HUAWEI-DSLAM-VPLS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
7
Rows
7
Columns
82
.1.3.6.1.4.1.2011.5.115.1.1 · 1 row entry · 26 columns
This table specifies the information for VSI.
The index of this table is hwVplsVsiName.
hwVplsEntry entry .1.3.6.1.4.1.2011.5.115.1.1.1
This table specifies the information for VSI.
The index of this entry is hwVplsVsiName.
Indexes
hwVplsVsiName
Column Syntax OID
hwVplsVsiName
This object indicates the VSI's name.
VSI name is a string of 1-15 characters.
There are all together 63 valid characters for the name.
These characters include the following:
uppercase and low…
OctetString
Constraints:
range: 1-15
.1.3.6.1.4.1.2011.5.115.1.1.1.1
hwVplsPwSignal
This object indicates the signal type.
If the signal type is LDP, VSI-ID must be designated.
After the signal type is configured, the configuration cannot be modified.
Options:
1. unknown(0) -indicates signal type is…
Enumerationr/w
Enumerated Values:
0unknown
1ldp
.1.3.6.1.4.1.2011.5.115.1.1.1.2
hwVplsVsiID
This object indicates the VSI ID.
The default value is 0, it means VSI ID is not configured.
After the VSI ID is configured, the configuration cannot be modified.
Unsigned32r/w
Constraints:
range: 0-4294967294
.1.3.6.1.4.1.2011.5.115.1.1.1.3
hwVplsVsiEncapType
This object indicates the VSI's encapsulation type.
Options:
1. tagged(4) -indicates VSI's encapsulation type is tagged
2. raw(5) -indicates VSI's encapsulation type is raw
Enumerationr/w
Enumerated Values:
4tagged
5raw
.1.3.6.1.4.1.2011.5.115.1.1.1.4
hwVplsAdminStatus
VSI's admin status.
Options:
1. up(1) -indicates VSI's status up
2. down(2) -indicates VSI's status down
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.2011.5.115.1.1.1.5
hwVplsVsiState
This object indicates the VSI's run state.
Options:
1. up(1) -indicates VSI's state is up
2. down(2) -indicates VSI's state is down
3. admindown(3) -indicates VSI is shut down
Enumeration
Enumerated Values:
1up
2down
3admindown
.1.3.6.1.4.1.2011.5.115.1.1.1.6
hwVplsDescription
This object indicates the description information.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.2011.5.115.1.1.1.7
hwVplsMtu
This object indicates the VPLS's MTU.
Unsigned32r/w
Constraints:
range: 328-65535
.1.3.6.1.4.1.2011.5.115.1.1.1.8
hwVplsAcIsolateFlag
This object indicates whether the AC and Spoke-PW in the VSI is isolated
Options:
1. enable(1) -indicates the AC and Spoke-PW in the VSI is isolated
2. disable(2) -indicates the AC and Spoke-PW in the VSI is not isol…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.2011.5.115.1.1.1.9
hwVplsIgnoreAcState
This object indicates the enable sign of the ignorer of AC state.
Options:
1. enable(1) -indicates that the ignore AC state function is enabled
2. disable(2) -indicates that the ignore AC state function is disabled
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.2011.5.115.1.1.1.10
hwVplsFlowLabel
Indicates the stream label classification rule in the transmit direction.
Options:
1. sip(0) -Sets the stream label classification rule based on the source IP address
2. dip(1) -Sets the stream label classification r…
Bitsr/w
Enumerated Values:
0sip
1dip
2smac
3dmac
.1.3.6.1.4.1.2011.5.115.1.1.1.11
hwVplsFlowLabelCapabilities
Indicates the VSI's flow label capability.
Options:
1. receive(0) -indicates the flow label capability in the receive direction is enabled
2. transmit(1) -indicates the flow label capability in the transmit direction …
Bitsr/w
Enumerated Values:
0receive
1transmit
.1.3.6.1.4.1.2011.5.115.1.1.1.12
hwVplsControlWord
Defines if the control word will be sent with each packet
by the local node. Some PW types mandate the use of a
control word, and in such cases, the value configured for
this object has no effect on the existence of th…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.2011.5.115.1.1.1.13
hwVplsMacLimitAction
This object indicates the processing mode when the MAC learning table is full.
