Hirschmann-LION-24TP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

428

switchInfoTable

table

.1.3.6.1.4.1.248.13.7.4.1.1.3 · 1 row entry · 16 columns

Open in standard view

Table of descriptive and status information about
the switch units in this system.

switchInfoEntry entry .1.3.6.1.4.1.248.13.7.4.1.1.3.1

Table providing descriptions and status information for
switch units.

Indexes

swUnitIndex

Column Syntax OID

swUnitIndex

This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.1

swHardwareVer

Hardware version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.2

swMicrocodeVer

Microcode version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.3

swLoaderVer

Loader version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.4

swBootRomVer

Boot ROM code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.5

swOpCodeVer

Operation code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.6

swPortNumber

The number of ports on this switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.7

swPowerStatus

Indicates the switch using internalPower(1),
redundantPower(2) or both(3)

Enumeration

Enumerated Values:

1	internalPower
2	redundantPower
3	internalAndRedundantPower

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.8

swRoleInSystem

Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system.

Enumeration

Enumerated Values:

1	master
2	backupMaster
3	slave

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.9

swSerialNumber

Serial number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.10

swExpansionSlot1

Type of expansion module in this switch slot 1.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp
13	tenHundredBaseT4port
14	tenHundredBaseFxMtrj4port
15	comboStackingSfp
16	tenHundredBaseT
17	comboThousandBaseTxSfp
18	eightPortSfpModule
19	tenGigaPortModule

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.11

swExpansionSlot2

Type of expansion module in this switch slot 2.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp
13	tenHundredBaseT4port
14	tenHundredBaseFxMtrj4port
15	comboStackingSfp
16	tenHundredBaseT
17	comboThousandBaseTxSfp
18	eightPortSfpModule
19	tenGigaPortModule

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.12

swServiceTag

Service tag serial-number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.13

swModelNumber

Model number of the switch.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.14

swEpldVer

The EPLD version of the switch.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.15

swExpectedModuleOpCodeVer

The module opcode version reside in the switch, note that
this variable represent the desired version of the
module which might plug in. For version validation, only
the swExpectedModuleOpCodeVer of the master
is used. …

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.248.13.7.4.1.1.3.1.16

switchIndivPowerTable

table

.1.3.6.1.4.1.248.13.7.4.1.1.6 · 1 row entry · 3 columns

Open in standard view

Table about the status of individual powers.

switchIndivPowerEntry entry .1.3.6.1.4.1.248.13.7.4.1.1.6.1

Table about the status of individual power.

Indexes

swIndivPowerUnitIndex swIndivPowerIndex

Column Syntax OID

swIndivPowerUnitIndex

This is defined as swUnitIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.6.1.1

swIndivPowerIndex

1 means internal power, 2 means external power.

Enumeration

Enumerated Values:

1	internalPower
2	externalPower

.1.3.6.1.4.1.248.13.7.4.1.1.6.1.2

swIndivPowerStatus

notPresent(1) means not present, green(2) means
up, red(3) means down.

Enumeration

Enumerated Values:

1	notPresent
2	green
3	red

.1.3.6.1.4.1.248.13.7.4.1.1.6.1.3

switchFanTable

table

.1.3.6.1.4.1.248.13.7.4.1.1.9 · 1 row entry · 6 columns

Open in standard view

The fan status table.

switchFanEntry entry .1.3.6.1.4.1.248.13.7.4.1.1.9.1

A conceptual row of the switchFanTable.

Indexes

switchUnitIndex switchFanIndex

Column Syntax OID

switchUnitIndex

The unit of the switch for the stackable device.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.9.1.1

switchFanIndex

The unit number of the fan.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.9.1.2

switchFanStatus

Indicating the status of the fan, 1:ok; 2:failure.

Enumeration

Enumerated Values:

1	ok
2	failure

.1.3.6.1.4.1.248.13.7.4.1.1.9.1.3

switchFanAdminSpeed

The speed of the fan, measured in rpm (rotations per
minute). Set this object to 0 to enter auto mode,
set to other values to enter manual mode.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.9.1.4

switchFanFailureCount

The total failure count of the fan since the switch
has reboot.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.9.1.5

switchFanOperSpeed

The operational value of the fan speed, measured in rpm (rotations per
minute).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.9.1.6

switchThermalTempTable

table

.1.3.6.1.4.1.248.13.7.4.1.1.11 · 1 row entry · 3 columns

Open in standard view

The table which collects temperature infomration of the
switch.

switchThermalTempEntry entry .1.3.6.1.4.1.248.13.7.4.1.1.11.1

A conceptual row of the switchThermalTempTable.

Indexes

switchThermalTempUnitIndex switchThermalTempThermalIndex

Column	Syntax	OID
switchThermalTempUnitIndex The unit of the switch for stackable device.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.13.7.4.1.1.11.1.1`
switchThermalTempThermalIndex The thermal index of the switch.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.13.7.4.1.1.11.1.2`
switchThermalTempValue The temperature value in the device in grade Celsius.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.13.7.4.1.1.11.1.3`

switchThermalActionTable

table

.1.3.6.1.4.1.248.13.7.4.1.1.12 · 1 row entry · 7 columns

Open in standard view

The table for configuring the thermal action.

switchThermalActionEntry entry .1.3.6.1.4.1.248.13.7.4.1.1.12.1

A conceptual row of the switchThermalActionTable.

Indexes

switchThermalActionUnitIndex switchThermalActionThermalIndex switchThermalActionIndex

Column Syntax OID

switchThermalActionUnitIndex

The unit of the switch for stackable device.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.12.1.1

switchThermalActionThermalIndex

The thermal index of the switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.12.1.2

switchThermalActionIndex

The action index of the switchTheramlActionTable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.12.1.3

switchThermalActionRisingThreshold

The rising threshold of the switch temperature.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.12.1.4

switchThermalActionFallingThreshold

The falling threshold of the switch temperature.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.12.1.5

switchThermalActionAction

The action that will be taken when the
temperature exceeds the rising threshold
or falls below the falling threshold.

Bitsr/w

Enumerated Values:

trap

.1.3.6.1.4.1.248.13.7.4.1.1.12.1.6

switchThermalActionStatus

Set valid(1) to create an entry, Set Invalid(2) to delete an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.1.12.1.7

switchModuleInfoTable

table

.1.3.6.1.4.1.248.13.7.4.1.1.13 · 1 row entry · 13 columns

Open in standard view

Table of descriptive and status information about
the switch modules in this system.

switchModuleInfoEntry entry .1.3.6.1.4.1.248.13.7.4.1.1.13.1

Table providing descriptions and status information for
switch modules.

Indexes

swModuleUnitIndex swModuleModuleIndex

Column Syntax OID

swModuleUnitIndex

This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.1

swModuleModuleIndex

This object identifies the module within the switch
for which this entry contains information.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.2

swModuleHardwareVer

Hardware version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.3

swModuleMicrocodeVer

Microcode version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.4

swModuleLoaderVer

Loader version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.5

swModuleBootRomVer

Boot ROM code version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.6

swModuleOpCodeVer

Operation code version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.7

swModulePortNumber

The number of ports of this module.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.8

swModuleSerialNumber

Serial number of the module.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.9

swModuleType

Type of module.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp
13	tenHundredBaseT4port
14	tenHundredBaseFxMtrj4port
15	comboStackingSfp
16	tenHundredBaseT
17	comboThousandBaseTxSfp
18	eightPortSfpModule
19	tenGigaPortModule

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.10

swModuleModelNumber

Model number of the module.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.11

swModuleEpldVer

The EPLD version of the module.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.12

swModuleDescr

A textual description of the entity to describe the
module.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.248.13.7.4.1.1.13.1.13

portTable

table

.1.3.6.1.4.1.248.13.7.4.1.2.1 · 1 row entry · 11 columns

Open in standard view

Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk.

portEntry entry .1.3.6.1.4.1.248.13.7.4.1.2.1.1

An entry in the table, describing the configuration of
one switch port or trunk.

Indexes

portIndex

Column Syntax OID

portIndex

The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.2.1.1.1

portName

The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later).

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.248.13.7.4.1.2.1.1.2

portType

Indicates the port type of the configuration of the switch.

Enumeration

Enumerated Values:

1	other
2	hundredBaseTX
3	hundredBaseFX
4	thousandBaseSX
5	thousandBaseLX
6	thousandBaseT
7	thousandBaseGBIC
8	thousandBaseSfp
9	hundredBaseFxScSingleMode
10	hundredBaseFxScMultiMode
11	thousandBaseCX
12	tenG

.1.3.6.1.4.1.248.13.7.4.1.2.1.1.3

portSpeedDpxCfg

Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half…

Enumerationr/w

Enumerated Values:

1	reserved
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000
8	halfDuplex10g
9	fullDuplex10g

.1.3.6.1.4.1.248.13.7.4.1.2.1.1.4

portFlowCtrlCfg

(1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
5	tx
6	rx

.1.3.6.1.4.1.248.13.7.4.1.2.1.1.5

portCapabilities

Port or trunk capabilities.

Bitsr/w

Enumerated Values:

0	portCap10half
1	portCap10full
2	portCap100half
3	portCap100full
4	portCap1000half
5	portCap1000full
6	portCap10gHalf
7	portCap10gFull
8	reserved8
9	reserved9
10	reserved10
11	reserved11
12	reserved12
13	reserved13
14	portCapSym
15	portCapFlowCtrl

.1.3.6.1.4.1.248.13.7.4.1.2.1.1.6

portAutonegotiation

Whether auto-negotiation is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.2.1.1.7

portSpeedDpxStatus

The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case t…

Enumeration

Enumerated Values:

1	error
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000
8	halfDuplex10g
9	fullDuplex10g

.1.3.6.1.4.1.248.13.7.4.1.2.1.1.8

portFlowCtrlStatus

(2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently confi…

Enumeration

Enumerated Values:

1	error
2	backPressure
3	dot3xFlowControl
4	none

.1.3.6.1.4.1.248.13.7.4.1.2.1.1.9

portTrunkIndex

The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trunkIndex, defined by the
corresponding tru…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.2.1.1.10

portComboForcedMode

This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal…

Enumerationr/w

Enumerated Values:

1	none
2	copperForced
3	copperPreferredAuto
4	sfpForced
5	sfpPreferredAuto

.1.3.6.1.4.1.248.13.7.4.1.2.1.1.12

trunkTable

table

.1.3.6.1.4.1.248.13.7.4.1.3.3 · 1 row entry · 4 columns

Open in standard view

Table describing the configuration and status of each
trunk.

trunkEntry entry .1.3.6.1.4.1.248.13.7.4.1.3.3.1

An entry describing the configuration and status of a
particular trunk.

