HUAWEI-VOICEUSER-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
18
Rows
18
Columns
245
hwPstnCTPConfigTable
table.1.3.6.1.4.1.2011.6.112.1.1
·
1 row entry
·
30 columns
This table is used to add, delete, modify, and query the PSTN user. The index of this table is hwPstnCTPConfigIndex. The service attributes of a PSTN port include the gateway ID, terminal ID, telephone number, whether to support layering configuration, priority flag of the port for the overload control, user type, power-off interval, FSK delay interval, time for issuing the calling number, format for issuing the calling number, and limited pulse dialing. Through the table, you can configure, modify, and query the above-mentioned attributes of the PSTN user.
This table is used to add, delete, modify, and query the PSTN user.
The index of this entry is hwPstnCTPConfigIndex.
The service attributes of a PSTN port include the gateway ID, terminal ID, telephone number, whether…
The index of this entry is hwPstnCTPConfigIndex.
The service attributes of a PSTN port include the gateway ID, terminal ID, telephone number, whether…
Indexes
hwPstnCTPConfigIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwPstnCTPConfigIndex
Indicates the frame/slot/port.
24 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the typ… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.1.1.1 |
||||||||||||
|
hwPstnCTPMgId
Indicates the MG ID.
|
Integer32r/w Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.112.1.1.1.2 |
||||||||||||
|
hwPstnCTPTerminationID
Indicates the terminal ID (only the character string of digit type is supported).
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.1.1.3 |
||||||||||||
|
hwPstnCTPTelNo
Indicates the telephone number.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.1.1.4 |
||||||||||||
|
hwPstnCTPRowStatus
Indicates the row status.The operations include activate, shut down, not start, create and register, create and wait, and delete. The operations are not used in the V8R61.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.5 |
||||||||||||
|
hwPstnCTPLayerFlag
Indicates whether to layer.
Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.6 |
||||||||||||
|
hwPstnCTPPriorityFlag
Indicates the priority of the terminal.
Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.7 |
||||||||||||
|
hwPstnCTPPotsLineType
Indicates the subscriber type.
Options: 1. del(1) -DEL 2. lcPBX(2) -Loop Calling PBX 3. ecPBX(3) -earth calling PBX 4. payPhone(4) -PayPhone |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.8 |
||||||||||||
|
hwPstnCTPDCTime
Indicates the disconnect clear interval.
Unit: 10ms |
Integer32r/w Constraints: range: 10-100 |
.1.3.6.1.4.1.2011.6.112.1.1.1.9 |
||||||||||||
|
hwPstnCTPFSKDelayInterval
Indicates the FSK delay interval.
Unit: 10ms |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.2011.6.112.1.1.1.10 |
||||||||||||
|
hwPstnCTPCidTransWhen
Indicates the time for delivering the caller ID.
Options: 1. afterRing(1) -transmit CID after ringing 2. beforeRing(2) -transmit CID before ringing |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.11 |
||||||||||||
|
hwPstnCTPCidFormat
Indicates the format of the caller ID.
Options: 1. sdmfFsk(1) -SDMF FSK format 2. mdmfFsk(2) -MDMF FSK format 3. dtmf(3) -DTMF format 4. russia(4) -russia format 5. etsi(5) -etsi format |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.12 |
||||||||||||
|
hwPstnCTPVQEAgc
Indicates enable AGC or not.
Options: 1. enable(1) -enable AGC 2. disable(2) -disable AGC |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.13 |
||||||||||||
|
hwPstnCTPVQESns
Indicates enable SNS or not.
Options: 1. enable(1) -enable SNS 2. disable(2) -disable SNS |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.14 |
||||||||||||
|
hwPstnCTPVQEAgcLevel
Indicates set AGC target value.
Unit: dbm0 |
Integer32r/w Constraints: range: -24--9 |
.1.3.6.1.4.1.2011.6.112.1.1.1.15 |
||||||||||||
|
hwPstnCTPVQESnsLevel
Indicates set VQE noise suppression level.
Unit: db |
Integer32r/w Constraints: range: 6-20 |
.1.3.6.1.4.1.2011.6.112.1.1.1.16 |
||||||||||||
|
hwPstnCTPDspInputGain
Dsp input gain.
1: -10db 2: -9db 3: -8db 4: -7db 5: -6db 6: -5db 7: -4db 8: -3db 9: -2db 10: -1db 11: 0db 12: 1db 13: 2db 14: 3db 15: 4db 16: 5db Unit: db |
Integer32r/w Constraints: range: 1-16 |
.1.3.6.1.4.1.2011.6.112.1.1.1.17 |
||||||||||||
|
hwPstnCTPDspOutputGain
Dsp output gain.
1: -10db 2: -9db 3: -8db 4: -7db 5: -6db 6: -5db 7: -4db 8: -3db 9: -2db 10: -1db 11: 0db 12: 1db 13: 2db 14: 3db 15: 4db 16: 5db 17: 6db 18: 7db 19:… |
Integer32r/w Constraints: range: 1-21 |
.1.3.6.1.4.1.2011.6.112.1.1.1.18 |
||||||||||||
|
hwPstnCTPDetectANSbarBySingleToneFlag
It indicates whether the ANSbar signal detected by SingleTone is supported.
Options: 1. enable(1) -the ANSbar signal detected by SingleTone is supported 2. disable(2) -the ANSbar signal detected by SingleTone is not su… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.19 |
||||||||||||
|
hwPstnCTPBellANSFlag
It indicates whether the Bell ANS is supported.
Options: 1. enable(1) -the Bell ANS is supported 2. disable(2) -the Bell ANS is not supported |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.20 |
||||||||||||
|
hwPstnCTPDspParaTemplate
The index of dsp parameter template name.
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.2011.6.112.1.1.1.21 |
||||||||||||
|
hwPstnCTPCidFskMode
It indicates the mode of fsk.
Options: 1. bell202(1) -bell 202 2. ccittv23(2) -ccitt v23 3. ntt(3) -ntt |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.22 |
||||||||||||
|
hwPstnCTPCidTasPattern
It indicates the mode of tas.
Options: 1. noTas(1) -no tas 2. dtAs(2) -DT as |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.23 |
||||||||||||
|
hwPstnCTPUserGroupid
It indicates the user group ID.