Options:
1. discard(1) -indicates that the MAC limit action is discard
2. forward(2) -indicates that the MAC limit action …
Enumerationr/w
Enumerated Values:
1discard
2forward
.1.3.6.1.4.1.2011.5.115.1.1.1.14
hwVplsMacLimitAlarm
This object indicates whether send trap when the MAC learning table is full.
Options:
1. enable(1) -indicates that the mac limit alarm function is enabled
2. disable(2) -indicates that the mac limit a…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.2011.5.115.1.1.1.15
hwVplsMaxMacCount
This object indicates how many MAC address can be learned in the VSI.
0 indicates disable MAC learning.
Unsigned32r/w
Constraints:
range: 0-32768
.1.3.6.1.4.1.2011.5.115.1.1.1.16
hwVplsTrafficSuppressUnicastUp
Indicates the upstream unknown unicast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and corresponding bandwidth ranges are listed a…
Unsigned32r/w
Constraints:
range: 0-13
.1.3.6.1.4.1.2011.5.115.1.1.1.17
hwVplsTrafficSuppressUnicastDown
Indicates the downstream unknown unicast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and corresponding bandwidth ranges are listed…
Unsigned32r/w
Constraints:
range: 0-13
.1.3.6.1.4.1.2011.5.115.1.1.1.18
hwVplsTrafficSuppressMulticastUp
Indicates the upstream unknown multicast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and corresponding bandwidth ranges are listed…
Unsigned32r/w
Constraints:
range: 0-13
.1.3.6.1.4.1.2011.5.115.1.1.1.19
hwVplsTrafficSuppressMulticastDown
Indicates the downstream unknown multicast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and corresponding bandwidth ranges are list…
Unsigned32r/w
Constraints:
range: 0-13
.1.3.6.1.4.1.2011.5.115.1.1.1.20
hwVplsTrafficSuppressBroadcastUp
Indicates the upstream broadcast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and corresponding bandwidth ranges are listed as foll…
Unsigned32r/w
Constraints:
range: 0-13
.1.3.6.1.4.1.2011.5.115.1.1.1.21
hwVplsTrafficSuppressBroadcastDown
Indicates the downstream broadcast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and corresponding bandwidth ranges are listed as fo…
Unsigned32r/w
Constraints:
range: 0-13
.1.3.6.1.4.1.2011.5.115.1.1.1.22
hwVplsPriMappingProfileName
QoS priority mapping profile name for VSI, a string of 1-32 characters.
There are all together 92 valid characters for the name.
These characters include the following:
uppercase and lowercase English letters (52 charac…
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.2011.5.115.1.1.1.23
hwVplsStatisticReset
Clear the traffic statistics of all PW and AC for this VSI.
Options:
1. reset(1) -clear the traffic statistics of all PW and AC for this VSI
Enumerationr/w
Enumerated Values:
1reset
.1.3.6.1.4.1.2011.5.115.1.1.1.24
hwVplsRowStatus
For creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAn…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.2011.5.115.1.1.1.25
hwVplsTnlPolicy
Used to configure the tunnel policy used by the VSI.
OctetStringr/w
Constraints:
range: 0-39
.1.3.6.1.4.1.2011.5.115.1.1.1.26
.1.3.6.1.4.1.2011.5.115.1.2 · 1 row entry · 5 columns
This table specifies the information for VPLS PW.
The index of this table is pwIndex.
hwVplsPwEntry entry .1.3.6.1.4.1.2011.5.115.1.2.1
This table specifies the information for VPLS PW.
The index of this entry is pwIndex.
Indexes
PW-STD-MIBpwIndex
Column Syntax OID
hwVplsPwMaxMacCount
This object indicates how many MAC address can be learned in the PW.
0 indicates disable MAC learning.
