IBM-ELAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
11

ibmElanLesTable

table mandatory
.1.3.6.1.4.1.2.6.118.1.2.1.4.2.2 · 1 row entry · 2 columns
Open in standard view 
This table contains configuration information
for the all LESs for each ELAN specified in the
elanConfTable. This table is used by the LECS
to know if a backup LES is configured.
ibmElanLesEntry entry .1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1
Each entry represents a LES/Emulated LAN pair this
agent maintains.
Indexes
elanConfIndex elanLesIndex
Column Syntax OID
ibmBackupLesAtmAddrValid mandatory
When True specifies the backup LES is specified by ibmBackupLesAtmAddr.
When False specifies no backup LES is configured.
SNMPv2-TC-v1TruthValuer/w
Textual Convention: SNMPv2-TC-v1TruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1.1
ibmBackupLesAtmAddr mandatory
The ATM address of the backup LES.
r/w .1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1.2

ibmLecsConfTable

table mandatory
.1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1 · 1 row entry · 9 columns
Open in standard view 
This table contains configuration information the LECSs
within the scope of the agent.
ibmLecsConfEntry entry .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1
Each entry represents a LECS this
agent maintains.
Objects lecsUseBurnedInEsi, lecsConfiguredEsi,
and lecsConfiguredSelector cannot be modified
unless the lecsAdminStatus is set to
down(2). And the change doesn't take
…
Indexes
lecsConfIndex
Column Syntax OID
lecsUseBurnedInEsi mandatory
Specifies whether a MAC Address burned into the ATM
device should be used as the End System Identifier
component of the LECS ATM Address.
SNMPv2-TC-v1TruthValuer/w
Textual Convention: SNMPv2-TC-v1TruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.1
lecsConfiguredEsi mandatory
Locally Administered End System Identifier that is to be
used as the ESI component of the LECS's ATM Address.
NWAYSMSS-MIBAtmPrivateAddrEsir/w
Textual Convention: NWAYSMSS-MIBAtmPrivateAddrEsi OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.2
lecsConfiguredSelector mandatory
Specifies value to be used as Selector field component
of LECS's ATM address.
NWAYSMSS-MIBAtmSelectorr/w
Textual Convention: NWAYSMSS-MIBAtmSelector OctetString
Type Constraints:
range: 1
 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.3
lecsValidateBestEffortPcr mandatory
When false, Best Effort Configuration Direct VCCs will
be accepted without regard to the signalled forward
Peak Cell Rate (PCR). When true, Best Effort VCCs
will be rejected if the signalled forward PCR exceeds
the lin…
SNMPv2-TC-v1TruthValuer/w
Textual Convention: SNMPv2-TC-v1TruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.4
configDirectMaxReservedBw mandatory
Defines the maximum acceptable Sustained Cell Rate (SCR)
for a Configuration Direct VCC; if SCR is not specified
on the incoming call, then this parameter defines the
maximum acceptable Peak Cell Rate (PCR) for a Config…
Integer32r/w
Constraints:
range: 0-155000
 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.5
atmDevLineSpeed mandatory
Line Speed of LECS ATM Device.
This should not exposed to the user.
.1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.6
idleVccTime mandatory
When the maximum number of VCCs is exceeded at
the LECS, VCCs are released (see lecsMaxVccs).
All active VCCs at the LECS are scanned.
If a VCC has been inactive for this length of time,
then it is released.
Integer32r/w
Constraints:
range: 3-43200
 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.7
lecsMaxVccs mandatory
This is the maximum number of simultaneous VCCs
supported by the LECS. If this number is exceeded,
then VCCs will be released (see idleVccTime).
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.8
lecsDomainName mandatory
This is the name to associate with the Domain of the LECS
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.9