-1 indicates clear the user group info. |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.2011.6.112.1.1.1.24 |
||||||||||||
|
hwPstnCTPDigitMapGroupName
It indicates the digitmap group name.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.1.1.25 |
||||||||||||
|
hwPstnCTPForceSendFsk
Indicates enable force send FSK or not.
Options: 1. enable(1) -enable force send FSK 2. disable(2) -disable force send FSK |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.26 |
||||||||||||
|
hwPstnCTPFSKAlertInterval
It indicates fskend to alert Interval.
-1 indicate invalid value. Unit: 10ms |
Integer32r/w Constraints: range: -1-100 |
.1.3.6.1.4.1.2011.6.112.1.1.1.27 |
||||||||||||
|
hwPstnCTPConfigDefaultCli
It indicates the default cli number of outgoing call.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.1.1.28 |
||||||||||||
|
hwPstnCTPEOCTime
Indicates the end of call interval.
Unit: 10ms |
Integer32r/w Constraints: range: 10-100 |
.1.3.6.1.4.1.2011.6.112.1.1.1.29 |
||||||||||||
|
hwPstnCTPRemoteBlockPowerDeny
Indicates the flag of remote block power deny.
Options: 1. enable(1) - enable remote block power deny 2. disable(2) - disable remote block power deny |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.1.1.30 |
hwPstnCTPOperTable
table.1.3.6.1.4.1.2011.6.112.1.2
·
1 row entry
·
11 columns
It is used to maintain PSTN ports with the VSP feature. The index of this table is hwPstnCTPOperIndex. Through the table, you can query the states of PSTN ports, including the running status of the PSTN service, management status of the PSTN service, change time of the running status of the PSTN service, and change time of the management status of the PSTN service. Through the table, services on the PSTN port can be terminated, started, and the service status can be queried.
It is used to maintain PSTN ports with the VSP feature.
The index of this entry is hwPstnCTPOperIndex.
Through the table, you can query the states of PSTN ports, including the running status of the PSTN service, manage…
The index of this entry is hwPstnCTPOperIndex.
Through the table, you can query the states of PSTN ports, including the running status of the PSTN service, manage…
Indexes
hwPstnCTPOperIndex
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwPstnCTPOperIndex
Indicates the frame/slot/port.
24 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the typ… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.2.1.1 |
||||||||||||||||||||||||
|
hwPstnCTPSrvState
Indicates the running status of the service layer of the PSTN port.
Options: 1. fault(1)-the port is fault 2. idle(2) -the user is idle 3. offHook(3) -the user off-hook 4. lock(4) -the user is locked 5. ring(5) -the us… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.2.1.2 |
||||||||||||||||||||||||
|
hwPstnCTPAdminState
Indicates the administration status of the service layer of the PSTN port.
Options: 1. blockedLocally(1) -the service is blocked cause of the local reason 2. blockedRemotely(2) -the service is blocked cause of the remo… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.2.1.3 |
||||||||||||||||||||||||
|
hwPstnCTPAdminOper
Indicates the maintenance operation of the service layer of the PSTN port.
Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.2.1.4 |
||||||||||||||||||||||||
|
hwPstnCTPSrvStateChange
Indicates the service running status changing time of the PSTN port.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.6.112.1.2.1.5 |
||||||||||||||||||||||||
|
hwPstnCTPAdminStateChange
Indicates the service administration status changing time of the PSTN port.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.6.112.1.2.1.6 |
||||||||||||||||||||||||
|
hwPstnCTPMaxCobTime
Length of waiting timer for pstn user defer end service.
0 is not allowed to set. Default: 240 Unit: minute |
Integer32r/w Constraints: range: 0-1440 |
.1.3.6.1.4.1.2011.6.112.1.2.1.7 |
||||||||||||||||||||||||
|
hwPstnCTPOnexpire
Indicates disposal mode when pstn user defer end service timeout.
Options: 1. force(1) -force user to end service when end-service timeout 2. cancel(2) -cancel end service when end-service timeout Default: force(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.2.1.8 |
||||||||||||||||||||||||
|
hwPstnCTPRegState
Indicates the register status of the PSTN port.
Options: 1.initializing(1) - the user has not send register request 2.registering(2) - the user has send register request and is waiting for response 3.failRegistered(… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.2.1.9 |
||||||||||||||||||||||||
|
hwPstnCTPCallState
Indicates the register status of the PSTN port.
Options: 1. idle(1)- there is no call on the user 2. offhook(2)- the user hung up 3. dialing(3)- the user is dialing 4.establishing(4)- the call is establishing 5.ringi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.2.1.10 |
||||||||||||||||||||||||
|
hwPstnCTPCallWaitState
Indicates the register status of the PSTN port.
Options: 1. disable(1)- the service is disable 2. idle(2)- the is no callwaiting services 3. secondaryRinging(3)- the second part is ringing 4. secondaryConnecting(4)- … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.2.1.11 |
.1.3.6.1.4.1.2011.6.112.1.3
·
1 row entry
·
12 columns
This table is used to query the statistics of the MG service ports. The index of this table is hwMgPortStatInfoIndex.
This table is used to query the statistics of the MG service ports.
The index of this entry is hwMgPortStatInfoIndex.
The index of this entry is hwMgPortStatInfoIndex.
Indexes
hwMgPortStatInfoIndex
| Column | Syntax | OID |
|---|---|---|
|
hwMgPortStatInfoIndex
Indicates the frame ID.
The GetNext (walk) operation is to collect the statistics of each specified shelf of the system. In the Get operation, if hwMgPortStatIndex is all F, the operation is to collect the statistics of… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.1 |
|
hwPstnCTPStatTotalNum
Indicates the total number of the MGPSTN service ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.2 |
|
hwPstnCTPStatFaultNum
Indicates the number of the MGPSTN faulty ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.3 |
|
hwPstnCTPStatIdleNum
Indicates the number of the MGPSTN idle ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.4 |
|
hwPstnCTPStatOffhookNum
Indicates the number of the MGPSTN off-hooked ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.5 |
|
hwPstnCTPStatParkingNum
Indicates the number of the MGPSTN locked ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.6 |
|
hwPstnCTPStatRingNum
Indicates the number of the MGPSTN ringing ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.7 |
|
hwMgPortStatInfoTotalNum
Indicates the total number of the MG service ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.8 |
|
hwMgPortStatInfoUseableNum
Indicates the number of the MG idle ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.9 |
|
hwMgPortStatInfoBusyNum
Indicates the number of the MG busy ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.10 |
|
hwMgPortStatInfoFaultNum
Indicates the number of the MG faulty ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.11 |
|
hwMgPortStatInfoForbiddenNum
Indicates the number of the MG blocked ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.3.1.12 |
hwBraCTPConfigTable
table.1.3.6.1.4.1.2011.6.112.1.4
·
1 row entry
·
25 columns
It is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature. The index of this table is hwBraCTPConfigIndex. The attributes of an ISDN user with the VoIP feature include the gateway ID, terminal ID, IUA link group, interface ID, and telephone number. Through the table, you can configure, modify, and query the above-mentioned attributes of the BRA user.
