HUAWEI-VOIP-MGCP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
74

hwMgcpParaTable

table
.1.3.6.1.4.1.2011.6.36.1.15 · 1 row entry · 7 columns
Open in standard view 
This table is used to set the MGCP dynamic parameters.
The index of this table is hwMgcpParaMgId.
hwMgcpParaEntry entry .1.3.6.1.4.1.2011.6.36.1.15.1
This table is used to set the MGCP dynamic parameters.
The index of this entry is hwMgcpParaMgId.
Indexes
hwMgcpParaMgId
Column Syntax OID
hwMgcpParaMgId
Indicates the MG ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.15.1.1
hwMgcpParaRetranIntervalTimer
Indicates the maximum re-transmission interval of MGCP messages.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.6.36.1.15.1.2
hwMgcpParaMaxRetranTimes
Indicates the maximum re-transmission times of MGCP messages.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.6.36.1.15.1.3
hwMgcpParaProvRspDelay
Indicates the delay of the MGCP stack timer for receiving the provisional responses.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.6.36.1.15.1.4
hwMgcpParaAtMostOnceTimer
Indicates the length of the At-most-once timer of the MGCP stack.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.2011.6.36.1.15.1.5
hwMgcpParaEnbProyRsp
Indicates whether the MGCP stack supports transmitting provisional responses.
Options:
1. no(1) - indicates that the MGCP stack not supports transmitting provisional responses
1. yes(2) - indicates that the MGCP stack s…
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.2011.6.36.1.15.1.6
hwMgcpParaEnbSdpTransParent
Indicates whether the MGCP stack supports partial transparent transmission of the Session Description Protocol (SDP).
Options:
1. no(1) - indicates that the MGCP stack not supports partial transparent transmission of th…
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.2011.6.36.1.15.1.7

hwMgcpMedGwyConfigTable

table
.1.3.6.1.4.1.2011.6.36.1.37 · 1 row entry · 24 columns
Open in standard view 
This table is used to config the MGCP media gateway.
The index of this table is hwMgcpMedGwyId.
hwMgcpMedGwyConfigEntry entry .1.3.6.1.4.1.2011.6.36.1.37.1
This table is used to config the MGCP media gateway.
The index of this entry is hwMgcpMedGwyId.
Indexes
hwMgcpMedGwyId
Column Syntax OID
hwMgcpMedGwyId
Media Gateway ID
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.37.1.1
hwMgcpMedGwyDomainName
Domain name Parameter 0: clears the value of the parameter
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.37.1.2
hwMgcpMedGwyDesc
Indicates the interface description.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.36.1.37.1.3
hwMgcpMedGwyIPAddress
Indicates the IP address that the Media Gateway Controller will use to communicate with the Media Gateway.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.37.1.4
hwMgcpMedGwyUDPPort
Indicates the UDP port that the Media Gateway Controller will use to communicate with the Media Gateway. The value 65535 is returned if the entry is invalid. The valid value is from 1 to 4999 in MD5500 and from 1 to 163…
Integer32r/w
Constraints:
range: 2000-3000
range: 65535-65535
 .1.3.6.1.4.1.2011.6.36.1.37.1.5
hwMgcpMedGwyCodeType
Indicates the coding type.
Options:
1.txt(1)-indicates that the coding type is text
Enumeration
Enumerated Values:
1txt
 .1.3.6.1.4.1.2011.6.36.1.37.1.6
hwMgcpMedGwyTransMode
Indicates the transmission mode.
Options:
1.udp(2)-indicates that the transmission mode is udp
Enumeration
Enumerated Values:
2udp
 .1.3.6.1.4.1.2011.6.36.1.37.1.7
hwMgcpMedGwyRegisterKey
Indicates the key that is registered with the MGC, and the length of valid key input is from 8 to 32. The key cannot be modified, read, or written by the operator without authority, so the hwMgcpMedGwyRegisterKey and hw…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.36.1.37.1.8
hwMgcpMedGwyOperKey
Indicates the key for operating the MG. The hwMgcpMedGwyOperKey cannot be read or written. The functions of this key are as follows: 1) The hwMgcpMedGwyRegisterKey and hwMgcpMedGwyOperKey must be provided for modifying …
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.36.1.37.1.9
hwMgcpMedGwyOperKeyNew
Indicates the new operation key, and the length of valid key input is from 8 to 32. The hwMgcpMedGwyOperKeyNew is a temporary variable, and cannot be read. If you query one hwMgcpMedGwyOperKeyNew not configured, the sys…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.36.1.37.1.10
hwMgcpMedGwyAdminStatus
Indicates the administrative status for this media gateway control group.
Options:
1.up(1)-indicates that the administrative status for this media gateway control group is up
2.down(2)-indicates that the administrative…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.6.36.1.37.1.11
hwMgcpMedGwyOperStatus
Indicates the current operational status of the signaling link.
Options:
1.up(1)-indicates that the current operational status of the signaling link is up
2.down(2)-indicates that the current operational status of the …
Enumeration
Enumerated Values:
1up
2down
3fault
4waitingAck
5unknown
6notStart
 .1.3.6.1.4.1.2011.6.36.1.37.1.12
hwMgcpMedGwyRowStatus
This is used to create new rows in this table, Modify existing rows, and to delete existing rows.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.36.1.37.1.13
hwMgcpMedGwyLastChange
Indicates the value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, t…
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.36.1.37.1.14
hwMgcpMedGwyAuthMode
Indicates the authentication mode.
Options:
1.hwmode(1)-indicates that the authentication mode is huawei mode
2.gbmode(2)-indicates that the authentication mode is global mode
Enumerationr/w
Enumerated Values:
1hwmode
2gbmode
 .1.3.6.1.4.1.2011.6.36.1.37.1.15
hwMgcpMedGwyAuthInitialKey
Indicates the authentication initial key, and the length of valid key input is from 1 to 16.
The size 0 means the parameter is not configured.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.36.1.37.1.16
hwMgcpMedGwyAuthMgId
Indicates the authentication MG ID and the length input is from 1 to 16.
The size 0 means the parameter is not configured.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.36.1.37.1.17
hwMgcpMedGwyAuthKey
Indicates the authentication initial key.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.6.36.1.37.1.18
hwMgcpMedGwy2833Encrypt
Indicates the 2833 encryption key and the length of valid key input is from 1 to 16.
The size 0 means the parameter is not configured.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.36.1.37.1.19
hwMgcpMedGwyCfgHeartBeatTimer
Indicates the configured timer of the heartbeat (s).
Integer32r/w
Constraints:
range: 5-655
 .1.3.6.1.4.1.2011.6.36.1.37.1.20
hwMgcpMedGwyIPAddrDhcpClientIndex
Dhcp Signal vlan id.
The valid value is 1..4093,if the value is -1, the static signal ip will be used.
Integer32r/w
Constraints:
range: -1--1
range: 1-4093
 .1.3.6.1.4.1.2011.6.36.1.37.1.21
hwMgcpMedGwyDynAddrName
Dynamic media gateway IP name.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.37.1.22
hwMgcpMedGwyCurDynAddrName
Current working dynamic media gateway IP name.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.37.1.23
hwMgcpMedGwyCurIPAddress
Indicates the IP address that the Media Gateway current use to communicate with the Media Gateway Controller.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.37.1.24