Unsigned32r/w
Constraints:
range: 0-32768
.1.3.6.1.4.1.2011.5.115.1.2.1.1
hwVplsPwBindType
This object indicates the type of PW.
Options:
1. mesh(1) -indicates the bind type of the PW is mesh
2. spoken(2) -indicates the bind type of the PW is spoken
Enumerationr/w
Enumerated Values:
1mesh
2spoken
.1.3.6.1.4.1.2011.5.115.1.2.1.2
hwVplsPwProtectGroupName
This object indicates the VPLS protect group name.
VPLS protect group name is a string of 1-15 characters.
There are all together 63 valid characters for the name.
These characters include the following:
OctetString
Constraints:
range: 0-15
.1.3.6.1.4.1.2011.5.115.1.2.1.3
hwVplsPwProtectPreference
This object indicates the preference of PW in a VPLS PW protect group.
Options:
1. primary(1) -indicates the primary member of the PW protect group
2. secondary(2) -indicates the secondary member of the PW protect gro…
Enumeration
Enumerated Values:
1primary
2secondary
.1.3.6.1.4.1.2011.5.115.1.2.1.4
hwVplsPwProtectActiveState
This object indicates the active state of PW in a VPLS PW protect group.
Options:
1. down(1) -indicates that the member of the PW protect group is down
2. active(2) -indicates that the member of the PW protect group…
Enumeration
Enumerated Values:
1down
2active
3standby
.1.3.6.1.4.1.2011.5.115.1.2.1.5
.1.3.6.1.4.1.2011.5.115.1.3 · 1 row entry · 1 columns
This table specifies the information for VPLS PW binding.
The indexes of this table are hwVplsVsiName and pwIndex.
hwVplsPwBindEntry entry .1.3.6.1.4.1.2011.5.115.1.3.1
This table specifies the information for VPLS PW binding.
The indexes of this entry are hwVplsVsiName and pwIndex.
Indexes
hwVplsVsiName PW-STD-MIBpwIndex
Column Syntax OID
hwVplsPwBindRowStatus
For creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAn…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.2011.5.115.1.3.1.1
.1.3.6.1.4.1.2011.5.115.1.4 · 1 row entry · 5 columns
This table specifies the information for VPLS AC.
The indexes of this table are hwVplsVsiName and hwVplsAcIndex.
hwVplsAcEntry entry .1.3.6.1.4.1.2011.5.115.1.4.1
This table specifies the information for VPLS AC.
The indexes of this entry are hwVplsVsiName and hwVplsAcIndex.
Indexes
hwVplsVsiName hwVplsAcIndex
Column Syntax OID
hwVplsAcIndex
AC index of VPLS AC.
For VLAN type AC, VLAN ID range is 2-4093.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.4.1.1
hwVplsAcState
This object indicates state of the AC.
Options:
1. up(1) -indicates switch AC's state is up
2. down(2) -indicates switch AC's state is down
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.2011.5.115.1.4.1.2
hwVplsAcMaxMacCount
This object indicates how many MAC address can be learned in the AC.
0 indicates disable MAC learning.
Unsigned32r/w
Constraints:
range: 0-32768
.1.3.6.1.4.1.2011.5.115.1.4.1.3
hwVplsAcStatisticSwitch
Used to enable or disable the traffic statistic function of AC.
Options:
1. enable(1) -indicates that the traffic statistic function is enabled
2. disable(2) -indicates that the traffic statistic function is disabled
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.2011.5.115.1.4.1.4
hwVplsAcRowStatus
For creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAn…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.2011.5.115.1.4.1.5
.1.3.6.1.4.1.2011.5.115.1.5 · 1 row entry · 9 columns
This table specifies the information for VPLS protect group.
The indexes of this table are hwVplsVsiName and hwVplsProtectGroupName.
hwVplsProtectGroupEntry entry .1.3.6.1.4.1.2011.5.115.1.5.1
This table specifies the information for VPLS protect group.
The indexes of this entry are hwVplsVsiName and hwVplsProtectGroupName.
Indexes
hwVplsVsiName hwVplsProtectGroupName
Column Syntax OID
hwVplsProtectGroupName
This object indicates the VPLS protect group name.