Indexes

trunkIndex

Column Syntax OID

trunkIndex

Identifies the trunk within the switch that is
described by the table entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.3.3.1.1

trunkPorts

The complete set of ports currently associated with
this trunk.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.248.13.7.4.1.3.3.1.2

trunkCreation

A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk.

Enumeration

Enumerated Values:

1	static
2	lacp

.1.3.6.1.4.1.248.13.7.4.1.3.3.1.3

trunkStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.3.3.1.4

lacpPortTable

table

.1.3.6.1.4.1.248.13.7.4.1.4.1 · 1 row entry · 2 columns

Open in standard view

Table for LACP port configuration.

lacpPortEntry entry .1.3.6.1.4.1.248.13.7.4.1.4.1.1

Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.

Indexes

lacpPortIndex

Column Syntax OID

lacpPortIndex

The port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.4.1.1.1

lacpPortStatus

Whether 802.3ad LACP is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.4.1.1.2

staPortTable

table

.1.3.6.1.4.1.248.13.7.4.1.5.2 · 1 row entry · 9 columns

Open in standard view

The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType.

staPortEntry entry .1.3.6.1.4.1.248.13.7.4.1.5.2.1

The conceptual entry of staPortTable.

Indexes

No indexes recorded

Column Syntax OID

staPortFastForward

Whether fast forwarding is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.5.2.1.2

staPortProtocolMigration

When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.248.13.7.4.1.5.2.1.3

staPortAdminEdgePort

The administrative value of the edge port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port and a value of false(2) indicates
that this port should be assumed as a non-edge-port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.248.13.7.4.1.5.2.1.4

staPortOperEdgePort

The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.248.13.7.4.1.5.2.1.5

staPortAdminPointToPoint

The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of f…

Enumerationr/w

Enumerated Values:

0	forceTrue
1	forceFalse
2	auto

.1.3.6.1.4.1.248.13.7.4.1.5.2.1.6

staPortOperPointToPoint

The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-de…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.248.13.7.4.1.5.2.1.7

staPortSystemStatus

Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.5.2.1.9

staPortLongAdminPathCost

The admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This obje…

Integer32r/w

Constraints:
range: 1-200000000

.1.3.6.1.4.1.248.13.7.4.1.5.2.1.10

staPortLongOperPathCost

The oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This objec…

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.248.13.7.4.1.5.2.1.11

xstInstanceCfgTable

table

.1.3.6.1.4.1.248.13.7.4.1.5.6.4 · 1 row entry · 16 columns

Open in standard view

This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0.

xstInstanceCfgEntry entry .1.3.6.1.4.1.248.13.7.4.1.5.6.4.1

A conceptual row containing the property of the RST or MST instance.

Indexes

xstInstanceCfgIndex

Column Syntax OID

xstInstanceCfgIndex

An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance.

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.1

xstInstanceCfgPriority

The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096.

Integer32r/w

Constraints:
range: 0-61440

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.2

xstInstanceCfgTimeSinceTopologyChange

The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.3

xstInstanceCfgTopChanges

The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.4

xstInstanceCfgDesignatedRoot

The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root identi…

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.5

xstInstanceCfgRootCost

The cost of the path to the root as seen from
this bridge of the RST or MST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.6

xstInstanceCfgRootPort

The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.7

xstInstanceCfgMaxAge

The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,

in units of hundredths of a se…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.8

xstInstanceCfgHelloTime

The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.9

xstInstanceCfgHoldTime

This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.10

xstInstanceCfgForwardDelay

For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the por…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.11

xstInstanceCfgBridgeMaxAge

For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the va…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.12

xstInstanceCfgBridgeHelloTime

For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.13

xstInstanceCfgBridgeForwardDelay

For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.14

xstInstanceCfgTxHoldCount

For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.15

xstInstanceCfgPathCostMethod

For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.

When the value o…

StaPathCostMode

Textual Convention: StaPathCostMode Enumeration

Type Values:

1	short
2	long

.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.16

xstInstancePortTable

table

.1.3.6.1.4.1.248.13.7.4.1.5.6.5 · 1 row entry · 11 columns

Open in standard view

The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration.

xstInstancePortEntry entry .1.3.6.1.4.1.248.13.7.4.1.5.6.5.1

The conceptual row for xstInstancePortTable.

Indexes

xstInstanceCfgIndex BRIDGE-MIBdot1dStpPort

Column Syntax OID

xstInstancePortPriority

Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active lin…

Integer32r/w

Constraints:
range: 0-240

.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.3

xstInstancePortState

The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
…

Enumeration

Enumerated Values:

1	discarding
2	learning
3	forwarding

.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.4

xstInstancePortEnable

The enabled/disabled status of the port.

P-BRIDGE-MIBEnabledStatus

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.5

xstInstancePortDesignatedRoot

The unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.7

xstInstancePortDesignatedCost

The path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.8

xstInstancePortDesignatedBridge

The bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.9

xstInstancePortDesignatedPort

The port identifier of the port on the designated
bridge for this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.10

xstInstancePortForwardTransitions

The number of times this port has transitioned
from the learning state to the forwarding state.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.11

xstInstancePortPortRole

The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port …

Enumeration

Enumerated Values:

1	disabled
2	root
3	designated
4	alternate
5	backup
6	master

.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.12

xstInstancePortAdminPathCost

The admin value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attach…

Integer32r/w

Constraints:
range: 1-200000000

.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.13

xstInstancePortOperPathCost

The oper value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attache…

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.14

mstInstanceEditTable

table

.1.3.6.1.4.1.248.13.7.4.1.5.6.6 · 1 row entry · 6 columns

Open in standard view

The instance table for the Multiple Spanning Tree region

mstInstanceEditEntry entry .1.3.6.1.4.1.248.13.7.4.1.5.6.6.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstInstanceEditIndex

Column	Syntax	OID
mstInstanceEditIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.1`
mstInstanceEditVlansMap A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.2`
mstInstanceEditVlansMap2k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.3`
mstInstanceEditVlansMap3k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.4`
mstInstanceEditVlansMap4k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.5`
mstInstanceEditRemainingHops The remaining hop count for this MST instance.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.6`

mstInstanceOperTable

table

.1.3.6.1.4.1.248.13.7.4.1.5.6.7 · 1 row entry · 5 columns

Open in standard view

The Multiple Spanning Tree region instance vlan mapped table.

mstInstanceOperEntry entry .1.3.6.1.4.1.248.13.7.4.1.5.6.7.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstInstanceOperIndex

Column	Syntax	OID
mstInstanceOperIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.248.13.7.4.1.5.6.7.1.1`
mstInstanceOperVlansMap A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.248.13.7.4.1.5.6.7.1.2`
mstInstanceOperVlansMap2k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.248.13.7.4.1.5.6.7.1.3`
mstInstanceOperVlansMap3k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.248.13.7.4.1.5.6.7.1.4`
mstInstanceOperVlansMap4k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.248.13.7.4.1.5.6.7.1.5`

mirrorTable

table

.1.3.6.1.4.1.248.13.7.4.1.8.1 · 1 row entry · 4 columns

Open in standard view

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

mirrorEntry entry .1.3.6.1.4.1.248.13.7.4.1.8.1.1

The conceptual row of mirrorTable.

Indexes

mirrorDestinationPort mirrorSourcePort

Column Syntax OID

mirrorDestinationPort

The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.8.1.1.1

mirrorSourcePort

The source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.8.1.1.2

mirrorType

If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored.

Enumerationr/w

Enumerated Values:

1	rx
2	tx
3	both

.1.3.6.1.4.1.248.13.7.4.1.8.1.1.3

mirrorStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.8.1.1.4

igmpSnoopRouterCurrentTable

table

.1.3.6.1.4.1.248.13.7.4.1.9.8 · 1 row entry · 3 columns

Open in standard view

Table for current router ports.

igmpSnoopRouterCurrentEntry entry .1.3.6.1.4.1.248.13.7.4.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.248.13.7.4.1.9.8.1.1`
igmpSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.248.13.7.4.1.9.8.1.2`
igmpSnoopRouterCurrentStatus The set of ports which are static router ports.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.248.13.7.4.1.9.8.1.3`

igmpSnoopRouterStaticTable

table

.1.3.6.1.4.1.248.13.7.4.1.9.9 · 1 row entry · 3 columns

Open in standard view

Table for static router ports.

igmpSnoopRouterStaticEntry entry .1.3.6.1.4.1.248.13.7.4.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column Syntax OID

igmpSnoopRouterStaticVlanIndex

The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRou…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.9.9.1.1

igmpSnoopRouterStaticPorts

The set of ports which are static router ports.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.248.13.7.4.1.9.9.1.2

igmpSnoopRouterStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.9.9.1.3

igmpSnoopMulticastCurrentTable

table

.1.3.6.1.4.1.248.13.7.4.1.9.10 · 1 row entry · 4 columns

Open in standard view

Table for current multicast addresses.

igmpSnoopMulticastCurrentEntry entry .1.3.6.1.4.1.248.13.7.4.1.9.10.1

Entry for current multicast addresses.

Indexes

igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress

Column	Syntax	OID
igmpSnoopMulticastCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.248.13.7.4.1.9.10.1.1`
igmpSnoopMulticastCurrentIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.248.13.7.4.1.9.10.1.2`
igmpSnoopMulticastCurrentPorts The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.248.13.7.4.1.9.10.1.3`
igmpSnoopMulticastCurrentStatus The set of ports which are static members.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.248.13.7.4.1.9.10.1.4`

igmpSnoopMulticastStaticTable

table

.1.3.6.1.4.1.248.13.7.4.1.9.11 · 1 row entry · 4 columns

Open in standard view

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry entry .1.3.6.1.4.1.248.13.7.4.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column Syntax OID

igmpSnoopMulticastStaticVlanIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.9.11.1.1

igmpSnoopMulticastStaticIpAddress

IP address of multicast group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.9.11.1.2

igmpSnoopMulticastStaticPorts

The set of ports which are members.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.248.13.7.4.1.9.11.1.3

igmpSnoopMulticastStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.9.11.1.4

iPAddrTable

table

.1.3.6.1.4.1.248.13.7.4.1.10.16 · 1 row entry · 6 columns

Open in standard view

A table of iPAddrEntry.

iPAddrEntry entry .1.3.6.1.4.1.248.13.7.4.1.10.16.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

iPAddrIPAddress iPAddrSubnetMask

Column Syntax OID

iPAddrIPAddress

The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the IPAddrIPAddress
or IPAddrSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what …

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.10.16.1.1

iPAddrSubnetMask

The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the IPAddrIPAddress
or IPAddrSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out wha…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.10.16.1.2

iPAddrIfIndex

The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.10.16.1.3

iPAddrPrimaryInterface

Whether this is a primary interface.