hwMgcpMedGwyCtrlTable

table
.1.3.6.1.4.1.2011.6.36.1.38 · 1 row entry · 10 columns
Open in standard view 
This table is used to config the MGCP media gateway control parameters.
The indexes of this table are hwMgcpMedGwyCtrlGatewayId and hwMgcpMedGwyCtrlIdx.
hwMgcpMedGwyCtrlEntry entry .1.3.6.1.4.1.2011.6.36.1.38.1
This table is used to config the MGCP media gateway control parameters.
The indexes of this entry are hwMgcpMedGwyCtrlGatewayId and hwMgcpMedGwyCtrlIdx.
Indexes
hwMgcpMedGwyCtrlGatewayId hwMgcpMedGwyCtrlIdx
Column Syntax OID
hwMgcpMedGwyCtrlGatewayId
Indicates the MG ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.38.1.1
hwMgcpMedGwyCtrlIdx
Indicates the MGC index.
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.2011.6.36.1.38.1.2
hwMgcpMedGwyCtrlIPAddress
Indicates the IP address of the Media Gateway Controller. The value 255.255.255.255 is returned if the entry is invalid.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.38.1.3
hwMgcpMedGwyCtrlDnsName
Indicates the DNS name of the MGC. - means clears the value of the parameter.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.38.1.4
hwMgcpMedGwyCtrlDnsIp
Indicates the IP address that is obtained through the MGC domain name.
DEFVAL { false }
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.38.1.5
hwMgcpMedGwyCtrlPort
Indicates the UDP port of the Media Gateway Controller. The value 65535 is returned if the entry is invalid.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.6.36.1.38.1.6
hwMgcpMedGwyCtrlAdminStatus
Indicates to set the MGC as the active MGC.
Options:
1. active(1) -Indicates to set the MGC as the active MGC
Enumerationr/w
Enumerated Values:
1active
 .1.3.6.1.4.1.2011.6.36.1.38.1.7
hwMgcpMedGwyCtrlOperStatus
Indicates the status of the Media Gateway Controller (and/or) its transportLink.
Options:
1. up(1) -indicates that the status of the Media Gateway Controller (and/or) its transportLink is up
2. down(2) -indicates that …
Enumeration
Enumerated Values:
1up
2down
3standby
 .1.3.6.1.4.1.2011.6.36.1.38.1.8
hwMgcpMedGwyCtrlRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.36.1.38.1.9
hwMgcpMedGwyCtrlLastChange
Indicates the value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, t…
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.36.1.38.1.10

