded during the
last complete sample interval.
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.3
bmonReceivedFrames mandatory
The total number of frames received during the last
complete sample interval.
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.4
bmonSampledFrames mandatory
The number of frames actually sampled during the last
complete sample interval.
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.5
bmonSamplingRate mandatory
The frame sampling rate given as N where the rate
is 1 out of every N frames will be sampled.
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.6

bmonStatTable

table mandatory
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.2 · 1 row entry · 4 columns
Open in standard view 
This table contains the BUS Monitor (BMON) counters for the top N
heaviest users of a BUS (i.e., the N MAC addresses that originate
the most data frames.  Each BUS instance may have a BMON.  This
table augments the bmonConfTable.
bmonStatEntry entry .1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1
Each entry in this table contains BMON statistics for the top
users of the indicated BUS instance.
Indexes
lesConfIndex bmonTopNRank
Column Syntax OID
bmonTopNRank mandatory
Rank for the indicated host (i.e., MAC address) given
as N where 1 is the host originating the most frames.
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.1
bmonTopNSrcMacAddr mandatory
Source MAC Address for this host.
SNMPv2-TC-v1MacAddress
Textual Convention: SNMPv2-TC-v1MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.2
bmonTopNLecAtmAddr mandatory
Associated LEC ATM Address for this host.
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.3
bmonTopNFramesSampled mandatory
Number of frames sampled from this host during last
complete sample interval.
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.4