Enumerationr/w

Enumerated Values:

1	primary
2	secondary

.1.3.6.1.4.1.248.13.7.4.1.10.16.1.4

iPAddrUnnumbered

Whether this is an unnumbered interface.

Enumeration

Enumerated Values:

1	unnumbered
2	notUnnumbered

.1.3.6.1.4.1.248.13.7.4.1.10.16.1.5

iPAddrStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.10.16.1.6

bcastStormTable

table

.1.3.6.1.4.1.248.13.7.4.1.11.1 · 1 row entry · 3 columns

Open in standard view

Table to manage the control of broadcast storms for ports.

bcastStormEntry entry .1.3.6.1.4.1.248.13.7.4.1.11.1.1

The conceptual row of bcastStormTable.

Indexes

bcastStormIfIndex

Column Syntax OID

bcastStormIfIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.11.1.1.1

bcastStormStatus

Whether broadcast storm protection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.11.1.1.2

bcastStormPktRate

Broadcast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. For a 10 Gbps port, the range
is 1042 to 262143.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.11.1.1.4

vlanTable

table

.1.3.6.1.4.1.248.13.7.4.1.12.1 · 1 row entry · 2 columns

Open in standard view

Table for VLAN configuration.

vlanEntry entry .1.3.6.1.4.1.248.13.7.4.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column Syntax OID

vlanIndex

Based on dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.12.1.1.1

vlanAddressMethod

Method to get the IP address.

Enumerationr/w

Enumerated Values:

1	user
2	bootp
3	dhcp

.1.3.6.1.4.1.248.13.7.4.1.12.1.1.2

vlanPortTable

table

.1.3.6.1.4.1.248.13.7.4.1.12.2 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in VLAN.

vlanPortEntry entry .1.3.6.1.4.1.248.13.7.4.1.12.2.1

Entry for port configuration in VLAN.

Indexes

vlanPortIndex

Column Syntax OID

vlanPortIndex

The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of dot1qPvid in the Q-BRIDG…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.12.2.1.1

vlanPortMode

This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to access(3) sets an access link.

Enumerationr/w

Enumerated Values:

1	hybrid
2	dot1qTrunk
3	access

.1.3.6.1.4.1.248.13.7.4.1.12.2.1.2

prioIpPrecTable

table

.1.3.6.1.4.1.248.13.7.4.1.13.2 · 1 row entry · 3 columns

Open in standard view

Table for IP precedence priority mapping.

prioIpPrecEntry entry .1.3.6.1.4.1.248.13.7.4.1.13.2.1

Entry for IP precedence priority mapping.

Indexes

prioIpPrecPort prioIpPrecValue

Column	Syntax	OID
prioIpPrecPort The port or the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.13.7.4.1.13.2.1.2`
prioIpPrecValue Value of IP ToS Precedence as specified in the packet header.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.248.13.7.4.1.13.2.1.3`
prioIpPrecCos Class of Service (CoS) as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The IP ToS precedence value in the same table row will be mapped to this CoS. This CoS is then further mapped to the hardware queue acc…	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.248.13.7.4.1.13.2.1.4`

prioIpDscpTable

table

.1.3.6.1.4.1.248.13.7.4.1.13.4 · 1 row entry · 3 columns

Open in standard view

Table for IP DSCP priority mapping.

prioIpDscpEntry entry .1.3.6.1.4.1.248.13.7.4.1.13.4.1

Entry for IP DSCP priority mapping.

Indexes

prioIpDscpPort prioIpDscpValue

Column	Syntax	OID
prioIpDscpPort The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.13.7.4.1.13.4.1.1`
prioIpDscpValue Value of IP DSCP as specified in the packet header.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.248.13.7.4.1.13.4.1.2`
prioIpDscpCos Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (CoS). This CoS is then further mapped to the hardwar…	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.248.13.7.4.1.13.4.1.3`

prioIpPortTable

table

.1.3.6.1.4.1.248.13.7.4.1.13.7 · 1 row entry · 4 columns

Open in standard view

Table for IP port priority mapping.

prioIpPortEntry entry .1.3.6.1.4.1.248.13.7.4.1.13.7.1

Entry for IP port priority mapping.

Indexes

prioIpPortPhysPort prioIpPortValue

Column Syntax OID

prioIpPortPhysPort

The port or the trunk (excluding trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.13.7.1.1

prioIpPortValue

IP port for this value.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.248.13.7.4.1.13.7.1.2

prioIpPortCos

Class of service for this entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.248.13.7.4.1.13.7.1.3

prioIpPortStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.13.7.1.4

prioWrrPortTable

table

.1.3.6.1.4.1.248.13.7.4.1.13.12 · 1 row entry · 3 columns

Open in standard view

Table for per port weighted round robin (WRR).

prioWrrPortEntry entry .1.3.6.1.4.1.248.13.7.4.1.13.12.1

Entry for per port weighted round robin (WRR).

Indexes

prioWrrPortIfIndex prioWrrPortTrafficClass

Column	Syntax	OID
prioWrrPortIfIndex The port interface of the prioWrrPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.13.7.4.1.13.12.1.1`
prioWrrPortTrafficClass Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.248.13.7.4.1.13.12.1.2`
prioWrrPortWeight Weight for this entry.	Integer32r/w Constraints: `range: 1-255`	`.1.3.6.1.4.1.248.13.7.4.1.13.12.1.3`

trapDestTable

table

.1.3.6.1.4.1.248.13.7.4.1.14.1 · 1 row entry · 5 columns

Open in standard view

A list of trap destination entries.

trapDestEntry entry .1.3.6.1.4.1.248.13.7.4.1.14.1.1

A destination entry describes the destination IP address,
the community string, and SNMP version to use when sending
a trap.

Indexes

trapDestAddress

Column Syntax OID

trapDestAddress

The address to send traps.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.14.1.1.1

trapDestCommunity

A community to which this destination address belongs.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.248.13.7.4.1.14.1.1.2

trapDestStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.14.1.1.3

trapDestVersion

Determines the version of the trap that is to be sent to the
trap receiver. If the value is 1, then an SNMP version 1 trap
is sent and if the value is 2, an SNMP version 2 trap is
sent.

Enumerationr/w

Enumerated Values:

1	version1
2	version2

.1.3.6.1.4.1.248.13.7.4.1.14.1.1.4

trapDestUdpPort

Determines the UDP port number that the trap will be sent to.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.248.13.7.4.1.14.1.1.5

rateLimitPortTable

table

.1.3.6.1.4.1.248.13.7.4.1.16.1.2 · 1 row entry · 5 columns

Open in standard view

Table for rate limit of each port.

rateLimitPortEntry entry .1.3.6.1.4.1.248.13.7.4.1.16.1.2.1

Entry for rate limit of each port.

Indexes

rlPortIndex

Column Syntax OID

rlPortIndex

The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.16.1.2.1.1

rlPortInputLimit

Value of the input rate limit. Its unit is megabits per
second. For a 100 Mbps port, the range is 1 to 100.
For a 1000 Mbps port, the range is 1 to 1000.
For a 10 Gbps port, the range is 1 to 10000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.16.1.2.1.2

rlPortOutputLimit

Value of the output rate limit. Its unit is megabits per
second. For a 100 Mbps port, the range is 1 to 100.
For a 1000 Mbps port, the range is 1 to 1000.
For a 10 Gbps port, the range is 1 to 10000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.16.1.2.1.3

rlPortInputStatus

Whether input rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.16.1.2.1.6

rlPortOutputStatus

Whether output rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.16.1.2.1.7

markerTable

table

.1.3.6.1.4.1.248.13.7.4.1.16.2.1 · 1 row entry · 7 columns

Open in standard view

The marker table.

markerEntry entry .1.3.6.1.4.1.248.13.7.4.1.16.2.1.1

Entry for marker table.

Indexes

markerIfIndex markerAclName

Column Syntax OID

markerIfIndex

The interface index of the marker table.
The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.1

markerAclName

The name of an ACL. Within a feature a unique
name is used to identify the list to which
the entry belongs in the device.

OctetString

Constraints:
range: 1-15

.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.2

markerActionBitList

The marker action bit list,
in right to left order.
for example:
0x3(11 in binary) means dscp(0) and precedence(1)
0x4(100 in binary) means priority(2).

Bitsr/w

Enumerated Values:

0	dscp
1	precedence
2	priority

.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.3

markerDscp

The DSCP value of the marker entry.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.4

markerPrecedence

The precedence value of the marker entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.5

markerPriority

The priority value of the marker entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.6

markerStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.7

prioAclToCosMappingTable

table

.1.3.6.1.4.1.248.13.7.4.1.16.3.1 · 1 row entry · 4 columns

Open in standard view

Table for ACL to CoS Mapping.

prioAclToCosMappingEntry entry .1.3.6.1.4.1.248.13.7.4.1.16.3.1.1

Entry for ACL to CoS Mapping.

Indexes

prioAclToCosMappingIfIndex prioAclToCosMappingAclName

Column Syntax OID

prioAclToCosMappingIfIndex

The port interface of the prioAclToCosMappingEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.16.3.1.1.1

prioAclToCosMappingAclName

The name of an IP ACL. Within a feature a unique name is
used to identify the list to which the entry belongs
in the device.

OctetString

Constraints:
range: 1-15

.1.3.6.1.4.1.248.13.7.4.1.16.3.1.1.2

prioAclToCosMappingCosValue

CoS value of the prioAclToCosMappingTable.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.248.13.7.4.1.16.3.1.1.3

prioAclToCosMappingStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.16.3.1.1.4

portSecPortTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.2.1 · 1 row entry · 4 columns

Open in standard view

The port security(MAC binding) Table.

portSecPortEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.2.1.1

The entry of portSecPortTable.

