HUAWEI-MSU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
64

hwSdhGroupTable

table
.1.3.6.1.4.1.2011.6.38.1.0 · 1 row entry · 32 columns
Open in standard view 
This table is used for the MSU SDH group management,
such as physical status of the MSU optical port.
The index of this table is ifIndex.
hwSdhGroupEntry entry .1.3.6.1.4.1.2011.6.38.1.0.1
This table is used for the MSU SDH group management,
such as physical status of the MSU optical port.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwSdhInterfaceState
Physical status of the MSU optical port.
Options:
1. normal(1) -physical status of the MSU optical port is normal
2. fault(2) -physical status of the MSU optical port is fault
Enumeration
Enumerated Values:
1normal
2fault
 .1.3.6.1.4.1.2011.6.38.1.0.1.1
hwSdhInterfaceLineState
Working status of the line of the MSU optical port.
Options:
1. signal(1) -working status of the line of the MSU optical port is signal
2. noSignal(2) -working status of the line of the MSU optical port is noSignal
Enumeration
Enumerated Values:
1signal
2noSignal
 .1.3.6.1.4.1.2011.6.38.1.0.1.2
hwSdhInterfaceFiberType
Type of the fiber connected to the MSU optical port.
Options:
1. singleMode(1) -single-mode
2. multipleMode(2) -multi-mode
3. invalid(-1) -invalid value
Enumeration
Enumerated Values:
-1invalid
1singleMode
2multipleMode
 .1.3.6.1.4.1.2011.6.38.1.0.1.3
hwSdhInterfacePhyType
Physical type of the MSU port.
Options:
1. optical(1) -physical type of the MSU port is optical
2. electric(2) -physical type of the MSU port is electric
Enumeration
Enumerated Values:
1optical
2electric
 .1.3.6.1.4.1.2011.6.38.1.0.1.4
hwSdhInterfaceLineType
Line type of the MSU optical port.
Options:
1. stm1(1) -line type of the MSU optical port is stm1
2. stm4(2) -line type of the MSU optical port is stm4
Enumeration
Enumerated Values:
1stm1
2stm4
 .1.3.6.1.4.1.2011.6.38.1.0.1.5
hwSdhInterfaceSpeed
Rate of the MSU optical port.
Options:
1. speed155(1) -rate of the MSU optical port is 155 Mbps
2. speed622(2) -rate of the MSU optical port is 622 Mbps
3. invalid(-1) -invalid value
Enumeration
Enumerated Values:
-1invalid
1speed155
2speed622
 .1.3.6.1.4.1.2011.6.38.1.0.1.6
hwSdhInterfaceTxClock
Tx clock of the MSU optical port.
Options:
1. system(1) -tx clock of the MSU optical port is system
2. sdh(2) -tx clock of the MSU optical port is sdh
3. line0(3) -tx clock of the MSU optical port is line0
…
Enumerationr/w
Enumerated Values:
-1invalid
1system
2sdh
3line0
4line1
 .1.3.6.1.4.1.2011.6.38.1.0.1.7
hwSdhGroupLoopType
Type of the loopback test on the MSU optical port.
Options:
1. noLoop(1) -no loopback
2. localLoop(2) -local loopback
3. remoteLoop(3) -remote loopback
Enumerationr/w
Enumerated Values:
1noLoop
2localLoop
3remoteLoop
 .1.3.6.1.4.1.2011.6.38.1.0.1.8
hwSdhTriNumberMode
SDH tributary numbering mode of the MSU optical port.
Options:
1. huawei(1) -SDH tributary numbering mode of the MSU optical port is huawei
2. lucent(2) -SDH tributary numbering mode of the MSU optical port is lucent
Enumerationr/w
Enumerated Values:
1huawei
2lucent
 .1.3.6.1.4.1.2011.6.38.1.0.1.9
hwSdhGroupOvhdSendJ0Type
The type of the sended MSU SDH overhead command J0.
Options:
1. short(1) -type of the MSU SDH overhead command J0 is short
2. long(2) -type of the MSU SDH overhead command J0 is long
3. invalid(-1) -invalid v…
Enumerationr/w
Enumerated Values:
-1invalid
1short
2long
 .1.3.6.1.4.1.2011.6.38.1.0.1.10
hwSdhGroupOvhdSendJ0String
Send character string of the SDH overhead command J0.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.6.38.1.0.1.11
hwSdhGroupOvhdRecvJ0Type
The type of the received MSU SDH overhead command J0.
Options:
1. short(1) -type of the MSU SDH overhead command J0 is short
2. long(2) -type of the MSU SDH overhead command J0 is long
3. invalid(-1) -invalid …
Enumerationr/w
Enumerated Values:
-1invalid
1short
2long
 .1.3.6.1.4.1.2011.6.38.1.0.1.12
hwSdhGroupOvhdRecvJ0String
Receive character string of the SDH overhead command J0.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.6.38.1.0.1.13
hwSdhGroupOvhdSendJ1Type
The type of the sended MSU SDH overhead command word J1.
