hwSdhTriAlarmState
HUAWEI-MSU-MIB ·
.1.3.6.1.4.1.2011.6.38.1.1.1.7
Object
column
SNMPv2-SMIInteger32
The SDH tributary unit alarm state, per bit indicates one kind of alarm, 1 means exist; 0 means not exist. 0xFFFFFFFF,means invalid value bit0 = TU-AIS Alarm Indication Signal in Tributary Unit bit1 = TU-LOP Loss of pointer in tributary unit bit2 = LP-UNEQ Lower order Path UnEquipped bit3 = LP-SLM PayLoad Mismatch in Lower order Path bit4 = LP-TIM Trace Identifier Mismatch in Lower order Path bit5 = LP-RFI Remote Failure Indication in Lower order Path bit6 = LP-RDI Remote Defect Indication in Lower order Path bit7 = SIZZEERR Pointer Size Error in Lower order Path others, no used, reserve to 0
Context
- MIB
- HUAWEI-MSU-MIB
- OID
.1.3.6.1.4.1.2011.6.38.1.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwSdhTributaryEntry
- Table
- hwSdhTributaryTable
- Siblings
- 13
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSdhTriLoopType Type of the loopback test on the MSU SDH tributary.
Options:
1. noLoop(1) -no loopback
2. localLoop(2) -local loopback
3. remoteLoop(3) -remote loopback | column | Enumeration | .1.3.6.1.4.1.2011.6.38.1.1.1.1 |
| hwSdhTrivc12AlarmState The SDH tributary unit alarm state, per bit indicates one kind of alarm, 1 means exist 0 means not exist.
0xFFFFFFFF,means invalid value
bit0 = AIS Remote Alarm Ind… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.38.1.1.1.10 |
| hwSdhTrivc12JitterBuffer Value of JitterBuffer, must be multiple of 125.
Unit: us | column | Integer32 | .1.3.6.1.4.1.2011.6.38.1.1.1.11 |
| hwSdhTrivc12ClockMode Type of clock mode.
Options:
1. system(1) -system clock
2. line(2) -line clock
3. recovery(3) -recovery clock
4. invalid(-1) -invalid value | column | Enumeration | .1.3.6.1.4.1.2011.6.38.1.1.1.12 |
| hwSdhTrivc12RTPSwitch Status of RTP switch.
Options:
1. enable(1) -status of RTP switch is enable
2. disable(2) -status of RTP switch is disable
3. invalid(-1) -invalid value
Default: en… | column | Enumeration | .1.3.6.1.4.1.2011.6.38.1.1.1.13 |
| hwSdhTriOvhdRecvJ2CheckSwitch Indicates the check switch of SDH overhead command J2.
Options:
1. enable(1) -indicates that SDH overhead command J2 to be checked.
2. disable(2) -indicates that SDH overhea… | column | Enumeration | .1.3.6.1.4.1.2011.6.38.1.1.1.14 |
| hwSdhTriOvhdSendJ2String Send character string of the SDH overhead command J2. | column | OctetString | .1.3.6.1.4.1.2011.6.38.1.1.1.2 |
| hwSdhTriOvhdRecvJ2String Receive character string of the SDH overhead command J2. | column | OctetString | .1.3.6.1.4.1.2011.6.38.1.1.1.3 |
| hwSdhTriOvhdSendV5Value Send value of SDH overhead command word V5. | column | Integer32 | .1.3.6.1.4.1.2011.6.38.1.1.1.4 |
| hwSdhTriOvhdRecvedJ2 Receive character string of the SDH overhead command J2. | column | OctetString | .1.3.6.1.4.1.2011.6.38.1.1.1.5 |
| hwSdhTriOvhdRecvedV5 Receive value of the SDH overhead command word V5. | column | Integer32 | .1.3.6.1.4.1.2011.6.38.1.1.1.6 |
| hwSdhTrivc12channlesstate The SDH tributary unit path state.
Options:
1. distributed(1) -the SDH tributary unit path state is distributed
2. nondistributive(2) -the SDH tributary unit path state is n… | column | Enumeration | .1.3.6.1.4.1.2011.6.38.1.1.1.8 |
| hwSdhTriPerfAdminStatus The operation of the performance on the port.
Options:
1. reset(1) -the operation of the performance on the port is reset
2. invalid(-1) -invalid value | column | Enumeration | .1.3.6.1.4.1.2011.6.38.1.1.1.9 |