HUAWEI-MPLS-LDP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
92

hwMplsLdpLsrIncarnTable

table
.1.3.6.1.4.1.2011.5.12.2.1.1.1 · 1 row entry · 21 columns
Open in standard view 
MPLS provides support for multiple incarnations of the 
MPLS Stack in a target. The LSR defined in the standard <IETF
DRAFT> MIB is treated as an incarnation in this MIB. Using a
local policy the Network administrator must group the LDP Entities
that should be placed in an incarnation.
hwMplsLdpLsrIncarnEntry entry .1.3.6.1.4.1.2011.5.12.2.1.1.1.1
An entry in this table represents an LSR incarnation.
All the entries in this table are created initially when the
LDP is initiated. The row status of each entry will be in
'notInService' state initially. The row stat…
Indexes
hwMplsLdpLsrIncarnID
Column Syntax OID
hwMplsLdpLsrID
The LSR's Identifier.
MplsLsrIdentifierr/w
Textual Convention: MplsLsrIdentifier OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.1
hwMplsLdpLsrLoopDetectionPresent
A indication of whether this LSR supports loop detection. A
value of 'true' indicates this LSR does support loop detection.
A value of 'false' indicates this LSR does not support
loop detection.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.2
hwMplsLdpLsrLoopDetectionAdminStatus
To enable loop detection the value of this object should be
'enabled(1)'. Otherwise, to turn off loop detection, set this
value to 'disabled(2)'.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.3
hwMplsLdpLsrPathVectorLimit
This object only has meaning if hwMplsLdpLsrLoopDetectionPresent
has the value of 'true'.

The value of this object represents the limit of path vectors which
this LSR uses to treat the message as if it h…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.4
hwMplsLdpLsrHopCountLimit
This object only has meaning if hwMplsLdpLsrLoopDetectionPresent
has the value of 'true'.

The value of this object represents the limit on the Hop Count
which this LSR uses to treat the message as if it…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.5
hwMplsLdpLsrLoopPreventionPresent
A indication of whether this LSR supports loop prevention. A
value of 'true' indicates this LSR does support loop prevention.
A value of 'false' indicates this LSR does not support loop
prevention.

C…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.6
hwMplsLdpLsrLoopPreventionAdminStatus
To enable loop prevention the value of this object should be
'enabled(1)'. Otherwise, to turn off loop prevention, set this
value to 'disabled(2)'.

Current release of MPLS does not provide support to a…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.7
hwMplsLdpLsrLabelRetentionMode
The LSR can be configured to use either conservative or liberal
label retention mode.

If the value of this object is conservative(1) then advertized
label mappings are retained only if they will be used…
Enumerationr/w
Enumerated Values:
1conservative
2liberal
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.8
hwMplsLdpLsrIncarnID
The incarnation acts as index to all the elements in this
table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.9
hwMplsLdpLsrMaxLdpEntities
The maximum number of LDP entities that can be supported by this
Incarnation.
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.10
hwMplsLdpLsrMaxLocalPeers
The maximum number of Local LDP peers that can be supported by
this Incarnation.
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.11
hwMplsLdpLsrMaxRemotePeers
The maximum number of Remote LDP peers that can be supported by
this Incarnation.
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.12
hwMplsLdpLsrMaxIfaces
The maximum number of Label enabled Interfaces that can be
supported by this Incarnation.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.13
hwMplsLdpLsrMaxLsps
The maximum number of Label Switched Paths that can be
supported by this Incarnation.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.14
hwMplsLdpLsrMaxCrlspTnls
The maximum number of CRLSPs that can be supported by this
Incarnation.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.15
hwMplsLdpLsrMaxErhopPerCrlspTnl
The maximum number of ER-Hops that can be supported in a
CRLSP tunnel.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.16
hwMplsLdpLsrRowStatus
An object that allows entries in this table to
be created and deleted using the
RowStatus convention.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.17
hwMplsLdpLsrMaxVcmCapability SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.18
hwMplsLdpLsrVcmPathVecInAllLblMapPresent SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.19
hwMplsLdpLsrRequestRetrytimerValue SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.20
hwMplsLdpLsrNumOfRequestRetryAttempts SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.21

hwMplsLdpEntityTable

table
.1.3.6.1.4.1.2011.5.12.2.1.2.1 · 1 row entry · 16 columns
Open in standard view 
This table contains information about the
MPLS Label Distribution Protocol Entities which
exist on this Label Switch Router (LSR).
hwMplsLdpEntityEntry entry .1.3.6.1.4.1.2011.5.12.2.1.2.1.1
An entry in this table represents an LDP entity.
An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.

