hwImaGroupRxTimingRefLink

HUAWEI-IMA-MIB · .1.3.6.1.4.1.2011.5.25.176.1.1.1.8
MIB view Table view

Object

column IF-MIBInterfaceIndexOrZero 
The ifIndex of the receive timing reference link to be
used by near-end for IMA data cell clock recovery toward
the ATM layer. The distinguished value of zero may be used
if no link has been configured in the IMA group, or if the
receive timing reference link has not yet been detected.

Context

MIB
HUAWEI-IMA-MIB
OID
.1.3.6.1.4.1.2011.5.25.176.1.1.1.8
Type
column
Access
readonly
Status
current
Parent
hwImaGroupEntry
Table
hwImaGroupTable
Siblings
23

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32

Values & Constraints

Type Constraints
range: 0..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwImaGroupIfIndex
This object identifies the logical interface number ('ifIndex') assigned to this IMA group, and is used to identify corresponding rows in the Interfaces MIB. Note that re-initiali…
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2011.5.25.176.1.1.1.1
hwImaGroupRxImaId
The IMA ID currently in use by the far-end IMA function.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.10
hwImaGroupTxFrameLength
The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup.
columnImaFrameLength.1.3.6.1.4.1.2011.5.25.176.1.1.1.11
hwImaGroupRxFrameLength
Value of IMA frame length as received from remote IMA function.
columnImaFrameLength.1.3.6.1.4.1.2011.5.25.176.1.1.1.12
hwImaGroupDiffDelayMax
The maximum number of milliseconds of differential delay among the links that will be tolerated on this interface.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.13
hwImaGroupAlphaValue
This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.14
hwImaGroupBetaValue
This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.15
hwImaGroupGammaValue
This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA Sync state from the IMA PreSync state.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.16
hwImaGroupNumTxActLinks
The number of links which are configured to transmit and are currently Active in this IMA group.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.176.1.1.1.17
hwImaGroupNumRxActLinks
The number of links which are configured to receive and are currently Active in this IMA group.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.176.1.1.1.18
hwImaGroupTxOamLabelValue
IMA OAM Label value transmitted by the NE IMA unit.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.19
hwImaGroupNeState
The current operational state of the near-end IMA Group State Machine.
columnImaGroupState.1.3.6.1.4.1.2011.5.25.176.1.1.1.2
hwImaGroupRxOamLabelValue
IMA OAM Label value transmitted by the FE IMA unit. The value 0 likely means that the IMA unit has not received an OAM Label from the FE IMA unit at this time.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.20
hwImaGroupFirstLinkIfIndex
This object identifies the first link of this IMA Group.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2011.5.25.176.1.1.1.21
hwImaGroupName
The name of interface ImaGroup.
columnOctetString.1.3.6.1.4.1.2011.5.25.176.1.1.1.22
hwImaGroupTxClock
The clock mode to be used by the IMA group in the transmit direction.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.23
hwImaGroupRxClock
Mode of IMA clock as received from remote IMA function.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.24
hwImaGroupFeState
The current operational state of the far-end IMA Group State Machine.
columnImaGroupState.1.3.6.1.4.1.2011.5.25.176.1.1.1.3
hwImaGroupSymmetry
Symmetry of the IMA group.
columnImaGroupSymmetry.1.3.6.1.4.1.2011.5.25.176.1.1.1.4
hwImaGroupMinNumTxLinks
Minimum number of transmit links required to be Active for the IMA group to be in the Operational state.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.5
hwImaGroupMinNumRxLinks
Minimum number of receive links required to be Active for the IMA group to be in the Operational state.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.6
hwImaGroupTxTimingRefLink
The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer. The distinguished value of zero may be used if no…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.176.1.1.1.7
hwImaGroupTxImaId
The IMA ID currently in use by the near-end IMA function.
columnInteger32.1.3.6.1.4.1.2011.5.25.176.1.1.1.9