Options:
1. short(1) -type of the MSU SDH overhead command word J1 is short
2. long(2) -type of the MSU SDH overhead command word J1 is long
3. invalid(-…
Enumerationr/w
Enumerated Values:
-1invalid
1short
2long
 .1.3.6.1.4.1.2011.6.38.1.0.1.14
hwSdhGroupOvhdSendJ1String
Send character string of the SDH overhead command J1.
OctetStringr/w
Constraints:
range: 0-62
 .1.3.6.1.4.1.2011.6.38.1.0.1.15
hwSdhGroupOvhdRecvJ1Type
The type of the received MSU SDH overhead command word J1.
Options:
1. short(1) -type of the MSU SDH overhead command word J1 is short
2. long(2) -type of the MSU SDH overhead command word J1 is long
3. invalid(-…
Enumerationr/w
Enumerated Values:
-1invalid
1short
2long
 .1.3.6.1.4.1.2011.6.38.1.0.1.16
hwSdhGroupOvhdRecvJ1String
Receive character string of the SDH overhead command J1.
OctetStringr/w
Constraints:
range: 0-62
 .1.3.6.1.4.1.2011.6.38.1.0.1.17
hwSdhGroupOvhdSendS1Value
Send value of SDH overhead command word S1.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.2011.6.38.1.0.1.18
hwSdhGroupOvhdSendC2Value
Send value of the SDH overhead command word C2.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.2011.6.38.1.0.1.19
hwSdhGroupOvhdRecvedJ0Type
The type of the received MSU SDH overhead command word J0.
Options:
1. short(1) -type of the MSU SDH overhead command word J0 is short
2. long(2) -type of the MSU SDH overhead command word J0 is long
3. invalid…
Enumeration
Enumerated Values:
-1invalid
1short
2long
 .1.3.6.1.4.1.2011.6.38.1.0.1.20
hwSdhGroupOvhdRecvedJ0String
Receive character string of the SDH overhead command J0.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.6.38.1.0.1.21
hwSdhGroupOvhdRecvedJ1Type
The type of the received MSU SDH overhead command word J1.
Options:
1. short(1) -type of the MSU SDH overhead command word J1 is short
2. long(2) -type of the MSU SDH overhead command word J1 is long
3. invalid…
Enumeration
Enumerated Values:
-1invalid
1short
2long
 .1.3.6.1.4.1.2011.6.38.1.0.1.22
hwSdhGroupOvhdRecvedJ1String
Receive character string of the SDH overhead command J1.
OctetString
Constraints:
range: 0-62
 .1.3.6.1.4.1.2011.6.38.1.0.1.23
hwSdhGroupOvhdRecvedS1
Receive value of the SDH overhead command word S1.
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.2011.6.38.1.0.1.24
hwSdhGroupOvhdRecvedC2
Receive value of the SDH overhead command word C2.
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.2011.6.38.1.0.1.25
hwSdhGroupAlarmState
the SDH group alarm state, per bit indicates one kind of alarm, 1 means exist 0 means not exist.
0xFFFFFFFF,means invalid value
bit0 =RLOS receive loss of signal alarm exist
bit1 =ROOF …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.38.1.0.1.26
hwSdhOpticPowerSDThreshold
The level of threshold for sd of optic port.
Options:
1. eminus5(5) -1.0e-5(5)
2. eminus6(6) -1.0e-6(6)
3. eminus7(7) -1.0e-7(7)
4. eminus8(8) -1.0e-8(8)
5. eminus9(9) -1.0e-9(9)
Enumerationr/w
Enumerated Values:
5eminus5
6eminus6
7eminus7
8eminus8
9eminus9
 .1.3.6.1.4.1.2011.6.38.1.0.1.27
hwSdhGroupPerfAdminStatus
The operation of the performance on the port.
Options:
1. reset(1) -the operation of the performance on the port is reset
2. invalid(-1) -invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1reset
 .1.3.6.1.4.1.2011.6.38.1.0.1.28
hwSdhInterfaceIP
The IP address of STM-1 port.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.38.1.0.1.29
hwSdhInterfaceMac
The Mac address of STM-1 port.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.6.38.1.0.1.30
hwSdhGroupOvhdRecvJ0CheckSwitch
Indicates the check switch of SDH overhead command J0.
Options:
1. enable(1) -indicates that SDH overhead command J0 to be checked.
2. disable(2) -indicates that SDH overhead command J0 not to be checked.
Default:…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.38.1.0.1.31
hwSdhGroupOvhdRecvJ1CheckSwitch
Indicates the check switch of SDH overhead command J1.
Options:
1. enable(1) -indicates that SDH overhead command J1 to be checked.
2. disable(2) -indicates that SDH overhead command J1 not to be checked.
Default:…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.38.1.0.1.32