Indexes

portSecPortIndex

Column Syntax OID

portSecPortIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.17.2.1.1.1

portSecPortStatus

Set enabled(1) to enable port security and set disabled(2) to
disable port security.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.17.2.1.1.2

portSecAction

The corresponding actions that will take place when a
port is under intrusion, when this variable is set to
none(1), no action will be performed, when this variable is
set to trap(2), a swPortSecurityTrap trap will be s…

Enumerationr/w

Enumerated Values:

1	none
2	trap
3	shutdown
4	trapAndShutdown

.1.3.6.1.4.1.248.13.7.4.1.17.2.1.1.3

portSecMaxMacCount

The maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the num…

Integer32r/w

Constraints:
range: 0-1024

.1.3.6.1.4.1.248.13.7.4.1.17.2.1.1.4

radiusMultipleServerTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.4.7 · 1 row entry · 7 columns

Open in standard view

The table for multiple RADIUS server.

radiusMultipleServerEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.4.7.1

The conceptual row for radiusMultipleServerTable.

Indexes

radiusMultipleServerIndex

Column Syntax OID

radiusMultipleServerIndex

The RADIUS multiple server index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.1

radiusMultipleServerAddress

IP address of a multiple RADIUS server.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.2

radiusMultipleServerPortNumber

IP port number of a multiple RADIUS server.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.3

radiusMultipleServerKey

Key for RADIUS. This variable can only be set.
When this variable is read, it always returns a
zero-length string.

OctetStringr/w

Constraints:
range: 0-48

.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.4

radiusMultipleServerRetransmit

Maximum number of retransmissions for RADIUS.

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.5

radiusMultipleServerTimeout

Timeout for RADIUS.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.6

radiusMultipleServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.8

sshConnInfoTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.6.6 · 1 row entry · 7 columns

Open in standard view

The table for Secure Shell Connection.

sshConnInfoEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column Syntax OID

sshConnID

The connection ID of the Secure Shell Connection.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.1

sshConnMajorVersion

The SSH major version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.2

sshConnMinorVersion

The SSH minor version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.3

sshConnStatus

The SSH connection State. negotiationStart(1) means the
SSH is in its negotiation start state, authenticationStart(2)
means the SSH is in authentication start state, sessionStart(3)
means the SSH is in session start Sta…

Enumeration

Enumerated Values:

1	negotiationStart
2	authenticationStart
3	sessionStart

.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.5

sshConnUserName

The user name of the connection.

OctetString

Constraints:
range: 1-8

.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.6

sshDisconnect

Set the variable to disconnect the connection,
noDisconnect(1) will always be obtained when reading this variable.

Enumerationr/w

Enumerated Values:

1	noDisconnect
2	disconnect

.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.7

sshConnEncryptionTypeStr

The encryption type of the SSH.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.8

sshUserTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.6.29 · 1 row entry · 18 columns

Open in standard view

The conceptual table of all of sshUserEntry.

sshUserEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.6.29.1

The conceptual row for sshUserTable.

Indexes

sshUserName

Column Syntax OID

sshUserName

User Name.

OctetString

Constraints:
range: 1-8

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.1

sshUserRsaKey1

The RSA user key segment 1.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.2

sshUserRsaKey2

The RSA user key segment 2.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.3

sshUserRsaKey3

The RSA user key segment 3.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.4

sshUserRsaKey4

The RSA user key segment 4.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.5

sshUserRsaKey5

The RSA user key segment 5.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.6

sshUserRsaKey6

The RSA user key segment 6.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.7

sshUserRsaKey7

The RSA user key segment 7.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.8

sshUserRsaKey8

The RSA user key segment 8.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.9

sshUserDsaKey1

The DSA user key segment 1.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.10

sshUserDsaKey2

The DSA user key segment 2.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.11

sshUserDsaKey3

The DSA user key segment 3.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.12

sshUserDsaKey4

The DSA user key segment 4.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.13

sshUserDsaKey5

The DSA user key segment 5.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.14

sshUserDsaKey6

The DSA user key segment 6.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.15

sshUserDsaKey7

The DSA user key segment 7.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.16

sshUserDsaKey8

The DSA user key segment 8.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.17

sshUserKeyDelAction

To delete the user key.

For the set behavior:
Set it to delRsaKey(2) to delete the RSA user key,
to delDsaKey(3) to delete the DSA user key,
or to delBothKeys(4) to delete both RSA and DSA user key.
…

Enumerationr/w

Enumerated Values:

1	noDel
2	delRsaKey
3	delDsaKey
4	delBothKeys

.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.18

aclIpAceTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.7.1 · 1 row entry · 23 columns

Open in standard view

The conceptual table of all of aclIpAceEntry.

aclIpAceEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.7.1.1

The conceptual row for aclIpAceTable.

Indexes

aclIpAceName aclIpAceIndex

Column Syntax OID

aclIpAceName

The name of an ACL. Within a feature a unique
name is used to identify
the list to which the entry belongs in the device.

OctetString

Constraints:
range: 1-15

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.1

aclIpAceIndex

The unique index of an ACE within an ACL.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.2

aclIpAcePrecedence

Specifies the IP precedence value to be matched against.
This object cannot not be configured when the status of the
entry, aclIpAceStatus, is active(1).

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.3

aclIpAceAction

Indicates the action to be taken if a packet matches this ACE.
This object cannot not be configured when the status of the
entry, aclIpAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.4

aclIpAceSourceIpAddr

The specified source IP address. The packet's source address is
AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared
against the value of this object.
This object cannot be conf…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.5

aclIpAceSourceIpAddrBitmask

The specified source IP address mask. The packet's destination
address is AND-ed with the value of aclIpAceSourceIpAddr and then
compared against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.6

aclIpAceDestIpAddr

The specified destination IP address.
The packet's destination address is
AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared
against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.7

aclIpAceDestIpAddrBitmask

The specified destination IP address mask.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.8

aclIpAceProtocol

The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
value of 0 matches every IP packet. The object=256, means 'any'

For exam…

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.9

aclIpAcePrec

Specifies the IP precedence value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAcePre…

Integer32r/w

Constraints:
range: 0-8

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.10

aclIpAceTos

Specifies the IP ToS facility value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAceP…

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.11

aclIpAceDscp

Specifies the DSCP value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAcePrec object …

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.12

aclIpAceSourcePortOp

Indicates how a packet's source TCP/UDP port number is
to be compared. noOperator(1), which is the default value, means no
comparison is to be made with the source TCP/UDP port
number.

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.13

aclIpAceMinSourcePort

If the aclIpAceSourcePortOp is range(3),
this indicates the lower bound of the TCP/UDP port number value range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.14

aclIpAceMaxSourcePort

If the aclIpAceSourcePortOp is range(3),
this indicates the upper bound of the TCP/UDP port number value range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.15

aclIpAceSourcePortBitmask

If the aclIpAceSourcePortOp is equal(2),
this indicates the bitmask of the aclIpAceMinSourcePort.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.16

aclIpAceDestPortOp

Indicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value, means that no
comparison is to be made with the destination TCP/UDP port
number.

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.17

aclIpAceMinDestPort

If the aclIpAceDestPortOp is range(3),
this indicates the lower bound of the TCP/UDP port number value range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.18

aclIpAceMaxDestPort

If the aclIpAceDestPortOp is range(3),
this indicates the upper bound of the TCP/UDP port number value range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.19

aclIpAceDestPortBitmask

If the aclIpAceDestPortOp is equal(2),
this indicates the bitmask of the aclIpAceMinDestPort.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.20

aclIpAceControlCode

Indicates how the control flags of TCP packets are to be compared.
aceIpControlCode is AND-ed with aceIpControlCodeBitmask.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.21

aclIpAceControlCodeBitmask

Indicates how the control flags of TCP packets are to be compared.
It can be used to check multiple flags of the
FIN, SYN, RST, PSH, ACK, URG by the sum of
FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.22

aclIpAceStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.23

aclMacAceTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.7.2 · 1 row entry · 18 columns

Open in standard view

The conceptual table of all of aclMacAceEntry.

aclMacAceEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.7.2.1

The conceptual row for aclMacAceTable.

Indexes

aclMacAceName aclMacAceIndex

Column Syntax OID

aclMacAceName

The name of an ACL. Within a feature, a unique
name is used to identify
the list to which the entry belongs in the device.

OctetString

Constraints:
range: 1-15

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.1

aclMacAceIndex

The unique index of an ACE within an ACL.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.2

aclMacAcePrecedence

Specifies the entry's precedence.

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.3

aclMacAceAction

Indicates the action to be taken if a packet matches this ACE.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.4

aclMacAcePktformat

Used to check the packet format of the packets.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	any
2	untagged-Eth2
3	untagged802Dot3
4	tagggedEth2
5	tagged802Dot3

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.5

aclMacAceSourceMacAddr

Indicates the 48-bit destination MAC address.
The specified source MAC of the packet The packet's source MAC
address is AND-ed with the value of aceMacSourceMacAddrBitmask
and then compared against the value of this obj…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.6

aclMacAceSourceMacAddrBitmask

The specified source MAC address mask.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.7

aclMacAceDestMacAddr

Indicates the 48-bit destination MAC address.
The specified destination MAC of the packet.
The packet's destination MAC address is
AND-ed with the value of aceMacDestMacAddrBitmask and then compared
against the value of…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.8

aclMacAceDestMacAddrBitmask

The specified destination MAC address mask.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.9

aclMacAceVidOp

Indicates how a packet's vid is
to be compared.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.10

aclMacAceMinVid

Indicates the lower bound of the vid value range if the aclMacAceVidOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Integer32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.11

aclMacAceVidBitmask

The bitmask of vid if the aclMacAceVidOp is equal, default value is 0xfff.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.12

aclMacAceMaxVid

Indicates the upper bound of the vid value range if the aclMacAceVidOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Integer32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.13

aclMacAceEtherTypeOp

Indicates how a packet's ethertype is
to be compared.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.14

aclMacAceEtherTypeBitmask

The bitmask of vid if the aclMacAceVidOp is equal(2) , default value is 0xFFFF.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.15

aclMacAceMinEtherType

Indicates the lower bound of the vid value range if the aclMacAceEtherTypeOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Integer32r/w

Constraints:
range: 1536-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.16

aclMacAceMaxEtherType

Indicates the upper bound of the vid value range if the aclMacAceEtherTypeOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Integer32r/w

Constraints:
range: 1536-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.17

aclMacAceStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.18

aclAclGroupTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.7.3 · 1 row entry · 5 columns

Open in standard view

The conceptual table of aclAclGroupEntry.

aclAclGroupEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.7.3.1

The conceptual row for aclAclGroupTable.