An LPD Entity is uniquely indexed by its LPD
Identifier.
Indexes
hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex
Column Syntax OID
hwMplsLdpEntityID
The LDP identifier which uniquely identifies
the LDP Entity. This is s six octet quantity
which is used to identify an Label Switch Router
(LSR) label space.

The first four octets encode an IP address
as…
MplsLdpIdentifier
Textual Convention: MplsLdpIdentifier OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.1
hwMplsLdpEntityLabelSpaceType
The type of label spaces associated with this
LDP Entity. The values are

'unknown(1)' The type of label space is
not known.

'perInterface(2)' The type…
Enumerationr/w
Enumerated Values:
1unknown
2perInterface
3perPlatform
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.2
hwMplsLdpEntityDefVpi
The Default VPI value used in the label for the default
VPI.
AtmVpIdentifierr/w
Textual Convention: AtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.3
hwMplsLdpEntityDefVci
The Default VCI value used in the label for the default
VCI.
AtmVcIdentifierr/w
Textual Convention: AtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.4
hwMplsLdpEntityUnlabTrafVpi
VPI value of the VCC supporting unlabeled traffic.
AtmVpIdentifierr/w
Textual Convention: AtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.5
hwMplsLdpEntityUnlabTrafVci
VCI value of the VCC supporting unlabeled traffic.
AtmVcIdentifierr/w
Textual Convention: AtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.6
hwMplsLdpEntityMergeCapability
Sets the merge capability for this LDP entity.

Current Release of MPLS does not provide support for
any kind of Merge.
Enumerationr/w
Enumerated Values:
0noMerge
1vpMerge
2vcMerge
3vpVcMerge
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.7
hwMplsLdpEntityVcDirectionality
Sets the VC directionality for this LDP entity.
Enumerationr/w
Enumerated Values:
1bidirectional
2unidirectional
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.8
hwMplsLdpEntityWellKnownDiscoveryPort
The well known LDP Discovery Port.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.9
hwMplsLdpEntityMtu
The maximum transmission unit (MTU) that was configured
for this entity.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.10
hwMplsLdpEntityKeepAliveHoldTimer
The two octet value which is the proposed keep alive hold
timer for this LDP Entity.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.11
hwMplsLdpEntityFailedInitSessionThreshold
When attempting to establish a session with a
given Peer, the given LDP Entity should
send out a notification when exceeding this threshold.
A value of 0 (zero) for this object
indicates that the threshold is infinity.
…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.12
hwMplsLdpEntityLabelDistributionMethod
For any given LDP session, the method of
label distribution must be specified.

Current release of MPLS does not provide support for
'downstreamUnsolicited'.
Enumerationr/w
Enumerated Values:
1downstreamOnDemand
2downstreamUnsolicited
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.13
hwMplsLdpEntityLabelAllocationMethod
For any given LDP session, the method of
label allocation must be specified. Label can be allocated
in either ordered mode or in the independent mode.
Enumerationr/w
Enumerated Values:
1ordered
2independent
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.14
hwMplsLdpEntityHelloHoldTimer
The two octet value which is the proposed hello hold
timer for this LDP Entity.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.15
hwMplsLdpEntityRowStatus
An object that allows entries in this table to
be created and deleted using the
RowStatus convention.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.12.2.1.2.1.1.16

hwMplsLdpEntityIfTable

table
.1.3.6.1.4.1.2011.5.12.2.1.2.2 · 1 row entry · 3 columns
Open in standard view 
This table contains information about the
interfaces that are associated with an LDP Entity.
There should be atleast one interface associated with
each LDP Entity. If the LDP Entity supports 'per interface
based label space' label type then, atmost one interface can be 
associated with the LDP entity. If the LDP Entity supports
'per platform based label space' label type then, more than one
interface can be associated with the LDP Entity.
hwMplsLdpEntityIfEntry entry .1.3.6.1.4.1.2011.5.12.2.1.2.2.1
An entry in this table represents an Interface that is
associated with a LDP entity.

