cHsrpGrpPreempt
Hirschmann-LION-24TP-MIB ·
.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.4
Object
This object, if true, indicates that the current router should attempt to overthrow a lower priority active router and attempt to become the active router. If this object is false, the router will become the active router only if there is no such router (or if an active router fails).
Context
- MIB
- Hirschmann-LION-24TP-MIB
- OID
.1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cHsrpGrpEntry
- Table
- cHsrpGrpTable
- Siblings
- 16
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cHsrpGrpNumber This object along with the ifIndex of a particular interface
uniquely identifies an HSRP group.
Group numbers 0,1 and 2 are the only valid group numbers
for TokenRi… | column | Unsigned32 | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.1 |
| cHsrpGrpLearnedHoldTime If the Holdtime is not configured on a router, it can be
learned from the Hello message from the active router.
Holdtime should be learned only if the Hello message is
authenticat… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.10 |
| cHsrpGrpVirtualIpAddr This is the primary virtual IP address used by this group.
If this address is configured (i.e a non zero IP address),
this value is used. Otherwise, the agent will attempt to
disc… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.11 |
| cHsrpGrpUseConfigVirtualIpAddr If this object is true, cHsrpGrpVirtualIpAddr was a
configured one. Otherwise, it indicates that
cHsrpGrpVirtualIpAddr was a learned one. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.12 |
| cHsrpGrpActiveRouter IP Address of the currently active router for this group. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.13 |
| cHsrpGrpStandbyRouter IP Address of the currently standby router for this group. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.14 |
| cHsrpGrpStandbyState The current HSRP state of this group on this interface. | column | HsrpState | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.15 |
| cHsrpGrpVirtualMacAddr Mac Addresses used are as specified in RFC 2281. For ethernet
and fddi interfaces, a MAC address will be in the range
00:00:0c:07:ac:00 through 00:00:0c:07:ac:ff. The last octet i… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.16 |
| cHsrpGrpEntryRowStatus The control that allows modification, creation, and deletion
of entries. For detailed rules see the DESCRIPTION for
cHsrpGrpEntry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.17 |
| cHsrpGrpAuth This is an unencrypted authentication string which is
carried in all HSRP messages. An authentication string
mismatch prevents a router interface from learning the
designated IP a… | column | OctetString | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.2 |
| cHsrpGrpPriority The cHsrpGrpPriority helps to select the active
and the standby routers. The router with the highest priority
is selected as the active router. In the priority range of
0 to 255, … | column | Unsigned32 | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.3 |
| cHsrpGrpPreemptDelay This delay is the time difference between a router power up
and the time it can actually start preempting the currently
active router.
When a router first comes up,… | column | Unsigned32 | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.5 |
| cHsrpGrpUseConfiguredTimers HSRP routers learn a group's Hellotime or Holdtime from hello
messages.
The Hellotime is used to determine the frequency of
generating hello messages when this rout… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.6 |
| cHsrpGrpConfiguredHelloTime If cHsrpGrpUseConfiguredTimers is true,
cHsrpGrpConfiguredHelloTime is used when this router is an
active router. Otherwise, the Hellotime learned from the
current active router i… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.7 |
| cHsrpGrpConfiguredHoldTime If cHsrpGrpUseConfiguredTimers is true,
cHsrpGrpConfiguredHoldTime is used when this router is an
active router. Otherwise, the Holdtime learned from the
current active router is … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.8 |
| cHsrpGrpLearnedHelloTime If the Hellotime is not configured on a router, it can be
learned from the Hello messages from active router, provided
the Hello message is authenticated. If the Hellotime is not
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.13.7.4.1.29.2.1.1.9 |