hwMgcpMgSoftParameter5
HUAWEI-VOIP-MGCP-MIB ·
.1.3.6.1.4.1.2011.6.36.1.40.1.7
Object
column
r/w
Integer32
Parameter name index 5. It indicates the MGC type. The value range is 1-9. Options: 1. SOFTSWITCH 2. ZTE 3. NORTEL 4. CISCO 5. SIEMENS 6. SONUS 7. ETG 8. SHANGYANG 9. MARCONI Default: 1
Context
- MIB
- HUAWEI-VOIP-MGCP-MIB
- OID
.1.3.6.1.4.1.2011.6.36.1.40.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwMgcpMgSoftParameterEntry
- Table
- hwMgcpMgSoftParameterTable
- Siblings
- 19
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-9
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMgcpMgInterfaceIndex Indicates the MG interface index. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.40.1.1 |
| hwMgcpMgSoftParameter8 deprecated Parameter name index 8. It indicates whether the port fault and auto-block is reported to the MGC.
Options:
1. yes(1) -indicates that the port fault and auto-block is reported to… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.10 |
| hwMgcpMgSoftParameter9 deprecated Parameter name index 9. It is reserved in the system.
Options:
1. yes(1) -yes
2. no(2) -no
Default: yes(1) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.11 |
| hwMgcpMgSoftParameter10 Parameter name index 10. It indicates the point-to-point fault report flag.
Options:
1. yes(1) -indicates that the point-to-point fault is reported
2. no(2) -indicates that the p… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.12 |
| hwMgcpMgSoftParameter11 Parameter name index 11. It indicates the point-to-multipoint fault report flag.
Options:
1. yes(1) -indicates that the point-to-multipoint fault is reported
2. no(2) -indicates … | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.13 |
| hwMgcpMgSoftParameter12 Parameter name index 12. It indicates the local block tone type.
Options:
1. busyTone(1) -indicates that the local block tone type is busyTone
2. congestionTone(2) -indicates th… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.14 |
| hwMgcpMgSoftParameter13 Parameter name index 13. It indicates the remote block tone type.
Options:
1. busyTone(1) -indicates that the remote block tone type is busyTone
2. congestionTone(2) -indicates… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.15 |
| hwMgcpMgSoftParameter14 Parameter name index 14. It indicates the RTP source port filtering switch.
Options:
1. filter(1) -indicates that the RTP source port is filter
2. notFilter(2) -indicates that t… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.16 |
| hwMgcpMgSoftParameter15 Parameter name index 15. It indicates the length of howl tone<1,65535>.
Default:60
Unit: second | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.40.1.17 |
| hwMgcpMgSoftParameter16 Parameter name index 16. Indicates whether the timer symbol (T) follows the number string reported by the signaling.
Options:
1. yes(1) -indicates that the timer symbol (T) foll… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.18 |
| hwMgcpMgSoftParameter17 Parameter name index 17. It indicates the duration of the timer for preventing the repeated switching between the data service and voice service after auto-switching data transpa… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.40.1.19 |
| hwMgcpMgSoftParameter0 deprecated Parameter name index 0. Indicates whether the terminal ID of the MG interface is layered.
Options:
1. yes(1) -indicates that the terminal ID of the MG interface is layered
2. no(… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.2 |
| hwMgcpMgSoftParameter18 Parameter name index 18. Indicates whether to actively switch back to the voice service after data transparent transmission is complete.
Options:
1. yes(1) -indicates actively… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.20 |
| hwMgcpMgSoftParameter1 Parameter name index 1. It indicates whether the ongoing calls are maintained after MG is disconnected from MGC.
Options:
1. yes(1) -indicates that the ongoing calls are maintain… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.3 |
| hwMgcpMgSoftParameter2 Parameter name index 2. It indicates whether the MG interface supports dual homing.
Options:
1. yes(1) -indicates that the MG interface supports dual homing
2. no(2) -indicates … | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.4 |
| hwMgcpMgSoftParameter3 Parameter name index 3. It indicates whether the heartbeat message is disabled between MG and MGC.
Options:
1. yes(1) -indicates that the heartbeat message is enabled between MG … | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.5 |
| hwMgcpMgSoftParameter4 Parameter name index 4. It indicates whether the wildcard is used in registration.
Options:
1. yes(1) -indicates that the wildcard is used in registration
2. no(2) -indicates th… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.6 |
| hwMgcpMgSoftParameter6 Parameter name index 6. It indicates the maximum threshold of not responding to the transmitted heartbeat message.
Default: 3 | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.40.1.8 |
| hwMgcpMgSoftParameter7 Parameter name index 7. It indicates whether to support the report that has the MG as the endpoint name.
Options:
1. yes(1) -indicates support the report that has the MG as the … | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.40.1.9 |