It is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature.
The index of this entry is hwBraCTPConfigIndex.
The attributes of an ISDN …
The index of this entry is hwBraCTPConfigIndex.
The attributes of an ISDN …
Indexes
hwBraCTPConfigIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwBraCTPConfigIndex
Indicates the frame/slot/port.
25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the ty… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.4.1.1 |
||||||||||||
|
hwBraCTPMgId
Indicates the MG ID.
|
Integer32r/w Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.112.1.4.1.2 |
||||||||||||
|
hwBraCTPTerminationID
Indicates the start terminal ID (only the character string of digit type is supported).
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.4.1.3 |
||||||||||||
|
hwBraCTPTelNo
Indicates the BRA telephone number.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.4.1.4 |
||||||||||||
|
hwBraCTPLinkSetNo
Indicates the link set to which the BRA terminal belongs (the value range depends on the product specifications).
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.4.1.5 |
||||||||||||
|
hwBraCTPIuaIID
Indicates the interface ID of the BRA terminal.
-1 means this parameter is not used. |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.2011.6.112.1.4.1.6 |
||||||||||||
|
hwBraCTPRowStatus
Indicates the row status.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.112.1.4.1.7 |
||||||||||||
|
hwBraCTPPriorityFlag
Indicates the priority of the terminal.
Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority Default: cat3(3) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.4.1.8 |
||||||||||||
|
hwBraCTPLayerFlag
Indicates whether to layer.
Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.4.1.9 |
||||||||||||
|
hwBraCTPUniErrReport
UNI fault report flag of bra user.
Options: 1. disable(1) -disable 2. enable(2) -enable Default: disable(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.4.1.10 |
||||||||||||
|
hwBraCTPAutoResumeLimit
Indicates auto resume times threshold of bra user.
Default: 20 |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.6.112.1.4.1.11 |
||||||||||||
|
hwBraCTPIuaTextIID
Use the text to indicate the interface ID of the BRA terminal. Config area 0~65535. Display area 0~53.
|
OctetStringr/w Constraints: range: 0-53 |
.1.3.6.1.4.1.2011.6.112.1.4.1.12 |
||||||||||||
|
hwBraCTPPowerDialerSupport
Powerdialer support flag of bra user.
Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.4.1.13 |
||||||||||||
|
hwBraCTPUserGroupid
It indicates the user group ID.
-1 indicates clear the user group info. |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.2011.6.112.1.4.1.14 |
||||||||||||
|
hwBraCTPDigitMapGroupName
It indicates the digitmap group name.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.4.1.15 |
||||||||||||
|
hwBraCTPConfigIncomingcallChangeName
It indicates the number change of incomging call name.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.4.1.16 |
||||||||||||
|
hwBraCTPConfigOutgoingcallChangeName
It indicates the number change of outgoing call name.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.4.1.17 |
||||||||||||
|
hwBraCTPConfigDefaultCli
It indicates the default cli number of outgoing call.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.4.1.18 |
||||||||||||
|
hwBraCTPConfigDefaultCliMode
Indicates the mode of cli number.
Options: 1. match(1) - match 2. overwrite(2) -overwrite 3. null(-1) -invalid value Default: match(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.4.1.19 |
||||||||||||
|
hwBraCTPConfigBearCapability
Indicates the bearCapability of bra user.
Options: 1. speech(1) -speech 2. audio(2) -3.1k-audio 3. speechOraudio(3) -speech or 3.1k-audio 4. null(-1) -invalid value Default: speechOraudio(3) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.4.1.20 |
||||||||||||
|
hwBraCTPConfigCalledPartyNumType
Indicates the type of called party number.
Options: 1. unknown(1) -unknown 2. national(2) -national 3. auto(3) -auto 4. international(4) -international 5. subscriber(5) -subscriber 6. null(-1) -invalid val… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.4.1.21 |
||||||||||||
|
hwBraCTPConfigCalledPartyNumInternationalPrefixFlag
Indicates whether to add prefix on international number.
Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(-1) -invalid value Default: disable(2) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.4.1.22 |
||||||||||||
|
hwBraCTPConfigCalledPartyNumNationalPrefixFlag
Indicates whether to add prefix on national number.
Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(-1) -invalid value Default: disable(2) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.4.1.23 |
||||||||||||
|
hwBraCTPDspParaTemplate
Indicates the name of DSP parameter template.
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.2011.6.112.1.4.1.24 |
||||||||||||
|
hwBraCTPConfigCliGroup
It indicates the cli-group name of outgoing call.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.4.1.25 |
hwBraCTPOperTable
table.1.3.6.1.4.1.2011.6.112.1.5
·
1 row entry
·
15 columns
It is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP feature. The index of this table is hwBraCTPOperIndex. Different from the MG PSTN port, a BRA port contains two B channels and occupies two terminal IDs; however, only one terminal ID needs to be configured and this ID must be an even number. Then, the terminal ID in odd is allocated to the BRA port by default. Through this table, you can query the running status of the BRA B1/B2 service, management status of the BRA B1/B2 service, status of the BRA D channel, change time of the running status of the BRA B1/B2 service, and change time of the management status of the BRA B1/B2 service. Through the table, services on the BRA port can be terminated, started, and the service status can be queried.
It is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP feature.
The index of this entry is hwBraCTPOperIndex.
Diffe…
The index of this entry is hwBraCTPOperIndex.
Diffe…
Indexes
hwBraCTPOperIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwBraCTPOperIndex
Indicates the frame/slot/port.
25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the ty… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.5.1.1 |
||||||||||
|
hwBraCTPB1SrvState
Indicates the running status of the service layer of the BRA B1 channel.