hwSdhTributaryTable

table
.1.3.6.1.4.1.2011.6.38.1.1 · 1 row entry · 14 columns
Open in standard view 
This table is used for the MSU SDH tributary management,
such as type of the loopback test on the MSU SDH tributary.
The index of this table is ifIndex.
hwSdhTributaryEntry entry .1.3.6.1.4.1.2011.6.38.1.1.1
This table is used for the MSU SDH tributary management,
such as type of the loopback test on the MSU SDH tributary.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwSdhTriLoopType
Type of the loopback test on the MSU SDH tributary.
Options:
1. noLoop(1) -no loopback
2. localLoop(2) -local loopback
3. remoteLoop(3) -remote loopback
Enumerationr/w
Enumerated Values:
1noLoop
2localLoop
3remoteLoop
 .1.3.6.1.4.1.2011.6.38.1.1.1.1
hwSdhTriOvhdSendJ2String
Send character string of the SDH overhead command J2.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.6.38.1.1.1.2
hwSdhTriOvhdRecvJ2String
Receive character string of the SDH overhead command J2.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.6.38.1.1.1.3
hwSdhTriOvhdSendV5Value
Send value of SDH overhead command word V5.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.2011.6.38.1.1.1.4
hwSdhTriOvhdRecvedJ2
Receive character string of the SDH overhead command J2.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.6.38.1.1.1.5
hwSdhTriOvhdRecvedV5
Receive value of the SDH overhead command word V5.
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.2011.6.38.1.1.1.6
hwSdhTriAlarmState
The SDH tributary unit alarm state, per bit indicates one kind of alarm,
1 means exist; 0 means not exist.
0xFFFFFFFF,means invalid value
bit0 = TU-AIS Alarm Indication Signal in Tributary Unit
bit1 = TU-LOP Loss of…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.38.1.1.1.7
hwSdhTrivc12channlesstate
The SDH tributary unit path state.
Options:
1. distributed(1) -the SDH tributary unit path state is distributed
2. nondistributive(2) -the SDH tributary unit path state is nondistributive
3. invalid(-1) -i…
Enumeration
Enumerated Values:
-1invalid
1distributed
2nondistributive
 .1.3.6.1.4.1.2011.6.38.1.1.1.8
hwSdhTriPerfAdminStatus
The operation of the performance on the port.
Options:
1. reset(1) -the operation of the performance on the port is reset
2. invalid(-1) -invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1reset
 .1.3.6.1.4.1.2011.6.38.1.1.1.9
hwSdhTrivc12AlarmState
The SDH tributary unit alarm state, per bit indicates one kind of alarm, 1 means exist 0 means not exist.
0xFFFFFFFF,means invalid value
bit0 = AIS Remote Alarm Indication Signal in Tributary Unit
bit1 = …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.38.1.1.1.10
hwSdhTrivc12JitterBuffer
Value of JitterBuffer, must be multiple of 125.
Unit: us
Integer32r/w
Constraints:
range: 500-8000
range: -1--1
 .1.3.6.1.4.1.2011.6.38.1.1.1.11
hwSdhTrivc12ClockMode
Type of clock mode.
Options:
1. system(1) -system clock
2. line(2) -line clock
3. recovery(3) -recovery clock
4. invalid(-1) -invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1system
2line
3recovery
 .1.3.6.1.4.1.2011.6.38.1.1.1.12
hwSdhTrivc12RTPSwitch
Status of RTP switch.
Options:
1. enable(1) -status of RTP switch is enable
2. disable(2) -status of RTP switch is disable
3. invalid(-1) -invalid value
Default: enable(1)
Enumerationr/w
Enumerated Values:
-1invalid
1enable
2disable
 .1.3.6.1.4.1.2011.6.38.1.1.1.13
hwSdhTriOvhdRecvJ2CheckSwitch
Indicates the check switch of SDH overhead command J2.
Options:
1. enable(1) -indicates that SDH overhead command J2 to be checked.
2. disable(2) -indicates that SDH overhead command J2 not to be checked.
Default:…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.38.1.1.1.14