VPLS protect group name is a string of 1-15 characters.
There are all together 63 valid characters for the name.
These characters include the following:
uppercase and l…
OctetString
Constraints:
range: 1-15
.1.3.6.1.4.1.2011.5.115.1.5.1.1
hwVplsProtectGroupProtectMode
Indicates the mode of the VPLS redundancy.
Options:
1. master(1) -indicates that the VPLS redundancy mode is master
2. independent(2) -indicates that the VPLS redundancy mode is independent
Enumerationr/w
Enumerated Values:
1master
2independent
.1.3.6.1.4.1.2011.5.115.1.5.1.2
hwVplsProtectGroupReroutePolicy
This object indicates reroute delay policy of VPLS.
Options:
1. revertive(1) -indicates that automatic recovery is allowed
2. nonRevertive(2) -indicates that the traffic will not be switched back to the working …
Enumerationr/w
Enumerated Values:
1revertive
2nonRevertive
.1.3.6.1.4.1.2011.5.115.1.5.1.3
hwVplsProtectGroupRerouteDelay
Indicates the recover time.
Range: 0,10-600
Unit: second
Unsigned32r/w
Constraints:
range: 10-600
range: 0-0
.1.3.6.1.4.1.2011.5.115.1.5.1.4
hwVplsProtectGroupStreamDualReceiving
This object indicates the receive mode of VPLS.
Options:
1. enable(1) -indicates that the stream receiving mode of the VPLS redundancy is dual
2. disable(2) -indicates that the stream receiving mode of the VPLS redunda…
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.2011.5.115.1.5.1.5
hwVplsProtectGroupSwitch
Used to switch VPLS to primary PW or secondary PW.
Options:
1. toPrimaryPW(1) -indicates switch from secondary PW to primary PW
2. toSecondaryPW(2) -indicates switch from primary PW to secondary PW
Enumerationr/w
Enumerated Values:
1toPrimaryPW
2toSecondaryPW
.1.3.6.1.4.1.2011.5.115.1.5.1.6
hwVplsProtectGroupPrimaryPwIndex
The value that represents the corresponding primary PW in the pwTable.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.5.1.7
hwVplsProtectGroupSecondaryPwIndex
The value that represents the corresponding secondary PW in the pwTable.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.5.1.8
hwVplsProtectGroupRowStatus
For creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAn…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.2011.5.115.1.5.1.9
.1.3.6.1.4.1.2011.5.115.1.6 · 1 row entry · 33 columns
This table is used to query or reset the traffic statistics of VPLS AC.
The indexes of this table are hwVplsVsiName and hwVplsAcIndex.
hwVplsExtAcStatisticEntry entry .1.3.6.1.4.1.2011.5.115.1.6.1
This table is used to query or reset the traffic statistics of VPLS AC.
The indexes of this entry are hwVplsVsiName and hwVplsAcIndex.