hwMgcpDigitmapTable

table
.1.3.6.1.4.1.2011.6.36.1.39 · 1 row entry · 3 columns
Open in standard view 
This table is used to set digitmap.
The index of this table is hwMgcpDigitmapMgId.
hwMgcpDigitmapEntry entry .1.3.6.1.4.1.2011.6.36.1.39.1
This table is used to set digitmap.
The index of this entry is hwMgcpDigitmapMgId.
Indexes
hwMgcpDigitmapMgId
Column Syntax OID
hwMgcpDigitmapMgId
Indicates the MG interface ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.39.1.1
hwMgcpDigitmapDualdial
Indicates the automatic re-dial digitmap.
OctetStringr/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.2011.6.36.1.39.1.2
hwMgcpDigitmapOverLoadUrgent
Indicates the overload control digitmap.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.36.1.39.1.3

hwMgcpMgSoftParameterTable

table
.1.3.6.1.4.1.2011.6.36.1.40 · 1 row entry · 20 columns
Open in standard view 
This table is used to set the software parameters of MGCP media gateway.
The index of this table is hwMgcpMgInterfaceIndex.
hwMgcpMgSoftParameterEntry entry .1.3.6.1.4.1.2011.6.36.1.40.1
This table is used to set the software parameters of MGCP media gateway.
The index of this entry is hwMgcpMgInterfaceIndex.
Indexes
hwMgcpMgInterfaceIndex
Column Syntax OID
hwMgcpMgInterfaceIndex
Indicates the MG interface index.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.40.1.1
hwMgcpMgSoftParameter0 deprecated
Parameter name index 0. Indicates whether the terminal ID of the MG interface is layered.
Options:
1. yes(1) -indicates that the terminal ID of the MG interface is layered
2. no(2) -indicates that the terminal ID of th…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.2
hwMgcpMgSoftParameter1
Parameter name index 1. It indicates whether the ongoing calls are maintained after MG is disconnected from MGC.
Options:
1. yes(1) -indicates that the ongoing calls are maintained after MG is disconnected from MGC
2. …
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.3
hwMgcpMgSoftParameter2
Parameter name index 2. It indicates whether the MG interface supports dual homing.
Options:
1. yes(1) -indicates that the MG interface supports dual homing
2. no(2) -indicates that the MG interface not supports dual …
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.4
hwMgcpMgSoftParameter3
Parameter name index 3. It indicates whether the heartbeat message is disabled between MG and MGC.
Options:
1. yes(1) -indicates that the heartbeat message is enabled between MG and MGC
2. no(2) -indicates that the hea…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.5
hwMgcpMgSoftParameter4
Parameter name index 4. It indicates whether the wildcard is used in registration.
Options:
1. yes(1) -indicates that the wildcard is used in registration
2. no(2) -indicates that the wildcard is not used in registrat…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.6
hwMgcpMgSoftParameter5
Parameter name index 5. It indicates the MGC type. The value range is 1-9.
Options:
1. SOFTSWITCH
2. ZTE
3. NORTEL
4. CISCO
5. SIEMENS
6. SONUS
7. ETG
8. SHANGYANG
9. MARCONI
Default: 1
Integer32r/w
Constraints:
range: 1-9
 .1.3.6.1.4.1.2011.6.36.1.40.1.7
hwMgcpMgSoftParameter6
Parameter name index 6. It indicates the maximum threshold of not responding to the transmitted heartbeat message.
Default: 3
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.6.36.1.40.1.8
hwMgcpMgSoftParameter7
Parameter name index 7. It indicates whether to support the report that has the MG as the endpoint name.
Options:
1. yes(1) -indicates support the report that has the MG as the endpoint name
2. no(2) -indicates not su…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.9
hwMgcpMgSoftParameter8 deprecated
Parameter name index 8. It indicates whether the port fault and auto-block is reported to the MGC.
Options:
1. yes(1) -indicates that the port fault and auto-block is reported to the MGC
2. no(2) -indicates that the po…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.10
hwMgcpMgSoftParameter9 deprecated
Parameter name index 9. It is reserved in the system.
Options:
1. yes(1) -yes
2. no(2) -no
Default: yes(1)
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.11
hwMgcpMgSoftParameter10
Parameter name index 10. It indicates the point-to-point fault report flag.
Options:
1. yes(1) -indicates that the point-to-point fault is reported
2. no(2) -indicates that the port fault and auto-block is not reported…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.12
hwMgcpMgSoftParameter11
Parameter name index 11. It indicates the point-to-multipoint fault report flag.
Options:
1. yes(1) -indicates that the point-to-multipoint fault is reported
2. no(2) -indicates that the point-to-multipoint fault is no…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.13
hwMgcpMgSoftParameter12
Parameter name index 12. It indicates the local block tone type.
Options:
1. busyTone(1) -indicates that the local block tone type is busyTone
2. congestionTone(2) -indicates that the local block tone type is congesti…
Enumerationr/w
Enumerated Values:
1busyTone
2congestionTone
3muteTone
4userDefineTone1
5userDefineTone2
 .1.3.6.1.4.1.2011.6.36.1.40.1.14
hwMgcpMgSoftParameter13
Parameter name index 13. It indicates the remote block tone type.
Options:
1. busyTone(1) -indicates that the remote block tone type is busyTone
2. congestionTone(2) -indicates that the remote block tone type is cong…
Enumerationr/w
Enumerated Values:
1busyTone
2congestionTone
3muteTone
4userDefineTone1
5userDefineTone2
 .1.3.6.1.4.1.2011.6.36.1.40.1.15
hwMgcpMgSoftParameter14
Parameter name index 14. It indicates the RTP source port filtering switch.
Options:
1. filter(1) -indicates that the RTP source port is filter
2. notFilter(2) -indicates that the RTP source port is not filter
Default…
Enumerationr/w
Enumerated Values:
1filter
2notFilter
 .1.3.6.1.4.1.2011.6.36.1.40.1.16
hwMgcpMgSoftParameter15
Parameter name index 15. It indicates the length of howl tone<1,65535>.
Default:60
Unit: second
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.6.36.1.40.1.17
hwMgcpMgSoftParameter16
Parameter name index 16. Indicates whether the timer symbol (T) follows the number string reported by the signaling.
Options:
1. yes(1) -indicates that the timer symbol (T) follows the number string reported by the si…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.18
hwMgcpMgSoftParameter17
Parameter name index 17. It indicates the duration of the timer for preventing the repeated switching between the data service and voice service after auto-switching data transparent transmission is complete. <0,65534>…
Integer32r/w
Constraints:
range: 0-65534
 .1.3.6.1.4.1.2011.6.36.1.40.1.19
hwMgcpMgSoftParameter18
Parameter name index 18. Indicates whether to actively switch back to the voice service after data transparent transmission is complete.
Options:
1. yes(1) -indicates actively switch back to the voice service
2. no(…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.40.1.20