An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.

An interface (r…
Indexes
hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex
Column Syntax OID
hwMplsLdpEntityIfIndex
Identifier that uniquely identifies the Interface with
respect to an LDP Entity.

The ifIndex value corresponds to the IfIndex value of the
MIB-II
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.5.12.2.1.2.2.1.1
hwMplsLdpEntityIfIpv4Address
The IPv4 address associated with the interface.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.12.2.1.2.2.1.2
hwMplsLdpEntityIfRowStatus
An object that allows entries in this table to
be created and deleted using the
RowStatus convention.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.12.2.1.2.2.1.3

hwMplsLdpEntityConfAtmLabelRangeTable

table
.1.3.6.1.4.1.2011.5.12.2.1.2.3 · 1 row entry · 5 columns
Open in standard view 
The MPLS LDP Entity Configurable ATM Label Range Table.
The purpose of this table is to provide a mechanism
for specifying a contiguous range of vpi's
with a contiguous range of vci's, or a 'label range'
for LDP Entities.
          
LDP Entities which use ATM must have at least one
entry in this table.
hwMplsLdpEntityConfAtmLabelRangeEntry entry .1.3.6.1.4.1.2011.5.12.2.1.2.3.1
A row in the LDP Entity Configurable ATM Label
Range Table. One entry in this table contains
information on a single range of labels
represented by the configured Upper and Lower
Bounds VPI/VCI pairs.
NOTE: The ranges…
Indexes
hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex hwMplsLdpEntityConfAtmLabelRangeLowerBoundVPI hwMplsLdpEntityConfAtmLabelRangeLowerBoundVCI
Column Syntax OID
hwMplsLdpEntityConfAtmLabelRangeLowerBoundVPI
The minimum VPI number configured for this range.
AtmVpIdentifier
Textual Convention: AtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.12.2.1.2.3.1.1
hwMplsLdpEntityConfAtmLabelRangeLowerBoundVCI
The minimum VCI number configured for this range.
AtmVcIdentifier
Textual Convention: AtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.12.2.1.2.3.1.2
hwMplsLdpEntityConfAtmLabelRangeUpperBoundVPI
The maximum VPI number configured for this range.
AtmVpIdentifierr/w
Textual Convention: AtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.12.2.1.2.3.1.3
hwMplsLdpEntityConfAtmLabelRangeUpperBoundVCI
The maximum VCI number configured for this range.
AtmVcIdentifierr/w
Textual Convention: AtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.12.2.1.2.3.1.4
hwMplsLdpEntityConfAtmLabelRangeRowStatus
An object that allows entries in this
table to be created and deleted using
the RowStatus convention.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.12.2.1.2.3.1.5

hwMplsLdpEntityStatsTable

table
.1.3.6.1.4.1.2011.5.12.2.1.2.4 · 1 row entry · 1 columns
Open in standard view 
This table is a read-only table which augments
the MplsLdpConfEntityTable.  The purpose of this
table is to keep statistical information about
the LDP Entities on the LSR.
hwMplsLdpEntityStatsEntry entry .1.3.6.1.4.1.2011.5.12.2.1.2.4.1
A row in this table contains statistical information
about an LDP Entity.
Indexes
No indexes recorded
Column Syntax OID
hwMplsLdpAttemptedSessions
A count of the total attempted sessions for
this LDP Entity.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.12.2.1.2.4.1.1

