hwMplsLdpLsrLabelRetentionMode
HUAWEI-MPLS-LDP-MIB ·
.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.8
Object
column
r/w
Enumeration
The LSR can be configured to use either conservative or liberal
label retention mode.
If the value of this object is conservative(1) then advertized
label mappings are retained only if they will be used to forward
packets, i.e. if label came from a valid next hop. If the value of
this object is liberal(2) then all advertized label mappings are
retained whether they are from a valid next hop or not.
Current release of MPLS does not provide support to assign
this MIB object with a value 'liberal'.
Context
- MIB
- HUAWEI-MPLS-LDP-MIB
- OID
.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwMplsLdpLsrIncarnEntry
- Table
- hwMplsLdpLsrIncarnTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | conservative |
2 | liberal |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsLdpLsrID The LSR's Identifier. | column | MplsLsrIdentifier | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.1 |
| hwMplsLdpLsrMaxLdpEntities The maximum number of LDP entities that can be supported by this
Incarnation. | column | Integer32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.10 |
| hwMplsLdpLsrMaxLocalPeers The maximum number of Local LDP peers that can be supported by
this Incarnation. | column | Integer32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.11 |
| hwMplsLdpLsrMaxRemotePeers The maximum number of Remote LDP peers that can be supported by
this Incarnation. | column | Integer32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.12 |
| hwMplsLdpLsrMaxIfaces The maximum number of Label enabled Interfaces that can be
supported by this Incarnation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.13 |
| hwMplsLdpLsrMaxLsps The maximum number of Label Switched Paths that can be
supported by this Incarnation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.14 |
| hwMplsLdpLsrMaxCrlspTnls The maximum number of CRLSPs that can be supported by this
Incarnation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.15 |
| hwMplsLdpLsrMaxErhopPerCrlspTnl The maximum number of ER-Hops that can be supported in a
CRLSP tunnel. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.16 |
| hwMplsLdpLsrRowStatus An object that allows entries in this table to
be created and deleted using the
RowStatus convention. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.17 |
| hwMplsLdpLsrMaxVcmCapability | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.18 |
| hwMplsLdpLsrVcmPathVecInAllLblMapPresent | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.19 |
| hwMplsLdpLsrLoopDetectionPresent A indication of whether this LSR supports loop detection. A
value of 'true' indicates this LSR does support loop detection.
A value of 'false' indicates this LSR does not supp… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.2 |
| hwMplsLdpLsrRequestRetrytimerValue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.20 |
| hwMplsLdpLsrNumOfRequestRetryAttempts | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.21 |
| hwMplsLdpLsrLoopDetectionAdminStatus To enable loop detection the value of this object should be
'enabled(1)'. Otherwise, to turn off loop detection, set this
value to 'disabled(2)'. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.3 |
| hwMplsLdpLsrPathVectorLimit This object only has meaning if hwMplsLdpLsrLoopDetectionPresent
has the value of 'true'.
The value of this object represents the limit of path vectors which
this … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.4 |
| hwMplsLdpLsrHopCountLimit This object only has meaning if hwMplsLdpLsrLoopDetectionPresent
has the value of 'true'.
The value of this object represents the limit on the Hop Count
which thi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.5 |
| hwMplsLdpLsrLoopPreventionPresent A indication of whether this LSR supports loop prevention. A
value of 'true' indicates this LSR does support loop prevention.
A value of 'false' indicates this LSR does not su… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.6 |
| hwMplsLdpLsrLoopPreventionAdminStatus To enable loop prevention the value of this object should be
'enabled(1)'. Otherwise, to turn off loop prevention, set this
value to 'disabled(2)'.
Current relea… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.7 |
| hwMplsLdpLsrIncarnID The incarnation acts as index to all the elements in this
table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.12.2.1.1.1.1.9 |