Indexes

aclAclGroupIfIndex

Column	Syntax	OID
aclAclGroupIfIndex The interface number specifying the ACL binding to.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.13.7.4.1.17.7.3.1.1`
aclAclGroupIngressIpAcl Specifies the ingress IP ACL(standard or extended) binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.248.13.7.4.1.17.7.3.1.2`
aclAclGroupEgressIpAcl Specifies the egress IP ACL(standard or extended) binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.248.13.7.4.1.17.7.3.1.3`
aclAclGroupIngressMacAcl Specifies the ingress MAC ACL binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.248.13.7.4.1.17.7.3.1.4`
aclAclGroupEgressMacAcl Specifies the egress MAC ACL binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.248.13.7.4.1.17.7.3.1.5`

aclIngressIpMaskTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.7.4 · 1 row entry · 12 columns

Open in standard view

The conceptual table of aclIngressIpMaskEntry.

aclIngressIpMaskEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.7.4.1

The conceptual row for aclIngressIpMaskTable.

Indexes

aclIngressIpMaskIndex

Column Syntax OID

aclIngressIpMaskIndex

Indicates the bitmask of the source IP address. The relative
bitmask must be created before the ACE binds to the interface.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is activ…

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.1

aclIngressIpMaskPrecedence

Indicates whether to check the IP precedence against the packets,
The relative bitmask must be created before the
ACE binds to the interface in ingress direction.
This object cannot be configured
when the status of the …

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.2

aclIngressIpMaskIsEnableTos

Indicates whether to check the IP ToS facility against the packets,
The relative bitmask must be created before the
ACE binds to the interface in ingress direction.
This object cannot be configured when the status of th…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.3

aclIngressIpMaskIsEnableDscp

Indicates whether to check the IP DSCP against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry,…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.4

aclIngressIpMaskIsEnablePrecedence

Indicates whether to check the IP precednce against the packets.
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the
e…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.5

aclIngressIpMaskIsEnableProtocol

Indicates whether to check the IP protocol against the packets.
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the
e…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.6

aclIngressIpMaskSourceIpAddrBitmask

Indicates the source IP bitmask to check against the packets,
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the
e…

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.7

aclIngressIpMaskDestIpAddrBitmask

Indicates the destination IP bitmask to check against the packets,
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of th…

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.8

aclIngressIpMaskSourcePortBitmask

Indicates the source port bitmask to check against the TCP/UDP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the status …

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.9

aclIngressIpMaskDestPortBitmask

Indicates the destination port bitmask to check against the TCP/UDP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the st…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.10

aclIngressIpMaskControlCodeBitmask

Indicates the control code bitmask to check against the TCP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the status of t…

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.11

aclIngressIpMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.17.7.4.1.12

aclEgressIpMaskTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.7.5 · 1 row entry · 12 columns

Open in standard view

The conceptual table of aclEgressIpMaskEntry.

aclEgressIpMaskEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.7.5.1

The conceptual row for aclEgressIpMaskTable.

Indexes

aclEgressIpMaskIndex

Column Syntax OID

aclEgressIpMaskIndex

The index of a mask entry within a mask table.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.1

aclEgressIpMaskPrecedence

The created precedence of an mask entry within the mask table.

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.2

aclEgressIpMaskIsEnableTos

Indicates whether to check the IP ToS facility against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.3

aclEgressIpMaskIsEnableDscp

Indicates whether to check the IP DSCP against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entry,…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.4

aclEgressIpMaskIsEnablePrecedence

Indicates whether to check the IP precedence against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.5

aclEgressIpMaskIsEnableProtocol

Indicates whether to check the IP protocol against the packets.
The relative bitmask must be created before the ACE binds to
the interface in egress direction.
This object cannot be configured when the status of the
en…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.6

aclEgressIpMaskSourceIpAddrBitmask

Indicates the source IP bitmask to check against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entr…

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.7

aclEgressIpMaskDestIpAddrBitmask

Indicates the destination IP bitmask to check against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the…

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.8

aclEgressIpMaskSourcePortBitmask

Indicates the source port bitmask to check against the TCP/UDP packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status o…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.9

aclEgressIpMaskDestPortBitmask

Indicates the destination port bitmask to check against the TCP/UDP packets.
The relative bitmask must be created before
the ACE binds to the interface in egress direction.
This object cannot be configured when the stat…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.10

aclEgressIpMaskControlCodeBitmask

Indicates the control code bitmask to check against the TCP packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of t…

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.11

aclEgressIpMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.17.7.5.1.12

aclIngressMacMaskTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.7.6 · 1 row entry · 8 columns

Open in standard view

The conceptual table of aclIngressMacMaskEntry.

aclIngressMacMaskEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.7.6.1

The conceptual row for aclIngressMacMaskTable.

Indexes

aclIngressMacMaskIndex

Column Syntax OID

aclIngressMacMaskIndex

The index of an mask entry within an ingress mask table.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.248.13.7.4.1.17.7.6.1.1

aclIngressMacMaskPrecedence

The created order of an mask entry within an ingress mask table.

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.248.13.7.4.1.17.7.6.1.2

aclIngressMacMaskSourceMacAddrBitmask

Indicates the source MAC bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
en…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.248.13.7.4.1.17.7.6.1.3

aclIngressMacMaskDestMacAddrBitmask

Indicates the destination MAC bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of t…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.248.13.7.4.1.17.7.6.1.4

aclIngressMacMaskVidBitmask

Indicates the vid bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, ac…

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.248.13.7.4.1.17.7.6.1.5

aclIngressMacMaskEtherTypeBitmask

Indicates the ethertype bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
ent…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.6.1.6

aclIngressMacMaskIsEnablePktformat

Indicates whether to check the packet format against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.17.7.6.1.7

aclIngressMacMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.17.7.6.1.8

aclEgressMacMaskTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.7.7 · 1 row entry · 8 columns

Open in standard view

The conceptual table of aclEgressMacMaskEntry.

aclEgressMacMaskEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.7.7.1

The conceptual row for aclEgressMacMaskTable.

Indexes

aclEgressMacMaskIndex

Column Syntax OID

aclEgressMacMaskIndex

The index of a mask entry within an egress mask table.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.248.13.7.4.1.17.7.7.1.1

aclEgressMacMaskPrecedence

The created precedence of a mask entry within an egress mask table.

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.248.13.7.4.1.17.7.7.1.2

aclEgressMacMaskSourceMacAddrBitmask

Indicates the source MAC bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
en…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.248.13.7.4.1.17.7.7.1.3

aclEgressMacMaskDestMacAddrBitmask

Indicates the destination MAC bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of t…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.248.13.7.4.1.17.7.7.1.4

aclEgressMacMaskVidBitmask

Indicates the vid bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry, ac…

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.248.13.7.4.1.17.7.7.1.5

aclEgressMacMaskEtherTypeBitmask

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.13.7.4.1.17.7.7.1.6

aclEgressMacMaskIsEnablePktformat

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.17.7.7.1.7

aclEgressMacMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.17.7.7.1.8

aclIpTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.7.8 · 1 row entry · 1 columns

Open in standard view

The conceptual table of all of aclIpEntry.

aclIpEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.7.8.1

The conceptual row for aclIpTable.

Indexes

aclIpAclName

Column	Syntax	OID
aclIpAclName The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device.	OctetString Constraints: `range: 1-15`	`.1.3.6.1.4.1.248.13.7.4.1.17.7.8.1.1`

aclMacTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.7.9 · 1 row entry · 1 columns

Open in standard view

The conceptual table of all of aclMacEntry.

aclMacEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.7.9.1

The conceptual row for aclMacTable.

Indexes

aclMacAclName

Column	Syntax	OID
aclMacAclName The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device.	OctetString Constraints: `range: 1-15`	`.1.3.6.1.4.1.248.13.7.4.1.17.7.9.1.1`

ipFilterSnmpTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.9.1 · 1 row entry · 3 columns

Open in standard view

A list of IP address entries.

ipFilterSnmpEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.9.1.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

ipFilterSnmpStartAddress

Column Syntax OID

ipFilterSnmpStartAddress

The start IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.17.9.1.1.1

ipFilterSnmpEndAddress

The end IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.17.9.1.1.2

ipFilterSnmpStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.17.9.1.1.3

ipFilterHTTPTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.9.2 · 1 row entry · 3 columns

Open in standard view

A list of IP address entries.

ipFilterHTTPEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.9.2.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

ipFilterHTTPStartAddress

Column Syntax OID

ipFilterHTTPStartAddress

The start IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.17.9.2.1.1

ipFilterHTTPEndAddress

The end IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.17.9.2.1.2

ipFilterHTTPStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.17.9.2.1.3

ipFilterTelnetTable

table

.1.3.6.1.4.1.248.13.7.4.1.17.9.3 · 1 row entry · 3 columns

Open in standard view

A list of IP address entries.

ipFilterTelnetEntry entry .1.3.6.1.4.1.248.13.7.4.1.17.9.3.1

This entry includes an IP address range which the system
will allow them to connect to this device through SNMP.

Indexes

ipFilterTelnetStartAddress

Column Syntax OID

ipFilterTelnetStartAddress

The start IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.17.9.3.1.1

ipFilterTelnetEndAddress

The end IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.17.9.3.1.2

ipFilterTelnetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.17.9.3.1.3

arpProxyArpTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.1.4 · 1 row entry · 2 columns

Open in standard view

A list of Proxy ARP status. This table has entries
for all static VLANs.

arpProxyArpEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.1.4.1

An entry in the table, containing information
about Proxy ARP configuration.

Indexes

arpProxyArpIfIndex

Column Syntax OID

arpProxyArpIfIndex

This is defined as a VLAN interface.
A routing interface is a VLAN that binds an IP
subnet.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.18.1.4.1.1

arpProxyArpStatus

Enable or disable proxy ARP process on an interface.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.18.1.4.1.2

ripInstabilityPreventingTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.2.4 · 1 row entry · 2 columns

Open in standard view

A list of RIP instability preventing status.

ripInstabilityPreventingEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.2.4.1

An entry in the table, containing information
about RIP instability preventing configuration.
The ifIndex index is a VLAN's ifIndex.

Indexes

ripVlanIndex

Column Syntax OID

ripVlanIndex

This is defined as a VLAN interface.
A routing interface is a VLAN and an IP subnet bound to it.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.18.2.4.1.1

ripSplitHorizonStatus

Enable or disable RIP poison reverse on an interface.