hwMplsLdpPeerTable

table
.1.3.6.1.4.1.2011.5.12.2.1.3.1 · 1 row entry · 9 columns
Open in standard view 
Information about LDP peers which have been discovered
by the LDP Entities that are managed by this agent.
hwMplsLdpPeerEntry entry .1.3.6.1.4.1.2011.5.12.2.1.3.1.1
Information about a single Peer.
Indexes
hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex hwMplsLdpPeerIndex
Column Syntax OID
hwMplsLdpPeerIndex
An identifier for the LDP peer that is unique within the
scope of this agent.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.5.12.2.1.3.1.1.1
hwMplsLdpPeerID
The LDP identifier of this LDP Peer.
MplsLdpIdentifierr/w
Textual Convention: MplsLdpIdentifier OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.12.2.1.3.1.1.2
hwMplsLdpPeerInternetworkAddrType
The type of the internetwork layer address of this
LDP peer. This object indicates how the value of
hwMplsLdpPeerInternetworkAddr is to be interpreted.
AddressFamilyNumbersr/w
Textual Convention: AddressFamilyNumbers Enumeration
Type Values:
0other
1ipv4
2ipv6
3nsap
4hdlc
5bbn1822
6ieee802
7e163
8e164
9f69
10x121
11ipx
12appleTalk
13decnetIV
14banyanVines
15e164WithNsap
 .1.3.6.1.4.1.2011.5.12.2.1.3.1.1.3
hwMplsLdpPeerInternetworkAddr
The value of the internetwork layer address of this LDP peer.
MplsLdpGenAddrr/w
Textual Convention: MplsLdpGenAddr OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.2011.5.12.2.1.3.1.1.4
hwMplsLdpPeerDefaultMtu
The default maximum transmission unit (MTU) of the
LDP Peer.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.12.2.1.3.1.1.5
hwMplsLdpPeerKeepAliveHoldTimer
The two octet unsigned non zero INTEGER that indicates
the number of seconds that this Peer proposes for the
value of the KeepAlive Interval.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.12.2.1.3.1.1.6
hwMplsLdpPeerLabelDistributionMethod
For any given LDP session, the method of
label distribution must be specified.
Enumerationr/w
Enumerated Values:
1downstreamOnDemand
2downstreamUnsolicited
 .1.3.6.1.4.1.2011.5.12.2.1.3.1.1.7
hwMplsLdpPeerType
Indicates whether a peer is a local peer or a remote peer
Enumerationr/w
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.2011.5.12.2.1.3.1.1.8
hwMplsLdpPeerRowStatus
An object that allows entries in this table to be created
and deleted using the RowStatus convention.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.12.2.1.3.1.1.9

hwMplsLdpPeerConfAtmLabelRangeTable

table
.1.3.6.1.4.1.2011.5.12.2.1.3.2 · 1 row entry · 4 columns
Open in standard view 
The MPLS LDP Peer Configurable ATM Label Range Table.
The purpose of this table is to provide a mechanism
for specifying a contiguous range of vpi's with a contiguous
range of vci's, or a 'label range' for LDP Peers.
LDP Peers which use ATM must have at least one
entry in this table.
hwMplsLdpPeerConfAtmLabelRangeEntry entry .1.3.6.1.4.1.2011.5.12.2.1.3.2.1
A row in the LDP Peer Configurable ATM Label Range Table.
One entry in this table contains information
on a single range of labels represented by
the configured Upper and Lower Bounds VPI/VCI pairs.

NOTE: …
Indexes
hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex hwMplsLdpPeerIndex hwMplsLdpPeerConfAtmLabelRangeLowerBoundVPI hwMplsLdpPeerConfAtmLabelRangeLowerBoundVCI
Column Syntax OID
hwMplsLdpPeerConfAtmLabelRangeLowerBoundVPI
The minimum VPI number configured for this range.
AtmVpIdentifier
Textual Convention: AtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.12.2.1.3.2.1.1
hwMplsLdpPeerConfAtmLabelRangeLowerBoundVCI
The minimum VCI number configured for this range.
AtmVcIdentifier
Textual Convention: AtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.12.2.1.3.2.1.2
hwMplsLdpPeerConfAtmLabelRangeUpperBoundVPI
The maximum VPI number configured for this range.
AtmVpIdentifier
Textual Convention: AtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.12.2.1.3.2.1.3
hwMplsLdpPeerConfAtmLabelRangeUpperBoundVCI
The maximum VCI number configured for this range.
AtmVcIdentifier
Textual Convention: AtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.12.2.1.3.2.1.4