hwAlarmLevelTable

table
.1.3.6.1.4.1.2011.6.38.1.2 · 1 row entry · 1 columns
Open in standard view 
This table is used for the MSU alarm level management,
such as the alarm level of MSU. 
The indexes of this table are hwFrameIndex, hwSlotIndex.
hwAlarmLevelEntry entry .1.3.6.1.4.1.2011.6.38.1.2.1
This table is used for the MSU alarm level management,
such as the alarm level of MSU.
The indexes of this entry are hwFrameIndex, hwSlotIndex.
Indexes
HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex
Column Syntax OID
hwSdhAlarmLevel
The alarm level of MSU.
Options:
1. critical(1) -critical alarm can be reported
2. major(2) -major or critical alarm can be reported
3. minor(3) -minor or major or critical alarm can be repor…
Enumerationr/w
Enumerated Values:
1critical
2major
3minor
4warning
5disable
 .1.3.6.1.4.1.2011.6.38.1.2.1.1

hwSdhGroupPerformCountTable

table
.1.3.6.1.4.1.2011.6.38.1.3 · 1 row entry · 15 columns
Open in standard view 
This table is used for the STM-1 port performance information management. 
The index of this table is ifIndex.
hwSdhGroupPerformCountEntry entry .1.3.6.1.4.1.2011.6.38.1.3.1
This table is used for the STM-1 port performance information management.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwSdhGroupPerfOOFCount
Number of out of frame.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.1
hwSdhGroupPerfB1CNTCount
Bit Error number of B1.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.2
hwSdhGroupPerfB1BCNTCount
Block Error number of B1.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.3
hwSdhGroupPerfB2CNTCount
Bit Error number of B2.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.4
hwSdhGroupPerfLFEBECount
Multiplex Section Far-end Bit Errorred number.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.5
hwSdhGroupPerfPPJECount
Positive justification event of AU pointer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.6
hwSdhGroupPerfNPJECount
Negative justification event of AU pointer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.7
hwSdhGroupPerfNDFCount
New data flag of AU pointer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.8
hwSdhGroupPerfRSESCount
Regenerator Section Errorred Second.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.9
hwSdhGroupPerfMSESCount
Multiplex Section Errorred Second.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.10
hwSdhGroupPerfMSFEESCount
Multiplex Section Far-end Errorred Second.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.11
hwSdhGroupPerfHPESCount
Higher Path Errorred Second.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.12
hwSdhGroupPerfHPFEESCount
Higher Path Far-End Errorred Second.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.13
hwSdhGroupPerfB3CNTCount
Bit Error number of B3.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.14
hwSdhGroupPerfPFEBECount
Path Far-end bit error number.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.3.1.15

hwSdhTributaryPerformCountTable

table
.1.3.6.1.4.1.2011.6.38.1.4 · 1 row entry · 2 columns
Open in standard view 
This table is used for the vc12 tributary performance information management.
The index of this table is ifIndex.
hwSdhTributaryPerformCountEntry entry .1.3.6.1.4.1.2011.6.38.1.4.1
This table is used for the vc12 tributary performance information management.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwSdhTriPerfLPESCount
Low Path Errored Second.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.4.1.1
hwSdhTriPerfLPFEESCount
Low Path Far-end Errored Second.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.38.1.4.1.2