Enumerationr/w

Enumerated Values:

1	splitHorizon
2	poisonReverse
3	none

.1.3.6.1.4.1.248.13.7.4.1.18.2.4.1.2

ripNetworkAddrTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.2.6 · 1 row entry · 2 columns

Open in standard view

The RIF network address table.

ripNetworkAddrEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.2.6.1

A conceptual row of the ripNetworkAddrTable.

Indexes

ripNetworkAddrAddress

Column Syntax OID

ripNetworkAddrAddress

The RIP Network address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.2.6.1.1

ripNetworkAddrStatus

Set this variable to create or destroy an RIP network address.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.18.2.6.1.2

ospfNssaTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.3.2 · 1 row entry · 4 columns

Open in standard view

A conceptually table for ospfNssaEntry.

ospfNssaEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.3.2.1

A conceptually row for ospfNssaTable.

Indexes

ospfNssaAreaId

Column Syntax OID

ospfNssaAreaId

The 32-bit identifier for the NSSA. On creation,
this can be derived from the instance.

OspfAreaID

Textual Convention: OspfAreaID OctetString

.1.3.6.1.4.1.248.13.7.4.1.18.3.2.1.1

ospfNssaRedistributeStatus

Enabled or disabled to import routes only into the normal areas,
but not into the NSSA area.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.18.3.2.1.2

ospfNssaOriginateDefaultInfoStatus

Enable or disable to generate a Type 7 default into the NSSA area.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.248.13.7.4.1.18.3.2.1.3

ospfNssaStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.18.3.2.1.4

ospfRedistributeTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.3.3 · 1 row entry · 4 columns

Open in standard view

The conceptual table of all of ospfRedistributeEntry.

ospfRedistributeEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.3.3.1

The conceptual row for ospfRedistributeTable.

Indexes

ospfRedistributeProtocol

Column Syntax OID

ospfRedistributeProtocol

Protocol ID. Static is not supported now.

Enumeration

Enumerated Values:

1	rip
2	static

.1.3.6.1.4.1.248.13.7.4.1.18.3.3.1.1

ospfRedistributeMetricType

Metric type.

Enumerationr/w

Enumerated Values:

1	type1
2	type2

.1.3.6.1.4.1.248.13.7.4.1.18.3.3.1.2

ospfRedistributeMetric

Metric value.

OspfBigMetricr/w

Textual Convention: OspfBigMetric Integer32

.1.3.6.1.4.1.248.13.7.4.1.18.3.3.1.3

ospfRedistributeStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.18.3.3.1.4

ospfSummaryAddressTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.3.4 · 1 row entry · 3 columns

Open in standard view

The conceptual table of all of ospfSummaryAddressEntry.

ospfSummaryAddressEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.3.4.1

The conceptual row for ospfSummaryAddressTable.

Indexes

ospfSummaryAddress ospfSummaryMask

Column Syntax OID

ospfSummaryAddress

Summary address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.3.4.1.1

ospfSummaryMask

Summary mask.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.3.4.1.2

ospfSummaryStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.18.3.4.1.3

ospfNetworkAreaAddressTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.3.5 · 1 row entry · 4 columns

Open in standard view

The conceptual table of all of ospfNetworkAreaAddressEntry.

ospfNetworkAreaAddressEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.3.5.1

The conceptual row for ospfNetworkAreaAddressTable.

Indexes

ospfNetworkAareaAddress ospfNetworkAreaMask

Column Syntax OID

ospfNetworkAareaAddress

NetworkArea address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.3.5.1.1

ospfNetworkAreaMask

NetworkArea mask.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.3.5.1.2

ospfNetworkAreaAreaId

NetworkArea area ID.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.3.5.1.3

ospfNetworkAreaStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.18.3.5.1.4

dvmrpInterfaceTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.4.2 · 1 row entry · 10 columns

Open in standard view

The (conceptual) table listing the router's multicast-capable
interfaces.

dvmrpInterfaceEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.4.2.1

An entry (conceptual row) in the dvmrpInterfaceTable. This
row augments ipMRouteInterfaceEntry in the IP multicast MIB,
where the threshold object resides.

Indexes

dvmrpInterfaceIndex

Column Syntax OID

dvmrpInterfaceIndex

The ifIndex value of the interface for which DVMRP is
enabled.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.248.13.7.4.1.18.4.2.1.1

dvmrpInterfaceLocalAddress

The IP address this system will use as a source address on
this interface. On unnumbered interfaces, it must be the
same value as dvmrpInterfaceLocalAddress for some interface
on the system.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.4.2.1.2

dvmrpInterfaceMetric

The distance metric for this interface which is used to
calculate distance vectors.

Integer32r/w

Constraints:
range: 1-31

.1.3.6.1.4.1.248.13.7.4.1.18.4.2.1.3

dvmrpInterfaceStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.18.4.2.1.4

dvmrpInterfaceRcvBadPkts

The number of DVMRP messages received on the interface by
the DVMRP process which were subsequently discarded as
invalid (e.g. invalid packet format, or a route report from
an unknown neighbor).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.18.4.2.1.5

dvmrpInterfaceRcvBadRoutes

The number of routes, in valid DVMRP packets, which were
ignored because the entry was invalid.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.18.4.2.1.6

dvmrpInterfaceSentRoutes

The number of routes, in DVMRP Report packets, which have
been sent on this interface. Together with
dvmrpNeighborRcvRoutes as a peer, this object is useful for
detecting routes being lost.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.18.4.2.1.7

dvmrpInterfaceKey

The (shared) key for authenticating neighbors on this
interface. This object is intended solely for the purpose
of setting the interface key, and must be accessible only
via requests using both authentication and privac…

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.13.7.4.1.18.4.2.1.8

dvmrpInterfaceKeyVersion

The highest version number of all known interface keys for
this interface used for authenticating neighbors.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.18.4.2.1.9

dvmrpInterfaceGenerationId

The generation identifier for the interface. This is used
by neighboring routers to detect whether the DVMRP routing
table should be resent.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.18.4.2.1.10

dvmrpNeighborTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.4.3 · 1 row entry · 12 columns

Open in standard view

The (conceptual) table listing the router's DVMRP
neighbors, as discovered by receiving DVMRP messages.

dvmrpNeighborEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.4.3.1

An entry (conceptual row) in the dvmrpNeighborTable.

Indexes

dvmrpNeighborIfIndex dvmrpNeighborAddress

Column Syntax OID

dvmrpNeighborIfIndex

The value of ifIndex for the virtual interface used to
reach this DVMRP neighbor.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.1

dvmrpNeighborAddress

The IP address of the DVMRP neighbor for which this entry
contains information.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.2

dvmrpNeighborUpTime

The time since this DVMRP neighbor (last) became a neighbor
of the local router.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.3

dvmrpNeighborExpiryTime

The minimum time remaining before this DVMRP neighbor will
be aged out.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.4

dvmrpNeighborGenerationId

The neighboring router's generation identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.5

dvmrpNeighborMajorVersion

The neighboring router's major DVMRP version number.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.6

dvmrpNeighborMinorVersion

The neighboring router's minor DVMRP version number.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.7

dvmrpNeighborCapabilities

This object describes the neighboring router's
capabilities. The leaf bit indicates that the neighbor has
only one interface with neighbors. The prune bit indicates
that the neighbor supports pruning. The generationID b…

Bits

Enumerated Values:

0	leaf
1	prune
2	generationID
3	mtrace

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.8

dvmrpNeighborRcvRoutes

The total number of routes received in valid DVMRP packets
from this neighbor.This can be used to diagnose problems
such as unicast route injection, as well as giving
an indication of the level of DVMRP route exchange
a…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.9

dvmrpNeighborRcvBadPkts

The number of packet received from this neighbor which were
discarded as invalid.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.10

dvmrpNeighborRcvBadRoutes

The number of routes, in valid DVMRP packets received from
this neighbor, which were ignored because the entry was
invalid.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.11

dvmrpNeighborState

State of the neighbor adjacency.

Enumeration

Enumerated Values:

1	oneway
2	active
3	ignoring
4	down

.1.3.6.1.4.1.248.13.7.4.1.18.4.3.1.12

dvmrpRouteTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.4.4 · 1 row entry · 7 columns

Open in standard view

The table of routes learned through DVMRP route exchange.

dvmrpRouteEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.4.4.1

An entry (conceptual row) containing the multicast routing
information used by DVMRP in place of unicast routing
information.

Indexes

dvmrpRouteSource dvmrpRouteSourceMask

Column	Syntax	OID
dvmrpRouteSource The network address which when combined with the corresponding value of dvmrpRouteSourceMask identifies the sources for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.248.13.7.4.1.18.4.4.1.1`
dvmrpRouteSourceMask The network mask which when combined with the corresponding value of dvmrpRouteSource identifies the sources for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.248.13.7.4.1.18.4.4.1.2`
dvmrpRouteUpstreamNeighbor The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.248.13.7.4.1.18.4.4.1.3`
dvmrpRouteIfIndex The value of the ifIndex for the interface on which IP datagrams sent by these sources are received. A value of 0 typically means the route is an aggregate for which no next- hop interface exists.	IF-MIBInterfaceIndexOrZero Textual Convention: IF-MIBInterfaceIndexOrZero `Integer32` Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.248.13.7.4.1.18.4.4.1.4`
dvmrpRouteMetric The distance in hops to the source subnet.	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.248.13.7.4.1.18.4.4.1.5`
dvmrpRouteExpiryTime The minimum amount of time remaining before this entry will be aged out.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.248.13.7.4.1.18.4.4.1.6`
dvmrpRouteUpTime The time since the route represented by this entry was learned by the router.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.248.13.7.4.1.18.4.4.1.7`

dvmrpRouteNextHopTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.4.5 · 1 row entry · 4 columns

Open in standard view

The (conceptual) table containing information on the next
hops on outgoing interfaces for routing IP multicast
datagrams.

dvmrpRouteNextHopEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.4.5.1

An entry (conceptual row) in the list of next hops on
outgoing interfaces to which IP multicast datagrams from
particular sources are routed.