hwMplsLdpSessionTable

table
.1.3.6.1.4.1.2011.5.12.2.1.4.1 · 1 row entry · 10 columns
Open in standard view 
A table of Sessions between the LDP Entities and
LDP Peers.
hwMplsLdpSessionEntry entry .1.3.6.1.4.1.2011.5.12.2.1.4.1.1
An entry in this table represents information on a
single session between an LDP Entity and LDP Peer.
Indexes
hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex hwMplsLdpPeerIndex hwMplsLdpSessionIndex
Column Syntax OID
hwMplsLdpSessionIndex
An unique identifier for this entry such that it
identifies a specific LDP Session.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.5.12.2.1.4.1.1.1
hwMplsLdpSessionID
The LDP Session identifier.
MplsLdpIdentifier
Textual Convention: MplsLdpIdentifier OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.12.2.1.4.1.1.2
hwMplsLdpSessionProtocolVersion
The version of the LDP Protocol which
this session is using.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.12.2.1.4.1.1.3
hwMplsLdpSessionKeepAliveHoldTimeRemaining
The keep alive hold time remaining for this session.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.4.1.1.4
hwMplsLdpSessionRole
An indication of whether the LDP Entity associated with
this session is acting in an 'active' role or
a 'passive' role.
Enumeration
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.2011.5.12.2.1.4.1.1.5
hwMplsLdpSessionState
The current state of the session, all of the
states 1 - 5 are based on the state machine for
session negotiation behavior.
Enumeration
Enumerated Values:
1nonexistent
2initialized
3openrec
4opensent
5operational
 .1.3.6.1.4.1.2011.5.12.2.1.4.1.1.6
hwMplsLdpSessionAtmLabelRangeLowerBoundVPI
The minimum VPI number for this range.
AtmVpIdentifier
Textual Convention: AtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.12.2.1.4.1.1.7
hwMplsLdpSessionAtmLabelRangeLowerBoundVCI
The minimum VCI number for this range.
AtmVcIdentifier
Textual Convention: AtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.12.2.1.4.1.1.8
hwMplsLdpSessionAtmLabelRangeUpperBoundVPI
The maximum VPI number for this range.
AtmVpIdentifier
Textual Convention: AtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.12.2.1.4.1.1.9
hwMplsLdpSessionAtmLabelRangeUpperBoundVCI
The maximum VCI number for this range.
AtmVcIdentifier
Textual Convention: AtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.12.2.1.4.1.1.10

hwMplsLdpHelloAdjacencyTable

table
.1.3.6.1.4.1.2011.5.12.2.1.5.1 · 1 row entry · 2 columns
Open in standard view 
A table of Hello Adjacencies for Sessions.
hwMplsLdpHelloAdjacencyEntry entry .1.3.6.1.4.1.2011.5.12.2.1.5.1.1
Each row represents a single LDP Hello Adjacency.
An LDP Session can have one or more Hello adjacencies.
Indexes
hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex hwMplsLdpPeerIndex hwMplsLdpSessionIndex hwMplsLdpHelloAdjacencyIndex
Column Syntax OID
hwMplsLdpHelloAdjacencyIndex
An identifier for the adjacency.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.5.12.2.1.5.1.1.1
hwMplsLdpHelloAdjacencyHoldTimeRemaining
The time remaining for this Hello Adjacency.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.5.1.1.2