Options: 1. idle(1) -the user is idle 2. busy(2) -the user is busy 3. fault(3) -the port is fault |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.5.1.2 |
||||||||||
|
hwBraCTPB2SrvState
Indicates the running status of the service layer of the BRA B2 channel.
Options: 1. idle(1) -the user is idle 2. busy(2) -the user is busy 3. fault(3) -the port is fault |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.5.1.3 |
||||||||||
|
hwBraCTPB1AdminState
Indicates the administration status of the service layer of the BRA B1 channel.
Options: 1. blockedLocally(1) -the service is blocked cause of local reason 2. blockedRemotely(2) -the service is blocked cause of remote r… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.5.1.4 |
||||||||||
|
hwBraCTPB2AdminState
Indicates the administration status of the service layer of the BRA B2 channel.
Options: 1. blockedLocally(1) -the service is blocked cause of local reason 2. blockedRemotely(2) -the service is blocked cause of remote r… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.5.1.5 |
||||||||||
|
hwBraCTPAdminOper
Indicates the maintenance operation of the service layer of the BRA port.
Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.5.1.6 |
||||||||||
|
hwBraCTPDState
Indicates the status of the BRA D channel.
Options: 1. established(1) -established 2. block(2) -blocked 3. notConstruct(3) -unestablished 4. teiAlloced(4) -TEI is alloced 5. teiNotAlloced(5) -TEI is not alloced |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.5.1.7 |
||||||||||
|
hwBraCTPB1SrvStateChange
Indicates the service running status changing time of the BRA B1 channel.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.6.112.1.5.1.8 |
||||||||||
|
hwBraCTPB2SrvStateChange
Indicates the service running status changing time of the BRA B2 channel.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.6.112.1.5.1.9 |
||||||||||
|
hwBraCTPB1AdminStateChange
Indicates the service administration status changing time of the BRA B1 channel.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.6.112.1.5.1.10 |
||||||||||
|
hwBraCTPB2AdminStateChange
Indicates the service administration status changing time of the BRA B2 channel.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.6.112.1.5.1.11 |
||||||||||
|
hwBraCTPDStateChange
Indicates the status changing time of the BRA D channel.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.6.112.1.5.1.12 |
||||||||||
|
hwBraCTPMaxCobTime
Indicates the length of waiting timer for bra user defer end service. 0 is not allowed to set.
Default:240 Unit: minute |
Integer32r/w Constraints: range: 0-1440 |
.1.3.6.1.4.1.2011.6.112.1.5.1.13 |
||||||||||
|
hwBraCTPOnexpire
Indicates the disposal mode when bra user defer end service timeout.
Options: 1. force(1) -force user to end service 2. cancel(2) -cancel user's end service Default: force(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.5.1.14 |
||||||||||
|
hwBraCTPAutoResumeTimes
Indicates the auto resume times of bra user.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.6.112.1.5.1.15 |
hwBraCTPStatisticsTable
table.1.3.6.1.4.1.2011.6.112.1.6
·
1 row entry
·
5 columns
This table is used to query the statistics of the MG-BRA service ports. The index of this table is hwBraCTPStatIndex.
This table is used to query the statistics of the MG-BRA service ports.
The index of this entry is hwBraCTPStatIndex.
The index of this entry is hwBraCTPStatIndex.
Indexes
hwBraCTPStatIndex
| Column | Syntax | OID |
|---|---|---|
|
hwBraCTPStatIndex
Indicates the frame ID.
The GetNext (walk) operation is to collect the statistics of each specified shelf of the system. In the Get operation, if hwMgPortStatIndex is all F, the operation is to collect the statistics of… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.6.1.1 |
|
hwBraCTPStatTotalNum
Indicates the total number of the MGBRA service ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.6.1.2 |
|
hwBraCTPStatFaultNum
Indicates the number of faulty ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.6.1.3 |
|
hwBraCTPStatIdleNum
Indicates the number of idle ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.6.1.4 |
|
hwBraCTPStatBusyNum
Indicates the number of busy ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.6.1.5 |
hwPraCTPConfigTable
table.1.3.6.1.4.1.2011.6.112.1.7
·
1 row entry
·
26 columns
It is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature. The index of this table is the hwPraCTPConfigIndex. The attributes of a PRA user with the VoIP feature include the gateway ID, start terminal ID, IUA link group, and interface ID. Through the table, you can configure, modify, and query the above-mentioned attributes of the PRA user.
It is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature.
The index of this entry is the hwPraCTPConfigIndex.
The attributes of a PRA …
The index of this entry is the hwPraCTPConfigIndex.
The attributes of a PRA …
Indexes
hwPraCTPConfigIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwPraCTPConfigIndex
Indicates the frame/slot/port.
22 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the ty… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.7.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPMgId
Indicates the MG ID.
|
Integer32r/w Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.112.1.7.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPTerminationID
Indicates the start terminal ID (only the character string of digit type is supported).
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.7.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPLinkSetNo
Indicates the link set to which the PRA terminal belongs (the value range depends on the product specifications).
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.7.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPIuaIID
Indicates the interface ID of the PRA terminal.
-1 means this parameter is not used. |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.2011.6.112.1.7.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPRowStatus
Indicates the row status.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.112.1.7.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPLayerFlag
Indicates whether to layer.
Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.7.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPPriorityFlag
Indicates terminal priority.
Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority Default: cat3(3) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.7.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPUniErrReport
Indicates UNI fault report flag of e1 port.
Options: 1. disable(1) -disable UNI fault report of e1 port 2. enable(2) -enable UNI fault report of e1 port Default: disable(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.7.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPSubChnMask
Indicates from left to right, each bit indicates enable one sub channel(0-31) or not, 0 means disable, 1 means enable, sub channel 0 and 16 must enable.
Default: 11111111111111111111111111111111 |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.7.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPTelNo
Indicates telphone number.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.7.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPAutoResumeLimit
Indicates auto resume times threshold of pra user.
Default: 20 |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.6.112.1.7.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPIuaTextIID
Use the text to indicate the interface ID of the PRA terminal.
|
OctetStringr/w Constraints: range: 0-53 |
.1.3.6.1.4.1.2011.6.112.1.7.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPPowerDialerSupport
Powerdialer support flag of pra user.
Options: 1. enable(1) -support power dialer 2. disable(2) -not support power dialer Default: enable(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.7.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPUserGroupid
It indicates the user group ID.