Indexes

dvmrpRouteNextHopSource dvmrpRouteNextHopSourceMask dvmrpRouteNextHopIfIndex

Column Syntax OID

dvmrpRouteNextHopSource

The network address which when combined with the
corresponding value of dvmrpRouteNextHopSourceMask
identifies the sources for which this entry specifies a next
hop on an outgoing interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.4.5.1.1

dvmrpRouteNextHopSourceMask

The network mask which when combined with the corresponding
value of dvmrpRouteNextHopSource identifies the sources for
which this entry specifies a next hop on an outgoing
interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.4.5.1.2

dvmrpRouteNextHopIfIndex

The ifIndex value of the interface for the outgoing
interface for this next hop.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.248.13.7.4.1.18.4.5.1.3

dvmrpRouteNextHopType

Type is leaf if no downstream dependent neighbors exist on
the outgoing virtual interface. Otherwise, type is branch.

Enumeration

Enumerated Values:

1	leaf
2	branch

.1.3.6.1.4.1.248.13.7.4.1.18.4.5.1.4

dvmrpPruneTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.4.6 · 1 row entry · 4 columns

Open in standard view

The (conceptual) table listing the router's upstream prune
state.

dvmrpPruneEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.4.6.1

An entry (conceptual row) in the dvmrpPruneTable.

Indexes

dvmrpPruneGroup dvmrpPruneSource dvmrpPruneSourceMask

Column	Syntax	OID
dvmrpPruneGroup The group address which has been pruned.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.248.13.7.4.1.18.4.6.1.1`
dvmrpPruneSource The address of the source or source network which has been pruned.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.248.13.7.4.1.18.4.6.1.2`
dvmrpPruneSourceMask The address of the source or source network which has been pruned. The mask must either be all 1's, or else dvmrpPruneSource and dvmrpPruneSourceMask must match dvmrpRouteSource and dvmrpRouteSourceMask for some entry i…	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.248.13.7.4.1.18.4.6.1.3`
dvmrpPruneExpiryTime The amount of time remaining before this prune should expire at the upstream neighbor. This value should be the minimum of the default prune lifetime and the remaining prune lifetimes of the local router's downstream ne…	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.248.13.7.4.1.18.4.6.1.4`

ipCidrRouteExtTable

table

.1.3.6.1.4.1.248.13.7.4.1.18.5.2 · 1 row entry · 5 columns

Open in standard view

This entity's IP Extension Routing table.

ipCidrRouteExtEntry entry .1.3.6.1.4.1.248.13.7.4.1.18.5.2.1

A particular route to a particular destination,
under a particular policy.

Indexes

ipCidrRouteExtDest ipCidrRouteExtMask ipCidrRouteExtTos ipCidrRouteExtNextHop

Column Syntax OID

ipCidrRouteExtDest

The destination IP address of this route.

This object may not take a Multicast (Class D)
address value.

Any assignment (implicit or otherwise) of an
instance of this object to a value x mus…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.5.2.1.1

ipCidrRouteExtMask

Indicates the mask to be logically-ANDed with the
destination address before being compared to
the value in the ipCidrRouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent constructs th…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.5.2.1.2

ipCidrRouteExtTos

The policy specifier is the IP TOS Field. The encoding
of IP TOS is as specified by the following convention.
Zero indicates the default path if no more specific
policy applies.

+-----+-----+-----+-----+…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.18.5.2.1.3

ipCidrRouteExtNextHop

On remote routes, the address of the next system en route;
Otherwise, 0.0.0.0.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.18.5.2.1.4

ipCidrRouteExtOspfSubType

The OSPF SubType, when the ipCidrRouteProto in IP-FORWARD MIB is
ospf(13), this object has the value (2)-(7), otherwises, this object
will always show none(1).

Enumeration

Enumerated Values:

1	none
2	ospfInter
3	ospfIntra
4	ospfNssa1
5	ospfNssa2
6	ospfType1
7	ospfType2

.1.3.6.1.4.1.248.13.7.4.1.18.5.2.1.5

remoteLogServerTable

table

.1.3.6.1.4.1.248.13.7.4.1.19.6.4 · 1 row entry · 2 columns

Open in standard view

A Table for storing the remote log Server list.

remoteLogServerEntry entry .1.3.6.1.4.1.248.13.7.4.1.19.6.4.1

A conceptually row for remoteLogServerTable.

Indexes

remoteLogServerIp

Column Syntax OID

remoteLogServerIp

The IP address of the remote log Server.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.19.6.4.1.1

remoteLogServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.19.6.4.1.2

smtpServerIpTable

table

.1.3.6.1.4.1.248.13.7.4.1.19.7.4 · 1 row entry · 2 columns

Open in standard view

The SMTP server IP table.
The maximum servers to be added is 3.

smtpServerIpEntry entry .1.3.6.1.4.1.248.13.7.4.1.19.7.4.1

A conceptual row of the smtpServerIpTable.

Indexes

smtpServerIp

Column Syntax OID

smtpServerIp

SMTP mail server's IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.19.7.4.1.1

smtpServerIpStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.19.7.4.1.2

smtpDestEMailTable

table

.1.3.6.1.4.1.248.13.7.4.1.19.7.5 · 1 row entry · 2 columns

Open in standard view

The table of the destination e-mail address.
The maximum numbers of destination email address to be added is 5.

smtpDestEMailEntry entry .1.3.6.1.4.1.248.13.7.4.1.19.7.5.1

A conceptual row of the smtpDestEMailTable.

Indexes

smtpDestEMail

Column Syntax OID

smtpDestEMail

SMTP destination e-mail address.

OctetString

Constraints:
range: 0-41

.1.3.6.1.4.1.248.13.7.4.1.19.7.5.1.1

smtpDestEMailStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.19.7.5.1.2

sntpServerTable

table

.1.3.6.1.4.1.248.13.7.4.1.23.1.4 · 1 row entry · 2 columns

Open in standard view

Table for SNTP servers

sntpServerEntry entry .1.3.6.1.4.1.248.13.7.4.1.23.1.4.1

Entry for SNTP servers.

Indexes

sntpServerIndex

Column	Syntax	OID
sntpServerIndex The index of a server. This table has fixed size.	Integer32 Constraints: `range: 1-3`	`.1.3.6.1.4.1.248.13.7.4.1.23.1.4.1.1`
sntpServerIpAddress The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index are 0.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.248.13.7.4.1.23.1.4.1.2`

fileInfoTable

table

.1.3.6.1.4.1.248.13.7.4.1.24.2.1 · 1 row entry · 7 columns

Open in standard view

This table contain the information of the file system;
we can also perform the delete, set startup file operation.

fileInfoEntry entry .1.3.6.1.4.1.248.13.7.4.1.24.2.1.1

A conceptually row for fileInfoTable.

Indexes

fileInfoUnitID fileInfoFileName

Column Syntax OID

fileInfoUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.24.2.1.1.1

fileInfoFileName

The file Name of the file System in the device.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.248.13.7.4.1.24.2.1.1.2

fileInfoFileType

The file type of the file System in the device.

Enumeration

Enumerated Values:

1	diag
2	runtime
3	syslog
4	cmdlog
5	config
6	postlog
7	private
8	certificate
9	webarchive

.1.3.6.1.4.1.248.13.7.4.1.24.2.1.1.3

fileInfoIsStartUp

This flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.248.13.7.4.1.24.2.1.1.4

fileInfoFileSize

The sizes( in bytes) of the file.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.24.2.1.1.5

fileInfoCreationTime

The creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A single-d…

OctetString

Constraints:
range: 20-20

.1.3.6.1.4.1.248.13.7.4.1.24.2.1.1.6

fileInfoDelete

Write this object to delete(2) to delete a file, when
read, this always return noDelete(1).

Enumerationr/w

Enumerated Values:

1	noDelete
2	delete

.1.3.6.1.4.1.248.13.7.4.1.24.2.1.1.7

fileAutoDownloadResultTable

table

.1.3.6.1.4.1.248.13.7.4.1.24.3 · 1 row entry · 3 columns

Open in standard view

This table contains file auto download result information.

fileAutoDownloadResultEntry entry .1.3.6.1.4.1.248.13.7.4.1.24.3.1

A conceptual row for fileAutoDownloadResultTable.

Indexes

fileAutoDownloadResultUnitID

Column Syntax OID

fileAutoDownloadResultUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.24.3.1.1

fileAutoDownloadResultAction

The status of the auto download action.
value copying(2) will be obtained if the auto download action is currently processing,
or value notCopying(1) will be obtained if no auto download action is currently processing.
…

Enumeration

Enumerated Values:

1	notCopying
2	copying

.1.3.6.1.4.1.248.13.7.4.1.24.3.1.2

fileAutoDownloadResultStatus

The last auto download result status.
value fileCopyUnknown(18) will be obtained
if no download action has been performed before.

FileCopyStatus

Textual Convention: FileCopyStatus Enumeration

Type Values:

1	fileCopyTftpUndefError
2	fileCopyTftpFileNotFound
3	fileCopyTftpAccessViolation
4	fileCopyTftpDiskFull
5	fileCopyTftpIllegalOperation
6	fileCopyTftpUnkownTransferId
7	fileCopyTftpFileExisted
8	fileCopyTftpNoSuchUser
9	fileCopyTftpTimeout
10	fileCopyTftpSendError
11	fileCopyTftpReceiverError
12	fileCopyTftpSocketOpenError
13	fileCopyTftpSocketBindError
14	fileCopyTftpUserCancel
15	fileCopyTftpCompleted
16	fileCopyParaError
17	fileCopyBusy
18	fileCopyUnknown
19	fileCopyReadFileError
20	fileCopySetStartupError
21	fileCopyFileSizeExceed
22	fileCopyMagicWordError
23	fileCopyImageTypeError
24	fileCopyHeaderChecksumError
25	fileCopyImageChecksumError
26	fileCopyWriteFlashFinish
27	fileCopyWriteFlashError
28	fileCopyWriteFlashProgramming
29	fileCopyError
30	fileCopySuccess
31	fileCopyCompleted

.1.3.6.1.4.1.248.13.7.4.1.24.3.1.3

dnsHostTable

table

.1.3.6.1.4.1.248.13.7.4.1.26.3 · 1 row entry · 3 columns

Open in standard view

This table is used to define static host name-to-address mapping.

dnsHostEntry entry .1.3.6.1.4.1.248.13.7.4.1.26.3.1

A conceptual row for the dnsHostTable.

Indexes

dnsHostName dnsHostIndex

Column	Syntax	OID
dnsHostName The DNS Host name.	OctetString Constraints: `range: 1-255`	`.1.3.6.1.4.1.248.13.7.4.1.26.3.1.1`
dnsHostIndex The secondary index of this dnsHostTable, representing the sequence of the dnsHostIp.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.248.13.7.4.1.26.3.1.2`
dnsHostIp The DNS Host IP.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.248.13.7.4.1.26.3.1.3`

dnsAliasTable

table

.1.3.6.1.4.1.248.13.7.4.1.26.4 · 1 row entry · 2 columns

Open in standard view

This table displays the alias of the host name.

dnsAliasEntry entry .1.3.6.1.4.1.248.13.7.4.1.26.4.1

A conceptual row for the dnsAliasTable.