hwMplsLdpCrlspTnlTable

table
.1.3.6.1.4.1.2011.5.12.2.1.6.1 · 1 row entry · 15 columns
Open in standard view 
The hwMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels
to be created. The ER hops associated with a CRLSP tunnel
are to be configured using the hwMplsLdpCrlspErHopTable.
hwMplsLdpCrlspTnlEntry entry .1.3.6.1.4.1.2011.5.12.2.1.6.1.1
An entry in this table represents an CRLSP MPLS tunnel.
An entry can be created by a network administrator.
Indexes
hwMplsLdpLsrIncarnID hwMplsLdpCrlspTnlIndex
Column Syntax OID
hwMplsLdpCrlspTnlIndex
Uniquely identifies this row.
MplsTunnelIndex
Textual Convention: MplsTunnelIndex Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.1
hwMplsLdpCrlspTnlName
The 'canonical' name assigned to the tunnel that can
be used to refer to it on the 'console' port.
DisplayStringr/w
Textual Convention: DisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.2
hwMplsLdpCrlspTnlDirection
Whether this tunnel is unidirectional-incoming,
unidirectional-outgoing, or bidirectional.
Enumerationr/w
Enumerated Values:
1in
2out
3inOut
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.3
hwMplsLdpCrlspTnlSignallingProto
The signaling protocol, if any, that set up this
tunnel.
Enumerationr/w
Enumerated Values:
1none
2ldp
3rsvp
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.4
hwMplsLdpCrlspTnlSetupPrio
The setup priority of this tunnel.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.5
hwMplsLdpCrlspTnlHoldingPrio
The holding priority for this tunnel.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.6
hwMplsLdpCrlspTnlPeakDataRate
The peak rate - the maximum rate at which traffic will be sent on the
CRLSP.
bits per secondBitRater/w
Textual Convention: BitRate Integer32
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.7
hwMplsLdpCrlspTnlPeakBurstSize
The peak burst size - the maximum burst size of the traffic that can
occur in the established CRLSP.
bytesBurstSizer/w
Textual Convention: BurstSize Integer32
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.8
hwMplsLdpCrlspTnlCommittedDataRate
The committed rate - the committed rate at which traffic will be sent on the
CRLSP.
bits per secondBitRater/w
Textual Convention: BitRate Integer32
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.9
hwMplsLdpCrlspTnlCommittedBurstSize
The committed burst size - the committed burst size of the traffic
that will be handled in the established CRLSP.
bytesBurstSizer/w
Textual Convention: BurstSize Integer32
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.10
hwMplsLdpCrlspTnlExcessBurstSize
The Excess burst size - the excess burst size limit to be used
for traffic conditioning at the ingress of the CRLSP.
bytesBurstSizer/w
Textual Convention: BurstSize Integer32
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.11
hwMplsLdpCrlspTnlIsPinned
Indicates whether the loose-routed hops of this
tunnel are to be pinned.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.12
hwMplsLdpCrlspTnlFrequency
Indicates the frequency of usage of the established CRLSP.
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.13
hwMplsLdpCrlspTnlWeight
Indicates the weight that is the established CRLSP.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.14
hwMplsLdpCrlspTnlRowStatus
For controlling the state of this row.
The status can be set to 'active' only when atleast one ERHOP
is created in the hwMplsLdpErHopTable, associated with this
tunnel.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.12.2.1.6.1.1.15

hwMplsLdpCrlspErHopTable

table
.1.3.6.1.4.1.2011.5.12.2.1.6.2 · 1 row entry · 6 columns
Open in standard view 
The hwMplsLdpCrlspErHopTable is used to indicate the hops,
strict  or  loose,  for an MPLS  CRLSP tunnel  defined  in
hwMplsLdpCrlspTnlTable. 
          
There must be atleast one entry in this table for each CRLSP tunnel 
that is supported in the hwMplsLdpCrlspTnlTable.
          
The first row in the table  is  the
first hop after the origination point of the tunnel.
hwMplsLdpCrlspErHopEntry entry .1.3.6.1.4.1.2011.5.12.2.1.6.2.1
An entry in this table represents a tunnel hop. An
entry is created by a network administrator for
signalled ERLSP set up by LDP or RSVP.
Indexes
hwMplsLdpLsrIncarnID hwMplsLdpCrlspTnlIndex hwMplsLdpCrlspErHopIndex
Column Syntax OID
hwMplsLdpCrlspErHopIndex
Secondary index into this table identifying the
particular hop.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.12.2.1.6.2.1.1
hwMplsLdpCrlspErHopAddrType
Address type of this hop.
Enumerationr/w
Enumerated Values:
1ipV4
 .1.3.6.1.4.1.2011.5.12.2.1.6.2.1.2
hwMplsLdpCrlspErHopIpv4Addr
If hwMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of
this hop. This object is not significant otherwise
and should return a value of 0.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.12.2.1.6.2.1.3
hwMplsLdpCrlspErHopIpv4PrefixLen
If hwMplsLdpCrlspErHopAddrType is ipV4(1), prefix length
for this hop's IPv4 address. This object is not
significant otherwise and should return a value of
0.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.5.12.2.1.6.2.1.4
hwMplsLdpCrlspErHopStrictOrLoose
Whether this is a strict or loose hop.
Enumerationr/w
Enumerated Values:
1strict
2loose
 .1.3.6.1.4.1.2011.5.12.2.1.6.2.1.5
hwMplsLdpCrlspErHopRowStatus
For creating, modifying and deleting this row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.12.2.1.6.2.1.6