-1 indicates clear the user group info. |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.2011.6.112.1.7.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPDigitMapGroupName
It indicates the digitmap group name.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.7.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPConfigIncomingcallChangeName
It indicates the number change name of incoming call.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.7.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPConfigOutgoingcallChangeName
It indicates the number change name of outgoing call.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.7.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPConfigDefaultCli
It indicates the default cli number of outgoing call.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.7.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPConfigDefaultCliMode
Indicates the mode of cli number.
Options: 1. match(1) -match 2. overwrite(2) -overwrite 3. null(0) -invalid value Default: match(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.7.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPConfigBearCapability
Indicates the bearCapability of pra user.
Options: 1. speech(1) -speech 2. audio(2) -3.1k-audio 3. speechOraudio(3) -speech or 3.1k-audio 4. null(0) -invalid value Default: speech… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.7.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPConfigCalledPartyNumType
Indicates the type of called party number.
Options: 1. unknown(1) -unknown 2. national(2) -national 3. auto(3) -auto 4. international(4) -international 5. subscriber(5) -subscriber 6. nul… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.7.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPConfigCalledPartyNumInternationalPrefixFlag
Indicates whether to add prefix on international number.
Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(0) -invalid value Default: disable(2) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.7.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPConfigCalledPartyNumNationalPrefixFlag
Indicates whether to add prefix on national number.
Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(0) -invalid value Default: disable(2) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.7.1.24 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPConfigCliGroup
It indicates the cli-group name of outgoing call.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.7.1.25 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPraCTPBChnCallRight
Indicates the B channel's incoming and outgoing call permissions.
Indicates the permissions of B channels 0-31 from left to right. Meaning of a single byte: 0: indicates that the B channel does not have the outgoing… |
OctetStringr/w Constraints: range: 32-32 |
.1.3.6.1.4.1.2011.6.112.1.7.1.26 |
hwPraCTPOperTable
table.1.3.6.1.4.1.2011.6.112.1.8
·
1 row entry
·
8 columns
It is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP feature. The index of this table is hwPraCTPOperIndex. Through this table, you can query the running status of 32 B channels of the PRA service, management status of 32 B channels of the PRA service, and status of the PRA D channel. Through the table, services on the PRA port can be terminated, started, and the service status can be queried.
It is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP feature.
The index of this entry is hwPraCTPOperIndex.
Through…
The index of this entry is hwPraCTPOperIndex.
Through…
Indexes
hwPraCTPOperIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hwPraCTPOperIndex
Indicates the frame/slot/port.
22 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the ty… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.8.1.1 |
||||||
|
hwPraCTPBchnSrvState
Indicates the running status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character is as follows: 1-Idle; 2-Busy; 3-Faulty; 4-Unavailable.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.8.1.2 |
||||||
|
hwPraCTPBchnAdminState
Indicates the administration status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character is as follows: 1-blocked-locally; 2-blocked-remotely; 3-in-s…
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.8.1.3 |
||||||
|
hwPraCTPAdminOper
Indicates the service operation.
Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.8.1.4 |
||||||
|
hwPraCTPDState
Indicates the status of the PRA D channel.
Options: 1. established(1) -established 2. block(2) -blocked 3. notConstruct(3) -unestablished |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.8.1.5 |
||||||
|
hwPraCTPMaxCobTime
Indicates length of waiting timer for pra user defer end service.
0 is not allowed to set. Default: 240 Unit: minute |
Integer32r/w Constraints: range: 0-1440 |
.1.3.6.1.4.1.2011.6.112.1.8.1.6 |
||||||
|
hwPraCTPOnexpire
Indicates disposal mode when pra user defer end service timeout.
Options: 1. force(1) -force end service 2. cancel(2) -cancel end service Default: force(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.8.1.7 |
||||||
|
hwPraCTPAutoResumeTimes
Indicates auto resume times of pra user.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.6.112.1.8.1.8 |
.1.3.6.1.4.1.2011.6.112.1.9
·
1 row entry
·
3 columns
It is used to trace port status. The index of this table is hwPortStateTraceFrameId. This table traces states of the MG PSTN ports and MG BRA ports in real time, which contains trace start, trace end, and handshake operations.
It is used to trace port status.
The index of this entry is hwPortStateTraceFrameId.
This table traces states of the MG PSTN ports and MG BRA ports in real time, which contains trace start, trace end, and handshake op…
The index of this entry is hwPortStateTraceFrameId.
This table traces states of the MG PSTN ports and MG BRA ports in real time, which contains trace start, trace end, and handshake op…
Indexes
hwPortStateTraceOperFrameId
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hwPortStateTraceOperFrameId
Indicates the frame ID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.9.1.1 |
||||||
|
hwPortStateTraceOperType
Indicates the operation type.
Options: 1. stop(1) -stop tracing 2. start(2) -start tracing 3. handshake(3) -handshake |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.9.1.2 |
||||||
|
hwPortStateTraceOperReportType
Indicates the report type (adopting the bit table):
Bit0: indicates to report the running status change of the physical layer. Bit1: indicates to report the administration status change of the physical layer. Bit2: indi… |
Integer32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.2011.6.112.1.9.1.3 |
hwPmbsCTPConfigTable
table.1.3.6.1.4.1.2011.6.112.1.11
·
1 row entry
·
5 columns
This table is used to config PMBS user. The index of this table is hwPmbsCTPConfigIndex.
This table is used to config PMBS user.
The index of this entry is hwPmbsCTPConfigIndex.
The index of this entry is hwPmbsCTPConfigIndex.
Indexes
hwPmbsCTPConfigIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwPmbsCTPConfigIndex
Indicates the frame/slot/port.
The PMBS user must be configurated on BRA port. 25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.11.1.1 |
||||||||||||
|
hwPmbsCTPLinkSetNo
IUA LinkSetNo.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.11.1.2 |
||||||||||||
|
hwPmbsCTPluaIID
IUA Interface ID.
|
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.2011.6.112.1.11.1.3 |
||||||||||||
|
hwPmbsCTPRowStatus
Row status.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.112.1.11.1.4 |
||||||||||||
|
hwPmbsCTPIuaTextIID
Use the text to indicate the interface ID of the PMBS terminal.
|
OctetStringr/w Constraints: range: 0-53 |
.1.3.6.1.4.1.2011.6.112.1.11.1.5 |
hwPmbsCTPOperTable
table.1.3.6.1.4.1.2011.6.112.1.12
·
1 row entry
·
2 columns
This table is used to operate the PMBS user. The index of this table is hwPmbsCTPOperIndex.