Indexes

dnsAliasName dnaAliasAlias

Column	Syntax	OID
dnsAliasName Host name.	OctetString Constraints: `range: 1-255`	`.1.3.6.1.4.1.248.13.7.4.1.26.4.1.1`
dnaAliasAlias Alias.	OctetString Constraints: `range: 1-255`	`.1.3.6.1.4.1.248.13.7.4.1.26.4.1.2`

dnsDomainListTable

table

.1.3.6.1.4.1.248.13.7.4.1.26.5 · 1 row entry · 2 columns

Open in standard view

This table defines a list of default domain names to complete unqualified host names.

dnsDomainListEntry entry .1.3.6.1.4.1.248.13.7.4.1.26.5.1

A conceptual row for the dnsDomainListTable.

Indexes

dnsDomainListName

Column Syntax OID

dnsDomainListName

Domain name.

OctetString

Constraints:
range: 1-255

.1.3.6.1.4.1.248.13.7.4.1.26.5.1.1

dnsDomainListStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.248.13.7.4.1.26.5.1.2

dnsNameServerTable

table

.1.3.6.1.4.1.248.13.7.4.1.26.6 · 1 row entry · 2 columns

Open in standard view

To specify the address of one or more
name servers to use for name and address resolution.
This table has fixed size, will get 0.0.0.0 dnsNameServerIp
if this entry is not existed.

dnsNameServerEntry entry .1.3.6.1.4.1.248.13.7.4.1.26.6.1

A conceptual row for dnsNameServerTable.

Indexes

dnsNameServerIndex

Column	Syntax	OID
dnsNameServerIndex Index of this dnsNameServerTable, representing the sequence of the dnsNameServerIp.	Integer32 Constraints: `range: 1-6`	`.1.3.6.1.4.1.248.13.7.4.1.26.6.1.1`
dnsNameServerIp IP address of name server.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.248.13.7.4.1.26.6.1.2`

dnsCacheTable

table

.1.3.6.1.4.1.248.13.7.4.1.26.7 · 1 row entry · 6 columns

Open in standard view

To display the RRs in DNS cache.

dnsCacheEntry entry .1.3.6.1.4.1.248.13.7.4.1.26.7.1

A conceptual row for the dnsCacheTable.

Indexes

dnsCacheIndex

Column Syntax OID

dnsCacheIndex

The entry sequence number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.26.7.1.1

dnsCacheFlag

Always get 4, means this record is unreliable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.13.7.4.1.26.7.1.2

dnsCacheType

Cache Type: address(1); cname(2).

Enumeration

Enumerated Values:

1	address
2	cname

.1.3.6.1.4.1.248.13.7.4.1.26.7.1.3

dnsCacheIp

The DNS cache IP.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.26.7.1.4

dnsCacheTtl

The DNS cache TTL.

Integer32

Constraints:
range: 0-876000

.1.3.6.1.4.1.248.13.7.4.1.26.7.1.5

dnsCacheDomain

The DNS cache domain.

OctetString

Constraints:
range: 1-255

.1.3.6.1.4.1.248.13.7.4.1.26.7.1.6

cHsrpGrpTable

table

.1.3.6.1.4.1.248.13.7.4.1.29.2.1 · 1 row entry · 17 columns

Open in standard view

A table containing information on each HSRP group
for each interface.

cHsrpGrpEntry entry .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1

Information about an HSRP group. Management applications
use cHsrpGrpRowStatus to control entry modification, creation
and deletion.

Setting cHsrpGrpRowStatus to 'active' causes the router to
communicate us…

Indexes

IF-MIBifIndex cHsrpGrpNumber

Column Syntax OID

cHsrpGrpNumber

This object along with the ifIndex of a particular interface
uniquely identifies an HSRP group.

Group numbers 0,1 and 2 are the only valid group numbers
for TokenRing interfaces. For other media types, nu…

Unsigned32

Constraints:
range: 0-255

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.1

cHsrpGrpAuth

This is an unencrypted authentication string which is
carried in all HSRP messages. An authentication string
mismatch prevents a router interface from learning the
designated IP address or HSRP timer values from
other H…

OctetStringr/w

Constraints:
range: 0-8

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.2

cHsrpGrpPriority

The cHsrpGrpPriority helps to select the active
and the standby routers. The router with the highest priority
is selected as the active router. In the priority range of
0 to 255, 0 is the lowest priority and 255 is the …

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.3

cHsrpGrpPreempt

This object, if true, indicates that the current router
should attempt to overthrow a lower priority active
router and attempt to become the active router. If this
object is false, the router will become the active rout…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.4

cHsrpGrpPreemptDelay

This delay is the time difference between a router power up
and the time it can actually start preempting the currently
active router.

When a router first comes up, it doesn't have a complete
routing tabl…

Unsigned32r/w

Constraints:
range: 0-3600

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.5

cHsrpGrpUseConfiguredTimers

HSRP routers learn a group's Hellotime or Holdtime from hello
messages.

The Hellotime is used to determine the frequency of
generating hello messages when this router becomes the active
or standby router.…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.6

cHsrpGrpConfiguredHelloTime

If cHsrpGrpUseConfiguredTimers is true,
cHsrpGrpConfiguredHelloTime is used when this router is an
active router. Otherwise, the Hellotime learned from the
current active router is used. All routers on a particular
LAN …

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.7

cHsrpGrpConfiguredHoldTime

If cHsrpGrpUseConfiguredTimers is true,
cHsrpGrpConfiguredHoldTime is used when this router is an
active router. Otherwise, the Holdtime learned from the
current active router is used. All routers on a particular
LAN se…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.8

cHsrpGrpLearnedHelloTime

If the Hellotime is not configured on a router, it can be
learned from the Hello messages from active router, provided
the Hello message is authenticated. If the Hellotime is not
learned from a Hello message from the ac…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.9

cHsrpGrpLearnedHoldTime

If the Holdtime is not configured on a router, it can be
learned from the Hello message from the active router.
Holdtime should be learned only if the Hello message is
authenticated. If the Holdtime is not learned and i…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.10

cHsrpGrpVirtualIpAddr

This is the primary virtual IP address used by this group.
If this address is configured (i.e a non zero IP address),
this value is used. Otherwise, the agent will attempt to
discover the virtual address through a disco…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.11

cHsrpGrpUseConfigVirtualIpAddr

If this object is true, cHsrpGrpVirtualIpAddr was a
configured one. Otherwise, it indicates that
cHsrpGrpVirtualIpAddr was a learned one.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.12

cHsrpGrpActiveRouter

IP Address of the currently active router for this group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.13

cHsrpGrpStandbyRouter

IP Address of the currently standby router for this group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.14

cHsrpGrpStandbyState

The current HSRP state of this group on this interface.

HsrpState

Textual Convention: HsrpState Enumeration

Type Values:

1	initial
2	learn
3	listen
4	speak
5	standby
6	active

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.15

cHsrpGrpVirtualMacAddr

Mac Addresses used are as specified in RFC 2281. For ethernet
and fddi interfaces, a MAC address will be in the range
00:00:0c:07:ac:00 through 00:00:0c:07:ac:ff. The last octet is
the hexadecimal equivalent of cHsrpGrp…

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.16

cHsrpGrpEntryRowStatus

The control that allows modification, creation, and deletion
of entries. For detailed rules see the DESCRIPTION for
cHsrpGrpEntry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.17

cHsrpExtIfTrackedTable

table

.1.3.6.1.4.1.248.13.7.4.1.29.3.1 · 1 row entry · 3 columns

Open in standard view

A table containing information about tracked interfaces per
HSRP group.

cHsrpExtIfTrackedEntry entry .1.3.6.1.4.1.248.13.7.4.1.29.3.1.1

The cHsrpExtIfTrackedEntry allows an HSRP group
interface to track one or more interfaces. Weight(priority)
is given to each and every interface tracked. When a tracked
interface is unavailable, the HSRP priority of the…

Indexes

IF-MIBifIndex cHsrpGrpNumber cHsrpExtIfTracked

Column Syntax OID

cHsrpExtIfTracked

Index into the cHsrpExtIfTrackedTable for the
corresponding { ifIndex, cHsrpGrpNumber } pair i.e for an
HSRP group. This is the ifIndex of the tracked interface.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.248.13.7.4.1.29.3.1.1.1

cHsrpExtIfTrackedPriority

Priority of the tracked interface for the corresponding
{ ifIndex, cHsrpGrpNumber } pair. In the range of 0 to 255, 0
is the lowest priority and 255 is the highest. When a tracked
interface is unavailable, the cHsrpGrpP…

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.248.13.7.4.1.29.3.1.1.2

cHsrpExtIfTrackedRowStatus

The control that allows modification, creation, and deletion
of entries. For detailed rules see the DESCRIPTION for
cHsrpExtIfTrackedEntry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.29.3.1.1.3

cHsrpExtSecAddrTable

table

.1.3.6.1.4.1.248.13.7.4.1.29.3.2 · 1 row entry · 2 columns

Open in standard view

A table containing information about secondary HSRP IP
Addresses per interface and group.

cHsrpExtSecAddrEntry entry .1.3.6.1.4.1.248.13.7.4.1.29.3.2.1

The CHsrpExtSecAddrEntry allows creation of secondary
IP Addresses for each cHsrpGrpEntry row.

Secondary addresses can be added by setting
cHsrpExtSecAddrRowStatus to be active. The value of
cHsrpExtSecAddr…

Indexes

IF-MIBifIndex cHsrpGrpNumber cHsrpExtSecAddrAddress

Column Syntax OID

cHsrpExtSecAddrAddress

A secondary IpAddress for the {ifIndex, cHsrpGrpNumber} pair.
As explained in the DESCRIPTION for cHsrpExtSecAddrEntry, a
primary address must exist before a secondary address for
the same {ifIndex, cHsrpGrpNumber} pair…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.248.13.7.4.1.29.3.2.1.1

cHsrpExtSecAddrRowStatus

The control that allows modification, creation, and deletion
of entries. For detailed rules see the DESCRIPTION for
cHsrpExtSecAddrEntry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.248.13.7.4.1.29.3.2.1.2