hwdot1dStpTransLimit
HUAWEI-RSTP-EXT-MIB ·
.1.3.6.1.4.1.2011.5.21.1.5.1.5
Object
column
r/w
Integer32
Configuring Maximum Transmission Speed of Specified Port, The maximum transmission speed of Ethernet port is related to its physical state and network structure. The user can configure it according to the actual network situation.
Context
- MIB
- HUAWEI-RSTP-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.21.1.5.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwdot1dStpPortXEntry
- Table
- hwdot1dStpPortXTable
- Siblings
- 5
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwdot1dStpPortAdminStatus Enabling/Disabling Spanning Tree on the Port
The spanning tree can be disabled on specified Ethernet port
to forbid these ports participating in spanning tree calculation. | column | EnabledStatus | .1.3.6.1.4.1.2011.5.21.1.5.1.1 |
| hwdot1dStpPortEdgeport Configuring specified port to be EdgePort,
If the current Ethernet port is not connected with any
Ethernet port of other bridges, this port should be configured as
EdgePort to e… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.21.1.5.1.2 |
| hwdot1dStpPortPointToPoint Configuring the Port to Connect Point-to-Point Link,
The two ports connected via the Point-to-Point link can
enter the forwarding state rapidly by transmitting synchronous packet… | column | Enumeration | .1.3.6.1.4.1.2011.5.21.1.5.1.3 |
| hwdot1dStpMcheck Configuring mCheck of Specified Port,
By configuring mCheck, the user can check if there is the bridge
running STP in the network segment connected with the active Ethernet port.… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.21.1.5.1.4 |
| hwdot1dSetStpDefaultPortCost come back to default path cost of specified port,
The path cost of Ethernet port is related to its link speed.
The higher the link speed is, the lower the path cost should be con… | column | Enumeration | .1.3.6.1.4.1.2011.5.21.1.5.1.6 |