This table is used to operate the PMBS user.
The index of this entry is hwPmbsCTPOperIndex.
The index of this entry is hwPmbsCTPOperIndex.
Indexes
hwPmbsCTPOperIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwPmbsCTPOperIndex
Indicates the frame/slot/port.
25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the typ… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.12.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwPmbsCTPPLinkState
Indicates from left to right, each bit indicates plink status of one TEI(0-62) or not, 0 means plink not established, 1 means plink established.
|
Bits Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.12.1.2 |
.1.3.6.1.4.1.2011.6.112.1.13
·
1 row entry
·
42 columns
This table is used to config PSTN user's right and servicedata. The indexes of this table are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex.
This table is used to config PSTN user's right and servicedata.
The indexes of this entry are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex.
The indexes of this entry are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex.
Indexes
hwPstnCTPRightConfigIndex hwPstnCTPRightPortBindIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hwPstnCTPRightConfigIndex
Indicates the frame/slot/port.
31 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the typ… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.13.1.1 |
||||||||
|
hwPstnCTPRightPortBindIndex
Indicates the telephone number index.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.6.112.1.13.1.2 |
||||||||
|
hwPstnCTPRightCallHold
Indicates the right flag of callhold.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.3 |
||||||||
|
hwPstnCTPRightThreeParty
Indicates the right flag of three-party.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.4 |
||||||||
|
hwPstnCTPRightConf
Indicates the right flag of conf.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.5 |
||||||||
|
hwPstnCTPRightCt
Indicates the right flag of ct.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.6 |
||||||||
|
hwPstnCTPRightCw
Indicates the right flag of cw.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.7 |
||||||||
|
hwPstnCTPRightMcid
Indicates the right flag of mcid.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.8 |
||||||||
|
hwPstnCTPRightMwi
Indicates the right flag of mwi.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.9 |
||||||||
|
hwPstnCTPRightTp
obsolete
Indicates the right flag of tp.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.10 |
||||||||
|
hwPstnCTPRightCd
obsolete
Indicates the right flag of cd.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.11 |
||||||||
|
hwPstnCTPRightUus1
obsolete
Indicates the right flag of uus1.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.12 |
||||||||
|
hwPstnCTPRightUus2
obsolete
Indicates the right flag of uus2.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.13 |
||||||||
|
hwPstnCTPRightUus3
obsolete
Indicates the right flag of uus3.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.14 |
||||||||
|
hwPstnCTPRightCentrexNo
It is used to set centrex NO. of SipPstnUser, 4294967295 means to clear the configuration.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.6.112.1.13.1.15 |
||||||||
|
hwPstnCTPRightCentrexPrefix
Indicates the CentrexPrefix of SipPstnUser.
|
OctetStringr/w Constraints: range: 0-7 |
.1.3.6.1.4.1.2011.6.112.1.13.1.16 |
||||||||
|
hwPstnCTPRightCentrexFlag
Indicates the CentrexFlag of SipPstnUser.
Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.17 |
||||||||
|
hwPstnCTPRightMwiMode
Indicates the MwiMode of SipPstnUser.
Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.18 |
||||||||
|
hwPstnCTPRightHotTime
Indicates the HotTime of SipPstnUser.
Unit: second |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.6.112.1.13.1.19 |
||||||||
|
hwPstnCTPRightHotLineNum
Indicates the HotLineNum of SipPstnUser, the length of hotlinenum mustn't exceed 64.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.13.1.20 |
||||||||
|
hwPstnCTPRightDialTone
Indicates the DialTone of SipPstnUser.
Options: 1. normal(1) -normal tone 2. special(2) -special tone 3. mw(3) -message waiting tone 4. stutter(4) -stutter tone |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.21 |
||||||||
|
hwPstnCTPRightCfbNum
Indicates the CfbNum of SipPstnUser.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.13.1.22 |
||||||||
|
hwPstnCTPRightCfnrNum
Indicates the CfnrNum of SipPstnUser.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.13.1.23 |
||||||||
|
hwPstnCTPRightCfuNum
Indicates the CfuNum of SipPstnUser.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.13.1.24 |
||||||||
|
hwPstnCTPRightCfnrTime
Indicates the CfnrTime of SipPstnUser.
Unit: second |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.6.112.1.13.1.25 |
||||||||
|
hwPstnCTPRightAnonymousCall
Indicates the right flag of anonymous-call.
Options: 1. disable(1) -disable anonymous-call 2. enable(2) -enable anonymous-call |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.26 |
||||||||
|
hwPstnCTPRightAuthName
Indicates the authorization username of sippstnuser.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.13.1.27 |
||||||||
|
hwPstnCTPRightAuthPassword
Indicates the authorization password of sippstnuser.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.13.1.28 |
||||||||
|
hwPstnCTPRightEndConfigIndex
Indicates the end shelf/slot/port.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.13.1.29 |
||||||||
|
hwPstnCTPRightAuthPasswordMode
Indicates the authorization mode of the password for sippstnuser.
Options: 1. password(1) -authorized by password 2. ha1(2) --authorized by ha1 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.30 |
||||||||
|
hwPstnCTPRightAuthHA1
Indicates the authorization HA1 value of sippstnuser.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.13.1.31 |
||||||||
|
hwPstnCTPRightAutoReversePolarity
Indicates the right flag of auto reverse polarity.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.32 |
||||||||
|
hwPstnCTPRightDisplayNameMode
Indicates the right flag of display name mode.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.33 |
||||||||
|
hwPstnCTPRightDisplayName
Indicates the display name string.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.13.1.34 |
||||||||
|
hwPstnCTPRightHotLine
Indicates the right flag of hotline.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.35 |
||||||||
|
hwPstnCTPRightPermanentHold
Indicates the right flag of permanent-hold.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.36 |
||||||||
|
hwPstnCTPRightCutoffDisconnect
Indicates the right flag of cutoff-disconnect.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.37 |
||||||||
|
hwPstnCTPRightSccClass
Indicates the right flag of SCC class service, for example call-park, call-pickup, EBO.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.38 |
||||||||
|
hwPstnCTPRightPermanentHoldMode
Indicates the PermanentHoldMode of SipPstnUser.
