hwPstnCTPTerminationID
HUAWEI-VOICEUSER-MIB ·
.1.3.6.1.4.1.2011.6.112.1.1.1.3
Object
column
r/w
OctetString
Indicates the terminal ID (only the character string of digit type is supported).
Context
- MIB
- HUAWEI-VOICEUSER-MIB
- OID
.1.3.6.1.4.1.2011.6.112.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwPstnCTPConfigEntry
- Table
- hwPstnCTPConfigTable
- Siblings
- 29
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPstnCTPConfigIndex Indicates the frame/slot/port.
24 0
0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.112.1.1.1.1 |
| hwPstnCTPFSKDelayInterval Indicates the FSK delay interval.
Unit: 10ms | column | Integer32 | .1.3.6.1.4.1.2011.6.112.1.1.1.10 |
| hwPstnCTPCidTransWhen Indicates the time for delivering the caller ID.
Options:
1. afterRing(1) -transmit CID after ringing
2. beforeRing(2) -transmit CID before ringing | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.11 |
| hwPstnCTPCidFormat Indicates the format of the caller ID.
Options:
1. sdmfFsk(1) -SDMF FSK format
2. mdmfFsk(2) -MDMF FSK format
3. dtmf(3) -DTMF format
4. russia(4) -russia format
5. etsi(5) -etsi… | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.12 |
| hwPstnCTPVQEAgc Indicates enable AGC or not.
Options:
1. enable(1) -enable AGC
2. disable(2) -disable AGC | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.13 |
| hwPstnCTPVQESns Indicates enable SNS or not.
Options:
1. enable(1) -enable SNS
2. disable(2) -disable SNS | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.14 |
| hwPstnCTPVQEAgcLevel Indicates set AGC target value.
Unit: dbm0 | column | Integer32 | .1.3.6.1.4.1.2011.6.112.1.1.1.15 |
| hwPstnCTPVQESnsLevel Indicates set VQE noise suppression level.
Unit: db | column | Integer32 | .1.3.6.1.4.1.2011.6.112.1.1.1.16 |
| hwPstnCTPDspInputGain Dsp input gain.
1: -10db
2: -9db
3: -8db
4: -7db
5: -6db
6: -5db
7: -4db
8: -3db
9: -2db
10: -1db
11: 0db
12: 1db
13: 2db
14: 3db
15: 4… | column | Integer32 | .1.3.6.1.4.1.2011.6.112.1.1.1.17 |
| hwPstnCTPDspOutputGain Dsp output gain.
1: -10db
2: -9db
3: -8db
4: -7db
5: -6db
6: -5db
7: -4db
8: -3db
9: -2db
10: -1db
11: 0db
12: 1db
13: 2db
14: 3db
15: … | column | Integer32 | .1.3.6.1.4.1.2011.6.112.1.1.1.18 |
| hwPstnCTPDetectANSbarBySingleToneFlag It indicates whether the ANSbar signal detected by SingleTone is supported.
Options:
1. enable(1) -the ANSbar signal detected by SingleTone is supported
2. disable(2) -the ANSbar… | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.19 |
| hwPstnCTPMgId Indicates the MG ID. | column | Integer32 | .1.3.6.1.4.1.2011.6.112.1.1.1.2 |
| hwPstnCTPBellANSFlag It indicates whether the Bell ANS is supported.
Options:
1. enable(1) -the Bell ANS is supported
2. disable(2) -the Bell ANS is not supported | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.20 |
| hwPstnCTPDspParaTemplate The index of dsp parameter template name. | column | OctetString | .1.3.6.1.4.1.2011.6.112.1.1.1.21 |
| hwPstnCTPCidFskMode It indicates the mode of fsk.
Options:
1. bell202(1) -bell 202
2. ccittv23(2) -ccitt v23
3. ntt(3) -ntt | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.22 |
| hwPstnCTPCidTasPattern It indicates the mode of tas.
Options:
1. noTas(1) -no tas
2. dtAs(2) -DT as | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.23 |
| hwPstnCTPUserGroupid It indicates the user group ID.
-1 indicates clear the user group info. | column | Integer32 | .1.3.6.1.4.1.2011.6.112.1.1.1.24 |
| hwPstnCTPDigitMapGroupName It indicates the digitmap group name. | column | OctetString | .1.3.6.1.4.1.2011.6.112.1.1.1.25 |
| hwPstnCTPForceSendFsk Indicates enable force send FSK or not.
Options:
1. enable(1) -enable force send FSK
2. disable(2) -disable force send FSK | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.26 |
| hwPstnCTPFSKAlertInterval It indicates fskend to alert Interval.
-1 indicate invalid value.
Unit: 10ms | column | Integer32 | .1.3.6.1.4.1.2011.6.112.1.1.1.27 |
| hwPstnCTPConfigDefaultCli It indicates the default cli number of outgoing call. | column | OctetString | .1.3.6.1.4.1.2011.6.112.1.1.1.28 |
| hwPstnCTPEOCTime Indicates the end of call interval.
Unit: 10ms | column | Integer32 | .1.3.6.1.4.1.2011.6.112.1.1.1.29 |
| hwPstnCTPRemoteBlockPowerDeny Indicates the flag of remote block power deny.
Options:
1. enable(1) - enable remote block power deny
2. disable(2) - disable remote block power deny | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.30 |
| hwPstnCTPTelNo Indicates the telephone number. | column | OctetString | .1.3.6.1.4.1.2011.6.112.1.1.1.4 |
| hwPstnCTPRowStatus Indicates the row status.The operations include activate, shut down, not start, create and register, create and wait, and delete. The operations are not used in the V8R61. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.112.1.1.1.5 |
| hwPstnCTPLayerFlag Indicates whether to layer.
Options:
1. noLayer(1) -not to layer
2. layer(2) -to layer
3. null(-1) -invalid value | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.6 |
| hwPstnCTPPriorityFlag Indicates the priority of the terminal.
Options:
1. cat1(1) -the highest priority
2. cat2(2) -the middle priority
3. cat3(3) -the lowest priority | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.7 |
| hwPstnCTPPotsLineType Indicates the subscriber type.
Options:
1. del(1) -DEL
2. lcPBX(2) -Loop Calling PBX
3. ecPBX(3) -earth calling PBX
4. payPhone(4) -PayPhone | column | Enumeration | .1.3.6.1.4.1.2011.6.112.1.1.1.8 |
| hwPstnCTPDCTime Indicates the disconnect clear interval.
Unit: 10ms | column | Integer32 | .1.3.6.1.4.1.2011.6.112.1.1.1.9 |