HUAWEI-RSTP-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
25

hwdot1dStpPortXTable

table
.1.3.6.1.4.1.2011.5.21.1.5 · 1 row entry · 6 columns
Open in standard view 
This table describes rstp port expand table,
The index of this table is is not supported.
hwdot1dStpPortXEntry entry .1.3.6.1.4.1.2011.5.21.1.5.1
This table describes rstp port expand table,
The index of this entry is is not supported.
Indexes
No indexes recorded
Column Syntax OID
hwdot1dStpPortAdminStatus
Enabling/Disabling Spanning Tree on the Port
The spanning tree can be disabled on specified Ethernet port
to forbid these ports participating in spanning tree calculation.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.21.1.5.1.1
hwdot1dStpPortEdgeport
Configuring specified port to be EdgePort,
If the current Ethernet port is not connected with any
Ethernet port of other bridges, this port should be configured as
EdgePort to enable it to enter forwarding state direc…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.21.1.5.1.2
hwdot1dStpPortPointToPoint
Configuring the Port to Connect Point-to-Point Link,
The two ports connected via the Point-to-Point link can
enter the forwarding state rapidly by transmitting synchronous packets,
so that unnecessary forwarding delay …
Enumerationr/w
Enumerated Values:
1forceTrue
2forceFalse
3auto
 .1.3.6.1.4.1.2011.5.21.1.5.1.3
hwdot1dStpMcheck
Configuring mCheck of Specified Port,
By configuring mCheck, the user can check if there is the bridge
running STP in the network segment connected with the active Ethernet port.
If there is, the port will transfer to…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.21.1.5.1.4
hwdot1dStpTransLimit
Configuring Maximum Transmission Speed of Specified Port,
The maximum transmission speed of Ethernet port is related
to its physical state and network structure.
The user can configure it according to the actual netwo…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.5.21.1.5.1.5
hwdot1dSetStpDefaultPortCost
come back to default path cost of specified port,
The path cost of Ethernet port is related to its link speed.
The higher the link speed is, the lower the path cost should be configured.
When this parameter is set to …
Enumerationr/w
Enumerated Values:
1enable
 .1.3.6.1.4.1.2011.5.21.1.5.1.6

hwdot1dStpPortStatTable

table
.1.3.6.1.4.1.2011.5.21.1.6 · 1 row entry · 7 columns
Open in standard view 
This table describes rstp port statistic table,
The index of this table is not supported.
hwdot1dStpPortStatEntry entry .1.3.6.1.4.1.2011.5.21.1.6.1
This table describes rstp port statistic table,
The index of this entry is not supported.
Indexes
No indexes recorded
Column Syntax OID
hwdot1dStpRXStpBPDU
Number of STP BPDU Received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.21.1.6.1.1
hwdot1dStpTXStpBPDU
Number of STP BPDU Transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.21.1.6.1.2
hwdot1dStpRXTCNBPDU
Number of TCN BPDU Received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.21.1.6.1.3
hwdot1dStpTXTCNBPDU
Number of TCN BPDU Transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.21.1.6.1.4
hwdot1dStpRXRSTPBPDU
Number of RSTP BPDU Received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.21.1.6.1.5
hwdot1dStpTXRSTPBPDU
Number of RSTP BPDU Transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.21.1.6.1.6
hwdot1dStpClearStatistics
To clear statistics of Rapid Spanning Tree Protocol (RSTP for short).
Options:
1. clear(1) -indicates clearing statistics of Rapid Spanning Tree Protocol
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.2011.5.21.1.6.1.7

hwRingCheckRecordTable

table
.1.3.6.1.4.1.2011.5.21.1.12 · 1 row entry · 6 columns
Open in standard view 
Used to query the deactivation information of ring check,
The index of this table is hwRingCheckRecordIndex.
hwRingCheckRecordEntry entry .1.3.6.1.4.1.2011.5.21.1.12.1
Used to query the deactivation information of ring check,
The index of this entry is hwRingCheckRecordIndex.
Indexes
hwRingCheckRecordIndex
Column Syntax OID
hwRingCheckRecordIndex
Indicates the index of a deactivation record.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.5.21.1.12.1.1
hwRingCheckRecordFrameIndex
Indicates the Frame ID of the port/ONT/CNU that is deactivated by ring check.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.21.1.12.1.2
hwRingCheckRecordSlotIndex
Indicates the Slot ID of the port/ONT/CNU that is deactivated by ring check.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.21.1.12.1.3
hwRingCheckRecordPortIndex
Indicates the Port ID of the port/ONT/CNU that is deactivated by ring check.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.21.1.12.1.4
hwRingCheckRecordOntIndex
Indicates the index of the ONT/CNU that is deactivated by ring check.
-1 indicates that the operation object is not ONT/CNU.
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.2011.5.21.1.12.1.5
hwRingCheckRecordCountdown
Indicates remaining waiting time for automatic activation.
-1 indicates that the automatic activation function of ring check is disabled.
Unit: minute
Integer32
Constraints:
range: -1-1440
 .1.3.6.1.4.1.2011.5.21.1.12.1.6

hwRingCheckOnuSingleTestReportTable

table
.1.3.6.1.4.1.2011.5.21.1.22 · 1 row entry · 6 columns
Open in standard view 
Used to query the report of a single ONU ring check.
The index of this table is hwRingCheckOnuSingleTestReportIndex.
hwRingCheckOnuSingleTestReportEntry entry .1.3.6.1.4.1.2011.5.21.1.22.1
Used to query the report of a single ONU ring check.
The index of this entry is hwRingCheckOnuSingleTestReportIndex.
Indexes
hwRingCheckOnuSingleTestReportIndex
Column Syntax OID
hwRingCheckOnuSingleTestReportIndex
Index of the report of a single ONU ring check.
Unsigned32
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.5.21.1.22.1.1
hwRingCheckOnuSingleTestReportPonPort
Port index in a single ONU ring check.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.21.1.22.1.2
hwRingCheckOnuSingleTestReportOnuId
ONT ID in a single ONU ring check.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.21.1.22.1.3
hwRingCheckOnuSingleTestReportLastTime
Latest report time of a single ONU ring check.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.5.21.1.22.1.4
hwRingCheckOnuSingleTestReportLocation
Port in a single ONU ring check.
OctetString .1.3.6.1.4.1.2011.5.21.1.22.1.5
hwRingCheckOnuSingleTestReportStatus
Status of a single ONU ring check.
Options:
1. detected(1) -indicates a ring network is detected.
2. resumed(2) -indicates the ring network is fixed.
Enumeration
Enumerated Values:
1detected
2resumed
 .1.3.6.1.4.1.2011.5.21.1.22.1.6