Indexes
hwVplsVsiName hwVplsAcIndex
Column Syntax OID
hwVplsExtAcStatisticUpstreamOctectsP0
The total number of upstream octets with priority equal to 0.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.1
hwVplsExtAcStatisticUpstreamPacketsP0
The total number of upstream packets with priority equal to 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.2
hwVplsExtAcStatisticUpstreamOctectsP1
The total number of upstream octets with priority equal to 1.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.3
hwVplsExtAcStatisticUpstreamPacketsP1
The total number of upstream packets with priority equal to 1.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.4
hwVplsExtAcStatisticUpstreamOctectsP2
The total number of upstream octets with priority equal to 2.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.5
hwVplsExtAcStatisticUpstreamPacketsP2
The total number of upstream packets with priority equal to 2.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.6
hwVplsExtAcStatisticUpstreamOctectsP3
The total number of upstream octets with priority equal to 3.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.7
hwVplsExtAcStatisticUpstreamPacketsP3
The total number of upstream packets with priority equal to 3.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.8
hwVplsExtAcStatisticUpstreamOctectsP4
The total number of upstream octets with priority equal to 4.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.9
hwVplsExtAcStatisticUpstreamPacketsP4
The total number of upstream packets with priority equal to 4.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.10
hwVplsExtAcStatisticUpstreamOctectsP5
The total number of upstream octets with priority equal to 5.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.11
hwVplsExtAcStatisticUpstreamPacketsP5
The total number of upstream packets with priority equal to 5.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.12
hwVplsExtAcStatisticUpstreamOctectsP6
The total number of upstream octets with priority equal to 6.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.13
hwVplsExtAcStatisticUpstreamPacketsP6
The total number of upstream packets with priority equal to 6.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.14
hwVplsExtAcStatisticUpstreamOctectsP7
The total number of upstream octets with priority equal to 7.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.15
hwVplsExtAcStatisticUpstreamPacketsP7
The total number of upstream packets with priority equal to 7.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.16
hwVplsExtAcStatisticDownstreamOctectsP0
The total number of downstream octets with priority equal to 0.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.17
hwVplsExtAcStatisticDownstreamPacketsP0
The total number of downstream packets with priority equal to 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.18
hwVplsExtAcStatisticDownstreamOctectsP1
The total number of downstream octets with priority equal to 1.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.19
hwVplsExtAcStatisticDownstreamPacketsP1
The total number of downstream packets with priority equal to 1.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.20
hwVplsExtAcStatisticDownstreamOctectsP2
The total number of downstream octets with priority equal to 2.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.21
hwVplsExtAcStatisticDownstreamPacketsP2
The total number of downstream packets with priority equal to 2.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.22
hwVplsExtAcStatisticDownstreamOctectsP3
The total number of downstream octets with priority equal to 3.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.23
hwVplsExtAcStatisticDownstreamPacketsP3
The total number of downstream packets with priority equal to 3.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.24
hwVplsExtAcStatisticDownstreamOctectsP4
The total number of downstream octets with priority equal to 4.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.25
hwVplsExtAcStatisticDownstreamPacketsP4
The total number of downstream packets with priority equal to 4.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.26
hwVplsExtAcStatisticDownstreamOctectsP5
The total number of downstream octets with priority equal to 5.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.27
hwVplsExtAcStatisticDownstreamPacketsP5
The total number of downstream packets with priority equal to 5.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.28
hwVplsExtAcStatisticDownstreamOctectsP6
The total number of downstream octets with priority equal to 6.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.29
hwVplsExtAcStatisticDownstreamPacketsP6
The total number of downstream packets with priority equal to 6.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.30
hwVplsExtAcStatisticDownstreamOctectsP7
The total number of downstream octets with priority equal to 7.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.115.1.6.1.31
hwVplsExtAcStatisticDownstreamPacketsP7
The total number of downstream packets with priority equal to 7.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.6.1.32
hwVplsExtAcStatisticReset
Reset the traffic statistics of this VPLS AC.
Options:
1. reset(1) -reset the traffic statistics of this VPLS AC
Enumerationr/w
Enumerated Values:
1reset
.1.3.6.1.4.1.2011.5.115.1.6.1.33
.1.3.6.1.4.1.2011.5.115.1.7 · 1 row entry · 3 columns
This table specifies the information for switch PW.
The index of this table is pwIndex.
hwSwitchPwBindEntry entry .1.3.6.1.4.1.2011.5.115.1.7.1
This table specifies the information for switch PW.
The index of this entry is pwIndex.
Indexes
PW-STD-MIBpwIndex
Column Syntax OID
hwSwitchPwAttachedPwindex
This object indicates the pwindex of attached PW
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.115.1.7.1.1
hwSwitchPwState
This object indicates state of switch PW.
Options:
1. up(1) -indicates switch PW's state is up
2. down(2) -indicates switch PW's state is down
3. admindown(3) -indicates switch PW's state is shut down
Enumeration
Enumerated Values:
1up
2down
3admindown
.1.3.6.1.4.1.2011.5.115.1.7.1.2
hwSwitchPwBindRowStatus
For creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAn…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.2011.5.115.1.7.1.3