hwMgcpDmmParaTable

table
.1.3.6.1.4.1.2011.6.36.1.41 · 1 row entry · 2 columns
Open in standard view 
This table is used to set the digitmap parameters.
The index of this table is hwMgcpDmmParaMgId.
hwMgcpDmmParaEntry entry .1.3.6.1.4.1.2011.6.36.1.41.1
This table is used to set the digitmap parameters.
The index of this entry is hwMgcpDmmParaMgId.
Indexes
hwMgcpDmmParaMgId
Column Syntax OID
hwMgcpDmmParaMgId
Indicates the MG ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.41.1.1
hwMgcpDmmParaMgcpTTimer
Indicates the length of the DMM MGCP T timer.
Integer32r/w
Constraints:
range: 1-99
 .1.3.6.1.4.1.2011.6.36.1.41.1.2

hwMgcpTIDConfigTable

table
.1.3.6.1.4.1.2011.6.36.1.42 · 1 row entry · 8 columns
Open in standard view 
This table is used to config MGCP terminal ID.
The index of this table is hwMgcpTIDPrefixMgId.
hwMgcpTIDConfigEntry entry .1.3.6.1.4.1.2011.6.36.1.42.1
This table is used to config MGCP terminal ID.
The index of this entry is hwMgcpTIDPrefixMgId.
Indexes
hwMgcpTIDPrefixMgId
Column Syntax OID
hwMgcpTIDPrefixMgId
Media Gateway ID
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.42.1.1
hwMgcpBraPrefix
Indicates the BRA terminal prefix.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.36.1.42.1.2
hwMgcpPraPrefix
Indicates the PRA terminal prefix.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.36.1.42.1.3
hwMgcpPstnPrefix
Indicates the PSTN terminal prefix.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.36.1.42.1.4
hwMgcpBraTemplateIndex
Indicates the index of the BRA TID profile.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.36.1.42.1.5
hwMgcpPraTemplateIndex
Indicates the index of the PRA TID profile.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.36.1.42.1.6
hwMgcpPstnTemplateIndex
Indicates the index of the PSTN TID profile.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.36.1.42.1.7
hwMgcpIsNeedToConfigTID
Indicates whether the terminal ID needs to be configured for the subscriber. Bit0 (low) to bit31 (high) respectively represent PSTN, BRA, and PRA. The remaining bits are reserved. (It is unavailable in the R17.)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.42.1.8