Options: 1. norecall(1) - no recall 2. reminder(2) -reminder 3. recall(3) -recall |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.39 |
||||||||
|
hwPstnCTPRightPermanentHoldTime
Indicates the PermanentHoldTime of SipPstnUser.
Unit: second |
Integer32r/w Constraints: range: 12-1023 |
.1.3.6.1.4.1.2011.6.112.1.13.1.40 |
||||||||
|
hwPstnCTPRightFastDisconnect
Indicates the right flag of fast-disconnect.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.41 |
||||||||
|
hwPstnCTPRightDc
Indicates the right flag of dual communication.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.13.1.42 |
.1.3.6.1.4.1.2011.6.112.1.14
·
1 row entry
·
5 columns
This table is used to config extern number of the PSTN or ISDN user. The indexes of this table are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex.
This table is used to config extern number of the PSTN or ISDN user.
The indexes of this entry are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex.
The indexes of this entry are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex.
Indexes
hwCTPExternNumberConfigIndex hwCTPExternNumberPortBindIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwCTPExternNumberConfigIndex
Indicates the frame/slot/port.
31 0 xxxxxxx | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the typ… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.14.1.1 |
||||||||||||
|
hwCTPExternNumberPortBindIndex
Indicates the extend number index.
If the value equal -1, then return the idle index of this shelf/slot/port. |
Integer32 Constraints: range: 1-65534 |
.1.3.6.1.4.1.2011.6.112.1.14.1.2 |
||||||||||||
|
hwCTPExternNumber
Indicates the extend number. - means to delete this extern number.
|
OctetStringr/w Constraints: range: 1-64 |
.1.3.6.1.4.1.2011.6.112.1.14.1.3 |
||||||||||||
|
hwCTPExternRowStatus
RowStatus
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.112.1.14.1.4 |
||||||||||||
|
hwCTPExternUserGroupid
It indicates the user group ID.
-1 indicates clear the user group info. |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.2011.6.112.1.14.1.5 |
hwBraCTPRightConfigTable
table.1.3.6.1.4.1.2011.6.112.1.15
·
1 row entry
·
19 columns
This table is used to config BRA user's right and servicedata. The indexes of this table are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex.
This table is used to config BRA user's right and servicedata.
The indexes of this entry are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex.
The indexes of this entry are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex.
Indexes
hwBraCTPRightConfigIndex hwBraCTPRightPortBindIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hwBraCTPRightConfigIndex
Indicates the frame/slot/port.
31 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the typ… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.15.1.1 |
||||||
|
hwBraCTPRightPortBindIndex
Indicates the telephone number index.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.6.112.1.15.1.2 |
||||||
|
hwBraCTPRightAuthName
Indicates the authorization username of sipbrauser.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.15.1.3 |
||||||
|
hwBraCTPRightAuthPassword
Indicates the authorization password of sipbrauser.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.15.1.4 |
||||||
|
hwBraCTPRightEndConfigIndex
Indicates the end shelf/slot/port.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.15.1.5 |
||||||
|
hwBraCTPRightAuthPasswordMode
Indicates the authorization mode of the password for sipbrauser.
Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.15.1.6 |
||||||
|
hwBraCTPRightAuthHA1
Indicates the authorization HA1 value of sipbrauser.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.15.1.7 |
||||||
|
hwBraCTPRightCentrexNo
It is used to set centrex NO. of SipBraUser, 4294967295 means to clear the configuration.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.6.112.1.15.1.8 |
||||||
|
hwBraCTPRightCentrexPrefix
Indicates the CentrexPrefix of SipBraUser.
|
OctetStringr/w Constraints: range: 0-7 |
.1.3.6.1.4.1.2011.6.112.1.15.1.9 |
||||||
|
hwBraCTPRightCentrexFlag
Indicates the CentrexFlag of SipBraUser.
Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.15.1.10 |
||||||
|
hwBraCTPRightMwiMode
Indicates the MwiMode of SipBraUser.
Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.15.1.11 |
||||||
|
hwBraCTPRightCallHold
Indicates the right flag of callhold.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.15.1.12 |
||||||
|
hwBraCTPRightThreeParty
Indicates the right flag of three-party.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.15.1.13 |
||||||
|
hwBraCTPRightConf
Indicates the right flag of conf.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.15.1.14 |
||||||
|
hwBraCTPRightCt
Indicates the right flag of ct.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.15.1.15 |
||||||
|
hwBraCTPRightCw
Indicates the right flag of cw.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.15.1.16 |
||||||
|
hwBraCTPRightMcid
Indicates the right flag of mcid.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.15.1.17 |
||||||
|
hwBraCTPRightMwi
Indicates the right flag of mwi.
Options: 1. disable(1) -disable 2. enable(2) -enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.15.1.18 |
||||||
|
hwBraCTPRightCliWildcardLen
Indicates the wildcard length of CLI number. 255 means to clear the configuration.
|
Integer32r/w Constraints: range: 0-64range: 255-255 |
.1.3.6.1.4.1.2011.6.112.1.15.1.19 |
hwPraCTPRightConfigTable
table.1.3.6.1.4.1.2011.6.112.1.16
·
1 row entry
·
12 columns
This table is used to config PRA user's servicedata. The indexes of this table are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex.
This table is used to config PRA user's servicedata.
The indexes of this entry are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex.
The indexes of this entry are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex.
Indexes
hwPraCTPRightConfigIndex hwPraCTPRightPortBindIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hwPraCTPRightConfigIndex
Indicates the frame/slot/port.
31 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the typ… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.16.1.1 |
||||||
|
hwPraCTPRightPortBindIndex
Indicates the telephone number index.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.6.112.1.16.1.2 |
||||||
|
hwPraCTPRightAuthName
Indicates the authorization username of sipprauser.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.16.1.3 |
||||||
|
hwPraCTPRightAuthPassword
Indicates the authorization password of sipprauser.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.16.1.4 |
||||||
|
hwPraCTPRightEndConfigIndex
Indicates the end shelf/slot/port.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.16.1.5 |
||||||
|
hwPraCTPRightAuthPasswordMode
Indicates the authorization mode of the password for sipprauser.
Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.16.1.6 |
||||||
|
hwPraCTPRightAuthHA1
Indicates the authorization HA1 value of sipprauser.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.16.1.7 |
||||||
|
hwPraCTPRightCentrexNo
It is used to set centrex NO. of SipPraUser, 4294967295 means to clear the configuration.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.6.112.1.16.1.8 |
||||||
|
hwPraCTPRightCentrexPrefix
Indicates the CentrexPrefix of SipPraUser.
|
OctetStringr/w Constraints: range: 0-7 |
.1.3.6.1.4.1.2011.6.112.1.16.1.9 |
||||||
|
hwPraCTPRightCentrexFlag
Indicates the CentrexFlag of SipPraUser.
Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.16.1.10 |
||||||
|
hwPraCTPRightMwiMode
Indicates the MwiMode of SipPraUser.
Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.16.1.11 |
||||||
|
hwPraCTPRightCliWildcardLen
Indicates the wildcard length of CLI number. 255 means to clear the configuration.
|
Integer32r/w Constraints: range: 0-64range: 255-255 |
.1.3.6.1.4.1.2011.6.112.1.16.1.12 |
hwR2CTPConfigTable
table.1.3.6.1.4.1.2011.6.112.1.17
·
1 row entry
·
13 columns
It is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature. The index of this table is the hwR2CTPConfigIndex. The attributes of a R2 user with the VoIP feature include the gateway ID, terminal ID, R2 profile index. Through the table, you can configure, modify, and query the above-mentioned attributes of the R2 user.
It is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature.
The index of this entry is the hwR2CTPConfigIndex.
The attributes of a R2 user…
The index of this entry is the hwR2CTPConfigIndex.
The attributes of a R2 user…
Indexes
hwR2CTPConfigIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwR2CTPConfigIndex
Indicates the frame/slot/port.
31 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the ty… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.17.1.1 |
||||||||||||
|
hwR2CTPMgId
Indicates the MG ID.
|
Integer32r/w Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.112.1.17.1.2 |
||||||||||||
|
hwR2CTPTerminationID
Indicates the start terminal ID (only the character string of digit type is supported).
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.17.1.3 |
||||||||||||
|
hwR2CTPSignalProfileIndex
Indicates the R2 signal profile index.
|
Integer32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.2011.6.112.1.17.1.4 |
||||||||||||
|
hwR2CTPSignalProfileName
Indicates the R2 signal profile name.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.17.1.5 |
||||||||||||
|
hwR2CTPRowStatus
Indicates the row status.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.112.1.17.1.6 |
||||||||||||
|
hwR2CTPPriorityFlag
Indicates terminal priority.
Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.17.1.7 |
||||||||||||
|
hwR2CTPTelNo
Indicates telphone number.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.17.1.8 |
||||||||||||
|
hwR2CTPUserGroupid
It indicates the user group ID.
-1 indicates clear the user group info. |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.2011.6.112.1.17.1.9 |
||||||||||||
|
hwR2CTPDigitMapGroupName
It indicates the digitmap group name.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.17.1.10 |
||||||||||||
|
hwR2CTPRemoteRingFlag
Indicates RemoteRing.
Options: 1. disable(1) -disable receive remote early media 2. enable(2) -enable receive remote early media 3. null(-1) -invalid value |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.17.1.11 |
||||||||||||
|
hwR2CTPConfigIncomingcallChangeName
It indicates the number change name of incoming call.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.17.1.12 |
||||||||||||
|
hwR2CTPConfigOutgoingcallChangeName
It indicates the number change name of outgoing call.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.17.1.13 |
hwR2CTPOperTable
table.1.3.6.1.4.1.2011.6.112.1.18
·
1 row entry
·
6 columns
It is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP feature. The index of this table is hwR2CTPOperIndex. Through this table, you can query the running status of 32 B channels of the R2 service, and management status of 32 B channels of the R2 service. Through the table, services on the R2 port can be terminated, started, and the service status can be queried.
It is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP feature.
The index of this entry is hwR2CTPOperIndex.
Throu…
The index of this entry is hwR2CTPOperIndex.
Throu…
Indexes
hwR2CTPOperIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hwR2CTPOperIndex
Indicates the frame/slot/port.
31 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the ty… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.18.1.1 |
||||||
|
hwR2CTPBchnSrvState
Indicates the running status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character is as follows: 1-Idle; 2-Busy; 3-Faulty; 4-Unavailable.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.18.1.2 |
||||||
|
hwR2CTPBchnAdminState
Indicates the administration status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character is as follows:
1-blocked-locally; 2-blocked-remotely; 3-in-s… |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.18.1.3 |
||||||
|
hwR2CTPAdminOper
Indicates the service operation.
Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.18.1.4 |
||||||
|
hwR2CTPMaxCobTime
Indicates length of waiting timer for R2 user defer end service.
0 is not allowed to set. Default: 240 Unit: minute |
Integer32r/w Constraints: range: 0-1440 |
.1.3.6.1.4.1.2011.6.112.1.18.1.5 |
||||||
|
hwR2CTPOnexpire
Indicates disposal mode when R2 user defer end service timeout.
Options: 1. force(1) -force end service 2. cancel(2) -cancel end service Default: force(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.18.1.6 |
hwR2CTPRightConfigTable
table.1.3.6.1.4.1.2011.6.112.1.19
·
1 row entry
·
6 columns
This table is used to config R2 user's right. The indexes of this table are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex.
This table is used to config R2 user's right.
The indexes of this entry are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex.
The indexes of this entry are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex.
Indexes
hwR2CTPRightConfigIndex hwR2CTPRightPortBindIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hwR2CTPRightConfigIndex
Indicates the frame/slot/port.
31 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the typ… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.112.1.19.1.1 |
||||
|
hwR2CTPRightPortBindIndex
Indicates the telephone number index.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.6.112.1.19.1.2 |
||||
|
hwR2CTPRightAuthName
Indicates the authorization username of sipR2user.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.19.1.3 |
||||
|
hwR2CTPRightAuthPassword
Indicates the authorization password of sipR2user.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.112.1.19.1.4 |
||||
|
hwR2CTPRightAuthPasswordMode
Indicates the authorization mode of the password for sipR2user.
Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.112.1.19.1.5 |
||||
|
hwR2CTPRightAuthHA1
Indicates the authorization HA1 value of sipR2user.
The character set is unrestricted. |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.112.1.19.1.6 |